Durable Flexible Polymer-Encapsulated Cs4PbI6 Thin Film for High Sensitivity X-ray Detection

Double-Sided Bonding Process Enables X-ray Flat Panel Detectors

Metal halide perovskites have demonstrated superior sensitivity, lower detection limits, stability, and exceptional photoelectric properties in comparison to existing commercially available X-ray detector materials, showing their potential for shaping the next generation of X-ray detectors. Nevertheless, significant challenges persist in the seamless integration of these materials into pixelated array sensors for large-area X-ray direct detection imaging. In this article, we propose a strategy for fabricating large-scale array devices using a double-sided bonding process. The approach involves depositing a wet film on the surface of a thin-film transistor substrate to establish a robust bond between the substrate and δ-CsPbI3 wafer via van der Waals force, thereby facilitating area-array imaging. Additionally, the freestanding polycrystalline δ-CsPbI3 wafer demonstrated a competitive ultralow detection limit of 3.46 nGyair s-1 under 50 kVP X-ray irradiation, and the δ-CsPbI3 wafer still maintains a stable signal output (signal current drift is 3.5 × 10-5 pA cm-1 s-1 V-1) under the accumulated radiation dose of 234.9 mGyair. This strategy provides a novel perspective for the industrial production of large-area X-ray flat panel detectors utilizing perovskites and their derivatives.

Halide Perovskites and Their Derivatives for Efficient, High-Resolution Direct Radiation Detection: Design Strategies and Applications

The past decade has witnessed a rapid rise in the performance of optoelectronic devices based on lead-halide perovskites (LHPs). The large mobility-lifetime products and defect tolerance of these materials, essential for optoelectronics, also make them well-suited for radiation detectors, especially given the heavy elements present, which is essential for strong X-ray and γ-ray attenuation. Over the past decade, LHP thick films, wafers, and single crystals have given rise to direct radiation detectors that have outperformed incumbent technologies in terms of sensitivity (reported values up to 3.5 × 106 µC Gyair -1 cm-2 ), limit of detection (directly measured values down to 1.5 nGyair s-1 ), along with competitive energy and imaging resolution at room temperature. At the same time, lead-free perovskite-inspired materials (e.g., methylammonium bismuth iodide), which have underperformed in solar cells, have recently matched and, in some areas (e.g., in polarization stability), surpassed the performance of LHP detectors. These advances open up opportunities to achieve devices for safer medical imaging, as well as more effective non-invasive analysis for security, nuclear safety, or product inspection applications. Herein, the principles behind the rapid rises in performance of LHP and perovskite-inspired material detectors, and how their properties and performance link with critical applications in non-invasive diagnostics are discussed. The key strategies to engineer the performance of these materials, and the important challenges to overcome to commercialize these new technologies are also discussed.

Hydrogen Bonds Strengthened Metal-Free Perovskite for Degradable X-ray Detector with Enhanced Stability, Flexibility and Sensitivity

Metal-free perovskites (MFPs) with flexible and degradable properties have been adopted in flexible X-ray detection. For now, figuring out the key factors between structure and device performance are critical to guide the design of MFPs. Herein, MPAZE-NH₄ I₃  ⋅ H₂ O was first designed and synthesized with improved structural stability and device performance. Through theoretical calculations, the introducing methyl group benefits modulating tolerance factor, increases dipole moment and strengthens hydrogen bonds. Meanwhile, H₂ O increases the hydrogen bond formation sites and synergistically realizes the band nature modulation, ionic migration inhibition and structural stiffness optimization. Spectra analysis also proves that the improved electron-phonon coupling and carrier recombination lifetime contribute to enhanced performance. Finally, a flexible and degradable X-ray detector was fabricated with the highest sensitivity of 740.8 μC Gy_air ^-1  cm^-2 and low detection limit (0.14 nGy_air  s^-1 ).

Recent Development of Halide Perovskite Materials and Devices for Ionizing Radiation Detection

Ionizing radiation such as X-rays and γ-rays has been extensively studied and used in various fields such as medical imaging, radiographic nondestructive testing, nuclear defense, homeland security, and scientific research. Therefore, the detection of such high-energy radiation with high-sensitivity and low-cost-based materials and devices is highly important and desirable. Halide perovskites have emerged as promising candidates for radiation detection due to the large light absorption coefficient, large resistivity, low leakage current, high mobility, and simplicity in synthesis and processing as compared with commercial silicon (Si) and amorphous selenium (a-Se). In this review, we provide an extensive overview of current progress in terms of materials development and corresponding device architectures for radiation detection. We discuss the properties of a plethora of reported compounds involving organic-inorganic hybrid, all-inorganic, all-organic perovskite and antiperovskite structures, as well as the continuous breakthroughs in device architectures, performance, and environmental stability. We focus on the critical advancements of the field in the past few years and we provide valuable insight for the development of next-generation materials and devices for radiation detection and imaging applications.

