1
|
Li M, Liu M, Qi F, Lin FR, Jen AKY. Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications. Chem Rev 2024; 124:2138-2204. [PMID: 38421811 DOI: 10.1021/acs.chemrev.3c00396] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/02/2024]
Abstract
Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.
Collapse
Affiliation(s)
- Mingliang Li
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Hong Kong Institute for Clean Energy, City University of Hong Kong, Kowloon, Hong Kong 999077, China
| | - Ming Liu
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Hong Kong Institute for Clean Energy, City University of Hong Kong, Kowloon, Hong Kong 999077, China
| | - Feng Qi
- Department of Chemistry, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Hong Kong Institute for Clean Energy, City University of Hong Kong, Kowloon, Hong Kong 999077, China
| | - Francis R Lin
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Department of Chemistry, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Hong Kong Institute for Clean Energy, City University of Hong Kong, Kowloon, Hong Kong 999077, China
| | - Alex K-Y Jen
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Department of Chemistry, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Hong Kong Institute for Clean Energy, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Department of Materials Science and Engineering, University of Washington, Seattle, Washington 98195, United States
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Kowloon, Hong Kong 999077, China
| |
Collapse
|
2
|
Li Y, Xie J, Sun L, Zeng J, Zhou L, Hao Z, Pan L, Ye J, Wang P, Li Y, Xu J, Shi Y, Wang X, He D. Monolayer Organic Crystals for Ultrahigh Performance Molecular Diodes. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305100. [PMID: 38145961 PMCID: PMC10933607 DOI: 10.1002/advs.202305100] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2023] [Revised: 12/07/2023] [Indexed: 12/27/2023]
Abstract
Molecular diodes are of considerable interest for the increasing technical demands of device miniaturization. However, the molecular diode performance remains contact-limited, which represents a major challenge for the advancement of rectification ratio and conductance. Here, it is demonstrated that high-quality ultrathin organic semiconductors can be grown on several classes of metal substrates via solution-shearing epitaxy, with a well-controlled number of layers and monolayer single crystal over 1 mm. The crystals are atomically smooth and pinhole-free, providing a native interface for high-performance monolayer molecular diodes. As a result, the monolayer molecular diodes show record-high rectification ratio up to 5 × 108 , ideality factor close to unity, aggressive unit conductance over 103 S cm-2 , ultrahigh breakdown electric field, excellent electrical stability, and well-defined contact interface. Large-area monolayer molecular diode arrays with 100% yield and excellent uniformity in the diode metrics are further fabricated. These results suggest that monolayer molecular crystals have great potential to build reliable, high-performance molecular diodes and deeply understand their intrinsic electronic behavior.
Collapse
Affiliation(s)
- Yating Li
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Jiacheng Xie
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Li Sun
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Junpeng Zeng
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Liqi Zhou
- National Laboratory of Solid‐State MicrostructuresJiangsu Key Laboratory of Artificial Functional MaterialsCollege of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210023China
| | - Ziqian Hao
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Lijia Pan
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Jiandong Ye
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Peng Wang
- Department of PhysicsUniversity of WarwickCoventryCV4 7ALUnited Kingdom
| | - Yun Li
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Jian‐Bin Xu
- Department of Electronic Engineering and Materials Science and Technology Research CenterThe Chinese University of Hong KongHong Kong999077China
| | - Yi Shi
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| | - Xinran Wang
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
- School of Integrated CircuitsNanjing UniversitySuzhou215163China
| | - Daowei He
- National Laboratory of Solid‐State MicrostructuresSchool of Electronic Science and EngineeringKey Lab of Optoelectronic Devices and Systems with Extreme Performances and Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing210093China
| |
Collapse
|
3
|
Lee J, Kim E, Cho J, Seok H, Woo G, Yu D, Jung G, Hwangbo H, Na J, Im I, Kim T. Remote-Controllable Interfacial Electron Tunneling at Heterogeneous Molecular Junctions via Tip-Induced Optoelectrical Engineering. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305512. [PMID: 38057140 PMCID: PMC10837351 DOI: 10.1002/advs.202305512] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2023] [Revised: 10/31/2023] [Indexed: 12/08/2023]
Abstract
Molecular electronics enables functional electronic behavior via single molecules or molecular self-assembled monolayers, providing versatile opportunities for hybrid molecular-scale electronic devices. Although various molecular junction structures are constructed to investigate charge transfer dynamics, significant challenges remain in terms of interfacial charging effects and far-field background signals, which dominantly block the optoelectrical observation of interfacial charge transfer dynamics. Here, tip-induced optoelectrical engineering is presented that synergistically correlates photo-induced force microscopy and Kelvin probe force microscopy to remotely control and probe the interfacial charge transfer dynamics with sub-10 nm spatial resolution. Based on this approach, the optoelectrical origin of metal-molecule interfaces is clearly revealed by the nanoscale heterogeneity of the tip-sample interaction and optoelectrical reactivity, which theoretically aligned with density functional theory calculations. For a practical device-scale demonstration of tip-induced optoelectrical engineering, interfacial tunneling is remotely controlled at a 4-inch wafer-scale metal-insulator-metal capacitor, facilitating a 5.211-fold current amplification with the tip-induced electrical field. In conclusion, tip-induced optoelectrical engineering provides a novel strategy to comprehensively understand interfacial charge transfer dynamics and a non-destructive tunneling control platform that enables real-time and real-space investigation of ultrathin hybrid molecular systems.
