Fully Crystalline Faceted Fe-Au Core-Shell Nanoparticles

Structural evolution under physical and chemical stimuli of metastable Au-Fe nanoalloys obtained by laser ablation in liquid

Metastable alloy nanoparticles are investigated for their variety of appealing properties exploitable for photonics, magnetism, catalysis and nanobiotechnology. Notably, nanophases out of thermodynamic equilibrium feature a complex "ultrastructure" leading to a dynamic evolution of composition and atomic arrangement in response to physical-chemical stimuli. In this manuscript, metastable Au-Fe alloy nanoparticles were produced by laser ablation in liquid, an emerging versatile synthetic approach for freezing multielement nanosystems in non-equilibrium conditions. The Au-Fe nanoalloys were characterized through electron microscopy, elemental analysis, X-ray diffraction and Mössbauer spectroscopy. The dynamics of the structure of the Au-Fe system was tracked at high temperature under vacuum and atmospheric conditions, evidencing the intrinsic transformative nature of the metastable nanoalloy produced by laser ablation in liquid. This dynamic structure is relevant to possible application in several fields, from photocatalysis to nanomedicine, as demonstrated through an experiment of magnetic resonance imaging in biological fluids.

Measuring transferability issues in machine-learning force fields: the example of gold–iron interactions with linearized potentials

Machine-learning force fields have been increasingly employed in order to extend the possibility of current first-principles calculations. However, the transferability of the obtained potential cannot always be guaranteed in situations that are outside the original database. To study such limitation, we examined the very difficult case of the interactions in gold–iron nanoparticles. For the machine-learning potential, we employed a linearized formulation that is parameterized using a penalizing regression scheme which allows us to control the complexity of the obtained potential. We showed that while having a more complex potential allows for a better agreement with the training database, it can also lead to overfitting issues and a lower accuracy in untrained systems.

Synthesis of Core-Shell Micro/Nanoparticles and Their Tribological Application: A Review

Owing to the diverse composition, adjustable performance, and synergistic effect among components, core–shell micro/nanoparticles have been widely applied in the field of tribology in recent years. The strong combination with the matrix and the good dispersion of reinforcing fillers in the composites could be achieved through the design of core–shell structural particles based on the reinforcing fillers. In addition, the performance of chemical mechanical polishing could be improved by optimizing the shell material coated on the abrasive surface. The physical and chemical state of the core–shell micro/nanoparticles played important effects on the friction and wear properties of materials. In this paper, the synthesis methods, the tribological applications (acted as solid/liquid lubricant additive, chemical mechanical polishing abrasives and basic units of lubricant matrix), and the functionary mechanisms of core–shell micro/nanoparticles were systematically reviewed, and the future development of core–shell micro/nanoparticles in tribology was also prospected.

How interface properties control the equilibrium shape of core-shell Fe-Au and Fe-Ag nanoparticles

While combining two metals in the same nanoparticle can lead to remarkable novel applications, the resulting structure in terms of crystallinity and shape remains difficult to predict. It is thus essential to provide a detailed atomistic picture of the underlying growth processes. In the present work we address the case of core-shell Fe-Au and Fe-Ag nanoparticles. Interface properties between Fe and the noble metals Au and Ag, computed using DFT, were used to parameterize Fe-Au and Fe-Ag pairwise interactions in combination with available many-body potentials for the pure elements. The growth of Au or Ag shells on nanometric Fe cores with prescribed shapes was then modelled by means of Monte Carlo simulations. The shape of the obtained Fe-Au nanoparticles is found to strongly evolve with the amount of metal deposited on the Fe core, a transition from the polyhedral Wulff shape of bare iron to a cubic shape taking place as the amount of deposited gold exceeds two monolayers. In striking contrast, the growth of silver proceeds in a much more anisotropic, Janus-like way and with a lesser dependence on the iron core shape. In both cases, the predicted morphologies are found to be in good agreement with experimental observations in which the nanoparticles are grown by physical deposition methods. Understanding the origin of these differences, which can be traced back to subtle variations in the electronic structure of the Au/Fe and Ag/Fe interfaces, should further contribute to the better design of core-shell bimetallic nanoparticles.

Advances in the Application of Magnetic Nanoparticles for Sensing

Magnetic nanoparticles (MNPs) are of high significance in sensing as they provide viable solutions to the enduring challenges related to lower detection limits and nonspecific effects. The rapid expansion in the applications of MNPs creates a need to overview the current state of the field of MNPs for sensing applications. In this review, the trends and concepts in the literature are critically appraised in terms of the opportunities and limitations of MNPs used for the most advanced sensing applications. The latest progress in MNP sensor technologies is overviewed with a focus on MNP structures and properties, as well as the strategies of incorporating these MNPs into devices. By looking at recent synthetic advancements, and the key challenges that face nanoparticle-based sensors, this review aims to outline how to design, synthesize, and use MNPs to make the most effective and sensitive sensors.