Perovskite-like Silver Halide Single-Crystal Microbelt Enables Ultrasensitive Flexible X-ray Detectors

Lead halide perovskite single crystals have attracted wide interest in the field of X-ray detection due to their excellent photophysical properties. However, their inherent toxicity and high thickness restrict their applications in flexible devices. In this paper, designing a micronanometer-scale X-ray detector based on all-inorganic lead-free CsAg2I3 (CAI) single crystal microbelts (MBs) has addressed the above issues. These CAI single crystal MBs can be synthesized on various substrates with high crystal quality and excellent stability. Based on their excellent characteristics of the CAI MBs, we fabricate single CAI MB devices with an Au/CAI/Au structure, which shows not only good ultraviolet photoresponse characteristics, but also excellent X-ray detection performance. The optimized CAI photodetectors exhibit a responsivity of 23.59 mA/W, a high detectivity of 1010 Jones, and a fast response speed. For X-ray detection performance, a sensitivity of up to 515.49 μC Gyair-1 cm-2 and a detection limit of as low as 14.65 μGyair s-1 are achieved with outstanding operation stability and excellent long-term stability. Furthermore, our devices also showed excellent applicability for X-ray imaging, which is promising for their use in X-ray detection and imaging. Finally, flexible X-ray detectors are fabricated by using thin CAI single-crystal MBs and demonstrate good flexibility under different bending radii and bending cycles. Our work shows the potential for developing highly sensitive flexible integrated micro/nano optoelectronic devices by using lead-free perovskite analogue single crystals.

Vertically Oriented Porous PET as Template to Integrated Metal Halide for High-Performance Large-Area and Ultra-Flexible X-Ray Detector

High-performance X-ray detectors have immense potential in medical and security inspections. However, the current X-ray detectors are limited in flexible, high-spatial-resolution large-scale detection, and integration for imaging. Here, nuclear track-etched porous polyethylene terephthalate (PET) is developed as the template for preparing uniform, large-area (≥10⁵ cm² ), and flexible metal halide (MH)-based X-ray detectors. Adjustable high-density vertically oriented porous PET with adjustable thickness can provide proper physical support for flexible thick absorption film, thus improving X-ray absorption ability with excellent bending stability. Moreover, vertical channels can block the ion migration, lateral charge diffusion, and water/oxygen attacks, increasing activation energy for ionic transport, charge collection rate of electrodes, and environmental stability. Hence, the related detectors eventually obtain large sensitivity (6722 µC Gy_air ^-1 cm^-2 ), low detection limit (1.87 nGy_air s^-1 ), and high spatial resolution (5.17 lp mm^-1 ) compared to the detectors without porous PET template. Meanwhile, the device shows no degradation after storage or working under various thermal attacks. MH-filled-PET is also monolithically integrated on the bottom circuit with different MHs and it is applied to single-pixel mode and fast linear-array imaging in a broad range of X-rays photon energy (20 to 160 keV).

Halide Perovskite: A Promising Candidate for Next-Generation X-Ray Detectors

In the past decade, metal halide perovskite (HP) has become a superstar semiconductor material due to its great application potential in the photovoltaic and photoelectric fields. In fact, HP initially attracted worldwide attention because of its excellent photovoltaic efficiency. However, HP and its derivatives also show great promise in X-ray detection due to their strong X-ray absorption, high bulk resistivity, suitable optical bandgap, and compatibility with integrated circuits. In this review, the basic working principles and modes of both the direct-type and the indirect-type X-ray detectors are first summarized before discussing the applicability of HP for these two types of detection based on the pros and cons of different perovskites. Furthermore, the authors expand their view to different preparation methods developed for HP including single crystals and polycrystalline materials. Upon systematically analyzing their potential for X-ray detection and photoelectronic characteristics on the basis of different structures and dimensions (0D, 2D, and 3D), recent progress of HPs (mainly polycrystalline) applied to flexible X-ray detection are reviewed, and their practicability and feasibility are discussed. Finally, by reviewing the current research on HP-based X-ray detection, the challenges in this field are identified, and the main directions and prospects of future research are suggested.

Metal-Free PAZE-NH4 X3 ⋅H2 O Perovskite for Flexible Transparent X-ray Detection and Imaging

Metal-free perovskites are of interest for their chemical diversity and eco-friendly properties, and recently have been used for X-ray detection with superior carrier behavior. However, the size and shape complexity of the organic components results in difficulties in evaluating their stability in high-energy radiation. Herein, we introduce multiple hydrogen-bond metal-free PAZE-NH₄ X₃ ⋅H₂ O perovskite, where H₂ O leads to more hydrogen bonds appearing between organic molecules and the perovskite host. As suggested by the theoretical calculations, multiple hydrogen bonds promote stiffness of the lattice, and increase the diffusion barrier to inhibit ionic migration. Then, low trap density, high μτ products and structural flexibility of PAZE-NH₄ Br₃ ⋅H₂ O give a flexible X-ray detector with the highest sensitivity of 3708 μC Gy_air ^-1  cm^-2 , ultra-low detection limit of 0.19 μGy_air ^-1  s^-1 and superior spatial resolution of 5.0 lp mm^-1 .