Collapse
Affiliation(s)
- Jinhyoung Lee
- School of Mechanical Engineering, Sungkyunkwan University (SKKU), Suwon-si, Gyeonggi-do, 16419, Republic of Korea
| | - Eungchul Kim
- AVP process development team, Samsung Electronics, Cheonan-si, Chungcheongnam-do, 31086, South Korea
| | - Jinill Cho
- School of Mechanical Engineering, Sungkyunkwan University (SKKU), Suwon-si, Gyeonggi-do, 16419, Republic of Korea
| | - Hyunho Seok
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, Republic of Korea
- Department of Nano Science and Technology, Sungkyunkwan University, Suwon, 16419, Republic of Korea
| | - Gunhoo Woo
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, Republic of Korea
- Department of Nano Science and Technology, Sungkyunkwan University, Suwon, 16419, Republic of Korea
| | - Dayoung Yu
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, Republic of Korea
- Department of Nano Science and Technology, Sungkyunkwan University, Suwon, 16419, Republic of Korea
| | - Gooeun Jung
- Park Systems Corp, R&D Center, Suwon, 16229, Republic of Korea
| | - Hyeon Hwangbo
- Park Systems Corp, R&D Center, Suwon, 16229, Republic of Korea
| | - Jinyoung Na
- Park Systems Corp, R&D Center, Suwon, 16229, Republic of Korea
| | - Inseob Im
- Park Systems Corp, R&D Center, Suwon, 16229, Republic of Korea
| | - Taesung Kim
- School of Mechanical Engineering, Sungkyunkwan University (SKKU), Suwon-si, Gyeonggi-do, 16419, Republic of Korea
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, Republic of Korea
- Department of Nano Science and Technology, Sungkyunkwan University, Suwon, 16419, Republic of Korea
- Department of Nano Engineering, Sungkyunkwan University, Suwon, 16419, Republic of Korea
| |
Collapse
|
4
|
Kong GD, Jang J, Choi S, Lim G, Kim IS, Ohto T, Maeda S, Tada H, Yoon HJ. Dynamic Variation of Rectification Observed in Supramolecular Mixed Mercaptoalkanoic Acid. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305997. [PMID: 37726226 DOI: 10.1002/smll.202305997] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/17/2023] [Revised: 08/29/2023] [Indexed: 09/21/2023]
Abstract
Functionality in molecular electronics relies on inclusion of molecular orbital energy level within a transmission window. This can be achieved by designing the active molecule with accessible energy levels or by widening the window. While many studies have adopted the first approach, the latter is challenging because defects in the active molecular component cause low breakdown voltages. Here, it is shown that control over the packing structure of monolayer via supramolecular mixing transforms an inert molecule into a highly tunable rectifier. Binary mixed monolayer composed of alkanethiolates with and without carboxylic acid head group as a proof of concept is formed via a surface-exchange reaction. The monolayer withstands high voltages up to |4.5 V| and shows a dynamic rectification-external bias relationship in magnitude and polarity. Sub-highest occupied molecular orbital (HOMO) levels activated by the widened transmission window account for these observations. This work demonstrates that simple supramolecular mixing can imbue new electrical properties in electro-inactive organic molecules.