Alloy, Janus and core-shell nanoparticles: numerical modeling of their nucleation and growth in physical synthesis

While alloy, core-shell and Janus binary nanoclusters are found in more and more technological applications, their formation mechanisms are still poorly understood, especially during synthesis methods involving physical approaches. In this work, we employ a very simple model of such complex systems using Lennard-Jones interactions and inert gas quenching. After demonstrating the ability of the model to well reproduce the formation of alloy, core-shell or Janus nanoparticles, we studied their temporal evolution from the gas via droplets to nanocrystalline particles. In particular, we showed that the growth mechanisms exhibit qualitative differences between these three chemical orderings. Then, we determined how the quenching rate can be used to finely tune structural characteristics of the final nanoparticles, including size, shape and crystallinity.

Morphology of Composite Fe@Au Submicron Particles, Produced with Ultrasonic Spray Pyrolysis and Potential for Synthesis of Fe@Au Core-Shell Particles

Iron core–gold shell (Fe@Au) nanoparticles are prominent for their magnetic and optical properties, which are especially beneficial for biomedical uses. Some experiments were carried out to produce Fe@Au particles with a one-step synthesis method, Ultrasonic Spray Pyrolysis (USP), which is able to produce the particles in a continuous process. The Fe@Au particles were produced with USP from a precursor solution with dissolved Iron (III) chloride and Gold (III) chloride, with Fe/Au concentration ratios ranging from 0.1 to 4. The resulting products are larger Fe oxide particles (mostly maghemite Fe₂O₃), with mean sizes of about 260–390 nm, decorated with Au nanoparticles (AuNPs) with mean sizes of around 24–67 nm. The Fe oxide core particles are mostly spherical in all of the experiments, while the AuNPs become increasingly irregular and more heavily agglomerated with lower Fe/Au concentration ratios in the precursor solution. The resulting particle morphology from these experiments is caused by surface chemistry and particle to solvent interactions during particle formation inside the USP system.

Ultrathin lead bromide perovskite platelets spotted with europium(ii) bromide dots

We describe here the preparation of a novel nanohybrid comprising a two-layer cesium lead bromide nanoplatelet, [CsPbBr3]PbBr4 NPL, containing europium(ii) bromide (EuBr2) nanodots, by ultrasound/heating treatment of toluene dispersions of the CsPbBr3 nanomaterial in the presence of EuBr2 nanodots. The hybrid nanoplatelets exhibit strong excitonic and narrow emission peaks characteristic of ultrathin NPLs at 430 and 436 nm, respectively.

Site-Specific Wetting of Iron Nanocubes by Gold Atoms in Gas-Phase Synthesis

A key challenge in nanotechnology is the rational design of multicomponent materials that beat the properties of their elemental counterparts. At the same time, when considering the material composition of such hybrid nanostructures and the fabrication process to obtain them, one should favor the use of nontoxic, abundant elements in view of the limited availability of critical metals and sustainability. Cluster beam deposition offers a solvent- and, therefore, effluent-free physical synthesis method to achieve nanomaterials with tailored characteristics. However, the simultaneous control of size, shape, and elemental distribution within a single nanoparticle in a small-size regime (sub-10 nm) is still a major challenge, equally limiting physical and chemical approaches. Here, a single-step nanoparticle fabrication method based on magnetron-sputtering inert-gas condensation is reported, which relies on selective wetting of specific surface sites on precondensed iron nanocubes by gold atoms. Using a newly developed Fe-Au interatomic potential, the growth mechanism is decomposed into a multistage model implemented in a molecular dynamics simulation framework. The importance of growth kinetics is emphasized through differences between structures obtained either experimentally or computationally, and thermodynamically favorable configurations determined via global optimization techniques. These results provide a roadmap for engineering complex nanoalloys toward targeted applications.

Surface faceting and compositional evolution of Pd@Au core–shell nanocrystals during in situ annealing

A step-wise transformation process of a Pd@Au nanoparticle both structurally and compositionally was observed. Monte Carlo simulation was used to explain the results.

Higher Temperatures Yield Smaller Grains in a Thermally Stable Phase-Transforming Nanocrystalline Alloy

Grains in crystalline materials usually grow with increased thermal exposure. Classical phenomena such as recrystallization may lead to a purely temporary decrease in the grain size, while recent advances in alloy design can yield thermally stable nanocrystalline materials in which grain growth stagnates. But grains never shrink, since there is a lack of interface-generating mechanisms at high temperatures, which are required to decrease the grain size if such was the system's thermodynamic tendency. Here we sidestep this paradigm by designing a nanocrystalline alloy having an allotropic phase transformation-an interface-generating mechanism-such that only the high-temperature phase is stabilized against grain growth. We demonstrate that for an Fe-Au alloy cycled through the α↔γ transformation, the high-temperature phase (γ-Fe) has a stable fine grain size, smaller than its low-temperature counterpart (α-Fe). The result is an unusual material in which an increase in temperature leads to finer grains that are stable in size.

