A Protein Rotaxane Controls the Translocation of Proteins Across a ClyA Nanopore

Enzyme-less nanopore detection of post-translational modifications within long polypeptides

Means to analyse cellular proteins and their millions of variants at the single-molecule level would uncover substantial information previously unknown to biology. Nanopore technology, which underpins long-read DNA and RNA sequencing, holds potential for full-length proteoform identification. We use electro-osmosis in an engineered charge-selective nanopore for the non-enzymatic capture, unfolding and translocation of individual polypeptides of more than 1,200 residues. Unlabelled thioredoxin polyproteins undergo transport through the nanopore, with directional co-translocational unfolding occurring unit by unit from either the C or N terminus. Chaotropic reagents at non-denaturing concentrations accelerate the analysis. By monitoring the ionic current flowing through the nanopore, we locate post-translational modifications deep within the polypeptide chains, laying the groundwork for compiling inventories of the proteoforms in cells and tissues.

Translocation of linearized full-length proteins through an engineered nanopore under opposing electrophoretic force

Nanopores have recently been used to identify and fingerprint proteins. However, because proteins, unlike DNA, do not have a uniform charge, the electrophoretic force cannot in general be used to translocate or linearize them. Here we show that the introduction of sets of charges in the lumen of the CytK nanopore spaced by ~1 nm creates an electroosmotic flow that induces the unidirectional transport of unstructured natural polypeptides against a strong electrophoretic force. Molecular dynamics simulations indicate that this electroosmotic-dominated force has a strength of ~20 pN at -100 mV, which is similar to the electric force on single-stranded DNA. Unfolded polypeptides produce current signatures as they traverse the nanopore, which may be used to identify proteins. This approach can be used to translocate and stretch proteins for enzymatic and non-enzymatic protein identification and sequencing.

Single-molecule fingerprinting of protein-drug interaction using a funneled biological nanopore

In drug discovery, efficient screening of protein-drug interactions (PDIs) is hampered by the limitations of current biophysical approaches. Here, we develop a biological nanopore sensor for single-molecule detection of proteins and PDIs using the pore-forming toxin YaxAB. Using this YaxAB nanopore, we demonstrate label-free, single-molecule detection of interactions between the anticancer Bcl-xL protein and small-molecule drugs as well as the Bak-BH3 peptide. The long funnel-shaped structure and nanofluidic characteristics of the YaxAB nanopore enable the electro-osmotic trapping of diverse folded proteins and high-resolution monitoring of PDIs. Distinctive nanopore event distributions observed in the two-dimensional (ΔI/I_o-versus-I_N) plot illustrate the ability of the YaxAB nanopore to discriminate individual small-molecule drugs bound to Bcl-xL from non-binders. Taken together, our results present the YaxAB nanopore as a robust platform for label-free, ultrasensitive, single-molecule detection of PDIs, opening up a possibility for low-cost, highly efficient drug discovery against diverse drug targets.

Nanopore sensors for single molecular protein detection: Research progress based on computer simulations

As biological macromolecules, proteins are involved in important cellular functions ranging from DNA replication and biosynthesis to metabolic signalling and environmental sensing. Protein sequencing can help understand the relationship between protein function and structure, and provide key information for disease diagnosis and new drug design. Nanopore sensors are a novel technology to achieve the goal of label-free and high-throughput protein sequencing. In recent years, nanopore-based biosensors have been widely used in the detection and analysis of biomolecules such as DNA, RNA, and proteins. At the same time, computer simulations can describe the transport of proteins through nanopores at the atomic level. This paper reviews the applications of nanopore sensors in protein sequencing over the past decade and the solutions to key problems from a computer simulation perspective, with the aim of pointing the way to the future of nanopore protein sequencing.

PlyAB Nanopores Detect Single Amino Acid Differences in Folded Haemoglobin from Blood

The real‐time identification of protein biomarkers is crucial for the development of point‐of‐care and portable devices. Here, we use a PlyAB biological nanopore to detect haemoglobin (Hb) variants. Adult haemoglobin (HbA) and sickle cell anaemia haemoglobin (HbS), which differ by just one amino acid, were distinguished in a mixture with more than 97 % accuracy based on individual blockades. Foetal Hb, which shows a larger sequence variation, was distinguished with near 100 % accuracy. Continuum and Brownian dynamics simulations revealed that Hb occupies two energy minima, one near the inner constriction and one at the trans entry of the nanopore. Thermal fluctuations, the charge of the protein, and the external bias influence the dynamics of Hb within the nanopore, which in turn generates the unique ionic current signal in the Hb variants. Finally, Hb was counted from blood samples, demonstrating that direct discrimination and quantification of Hb from blood using nanopores, is feasible.

