Direct Conversion of Perovskite Thin Films into Nanowires with Kinetic Control for Flexible Optoelectronic Devices

Template-Assisted Synthesis of a Large-Area Ordered Perovskite Nanowire Array for a High-Performance Photodetector

One-dimensional (1D) organic-inorganic hybrid perovskite nanowires (NWs) with well-defined structures possess superior optical and electrical properties for optoelectronic applications. However, most of the perovskite NWs are synthesized in air, which makes the NWs susceptible to water vapor, resulting in large amounts of grain boundaries or surface defects. Here, a template-assisted antisolvent crystallization (TAAC) method is designed to fabricate CH₃NH₃PbBr₃ NWs and arrays. It is found that the as-synthesized NW array has designable shapes, low crystal defects, and ordered alignment, which is attributed to the sequestration of water and oxygen in air by the introduction of acetonitrile vapor. The photodetector based on the NWs exhibits an excellent response to light illumination. Under the illumination of a 532 nm laser with 0.1 μW and a bias of -1 V, the responsivity and detectivity of the device reach 1.55 A/W and 1.21 × 10¹² Jones, respectively. The transient absorption spectrum (TAS) shows a distinct ground state bleaching signal only at 527 nm, which corresponds to the absorption peak induced by the interband transition of CH₃NH₃PbBr₃. Narrow absorption peaks (a few nanometers) indicate that the energy-level structures of CH₃NH₃PbBr₃ NWs only have a few impurity-level-induced transitions leading to additional optical loss. This work provides an effective and simple strategy to achieve high-quality CH₃NH₃PbBr₃ NWs, which exhibit potential application in photodetection.

A (CH3)2CNHCH3PbBr3/CH3NH3PbBr3 core-shell heterostructure fabricated by an in situ a-site reaction for fast response 1D perovskite photodetectors

Benefitting from their long carrier diffusion lengths, low trap densities and high carrier mobilities, metal halide perovskites are of great value in the field of energy and optical communications. Herein, we propose a reversible organic cation reaction for (CH₃)₂CNHCH₃PbBr₃/CH₃NH₃PbBr₃ core-shell microwires (MWs), in which (CH₃)₂CNHCH₃PbBr₃ grow on bulk CH₃NH₃PbBr₃ in acetone and then convert back to CH₃NH₃PbBr₃ on the surface with the action of water. The core-shell MWs present excellent stability for more than 454 days with over 80% humidity.  Moreover, the employed core-shell heterostructure significantly increases the photoluminescence lifetime and improves the rise/recovery response. The (CH₃)₂CNHCH₃PbBr₃/CH₃NH₃PbBr₃ core-shell heterostructure demonstrates excellent stability and fast response (2.8 ms/0.8 ms), which is anticipated to find comprehensive applications in future optical communication of one-dimensional devices.

Nanostructured perovskites for nonvolatile memory devices

Perovskite materials have driven tremendous advances in constructing electronic devices owing to their low cost, facile synthesis, outstanding electric and optoelectronic properties, flexible dimensionality engineering, and so on. Particularly, emerging nonvolatile memory devices (eNVMs) based on perovskites give birth to numerous traditional paradigm terminators in the fields of storage and computation. Despite significant exploration efforts being devoted to perovskite-based high-density storage and neuromorphic electronic devices, research studies on materials' dimensionality that has dominant effects on perovskite electronics' performances are paid little attention; therefore, a review from the point of view of structural morphologies of perovskites is essential for constructing perovskite-based devices. Here, recent advances of perovskite-based eNVMs (memristors and field-effect-transistors) are reviewed in terms of the dimensionality of perovskite materials and their potentialities in storage or neuromorphic computing. The corresponding material preparation methods, device structures, working mechanisms, and unique features are showcased and evaluated in detail. Furthermore, a broad spectrum of advanced technologies (e.g., hardware-based neural networks, in-sensor computing, logic operation, physical unclonable functions, and true random number generator), which are successfully achieved for perovskite-based electronics, are investigated. It is obvious that this review will provide benchmarks for designing high-quality perovskite-based electronics for application in storage, neuromorphic computing, artificial intelligence, information security, etc.