Collapse
Affiliation(s)
- Gyu Don Kong
- Department of Chemistry, Korea University, Seoul, 02841, South Korea
| | - Jiung Jang
- Department of Chemistry, Korea University, Seoul, 02841, South Korea
| | - Suin Choi
- Department of Chemistry, Korea University, Seoul, 02841, South Korea
| | - Gayoung Lim
- Department of Chemistry, Korea University, Seoul, 02841, South Korea
| | - In Soo Kim
- Nanophotonics Research Center, Korea Institute of Science and Technology, Seoul, 02792, South Korea
- KIST-SKKU Carbon-Neutral Research Center, Sungkyunkwan University (SKKU), Suwon, 16419, South Korea
| | - Tatsuhiko Ohto
- Department of Materials Design Innovation Engineering, Nagoya University, Furo-cho, Chikusa-ku, Aichi, 464-8603, Japan
- Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka, 560-8531, Japan
| | - Seiya Maeda
- Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka, 560-8531, Japan
| | - Hirokazu Tada
- Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama, Toyonaka, Osaka, 560-8531, Japan
| | - Hyo Jae Yoon
- Department of Chemistry, Korea University, Seoul, 02841, South Korea
| |
Collapse
|
5
|
Amamizu N, Nishida M, Sasaki K, Kishi R, Kitagawa Y. Theoretical Study on the Open-Shell Electronic Structure and Electron Conductivity of [18]Annulene as a Molecular Parallel Circuit Model. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 14:98. [PMID: 38202553 PMCID: PMC10781064 DOI: 10.3390/nano14010098] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2023] [Revised: 12/19/2023] [Accepted: 12/21/2023] [Indexed: 01/12/2024]
Abstract
Herein, the electron conductivities of [18]annulene and its derivatives are theoretically examined as a molecular parallel circuit model consisting of two linear polyenes. Their electron conductivities are estimated by elastic scattering Green's function (ESGF) theory and density functional theory (DFT) methods. The calculated conductivity of the [18]annulene does not follow the classical conductivity, i.e., Ohm's law, suggesting the importance of a quantum interference effect in single molecules. By introducing electron-withdrawing groups into the annulene framework, on the other hand, a spin-polarized electronic structure appears, and the quantum interference effect is significantly suppressed. In addition, the total current is affected by the spin polarization because of the asymmetry in the coupling constant between the molecule and electrodes. From these results, it is suggested that the electron conductivity as well as the quantum interference effect of π-conjugated molecular systems can be designed using their open-shell nature, which is chemically controlled by the substituents.
Collapse
Affiliation(s)
- Naoka Amamizu
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan; (M.N.); (K.S.); (R.K.)
| | - Mitsuhiro Nishida
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan; (M.N.); (K.S.); (R.K.)
| | - Keisuke Sasaki
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan; (M.N.); (K.S.); (R.K.)
| | - Ryohei Kishi
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan; (M.N.); (K.S.); (R.K.)
- Center for Quantum Information and Quantum Biology (QIQB), International Advanced Research Institute (IARI), Osaka University, Toyonaka, Osaka 560-0043, Japan
- Research Center for Solar Energy Chemistry (RCSEC), Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan
- Innovative Catalysis Science Division, Institute for Open and Transdisciplinary Research Initiatives (ICS-OTRI), Osaka University, Suita, Osaka 565-0871, Japan
| | - Yasutaka Kitagawa
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan; (M.N.); (K.S.); (R.K.)
- Center for Quantum Information and Quantum Biology (QIQB), International Advanced Research Institute (IARI), Osaka University, Toyonaka, Osaka 560-0043, Japan
- Research Center for Solar Energy Chemistry (RCSEC), Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531, Japan
- Innovative Catalysis Science Division, Institute for Open and Transdisciplinary Research Initiatives (ICS-OTRI), Osaka University, Suita, Osaka 565-0871, Japan
- Spintronics Research Network Division, Institute for Open and Transdisciplinary Research Initiatives (SRN-OTRI), Osaka University, Toyonaka, Osaka 560-8531, Japan
| |
Collapse
|
6
|
Kirsch C, Naujoks T, Haizmann P, Frech P, Peisert H, Chassé T, Brütting W, Scheele M. Zwitterionic Carbazole Ligands Enhance the Stability and Performance of Perovskite Nanocrystals in Light-Emitting Diodes. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37367642 DOI: 10.1021/acsami.3c05756] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/28/2023]
Abstract
We introduce a new carbazole-based zwitterionic ligand (DCzGPC) synthesized via Yamaguchi esterification which enhances the efficiency of lead halide perovskite (LHP) nanocrystals (NCs) in light-emitting diodes (LED). A facile ligand exchange of the native ligand shell, monitored by nuclear magnetic resonance (NMR), ultraviolet-visible (UV-vis), and photoluminescence (PL) spectroscopy, enables more stable and efficient LHP NCs. The improved stability is demonstrated in solution and solid-state LEDs, where the NCs exhibit prolonged luminescence lifetimes and improved luminance, respectively. These results represent a promising strategy to enhance the stability of LHP NCs and to tune their optoelectronic properties for further application in LEDs or solar cells.