β-Barrel Nanopores with an Acidic-Aromatic Sensing Region Identify Proteinogenic Peptides at Low pH

Biological nanopores are emerging as sensitive single-molecule sensors for proteins and peptides. The heterogeneous charge of a polypeptide chain, however, can complicate or prevent the capture and translocation of peptides and unfolded proteins across nanopores. Here, we show that two β-barrel nanopores, aerolysin and cytotoxin K, cannot efficiently detect proteinogenic peptides from a trypsinated protein under a wide range of conditions. However, the introduction of an acidic-aromatic sensing region in the β-barrel dramatically increased the dwell time and the discrimination of peptides in the nanopore at acidic pH. Surprisingly, despite the fact that the two β-barrel nanopores have a similar diameter and an acidic-aromatic construction, their capture mechanisms differ. The electro-osmotic flow played a dominant role for aerolysin, while the electrophoretic force dominated for cytotoxin K. Nonetheless, both β-barrel nanopores allowed the detection of mixtures of trypsinated peptides, with aerolysin nanopores showing a better resolution for larger peptides and cytotoxin K showing a better resolution for shorter peptides. Therefore, this work provides a generic strategy for modifying nanopores for peptide detection that will be most likely be applicable to other nanopore-forming toxins.

Navigated Delivery of Peptide to the Nanopore Using In-Plane Heterostructures of MoS2 and SnS2 for Protein Sequencing

The impressive success of DNA sequencing using nanopores makes it possible to realize nanopore based protein sequencing. Well-controlled capture and linear movement of the protein are essential for accurate nanopore protein sequencing. Here, by taking advantage of different binding affinities of protein to two isomorphic materials, we theoretically designed a heterostructual platform for delivering the unfolded peptide to the nanopore sensing region. Due to the stronger binding between the peptide and SnS₂ compared to MoS₂, the peptide would adsorb to the SnS₂ nanostripe and keep its threadlike conformation in the MoS₂/SnS₂/MoS₂ heterostructure. Through switching the direction of the applied electric field in real time, the peptide was strategically driven to move along the designed path to the target nanopore. The ionic current blockades were also found to be different as the compositions of the peptide were changed, indicating the possibility for differentiating different peptides using this platform.

New Insights for Biosensing: Lessons from Microbial Defense Systems

Microorganisms have gained defense systems during the lengthy process of evolution over millions of years. Such defense systems can protect them from being attacked by invading species (e.g., CRISPR-Cas for establishing adaptive immune systems and nanopore-forming toxins as virulence factors) or enable them to adapt to different conditions (e.g., gas vesicles for achieving buoyancy control). These microorganism defense systems (MDS) have inspired the development of biosensors that have received much attention in a wide range of fields including life science research, food safety, and medical diagnosis. This Review comprehensively analyzes biosensing platforms originating from MDS for sensing and imaging biological analytes. We first describe a basic overview of MDS and MDS-inspired biosensing platforms (e.g., CRISPR-Cas systems, nanopore-forming proteins, and gas vesicles), followed by a critical discussion of their functions and properties. We then discuss several transduction mechanisms (optical, acoustic, magnetic, and electrical) involved in MDS-inspired biosensing. We further detail the applications of the MDS-inspired biosensors to detect a variety of analytes (nucleic acids, peptides, proteins, pathogens, cells, small molecules, and metal ions). In the end, we propose the key challenges and future perspectives in seeking new and improved MDS tools that can potentially lead to breakthrough discoveries in developing a new generation of biosensors with a combination of low cost; high sensitivity, accuracy, and precision; and fast detection. Overall, this Review gives a historical review of MDS, elucidates the principles of emulating MDS to develop biosensors, and analyzes the recent advancements, current challenges, and future trends in this field. It provides a unique critical analysis of emulating MDS to develop robust biosensors and discusses the design of such biosensors using elements found in MDS, showing that emulating MDS is a promising approach to conceptually advancing the design of biosensors.

Detection of small-sized DNA fragments in a glassy nanopore by utilization of CRISPR-Cas12a as a converter system

The fabrication of nanopores with a matched pore size, and the existence of multiple interferents make the reproducible detection of small-sized molecules by means of solid-state nanopores still challenging. A useful method to solve these problems is based on the detection of large DNA nanostructures related to the existence of small-sized targets. In particular, a DNA tetrahedron with a well-defined 3D nanostructure is the ideal candidate for use as a signal transducer. Here, we demonstrate the detection of an L1-encoding gene of HPV18 as a test DNA target sequence in a reaction buffer solution, where long single-stranded DNA linking DNA tetrahedra onto the surface of the magnetic beads is cleaved by a target DNA-activated CRISPR-cas12 system. The DNA tetrahedra are subsequently released and can be detected by the current pulse in a glassy nanopore. This approach has several advantages: (1) one signal transducer can be used to detect different targets; (2) a glassy nanopore with a pore size much larger than the target DNA fragment can boost the tolerance of the contaminants and interferents which often degrade the performance of a nanopore sensor.