A Shift from Efficiency to Adaptability: Recent Progress in Biomimetic Interactive Soft Robotics in Wet Environments

Research field of soft robotics develops exponentially since it opens up many imaginations, such as human-interactive robot, wearable robots, and transformable robots in unpredictable environments. Wet environments such as sea and in vivo represent dynamic and unstructured environments that adaptive soft robots can reach their potentials. Recent progresses in soft hybridized robotics performing tasks underwater herald a diversity of interactive soft robotics in wet environments. Here, the development of soft robots in wet environments is reviewed. The authors recapitulate biomimetic inspirations, recent advances in soft matter materials, representative fabrication techniques, system integration, and exemplary functions for underwater soft robots. The authors consider the key challenges the field faces in engineering material, software, and hardware that can bring highly intelligent soft robots into real world.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Oriented Halide Perovskite Nanostructures and Thin Films for Optoelectronics

Oriented semiconductor nanostructures and thin films exhibit many advantageous properties, such as directional exciton transport, efficient charge transfer and separation, and optical anisotropy, and hence these nanostructures are highly promising for use in optoelectronics and photonics. The controlled growth of these structures can facilitate device integration to improve optoelectronic performance and benefit in-depth fundamental studies of the physical properties of these materials. Halide perovskites have emerged as a new family of promising and cost-effective semiconductor materials for next-generation high-power conversion efficiency photovoltaics and for versatile high-performance optoelectronics, such as light-emitting diodes, lasers, photodetectors, and high-energy radiation imaging and detectors. In this Review, we summarize the advances in the fabrication of halide perovskite nanostructures and thin films with controlled dimensionality and crystallographic orientation, along with their applications and performance characteristics in optoelectronics. We examine the growth methods, mechanisms, and fabrication strategies for several technologically relevant structures, including nanowires, nanoplates, nanostructure arrays, single-crystal thin films, and highly oriented thin films. We highlight and discuss the advantageous photophysical properties and remarkable performance characteristics of oriented nanostructures and thin films for optoelectronics. Finally, we survey the remaining challenges and provide a perspective regarding the opportunities for further progress in this field.

Metal Halide Perovskite/2D Material Heterostructures: Syntheses and Applications

The past decade has witnessed the great success achieved by metal halide perovskites (MHPs) in photovoltaic and related fields. However, challenges still remain in further improving their performance, as well as, settling the stability issue for future commercialization. Recently, MHP/2D material heterostructures that combining MHPs with the low-cost and solution-processable 2D materials have demonstrated unprecedented improvement in both performance and stability due to the distinctive features at hetero-interface. The diverse fabrication techniques of MHPs and 2D materials allow them to be assembled as heterostructures with different configurations in a variety of ways. Moreover, the large families of MHPs and 2D materials provide the opportunity for the rational design and modification on compositions and functionalities of MHP/2D materials heterostructures. Herein, a comprehensive review of MHP/2D material heterostructures from syntheses to applications is presented. First, various fabrication techniques for MHP/2D material heterostructures are introduced by classifying them into solid-state methods and solution-processed methods. Then the applications of MHP/2D heterostructures in various fields including photodetectors, solar cells, and photocatalysis are summarized in detail. Finally, current challenges for the development of MHP/2D material heterostructures are highlighted, and future opportunities for the advancements in this research field are also provided.

EA-Directing Formamidinium-Based Perovskite Microwires with A-Site Doping

One recent development to improve optoelectronic properties of perovskites is to use a larger cation for multication engineering. The chain-like ethylammonium (EA) [(C2H5)NH3]+ cation is more likely to form a one-dimensional perovskite structure; however, there is no remarkable evidence in this connection. Therefore, in this work, for the first time, the EA cation as an alternative cation was introduced into FAPbBr3 cubic crystals to explore the stabilities and optoelectronic properties of mixed FA x EA(1-x)PbBr3 perovskites. The results indicate that replacing FA with EA is a more effective way to realize band gap tuning and morphology transformation between the cubic shape and microwires. The tuned band gap of perovskite is due to the variation of Pb-Br-Pb angles induced by the insertion of the larger EA cation. We highlight that this work provides new physical insights into the correlation between the engineering of organic cations and the formation of perovskite microwires and the tunable band gap. This observation will help us to find new ways to grow perovskite microwires and subsequently study the optoelectronic performance of low-dimensional perovskites devices.

Low-Dimensional Metal Halide Perovskite Photodetectors

Metal halide perovskites (MHPs) have been a hot research topic due to their facile synthesis, excellent optical and optoelectronic properties, and record-breaking efficiency of corresponding optoelectronic devices. Nowadays, the development of miniaturized high-performance photodetectors (PDs) has been fueling the demand for novel photoactive materials, among which low-dimensional MHPs have attracted burgeoning research interest. In this report, the synthesis, properties, photodetection performance, and stability of low-dimensional MHPs, including 0D, 1D, 2D layered and nonlayered nanostructures, as well as their heterostructures are reviewed. Recent advances in the synthesis approaches of low-dimensional MHPs are summarized and the key concepts for understanding the optical and optoelectronic properties related to the PD applications of low-dimensional MHPs are introduced. More importantly, recent progress in novel PDs based on low-dimensional MHPs is presented, and strategies for improving the performance and stability of perovskite PDs are highlighted. By discussing recent advances, strategies, and existing challenges, this progress report provides perspectives on low-dimensional MHP-based PDs in the future.