How the crystal structure and phase segregation of Au-Fe alloy nanoparticles are ruled by the molar fraction and size

The application of an Au-Fe nanoalloy is determined by its internal phase structure. Our experimental and theoretical findings explain how the prevalence of either a core-shell or a disordered solid solution structure is ruled by the target composition and the particle diameter. Furthermore, we found metastable phases not predefined by the bulk phase diagram.

Au–Fe nanoparticles visited by MD simulation: structural and thermodynamic properties affected by chemical composition

In this work, Fe–Au nanoalloys and Fe@Au core–shell nanoclusters are investigated via classical molecular dynamics simulation to determine the effect of their composition on their thermodynamic stability and melting mechanism.

Direct cation exchange of surface ligand capped upconversion nanocrystals to produce strong luminescence

We develop a facile and rapid cation exchange method for upconversion nanocrystals (UCNCs) without removing surface ligands.

Tracking the restructuring of oxidized silver-indium nanoparticles under a reducing atmosphere by environmental HRTEM

Multimetallic nano-alloys display a structure and consequently physicochemical properties evolving in a reactive environment. Following and understanding this evolution is therefore crucial for future applications in gas sensing and heterogeneous catalysis. In view hereof, the structural evolution of oxidized Ag₂₅In₇₅ bimetallic nanoparticles under varying H₂ partial pressures (P_H2) and substrate temperatures (T_s) has been investigated in real-time through environmental transmission microscopy (E-TEM) while maintaining the atomic resolution. Small Ag₂₅In₇₅ bimetallic nanoparticles, produced by laser vaporization, are found (after air transfer) to contain an indium-oxide shell surrounding a silver-rich alloyed phase. For high P_H2 and T_s, the direct reduction of the indium oxide shell, immediately followed by the melting or the diffusion onto the carbon substrate of the reduced indium atoms, is found to be the dominant mechanism. This reduction is concomitant with the growth of the core, indicating a partial diffusion of indium atoms from the shell towards the particle volume. The "surviving" particles therefore consist of a silver-indium alloy, very stable and remarkably resistant against oxidation contrary to native clusters. Interestingly, in the (P_H2, T_s) space, the transition from "soft" (core-shell particles for low (P_H2, T_s) values) to "strong" reduction conditions (silver-rich alloys for high (P_H2, T_s) products) defines an intermediate domain where the preferred formation of Janus structures is detected. These results are discussed in terms of thermodynamic driving forces in relation to alloying and interface energies. This work shows the potential of high-resolution ETEM for unravelling the mechanisms of nanoparticle reorganization in a chemically reactive environment.

Fe3O4@Au@mSiO2 as an enhancing nanoplatform for Rose Bengal photodynamic activity

A novel nanoplatform composed of three types of materials with different functionalities, specifically core-shell Fe₃O₄@Au nanoparticles encapsulated near the outer surface of mesoporous silica (mSiO₂) nanoparticles, has been successfully synthesised and used to enhance the efficiency of a photosensitiser, namely Rose Bengal, in singlet oxygen generation. Fe₃O₄ is responsible for the unusual location of the Fe₃O₄@Au nanoparticle, while the plasmonic shell acts as an optical antenna. In addition, the mesoporous silica matrix firmly encapsulates Rose Bengal by chemical bonding inside the pores, thus guaranteeing its photostability, and in turn making the nanosystem biocompatible. Moreover, the silica surface of the nanoplatform ensures further functionalisation on demand.

Laser Desorption Ionization Quadrupole Ion Trap Time-of-Flight Mass Spectrometry of Au m Fe n+/- Clusters Generated from Gold-Iron Nanoparticles and their Giant Nanoflowers. Electrochemical and/or Plasma Assisted Synthesis

Gold nanoparticles (NP) with average diameter ~100 nm synthesized from tetrachloroauric acid solution using stainless steel as a reducing agent were found to contain iron. Applying simultaneously high frequency (HF) plasma discharge in solution during the electrochemical reduction, giant gold-iron nanoflowers with average size ~1000-5000 nm were formed. Scanning electron microscopy (SEM) shows the morphology of the nanopowders produced as polygonal yet nearly spherical, whereas iron content in both products determined by energy dispersive X-ray analysis (EDX) was found to be at ~2.5 at. %. Laser desorption ionization (LDI) of both nanomaterials and mass spectrometric analysis show the formation of Au _m Fe _n^+/- (m = 1-35; n = 1-3) clusters. Structure of few selected clusters in neutral or monocharged forms were computed by density functional theory (DFT) calculations and it was found that typical distances of an iron nucleus from adjacent gold nuclei lie in the interval 2.5 to 2.7 Å. Synthetized Au-Fe nanoparticles were found stable for at least 2 mo at room temperature (even in aqueous solution) without any stabilizing agent. Produced Au-Fe nanoparticles in combination with standard MALDI matrices enhance ionization of peptides and might find use in nanomedicine. Graphical Abstract ᅟ.