Single-Molecule Sampling of Dihydrofolate Reductase Shows Kinetic Pauses and an Endosteric Effect Linked to Catalysis

The ability to sample multiple reactions on the same single enzyme is important to link rare intermediates with catalysis and to unravel the role of conformational changes. Despite decades of efforts, however, the single-molecule characterization of nonfluorogenic enzymes during multiple catalytic turnovers has been elusive. Here, we show that nanopore currents allow sampling the dynamic exchange between five structural intermediates during E. coli dihydrofolate reductase (DHFR) catalysis. We found that an endosteric effect promotes the binding of the substrate to the enzyme with a specific hierarchy. The chemical step then switched the enzyme from the closed to the occluded conformation, which in turn promotes the release of the reduced cofactor NADP⁺. Unexpectedly, only a few reactive complexes lead to catalysis. Furthermore, second-long catalytic pauses were observed, possibly reflecting an off-path conformation generated during the reaction. Finally, the free energy from multiple cofactor binding events were required to release the product and switch DHFR back to the reactive conformer. This catalytic fueled concerted mechanism is likely to have evolved to improve the catalytic efficiency of DHFR under the high concentrations of NADP⁺ in E. coli and might be a general feature for complex enzymatic reactions where the binding and release of the products must be tightly controlled.

Bottom-up fabrication of a proteasome-nanopore that unravels and processes single proteins

The precise assembly and engineering of molecular machines capable of handling biomolecules play crucial roles in most single-molecule methods. In this work we use components from all three domains of life to fabricate an integrated multiprotein complex that controls the unfolding and threading of individual proteins across a nanopore. This 900 kDa multicomponent device was made in two steps. First, we designed a stable and low-noise β-barrel nanopore sensor by linking the transmembrane region of bacterial protective antigen to a mammalian proteasome activator. An archaeal 20S proteasome was then built into the artificial nanopore to control the unfolding and linearized transport of proteins across the nanopore. This multicomponent molecular machine opens the door to two approaches in single-molecule protein analysis, in which selected substrate proteins are unfolded, fed to into the proteasomal chamber and then addressed either as fragmented peptides or intact polypeptides.

Nanopore Technology for the Application of Protein Detection

Protein is an important component of all the cells and tissues of the human body and is the material basis of life. Its content, sequence, and spatial structure have a great impact on proteomics and human biology. It can reflect the important information of normal or pathophysiological processes and promote the development of new diagnoses and treatment methods. However, the current techniques of proteomics for protein analysis are limited by chemical modifications, large sample sizes, or cumbersome operations. Solving this problem requires overcoming huge challenges. Nanopore single molecule detection technology overcomes this shortcoming. As a new sensing technology, it has the advantages of no labeling, high sensitivity, fast detection speed, real-time monitoring, and simple operation. It is widely used in gene sequencing, detection of peptides and proteins, markers and microorganisms, and other biomolecules and metal ions. Therefore, based on the advantages of novel nanopore single-molecule detection technology, its application to protein sequence detection and structure recognition has also been proposed and developed. In this paper, the application of nanopore single-molecule detection technology in protein detection in recent years is reviewed, and its development prospect is investigated.

Strategies for enzymological studies and measurements of biological molecules with the cytolysin A nanopore

Pore-forming toxins are used in a variety of biotechnological applications. Typically, individual membrane proteins are reconstituted in artificial lipid bilayers where they form water-filled nanoscale apertures (nanopores). When a voltage is applied, the ionic current passing through a nanopore can be used for example to sequence biopolymers, identify molecules, or to study chemical or enzymatic reactions at the single-molecule level. Here we present strategies for studying individual enzymes and measuring molecules, also in highly complex biological samples such as blood.

X-ray crystallography shines a light on pore-forming toxins

A common form of cellular attack by pathogenic bacteria is to secrete pore-forming toxins (PFTs). Capable of forming transmembrane pores in various biological membranes, PFTs have also been identified in a diverse range of other organisms such as sea anemones, earthworms and even mushrooms and trees. The mechanism of pore formation by PFTs is associated with substantial conformational changes in going from the water-soluble to transmembrane states of the protein. The determination of the crystal structures for numerous PFTs has shed much light on our understanding of these proteins. Other than elucidating the atomic structural details of PFTs and the conformational changes that must occur for pore formation, crystal structures have revealed structural homology that has led to the discovery of new PFTs and new PFT families. Here we review some key crystallographic results together with complimentary approaches for studying PFTs. We discuss how these studies have impacted our understanding of PFT function and guided research into biotechnical applications.

Autonomous and Active Transport Operated by an Entropic DNA Piston

We present a synthetic nanoscale piston that uses chemical energy to perform molecular transport against an applied bias. Such a device comprises a 13 by 5 nm protein cylinder, embedded in a biological membrane enclosing a single-stranded DNA (ssDNA) rod. Hybridization with DNA cargo rigidifies the rod, allowing for transport of a selected DNA molecule across the nanopore. A strand displacement reaction from ssDNA fuel on the other side of the membrane then liberates the DNA cargo back into solution and regenerates the initial configuration. The entropic penalty of ssDNA confinement inside the nanopore drives DNA transport regardless of the applied bias. Multiple automated and reciprocating cycles are observed, in which the DNA piston moves through the 10 nm length of the nanopore. In every cycle, a single DNA molecule is transported across the nanopore against an external bias force, which is the hallmark of biological transporters.