Collapse
Affiliation(s)
- Christopher Kirsch
- Institut für Physikalische und Theoretische Chemie, Universität Tübingen, 72076 Tübingen, Germany
| | - Tassilo Naujoks
- Institut für Physik, Universität Augsburg, Augsburg 86135, Germany
| | - Philipp Haizmann
- Institut für Physikalische und Theoretische Chemie, Universität Tübingen, 72076 Tübingen, Germany
| | - Philipp Frech
- Institut für Physikalische und Theoretische Chemie, Universität Tübingen, 72076 Tübingen, Germany
| | - Heiko Peisert
- Institut für Physikalische und Theoretische Chemie, Universität Tübingen, 72076 Tübingen, Germany
| | - Thomas Chassé
- Institut für Physikalische und Theoretische Chemie, Universität Tübingen, 72076 Tübingen, Germany
| | | | - Marcus Scheele
- Institut für Physikalische und Theoretische Chemie, Universität Tübingen, 72076 Tübingen, Germany
| |
Collapse
|
7
|
Li T, Bandari VK, Schmidt OG. Molecular Electronics: Creating and Bridging Molecular Junctions and Promoting Its Commercialization. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209088. [PMID: 36512432 DOI: 10.1002/adma.202209088] [Citation(s) in RCA: 14] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/02/2022] [Revised: 11/28/2022] [Indexed: 06/02/2023]
Abstract
Molecular electronics is driven by the dream of expanding Moore's law to the molecular level for next-generation electronics through incorporating individual or ensemble molecules into electronic circuits. For nearly 50 years, numerous efforts have been made to explore the intrinsic properties of molecules and develop diverse fascinating molecular electronic devices with the desired functionalities. The flourishing of molecular electronics is inseparable from the development of various elegant methodologies for creating nanogap electrodes and bridging the nanogap with molecules. This review first focuses on the techniques for making lateral and vertical nanogap electrodes by breaking, narrowing, and fixed modes, and highlights their capabilities, applications, merits, and shortcomings. After summarizing the approaches of growing single molecules or molecular layers on the electrodes, the methods of constructing a complete molecular circuit are comprehensively grouped into three categories: 1) directly bridging one-molecule-electrode component with another electrode, 2) physically bridging two-molecule-electrode components, and 3) chemically bridging two-molecule-electrode components. Finally, the current state of molecular circuit integration and commercialization is discussed and perspectives are provided, hoping to encourage the community to accelerate the realization of fully scalable molecular electronics for a new era of integrated microsystems and applications.
Collapse
Affiliation(s)
- Tianming Li
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology, 09126, Chemnitz, Germany
- Material Systems for Nanoelectronics, Chemnitz University of Technology, 09111, Chemnitz, Germany
| | - Vineeth Kumar Bandari
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology, 09126, Chemnitz, Germany
- Material Systems for Nanoelectronics, Chemnitz University of Technology, 09111, Chemnitz, Germany
| | - Oliver G Schmidt
- Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology, 09126, Chemnitz, Germany
- Material Systems for Nanoelectronics, Chemnitz University of Technology, 09111, Chemnitz, Germany
- Nanophysics, Dresden University of Technology, 01069, Dresden, Germany
| |
Collapse
|
8
|
Buchheit R, Niebuur BJ, González-García L, Kraus T. Surface polarization, field homogeneity, and dielectric breakdown in ordered and disordered nanodielectrics based on gold-polystyrene superlattices. NANOSCALE 2023; 15:7526-7536. [PMID: 37022092 DOI: 10.1039/d3nr01038d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
Hybrid dielectrics were prepared from dispersions of nanoparticles with gold cores (diameters from 2.9 nm to 8.2 nm) and covalently bound thiol-terminated polystyrene shells (5000 Da and 11 000 Da) in toluene. Their microstructure was investigated with small angle X-ray scattering and transmission electron microscopy. The particles arranged in nanodielectric layers with either face-centered cubic or random packing, depending on the ligand length and core diameter. Thin film capacitors were prepared by spin-coating inks on silicon substrates, contacted with sputtered aluminum electrodes, and characterized with impedance spectroscopy between 1 Hz and 1 MHz. The dielectric constants were dominated by polarization at the gold-polystyrene interfaces that we could precisely tune via the core diameter. There was no difference in the dielectric constant between random and supercrystalline particle packings, but the dielectric losses depended on the layer structure. A model that combines Maxwell-Wagner-Sillars theory and percolation theory described the relationship of the specific interfacial area and the dielectric constant quantitatively. The electric breakdown of the nanodielectric layers sensitively depended on particle packing. A highest breakdown field strength of 158.7 MV m-1 was found for the sample with 8.2 nm cores and short ligands that had a face-centered cubic structure. Breakdown apparently is initiated at the microscopic maxima of the electric field that depends on particle packing. The relevance of the results for industrially produced devices was demonstrated on inkjet printed thin film capacitors with an area of 0.79 mm2 on aluminum coated PET foils that retained their capacity of 1.24 ± 0.01 nF@10 kHz during 3000 bending cycles.