Growth mechanistic insights into perovskite nanocrystals: dimensional growth

The optical and electronic properties of lead halide perovskite nanocrystals have been explored extensively due to their increasing demand in photovoltaic and optoelectronic applications. But little is known about the growth kinetics of these nanocrystals. In this work, we demonstrate an interesting new mechanism using the method of arrested growth and precipitation to isolate the intermediates. We find that growth is driven by oriented attachment competing with the surface energetics. Hence, we observe a rare example of self-assembly driven dimensional growth characterized by suitable surface passivation that competes with the exposed surface facets through dimensional growth. This provides an explanation for not only the lack of size and shape tunability but also the emergence of a cubic shape rather than commonly observed spherical shapes in nanocrystals. Additionally, we find that this also corresponds to the observed phase transitions as well as correlating with pathways of decay of the photoluminescence spectra.

A Potential Checkmate to Lead: Bismuth in Organometal Halide Perovskites, Structure, Properties, and Applications

The remarkable optoelectronic properties and considerable performance of the organo lead-halide perovskites (PVKs) in various optoelectronic applications grasp tremendous scientific attention. However, the existence of the toxic lead in these compounds is threatening human health and remains a major concern in the way of their commercialization. To address this issue, numerous nontoxic alternatives have been reported. Among these alternatives, bismuth-based PVKs have emerged as a promising substitute because of similar optoelectronic properties and extended environmental stability. This work communicates briefly about the possible lead-alternatives and explores bismuth-based perovskites comprehensively, in terms of their structures, optoelectronic properties, and applications. A brief description of lead-toxification is provided and the possible Pb-alternatives from the periodic table are scrutinized. Then, the classification and crystal structures of various Bi-based perovskites are elaborated on. Detailed optoelectronic properties of Bi-based perovskites are also described and their optoelectronic applications are abridged. The overall photovoltaic applications along with device characteristics (i.e., V OC, J SC, fill factor, FF, and power conversion efficiency, PCE), fabrication method, device architecture, and operational stability are also summarized. Finally, a conclusion is drawn where a brief outlook highlights the challenges that hamper the future progress of Bi-based optoelectronic devices and suggestions for future directions are provided.

Back-Reflected Performance-Enhanced Flexible Perovskite Photodetectors through Substrate Texturing with Femtosecond Laser

Recently, enhancing the performance of flexible perovskite photodetectors through facile and effective means has gained greater attention. In contrast to typical approaches through modifying light-active materials, we present here a simple but effective design by improving light-matter interactions through near-field optical interference on a back-reflected substrate, whose architecture includes a morphologically flat top surface and a backscattering surface textured with micro/nanostructures by the femtosecond laser direct writing. A CH₃NH₃PbI₃ perovskite film and poly(ethylene terephthalate) are selected as the light-active and base materials, respectively. Under a 1 V bias voltage actuation and 532 nm laser irradiation at an intensity of 10 mW cm^-2, the flexible device exhibits excellent performance in photoresponsivity (47.1 mA W^-1), detectivity (3.7 × 10¹¹ Jones), and on/off ratio (4600). Due to the near-field optical enhancement of the substrate and the strong light-matter interaction, the above performance parameters are enhanced by at least 5 times over a wide spectral range of 220-780 nm. Such enhancement behaviors are independent of active material properties and therefore can be compatible with other operations such as crystalline transformation, doping, and interface modification. Moreover, the alteration of stress distribution on the structured substrate facilitates the bending robustness and stability. These features highlight the potential of back-reflected design in the development of flexible perovskite photoelectric devices, which are especially suitable for large-scale industrial production.

Synthesis and optical applications of low dimensional metal-halide perovskites

Metal halide perovskites have received substantial attention in research communities due to their outstanding efficiency achievements in the field of photovoltaics, optoelectronics and electronics, exhibiting extraordinary optical, electrical and mechanical properties. The exceptional structural tunability enables perovskite material to possess low-dimensional form at the atomic level and extends their applications into optoelectronic and photonic fields. This review discusses the recent progress of synthetic routes and fundamental optoelectronic properties of low-dimensional metal halide perovskites. In addition, the focus is to highlight the potential applications of perovskites in various devices including solar cells, light-emitting diodes, lasers, waveguides and memory devices. Finally, outlooks and the challenges that face the development of the perovskite materials in the near future are also presented.