Biological Nanopores: Engineering on Demand

Nanopore-based sensing is a powerful technique for the detection of diverse organic and inorganic molecules, long-read sequencing of nucleic acids, and single-molecule analyses of enzymatic reactions. Selected from natural sources, protein-based nanopores enable rapid, label-free detection of analytes. Furthermore, these proteins are easy to produce, form pores with defined sizes, and can be easily manipulated with standard molecular biology techniques. The range of possible analytes can be extended by using externally added adapter molecules. Here, we provide an overview of current nanopore applications with a focus on engineering strategies and solutions.

Molecular dynamics discrimination of the conformational states of calmodulin through solid-state nanopores

As a type of biological macromolecule, the conformation of proteins dynamically changes in a solution, which often results in a change in their function. However, traditional biological assays have significant drawbacks in detecting the conformation properties of proteins. Alternatively, nanopores have potential advantages in this area, which can detect protein in high throughput and without labelling. Herein, we investigated the translocation of calmodulins through silicon nitride nanopores using molecular dynamics (MD) simulation. Initially, the calmodulins were fixed in the nanopore. Distinguished blocked ionic currents were obtained between the two forms of calmodulin. Next, in the translocation simulations, a prominent difference in time resolution was easily found between the two states of calmodulin by using the appropriate voltage and comparable size of pore to protein, r_p/r_g→ 1, 4.5 nm (where r_p is the protein radius and r_g is the gyration radius). These simulations on the nanoscale are helpful for developing Ca²⁺-sensitive ion channels and nanodevices.

Accurate modeling of a biological nanopore with an extended continuum framework

Despite the broad success of biological nanopores as powerful instruments for the analysis of proteins and nucleic acids at the single-molecule level, a fast simulation methodology to accurately model their nanofluidic properties is currently unavailable. This limits the rational engineering of nanopore traits and makes the unambiguous interpretation of experimental results challenging. Here, we present a continuum approach that can faithfully reproduce the experimentally measured ionic conductance of the biological nanopore Cytolysin A (ClyA) over a wide range of ionic strengths and bias potentials. Our model consists of the extended Poisson-Nernst-Planck and Navier-Stokes (ePNP-NS) equations and a computationally efficient 2D-axisymmetric representation for the geometry and charge distribution of the nanopore. Importantly, the ePNP-NS equations achieve this accuracy by self-consistently considering the finite size of the ions and the influence of both the ionic strength and the nanoscopic scale of the pore on the local properties of the electrolyte. These comprise the mobility and diffusivity of the ions, and the density, viscosity and relative permittivity of the solvent. Crucially, by applying our methodology to ClyA, a biological nanopore used for single-molecule enzymology studies, we could directly quantify several nanofluidic characteristics difficult to determine experimentally. These include the ion selectivity, the ion concentration distributions, the electrostatic potential landscape, the magnitude of the electro-osmotic flow field, and the internal pressure distribution. Hence, this work provides a means to obtain fundamental new insights into the nanofluidic properties of biological nanopores and paves the way towards their rational engineering.

Current Blockades of Proteins inside Nanopores for Real-Time Metabolome Analysis

Biological nanopores are emerging as powerful and low-cost sensors for real-time analysis of biological samples. Proteins can be incorporated inside the nanopore, and ligand binding to the protein adaptor yields changes in nanopore conductance. In order to understand the origin of these conductance changes and develop sensors for detecting metabolites, we tested the signal originating from 13 different protein adaptors. We found that the quality of the protein signal depended on both the size and charge of the protein. The engineering of a dipole within the surface of the adaptor reduced the current noise by slowing the protein dynamics within the nanopore. Further, the charge of the ligand and the induced conformational changes of the adaptor defined the conductance changes upon metabolite binding, suggesting that the protein resides in an electrokinetic minimum within the nanopore, the position of which is altered by the ligand. These results represent an important step toward understanding the dynamics of the electrophoretic trapping of proteins inside nanopores and will allow developing next-generation sensors for metabolome analysis.

Resolving Chemical Modifications to a Single Amino Acid within a Peptide Using a Biological Nanopore

While DNA sequencing is now amply available, fast, and inexpensive, protein sequencing remains a tremendous challenge. Nanopores may allow for developing a protein sequencer with single-molecule capabilities. As identification of 20 different amino acids currently presents an unsurmountable challenge, fingerprinting schemes are pursued, in which only a subset of amino acids is labeled and detected. This requires modification of amino acids with chemical structures that generate a distinct nanopore ionic current signal. Here, we use a model peptide and the fragaceatoxin C nanopore to characterize six potential tags for a fingerprinting approach using nanopores. We find that labeled and unlabeled proteins can be clearly distinguished and that sensitive detection is obtained for labels with a spectrum of different physicochemical properties such as mass (427-1275 Da), geometry, charge, and hydrophobicity. Additionally, information about the position of the label along the peptide chain can be obtained from individual current-blockade event features. The results represent an important advance toward the development of a single-molecule protein-fingerprinting device with nanopores.

The applications of nanopores in studies of proteins

Nanopores are a label-free platform with the ability to detect subtle changes in the activities of individual biomolecules under physiological conditions. Here, we comprehensively review the technological development of nanopores, focusing on their applications in studying the physicochemical properties and dynamic conformations of peptides, individual proteins, protein-protein complexes and protein-DNA complexes. This is followed by a brief discussion of the potential challenges that need to be overcome before the technology can be widely accepted by the scientific community. We believe that with continued refinement of the technology, significant understanding can be gained to help clarify the role of protein activities in the regulation of cellular physiology and pathogenesis.