Collapse
Affiliation(s)
- Roman Buchheit
- INM-Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken, Germany
| | - Bart-Jan Niebuur
- INM-Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken, Germany
| | - Lola González-García
- INM-Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken, Germany
- Department of Materials Science and Engineering, Saarland University, Campus D2 2, 66123 Saarbrücken, Germany.
| | - Tobias Kraus
- INM-Leibniz Institute for New Materials, Campus D2 2, 66123 Saarbrücken, Germany
- Colloid and Interface Chemistry, Saarland University, Campus D2 2, 66123 Saarbrücken, Germany.
| |
Collapse
|
9
|
Li X, Ge W, Guo S, Bai J, Hong W. Characterization and Application of Supramolecular Junctions. Angew Chem Int Ed Engl 2023; 62:e202216819. [PMID: 36585932 DOI: 10.1002/anie.202216819] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 12/28/2022] [Accepted: 12/29/2022] [Indexed: 01/01/2023]
Abstract
The convergence of supramolecular chemistry and single-molecule electronics offers a new perspective on supramolecular electronics, and provides a new avenue toward understanding and application of intermolecular charge transport at the molecular level. In this review, we will provide an overview of the advances in the characterization technique for the investigation of intermolecular charge transport, and summarize the experimental investigation of several non-covalent interactions, including π-π stacking interactions, hydrogen bonding, host-guest interactions and σ-σ interactions at the single-molecule level. We will also provide a perspective on supramolecular electronics and discuss the potential applications and future challenges.
Collapse
Affiliation(s)
- Xiaohui Li
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering & College of Materials & IKKEM, Xiamen University, Xiamen, 361005, China
| | - Wenhui Ge
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering & College of Materials & IKKEM, Xiamen University, Xiamen, 361005, China
| | - Shuhan Guo
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering & College of Materials & IKKEM, Xiamen University, Xiamen, 361005, China
| | - Jie Bai
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering & College of Materials & IKKEM, Xiamen University, Xiamen, 361005, China
| | - Wenjing Hong
- State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering & College of Materials & IKKEM, Xiamen University, Xiamen, 361005, China
| |
Collapse
|
10
|
Habib I, Singha K, Hossain M. Recent Progress on Pyridine
N
‐Oxide in Organic Transformations: A Review. ChemistrySelect 2023. [DOI: 10.1002/slct.202204099] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Affiliation(s)
- Imran Habib
- Synthetic Organic Research Laboratory UGC-HRDC (Chemistry) University of North Bengal Siliguri Darjeeling 734013 India
| | - Koustav Singha
- Synthetic Organic Research Laboratory UGC-HRDC (Chemistry) University of North Bengal Siliguri Darjeeling 734013 India
| | - Mossaraf Hossain
- Synthetic Organic Research Laboratory UGC-HRDC (Chemistry) University of North Bengal Siliguri Darjeeling 734013 India
| |
Collapse
|
11
|
Gupta R, Fereiro JA, Bayat A, Pritam A, Zharnikov M, Mondal PC. Nanoscale molecular rectifiers. Nat Rev Chem 2023; 7:106-122. [PMID: 37117915 DOI: 10.1038/s41570-022-00457-8] [Citation(s) in RCA: 18] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 11/30/2022] [Indexed: 01/15/2023]
Abstract
The use of molecules bridged between two electrodes as a stable rectifier is an important goal in molecular electronics. Until recently, however, and despite extensive experimental and theoretical work, many aspects of our fundamental understanding and practical challenges have remained unresolved and prevented the realization of such devices. Recent advances in custom-designed molecular systems with rectification ratios exceeding 105 have now made these systems potentially competitive with existing silicon-based devices. Here, we provide an overview and critical analysis of recent progress in molecular rectification within single molecules, self-assembled monolayers, molecular multilayers, heterostructures, and metal-organic frameworks and coordination polymers. Examples of conceptually important and best-performing systems are discussed, alongside their rectification mechanisms. We present an outlook for the field, as well as prospects for the commercialization of molecular rectifiers.