Smallest Bimetallic CoPt3 Superparamagnetic Nanoparticles

We present for the first time a nonaqueous sol-gel route to produce ultrasmall (<2 nm) magnetic bimetallic CoPt₃ nanoparticles (NPs). The one-pot procedure is carried out at low temperature (180 °C) using benzyl alcohol, acting as both reducing agent and solvent. The highly monodisperse CoPt₃ NPs were investigated with innovative advanced X-ray methods (whole powder pattern modeling), HR-STEM, XPS, and SQUID magnetometry. XPS showed Co was mostly in metallic form, but with a very small amount of CoO on the NP surface. The spherical NPs had an ultrasmall diameter of 1.6 nm and could self-assemble in aligned linear chains, or nanobelts, of single NPs. They are superparamagnetic, with blocking temperature of ∼20 K and coercivity at 10 K of 27.9 kA m^-1 (∼350 Oe). However, there is evidence of a second magnetic phase (probably CoO) in the ZFC magnetization curve, which enhances their magnetization values, without significantly affecting their superparamagnetism.

Tuning Surface Properties of Low Dimensional Materials via Strain Engineering

The promising and versatile applications of low dimensional materials are largely due to their surface properties, which along with their underlying electronic structures have been well studied. However, these materials may not be directly useful for applications requiring properties other than their natal ones. In recent years, strain has been shown to be an additionally useful handle to tune the physical and chemical properties of materials by changing their geometric and electronic structures. The strategies for producing strain are summarized. Then, the electronic structure of quasi-two dimensional layered non-metallic materials (e.g., graphene, MX2, BP, Ge nanosheets) under strain are discussed. Later, the strain effects on catalytic properties of metal-catalyst loaded with strain are focused on. Both experimental and computational perspectives for dealing with strained systems are covered. Finally, an outlook on engineering surface properties utilizing strain is provided.

Preparation of core-shell Ag@CeO2 nanocomposite by LSPR photothermal induced interface reaction

The core-shell structure of Ag@CeO2 was prepared by a novel and facile method, which was based on the photothermal effect of localized surface plasmon resonance (LSPR). Nanoparticles (NPs) of Ag were dispersed in a solution containing citric acid, ethylene glycol and cerium nitrate, then under irradiation, Ag NPs generated heat from LSPR and the heat-induced polymerization reaction in the interface between Ag and the sol resulted in cerium gel formation only on the surface of the Ag NPs. After calcination, Ag@CeO2 was successfully obtained, then Ag@CeO2/SiO2 was prepared by loading Ag@CeO2 on SiO2. The resultant catalyst exhibited favorable activity and stability for CO oxidation. The preparation method proposed here should be extendable to other composites with metallic cores and oxide shells in which the metallic nanoparticle possesses LSPR properties.

Solvent-surface interactions control the phase structure in laser-generated iron-gold core-shell nanoparticles

This work highlights a strategy for the one-step synthesis of FeAu nanoparticles by the pulsed laser ablation of alloy targets in the presence of different solvents. This method allows particle generation without the use of additional chemicals; hence, solvent-metal interactions could be studied without cross effects from organic surface ligands. A detailed analysis of generated particles via transmission electron microscopy in combination with EDX elemental mapping could conclusively verify that the nature of the used solvent governs the internal phase structure of the formed nanoparticles. In the presence of acetone or methyl methacrylate, a gold shell covering a non-oxidized iron core was formed, whereas in aqueous media, an Au core with an Fe₃O₄ shell was generated. This core-shell morphology was the predominant species found in >90% of the examined nanoparticles. These findings indicate that fundamental chemical interactions between the nanoparticle surface and the solvent significantly contribute to phase segregation and elemental distribution in FeAu nanoparticles. A consecutive analysis of resulting Fe@Au core-shell nanoparticles revealed outstanding oxidation resistance and fair magnetic and optical properties. In particular, the combination of these features with high stability magnetism and plasmonics may create new opportunities for this hybrid material in imaging applications.

Adsorption energy of small molecules on core–shell Fe@Au nanoparticles: tuning by shell thickness

The adsorption of several small molecules on different gold surfaces, Au(001), strained Au(001) and Au(001) epitaxied on Fe(001), has been characterized using density functional theory.