Engineering and Modeling the Electrophoretic Trapping of a Single Protein Inside a Nanopore

The ability to confine and to study single molecules has enabled important advances in natural and applied sciences. Recently, we have shown that unlabeled proteins can be confined inside the biological nanopore Cytolysin A (ClyA) and conformational changes monitored by ionic current recordings. However, trapping small proteins remains a challenge. Here, we describe a system where steric, electrostatic, electrophoretic, and electro-osmotic forces are exploited to immobilize a small protein, dihydrofolate reductase (DHFR), inside ClyA. Assisted by electrostatic simulations, we show that the dwell time of DHFR inside ClyA can be increased by orders of magnitude (from milliseconds to seconds) by manipulation of the DHFR charge distribution. Further, we describe a physical model that includes a double energy barrier and the main electrophoretic components for trapping DHFR inside the nanopore. Simultaneous fits to the voltage dependence of the dwell times allowed direct estimates of the cis and trans translocation probabilities, the mean dwell time, and the force exerted by the electro-osmotic flow on the protein (≅9 pN at -50 mV) to be retrieved. The observed binding of NADPH to the trapped DHFR molecules suggested that the engineered proteins remained folded and functional inside ClyA. Contact-free confinement of single proteins inside nanopores can be employed for the manipulation and localized delivery of individual proteins and will have further applications in single-molecule analyte sensing and enzymology studies.

Discrimination of Protein Amino Acid or Its Protonated State at Single-Residue Resolution by Graphene Nanopores

The function of a protein is determined by the composition of amino acids and is essential to proteomics. However, protein sequencing remains challenging due to the protein's irregular charge state and its high-order structure. Here, a proof of principle study on the capability of protein sequencing by graphene nanopores integrated with atomic force microscopy is performed using molecular dynamics simulations. It is found that nanopores can discriminate a protein sequence and even its protonation state at single-residue resolution. Both the pulling forces and current blockades induced by the permeation of protein residues are found to be highly correlated with the type of amino acids, which makes the residues identifiable. It is also found that aside from the dimension, both the conformation and charge state of the residue can significantly influence the force and current signal during its permeation through the nanopore. In particular, due to the electro-osmotic flow effect, the blockade current for the double-protonated histidine is slightly smaller than that for single-protonated histidine, which makes it possible for discrimination of different protonation states of amino acids. The results reported here present a novel protein sequencing scheme using graphene nanopores combined with nanomanipulation technology.

Electro-Mechanical Conductance Modulation of a Nanopore Using a Removable Gate

Ion channels form the basis of information processing in living cells by facilitating the exchange of electrical signals across and along cellular membranes. Applying the same principles to man-made systems requires the development of synthetic ion channels that can alter their conductance in response to a variety of external manipulations. By combining single-molecule electrical recordings with all-atom molecular dynamics simulations, we here demonstrate a hybrid nanopore system that allows for both a stepwise change of its conductance and a nonlinear current-voltage dependence. The conductance modulation is realized by using a short flexible peptide gate that carries opposite electric charge at its ends. We show that a constant transmembrane bias can position (and, in a later stage, remove) the peptide gate right at the most-sensitive sensing region of a biological nanopore FraC, thus partially blocking its channel and producing a stepwise change in the conductance. Increasing or decreasing the bias while having the peptide gate trapped in the pore stretches or compresses the peptide within the nanopore, thus modulating its conductance in a nonlinear but reproducible manner. We envision a range of applications of this removable-gate nanopore system, e.g. from an element of biological computing circuits to a test bed for probing the elasticity of intrinsically disordered proteins.

FraC nanopores with adjustable diameter identify the mass of opposite-charge peptides with 44 dalton resolution

A high throughput single-molecule method for identifying peptides and sequencing proteins based on nanopores could reduce costs and increase speeds of sequencing, allow the fabrication of portable home-diagnostic devices, and permit the characterization of low abundance proteins and heterogeneity in post-translational modifications. Here we engineer the size of Fragaceatoxin C (FraC) biological nanopore to allow the analysis of a wide range of peptide lengths. Ionic blockades through engineered nanopores distinguish a variety of peptides, including two peptides differing only by the substitution of alanine with glutamate. We also find that at pH 3.8 the depth of the peptide current blockades scales with the mass of the peptides irrespectively of the chemical composition of the analyte. Hence, this work shows that FraC nanopores allow direct readout of the mass of single peptide in solution, which is a crucial step towards the developing of a real-time and single-molecule protein sequencing device.