Collapse
|
12
|
Khalid H, Opodi EM, Song X, Wang Z, Li B, Tian L, Yu X, Hu W. Modulated Structure and Rectification Properties of a Molecular Junction by a Mixed Self-Assembled Monolayer. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:10893-10901. [PMID: 36007164 DOI: 10.1021/acs.langmuir.2c01751] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The organization of the self-assembled monolayer (SAM) determines its electronic structure and so governs the charge transport process and device performance when adopted into a molecular device. We report a systematic study on the supramolecular structure and rectification performance of the ferrocene (11-ferrocenyl-1-undecanethiol, FUT) based SAM modulated by mixed SAM with inert 1-undecanethiol (C11SH) as diluent. We compared mixed SAMs by two different post assembly strategies, i.e., post assembly of C11SH on FUT SAM and post assembly of FUT on C11SH SAM. The organization and structure of FUT in the mixed SAM were extensively studied by cyclic voltammetry (CV) using the Laviron model. Rectification properties of the mixed SAM obtained using eutectic indium gallium (EGaIn) as the top electrode revealed that the magnitude and stability of the rectification ratio (RR) strongly correlated to not only the amount but also the phase structure and orientation of the FUT in the monolayer, resulting in a tunable RR and increased stability. The mixed monolayer achieved an increased performance relative to pure FUT by post assembling FUT on C11SH SAM, which formed an optimally dense and well-packed monolayer with the FUT head resting on the top of the alkane SAM.
Collapse
Affiliation(s)
- Hira Khalid
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Esther Martine Opodi
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Xianneng Song
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Ziyan Wang
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Baili Li
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Lixian Tian
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Xi Yu
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| | - Wenping Hu
- Tianjin Key Laboratory of Molecular Optoelectronic Science, School of Science, Tianjin University & Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072, China
| |
Collapse
|
13
|
Amini S, Chen X, Chua JQI, Tee JS, Nijhuis CA, Miserez A. Interplay between Interfacial Energy, Contact Mechanics, and Capillary Forces in EGaIn Droplets. ACS APPLIED MATERIALS & INTERFACES 2022; 14:28074-28084. [PMID: 35649179 PMCID: PMC9227710 DOI: 10.1021/acsami.2c04043] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2022] [Accepted: 05/16/2022] [Indexed: 06/01/2023]
Abstract
Eutectic gallium-indium (EGaIn) is increasingly employed as an interfacial conductor material in molecular electronics and wearable healthcare devices owing to its ability to be shaped at room temperature, conductivity, and mechanical stability. Despite this emerging usage, the mechanical and physical mechanisms governing EGaIn interactions with surrounding objects─mainly regulated by surface tension and interfacial adhesion─remain poorly understood. Here, using depth-sensing nanoindentation (DSN) on pristine EGaIn/GaOx surfaces, we uncover how changes in EGaIn/substrate interfacial energies regulate the adhesive and contact mechanic behaviors, notably the evolution of EGaIn capillary bridges with distinct capillary geometries and pressures. Varying the interfacial energy by subjecting EGaIn to different chemical environments and by functionalizing the tip with chemically distinct self-assembled monolayers (SAMs), we show that the adhesion forces between EGaIn and the solid substrate can be increased by up to 2 orders of magnitude, resulting in about a 60-fold increase in the elongation of capillary bridges. Our data reveal that by deploying molecular junctions with SAMs of different terminal groups, the trends of charge transport rates, the resistance of monolayers, and the contact interactions between EGaIn and monolayers from electrical characterizations are governed by the interfacial energies as well. This study provides a key understanding into the role of interfacial energy on geometrical characteristics of EGaIn capillary bridges, offering insights toward the fabrication of EGaIn junctions in a controlled fashion.