Trapped and non-trapped polymer translocations through a spherical pore

The polymer translocation through a spherical pore is studied using the Langevin dynamics simulation. The translocation events are classified into two types: one is the trapped translocation in which the entire polymer is trapped in the pore and the other is the non-trapped translocation where the pore cannot hold the whole polymer. We find that the trapped translocation is favored at large spheres and small external voltages. However, the monomer-pore attraction would lead to the non-monotonic behavior of the trapped translocation possibility out of all translocation events. Moreover, both the trapped and non-trapped translocation times are dependent on the polymer length, pore size, external voltage, and the monomer-pore attraction. There exist two pathways for the polymer in the trapped translocation: an actively trapped pathway for the polymer trapped in the pore before the head monomer arrives at the pore exit, and a passively trapped pathway for the polymer trapped in the pore while the head monomer is struggling to move out of the pore. The studies of trapped pathways can provide a deep understanding of the polymer translocation behavior.

Simulation study on the translocation of polyelectrolyte through conical nanopores

Experiments have suggested that the conical nanopore may be a reasonable sensor for the biopolymer analysis as it can provide high-resolution current signal. In this paper, we use Langevin dynamics simulation to study the translocation of charged polymer (polyelectrolyte) through three different conical nanopores, a single-conical nanopore with large entry and small exit (pore I), a single-conical nanopore with small entry and large exit (pore II), and a double-conical nanopore with the tip (narrowest place) at the middle (pore III). Simulation shows that the detailed translocation behaviors are of pore structure dependence. Pore I might be the most reasonable one for the polyelectrolyte analysis, especially at strong monomer-pore attraction, since it can efficiently reduce the polyelectrolyte speed at the tip. The simulation results are interpreted by the free energy profiles of the polyelectrolyte translocation through different pores and the time of individual monomer passing through the tips.

Integrated Solid-State Nanopore Electrochemistry Array for Sensitive, Specific, and Label-Free Biodetection

Nanopore ionic current measurement is currently a prevailing readout and offers considerable opportunities for bioassays. Extending conventional electrochemistry to nanoscale space, albeit noteworthy, remains challenging. Here, we report a versatile electrochemistry array established on a nanofluidic platform by controllably depositing gold layers on the two outer sides of anodic aluminum oxide (AAO) nanopores, leading to form an electrochemical microdevice capable of performing amperometry in a label-free manner. Electroactive species ferricyanide ions passing through gold-decorated nanopores act as electrochemical indicator to generate electrolytic current signal. The electroactive species flux that dominates current signal response is closely related to the nanopore permeability. Such well-characteristic electrolytic current-species flux correlation lays a premise for quantitative electrochemical analysis. As a proof-of-concept demonstration, we preliminarily verify the analytical utility by detection of nucleic acid and protein at picomolar concentration levels. Universal surface modification and molecule assembly, specific target recognition and reliable signal output in nanopore enable direct electrochemical detection of biomolecules without the need of cumbersome probe labeling and signal amplification.

Group Behavior of Nanoparticles Translocating Multiple Nanopores

Nanopores have been implemented as nanosensors for DNA sequencing, biomolecule inspection, chemical analysis, nanoparticle detection, etc. For high-throughput and parallelized measurement using nanopore arrays, individual addressability has been a crucial technological solution in order to enable scrutiny of signals generated at each and every nanopore. Here, an alternative pathway of employing arrayed nanopores to perform sensor functions is investigated by examining the group behavior of nanoparticles translocating multiple nanopores. As no individual addressability is required, fabrication of nanopore devices along with microfluidic cells and readout circuits can be greatly simplified. Experimentally, arrays of less than 10 pores are shown to be capable of analyzing translocating nanoparticles with a good signal-to-noise margin. According to theoretical predictions, more pores (than 10) per array can perform high-fidelity analysis if the noise level of the measurement system can be better controlled. More pores per array would also allow for faster measurement at lower concentration because of larger capture cross sections for target nanoparticles. By experimentally varying the number of pores, the concentration of nanoparticles, or the applied bias voltage across the nanopores, we have identified the basic characteristics of this multievent process. By characterizing average pore current and associated standard deviation during translocation and by performing physical modeling and extensive numerical simulations, we have shown the possibility of determining the size and concentration of two kinds of translocating nanoparticles over 4 orders of magnitude in concentration. Hence, we have demonstrated the potential and versatility of the multiple-nanopore approach for high-throughput nanoparticle detection.

Comparative biosensing of glycosaminoglycan hyaluronic acid oligo- and polysaccharides using aerolysin and [Formula: see text]-hemolysin nanopores⋆

Seeking new tools for the analysis of glycosaminoglycans, we have compared the translocation of anionic oligosaccharides from hyaluronic acid using aerolysin and [Formula: see text]-hemolysin nanopores. We show that pores of similar channel length and diameter lead to distinct translocation behavior of the same macromolecules, due to different structural properties of the nanopores. When passing from the vestibule side of the nanopores, short hyaluronic acid oligosaccharides could be detected during their translocation across an aerolysin nanopore but not across an [Formula: see text]-hemolysin nanopore. We were however able to detect longer oligosaccharide fragments, resulting from the in situ enzymatic depolymerization of hyaluronic acid polysaccharides, with both nanopores, meaning that short oligosaccharides were crossing the [Formula: see text]-hemolysin nanopore with a speed too high to be detected. The translocation speed was an order of magnitude higher across [Formula: see text]-hemolysin compared to aerolysin. These results show that the choice of a nanopore to be used for resistive pulse sensing experiments should not rely only on the diameter of the channel but also on other parameters such as the charge repartition within the pore lumen.

The Utility of Nanopore Technology for Protein and Peptide Sensing

Resistive pulse nanopore sensing enables label-free single-molecule analysis of a wide range of analytes. An increasing number of studies have demonstrated the feasibility and usefulness of nanopore sensing for protein and peptide characterization. Nanopores offer the potential to study a variety of protein-related phenomena that includes unfolding kinetics, differences in unfolding pathways, protein structure stability, and free-energy profiles of DNA-protein and RNA-protein binding. In addition to providing a tool for fundamental protein characterization, nanopores have also been used as highly selective protein detectors in various solution mixtures and conditions. This review highlights these and other developments in the area of nanopore-based protein and peptide detection.

Single-molecule nanopore enzymology

Biological nanopores are a class of membrane proteins that open nanoscale water conduits in biological membranes. When they are reconstituted in artificial membranes and a bias voltage is applied across the membrane, the ionic current passing through individual nanopores can be used to monitor chemical reactions, to recognize individual molecules and, of most interest, to sequence DNA. In addition, a more recent nanopore application is the analysis of single proteins and enzymes. Monitoring enzymatic reactions with nanopores, i.e. nanopore enzymology, has the unique advantage that it allows long-timescale observations of native proteins at the single-molecule level. Here, we describe the approaches and challenges in nanopore enzymology.This article is part of the themed issue 'Membrane pores: from structure and assembly, to medicine and technology'.

Identification of single amino acid differences in uniformly charged homopolymeric peptides with aerolysin nanopore

There are still unmet needs in finding new technologies for biomedical diagnostic and industrial applications. A technology allowing the analysis of size and sequence of short peptide molecules of only few molecular copies is still challenging. The fast, low-cost and label-free single-molecule nanopore technology could be an alternative for addressing these critical issues. Here, we demonstrate that the wild-type aerolysin nanopore enables the size-discrimination of several short uniformly charged homopeptides, mixed in solution, with a single amino acid resolution. Our system is very sensitive, allowing detecting and characterizing a few dozens of peptide impurities in a high purity commercial peptide sample, while conventional analysis techniques fail to do so.

Porphyrin-Assisted Docking of a Thermophage Portal Protein into Lipid Bilayers: Nanopore Engineering and Characterization

Nanopore-based sensors for nucleic acid sequencing and single-molecule detection typically employ pore-forming membrane proteins with hydrophobic external surfaces, suitable for insertion into a lipid bilayer. In contrast, hydrophilic pore-containing molecules, such as DNA origami, have been shown to require chemical modification to favor insertion into a lipid environment. In this work, we describe a strategy for inserting polar proteins with an inner pore into lipid membranes, focusing here on a circular 12-subunit assembly of the thermophage G20c portal protein. X-ray crystallography, electron microscopy, molecular dynamics, and thermal/chaotrope denaturation experiments all find the G20c portal protein to have a highly stable structure, favorable for nanopore sensing applications. Porphyrin conjugation to a cysteine mutant in the protein facilitates the protein's insertion into lipid bilayers, allowing us to probe ion transport through the pore. Finally, we probed the portal interior size and shape using a series of cyclodextrins of varying sizes, revealing asymmetric transport that possibly originates from the portal's DNA-ratchet function.

Real-Time Conformational Changes and Controlled Orientation of Native Proteins Inside a Protein Nanoreactor

Protein conformations play crucial roles in most, if not all, biological processes. Here we show that the current carried through a nanopore by ions allows monitoring conformational changes of single and native substrate-binding domains (SBD) of an ATP-Binding Cassette importer in real-time. Comparison with single-molecule Förster Resonance Energy Transfer and ensemble measurements revealed that proteins trapped inside the nanopore have bulk-like properties. Two ligand-free and two ligand-bound conformations of SBD proteins were inferred and their kinetic constants were determined. Remarkably, internalized proteins aligned with the applied voltage bias, and their orientation could be controlled by the addition of a single charge to the protein surface. Nanopores can thus be used to immobilize proteins on a surface with a specific orientation, and will be employed as nanoreactors for single-molecule studies of native proteins. Moreover, nanopores with internal protein adaptors might find further practical applications in multianalyte sensing devices.

Electro-osmotic capture and ionic discrimination of peptide and protein biomarkers with FraC nanopores

Biological nanopores are nanoscale sensors employed for high-throughput, low-cost, and long read-length DNA sequencing applications. The analysis and sequencing of proteins, however, is complicated by their folded structure and non-uniform charge. Here we show that an electro-osmotic flow through Fragaceatoxin C (FraC) nanopores can be engineered to allow the entry of polypeptides at a fixed potential regardless of the charge composition of the polypeptide. We further use the nanopore currents to discriminate peptide and protein biomarkers from 25 kDa down to 1.2 kDa including polypeptides differing by one amino acid. On the road to nanopore proteomics, our findings represent a rationale for amino-acid analysis of folded and unfolded polypeptides with nanopores.