Collapse
Affiliation(s)
- Shahrouz Amini
- Department
of Biomaterials, Max Planck Institute of
Colloids and Interfaces, 14476 Potsdam, Germany
- Biological
and Biomimetic Materials Laboratory, Center for Sustainable Materials
(SusMat), School of Materials Science and Engineering, Nanyang Technological University (NTU), 50 Nanyang Avenue, Singapore 639798, Singapore
| | - Xiaoping Chen
- Department
of Chemistry and Environment Science, Fujian Province Key Laboratory
of Modern Analytical Science and Separation Technology, Minnan Normal University, Zhangzhou 363000, China
- Department
of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore
| | - Jia Qing Isaiah Chua
- Biological
and Biomimetic Materials Laboratory, Center for Sustainable Materials
(SusMat), School of Materials Science and Engineering, Nanyang Technological University (NTU), 50 Nanyang Avenue, Singapore 639798, Singapore
| | - Jinq Shi Tee
- Department
of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore
| | - Christian A. Nijhuis
- Department
of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore
- Centre
for Advanced 2D Materials and Graphene Research Centre, National University of Singapore, 6 Science Drive 2, Singapore 117546, Singapore
- Hybrid Materials
for Opto-Electronics Group, Department of Molecules and Materials,
MESA+ Institute for Nanotechnology and Molecules Centre, Faculty of Science and Technology, University of Twente, 7500 AE Enschede, The Netherlands
| | - Ali Miserez
- Biological
and Biomimetic Materials Laboratory, Center for Sustainable Materials
(SusMat), School of Materials Science and Engineering, Nanyang Technological University (NTU), 50 Nanyang Avenue, Singapore 639798, Singapore
- School
of Biological Sciences, Nanyang Technological
University (NTU), 60
Nanyang Drive, Singapore 637551, Singapore
| |
Collapse
|
14
|
Kong GD, Byeon SE, Jang J, Kim JW, Yoon HJ. Electronic Mechanism of In Situ Inversion of Rectification Polarity in Supramolecular Engineered Monolayer. J Am Chem Soc 2022; 144:7966-7971. [PMID: 35500106 DOI: 10.1021/jacs.2c02391] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
This Communication describes polarity inversion in molecular rectification and the related mechanism. Using a supramolecular engineered, ultrastable, binary-mixed self-assembled monolayer (SAM) composed of an organic molecular diode (SC11BIPY) and an inert reinforcement molecule (SC8), we probed a rectification ratio (r)-voltage relationship over an unprecedentedly wide voltage range (up to |3.5 V|) with statistical significance. We observed positive polarity in rectification at |1.0 V| (r = 107), followed by disappearance of rectification at ∼|2.25 V|, and then eventual emergence of new rectification with the opposite polarity at ∼|3.5 V| (r = 0.006; 1/r = 162). The polarity inversion occurred with a span over 4 orders of magnitude in r. Low-temperature experiments, electronic structure analysis, and theoretical calculations revealed that the unusually wide voltage range permits access to molecular orbital energy levels that are inaccessible in the traditional narrow voltage regime, inducing the unprecedented in situ inversion of polarity.
Collapse
Affiliation(s)
- Gyu Don Kong
- Department of Chemistry, Korea University, Seoul 02841, Korea
| | - Seo Eun Byeon
- Department of Chemistry, Korea University, Seoul 02841, Korea
| | - Jiung Jang
- Department of Chemistry, Korea University, Seoul 02841, Korea
| | - Jeong Won Kim
- Korea Research Institute of Standards and Science (KRISS), Daejeon 34113, Korea
| | - Hyo Jae Yoon
- Department of Chemistry, Korea University, Seoul 02841, Korea
| |
Collapse
|
15
|
Pieters PF, Lainé A, Li H, Lu YH, Singh Y, Wang LW, Liu Y, Xu T, Alivisatos AP, Salmeron M. Multiscale Characterization of the Influence of the Organic-Inorganic Interface on the Dielectric Breakdown of Nanocomposites. ACS NANO 2022; 16:6744-6754. [PMID: 35393857 DOI: 10.1021/acsnano.2c01558] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Nanoscale engineered materials such as nanocomposites can display or be designed to enhance their material properties through control of the internal interfaces. Here, we unveil the nanoscale origin and important characteristics of the enhanced dielectric breakdown capabilities of gold nanoparticle/polymer nanocomposites. Our multiscale approach spans from the study of a single chemically designed organic/inorganic interface to micrometer-thick films. At the nanoscale, we relate the improved breakdown strength to the interfacial charge retention capability by combining scanning probe measurements and density functional theory calculations. At the meso- and macroscales, our findings highlight the relevance of the nanoparticle concentration and distribution in determining and enhancing the dielectric properties, as well as identifying this as a crucial limiting factor for the achievable sample size.
Collapse
Affiliation(s)
- Priscilla F Pieters
- Department of Chemistry, University of California, Berkeley, California 94720, United States
| | - Antoine Lainé
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - He Li
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
- Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - Yi-Hsien Lu
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - Yashpal Singh
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - Lin-Wang Wang
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - Yi Liu
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
- Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - Ting Xu
- Department of Chemistry, University of California, Berkeley, California 94720, United States
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
- Department of Materials Science and Engineering, University of California, Berkeley, California 94720, United States
| | - A Paul Alivisatos
- Department of Chemistry, University of California, Berkeley, California 94720, United States
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
- Department of Materials Science and Engineering, University of California, Berkeley, California 94720, United States
- Kavli Energy NanoScience Institute, Berkeley, California 94720, United States
| | - Miquel Salmeron
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
- Department of Materials Science and Engineering, University of California, Berkeley, California 94720, United States
| |
Collapse
|
16
|
Javorskis T, Rakickas T, Jankūnaitė A, Talaikis M, Niaura G, Ulčinas A, Orentas E. Meso-scale surface patterning of self-assembled monolayers with water. Colloids Surf A Physicochem Eng Asp 2021. [DOI: 10.1016/j.colsurfa.2021.127353] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
17
|
Gothe PK, Martinez A, Koh SJ. Effect of Ionic Strength, Nanoparticle Surface Charge Density, and Template Diameter on Self-Limiting Single-Particle Placement: A Numerical Study. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:11961-11977. [PMID: 34610743 DOI: 10.1021/acs.langmuir.1c01375] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
For the bottom-up approach where functional materials are constructed out of nanoscale building blocks (e.g., nanoparticles), it is essential to have methods that are capable of placing the individual nanoscale building blocks onto exact substrate positions on a large scale and on a large area. One of the promising placement methods is the self-limiting single-particle placement (SPP), in which a single nanoparticle in a colloidal solution is electrostatically guided by electrostatic templates and exactly one single nanoparticle is placed on each target position in a self-limiting way. This paper presents a numerical study on SPP, where the effects of three key parameters, (1) ionic strength (IS), (2) nanoparticle surface charge density (σNP), and (3) circular template diameter (d), on SPP are investigated. For 40 different parameter sets of (IS, σNP, d), a 30 nm nanoparticle positioned at R⃗ above the substrate was modeled in two configurations (i) without and (ii) with the presence of a 30 nm nanoparticle at the center of a circular template. For each parameter set and each configuration, the electrostatic potentials were calculated by numerically solving the Poisson-Boltzmann equation, from which interaction forces and interaction free energies were subsequently calculated. These have identified realms of parameter sets that enable a successful SPP. A few exemplary parameter sets include (IS, σNP, d) = (0.5 mM, -1.5 μC/cm2, 100 nm), (0.05 mM, -0.5 μC/cm2, 100 nm), (0.5 mM, -1.5 μC/cm2, 150 nm), and (0.05 mM, -0.8 μC/cm2, 150 nm). This study provides clear guidance toward experimental realizations of large-scale and large-area SPPs, which could lead to bottom-up fabrications of novel electronic, photonic, plasmonic, and spintronic devices and sensors.
Collapse
Affiliation(s)
- Pushkar K Gothe
- Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, Texas 76019, United States
| | - Anthony Martinez
- Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, Texas 76019, United States
| | - Seong Jin Koh
- Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, Texas 76019, United States
| |
Collapse
|
18
|
Roemer M, Keaveney ST, Proschogo N. Synthesis of Long-Chain Alkanoyl Benzenes by an Aluminum(III) Chloride-Catalyzed Destannylative Acylation Reaction. J Org Chem 2021; 86:9007-9022. [PMID: 34152767 DOI: 10.1021/acs.joc.1c00997] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
Abstract
This paper describes the facile synthesis of haloaryl compounds with long-chain alkanoyl substituents by the destannylative acylation of haloaryls bearing tri-n-butyltin (Bu3Sn) substituents. The method allows the synthesis of many important synthons for novel functional materials in a highly efficient manner. The halo-tri-n-butyltin benzenes are obtained by the lithium-halogen exchange of commercially available bis-haloarenes and the subsequent reaction with Bu3SnCl. Under typical Friedel-Crafts conditions, i.e., the presence of an acid chloride and AlCl3, the haloaryls are acylated through destannylation. The reactions proceed fast (<5 min) at low temperatures and thus are compatible with aromatic halogen substituents. Furthermore, the method is applicable to para-, meta-, and ortho-substitution and larger systems, as demonstrated for biphenyls. The generated tin byproducts were efficiently removed by trapping with silica/KF filtration, and most long-chain haloaryls were obtained chromatography-free. Molecular structures of several products were determined by X-ray single-crystal diffraction, and the crystal packing was investigated by mapping Hirshfeld surfaces onto individual molecules. A feasible reaction mechanism for the destannylative acylation reaction is proposed and supported through density functional theory (DFT) calculations. DFT results in combination with NMR-scale control experiments unambiguously demonstrate the importance of the tin substituent as a leaving group, which enables the acylation.
Collapse
Affiliation(s)
- Max Roemer
- School of Chemistry, The University of Sydney, Sydney, NSW 2006, Australia
| | - Sinead T Keaveney
- Department of Molecular Sciences, Macquarie University, Sydney, NSW 2109, Australia
| | - Nicholas Proschogo
- School of Chemistry, The University of Sydney, Sydney, NSW 2006, Australia
| |
Collapse
|