Biological nanopore–based protein sequencing and recognition is challenging due to the folded structure or non-uniform charge of peptides. Here the authors show that engineered FraC nanopores can overcome these problems and recognize biomarkers in the form of oligopeptides, polypeptides and folded proteins.

Nanopore Sensing of Protein Folding

Single-molecule studies of protein folding hold keys to unveiling protein folding pathways and elusive intermediate folding states-attractive pharmaceutical targets. Although conventional single-molecule approaches can detect folding intermediates, they presently lack throughput and require elaborate labeling. Here, we theoretically show that measurements of ionic current through a nanopore containing a protein can report on the protein's folding state. Our all-atom molecular dynamics (MD) simulations show that the unfolding of a protein lowers the nanopore ionic current, an effect that originates from the reduction of ion mobility in proximity to a protein. Using a theoretical model, we show that the average change in ionic current produced by a folding-unfolding transition is detectable despite the orientational and conformational heterogeneity of the folded and unfolded states. By analyzing millisecond-long all-atom MD simulations of multiple protein transitions, we show that a nanopore ionic current recording can detect folding-unfolding transitions in real time and report on the structure of folding intermediates.

Nanoscale Investigation of Generation 1 PAMAM Dendrimers Interaction with a Protein Nanopore

Herein, we describe at uni-molecular level the interactions between poly(amidoamine) (PAMAM) dendrimers of generation 1 and the α-hemolysin protein nanopore, at acidic and neutral pH, and ionic strengths of 0.5 M and 1 M KCl, via single-molecule electrical recordings. The results indicate that kinetics of dendrimer-α-hemolysin reversible interactions is faster at neutral as compared to acidic pH, and we propose as a putative explanation the fine interplay among conformational and rigidity changes on the dendrimer structure, and the ionization state of the dendrimer and the α-hemolysin. From the analysis of the dendrimer's residence time inside the nanopore, we posit that the pH- and salt-dependent, long-range electrostatic interactions experienced by the dendrimer inside the ion-selective α-hemolysin, induce a non-Stokesian diffusive behavior of the analyte inside the nanopore. We also show that the ability of dendrimer molecules to adapt their structure to nanoscopic spaces, and control the flow of matter through the α-hemolysin nanopore, depends non-trivially on the pH- and salt-induced conformational changes of the dendrimer.

Temperature dependence of the translocation time of polymer through repulsive nanopores

The forced translocation of a polymer chain through repulsive nanopores was studied by using Langevin dynamics simulations. The polymer is in the compact globule state at low temperature and in the random coil state at high temperature. Simulation results show that the mean translocation time 〈τ〉 is highly dependent on the temperature T and the minimal 〈τ〉 is located near the coil-globule transition temperature. Moreover, the scaling behaviors 〈τ〉 ∼ N^α and 〈τ〉 ∼ F^-δ are studied, with N the polymer length and F the driving force inside the nanopore. Universal values α = 1.4 and δ = 0.85 are observed for the polymer in the random coil state. While for the polymer in the compact globule state, α decreases from α = 2 at weak driving to 1.2 at strong driving for short N and δ increases with decreasing T in the low F region, but we find universal exponents α = 1.6 for long N and δ = 0.85 in the large F region. Results show that polymer's conformation plays a much more important role than the diffusion coefficient in controlling the translocation time of the polymer chain.

DNA Translocation through Nanopores at Physiological Ionic Strengths Requires Precise Nanoscale Engineering

Many important processes in biology involve the translocation of a biopolymer through a nanometer-scale pore. Moreover, the electrophoretic transport of DNA across nanopores is under intense investigation for single-molecule DNA sequencing and analysis. Here, we show that the precise patterning of the ClyA biological nanopore with positive charges is crucial to observe the electrophoretic translocation of DNA at physiological ionic strength. Surprisingly, the strongly electronegative 3.3 nm internal constriction of the nanopore did not require modifications. Further, DNA translocation could only be observed from the wide entry of the nanopore. Our results suggest that the engineered positive charges are important to align the DNA in order to overcome the entropic and electrostatic barriers for DNA translocation through the narrow constriction. Finally, the dependencies of nucleic acid translocations on the Debye length of the solution are consistent with a physical model where the capture of double-stranded DNA is diffusion-limited while the capture of single-stranded DNA is reaction-limited.

Engineered transmembrane pores

Today, hundreds of researchers are working on nanopores, making an impact in both basic science and biotechnology. Proteins remain the most versatile sources of nanopores, based on our ability to engineer them with sub-nanometer precision. Recent work aimed at the construction and discovery of novel pores has included unnatural amino acid mutagenesis and the application of selection techniques. The diversity of structures has now been increased through the development of helix-based pores as well as the better-known β barrels. New developments also include truncated pores, which pierce bilayers through lipid rearrangement, and hybrid pores, which do away with bilayers altogether. Pore dimers, which span two lipid bilayers, have been constructed and pores based on DNA nanostructures are gaining in importance. While nanopore DNA sequencing has received enthusiastic attention, protein pores have a wider range of potential applications, requiring specifications that will require engineering efforts to continue for years to come.