Welding Perovskite Nanowires for Stable, Sensitive, Flexible Photodetectors

Compared with a single nanowire (NW) or NW array, the simpler preparation process of an NW network (NWN) enables it to be fabricated in large-scale, flexible, and wearable applications of photodetectors (PDs). However, the NWN behaves many microinterfaces (MIs) between NWs, seriously limiting the device performance and stability. Here, we demonstrate a welding strategy for an MAPbI₃ NWN, which enhances the crystallinity of the NWN and enhances the radial transmission of photogenerated carriers, leading to a better device performance with ultrahigh stability. Our NWN PDs fabricated by using the welding strategy showed ultrahigh performance with an on/off ratio and detectivity of 2.8 × 10⁴ and 4.16 × 10¹² Jones, respectively, which are the best performance for reported metal-semiconductor-metal (MSM) perovskite NWN PDs and are comparable to those of single-NW or NW array PDs. More importantly, our unpackaged NWN PDs show ultrahigh storage stability in air with a humidity of 55-65%, and the flexible NWN PDs can enable 250 bending cycles at different bending radii and 1000 bending cycles at fixed bending radii with no performance degradation being observed. These results indicate our welding strategy is very powerful for improving the performance of the NW device with applications in the wearable field.

Heterogeneous semiconductor nanowire array for sensitive broadband photodetector by crack photolithography-based micro-/nanofluidic platforms

The in situ growth of nanowires (NWs) into nano-/microelectromechanical systems (NEMS/MEMS) by solution processing is attractive for its relative simplicity and economic value.

A chiral lead-free photoactive hybrid material with a narrow bandgap

A chiral lead-free hybrid of (C₅H₁₁N₃)SbI₅ was synthesized that exhibits a narrow bandgap, typical semiconducting behavior and notable photoresponse.

Facile solution synthesis, morphology control, and anisotropic optical performance of CsPbCl3 microcrystals

Anisotropic micrometer-sized CsPbCl₃ crystals were successfully synthesized by a facile solution strategy in several minutes.

Facile Synthesis of Methylammonium Lead Iodide Perovskite with Controllable Morphologies with Enhanced Luminescence Performance

Organic–inorganic hybrid perovskites with well-defined morphology have attracted much attention due to their unique photophysical properties. However, controlling the morphology of nanocrystalline perovskite to improve its photoelectric application remains a challenge. In this article, using a modified solution deposition method, we successfully synthesized uniform methylammonium lead iodide (MAPbI₃) nanoplates, nanocubes, and nanorods and investigated the effect of morphology on the photoelectric properties of these materials. We found that the morphology can be controlled by regulating the amounts of reactant methylammonium iodide (MAI) and the rate at which MAPbI₃ precursor is added into toluene solution, and that the corresponding size distributions can be optimized by tuning the final vacuum-drying temperature. The morphology has an obvious effect on the bandgap optimization and fluorescence enhancement of MAPbI₃, and the nanoplates exhibit stronger photoluminescence intensity and have a longer carrier lifetime than nanocubes and nanorods. The results show that the morphologies of MAPbI₃ perovskite nanocrystals can be controlled by tuning the synthesizing conditions, and the MAPbI₃ perovskite nanocrystals with special morphology can be used in special nanosize optoelectronic devices.

Solution-phase synthesis of CsPbI3 nanowire clusters via polymer-induced anisotropic growth and self-assembly

A facile solution-phase synthesis of black γ-phase CsPbI3 nanowire clusters was developed using poly(methyl methacrylate) (PMMA) as surfactant. PMMA was found to efficiently retard the crystal growth, thereby inducing anisotropic growth for formation of the nanowire structure, while the intermolecular hydrogen bonds of PMMA act as a driving force for self-assembly of the nanowires.

Multiple-engineering controlled growth of tunable-bandgap perovskite nanowires for high performance photodetectors

Controllable growth of perovskite nanowires is very important for various applications in optical and electrical devices. Although significant progress has been achieved in the solution method, a deep understanding of the mechanics of growing perovskite nanowires is still lacking. Herein, we developed an electrochemical method for growing the perovskite nanowires and studied the growth processes systematically. The initial nucleation and crystal growth could be controlled by simply varying the additive solvents, thus leading to two stable size ratio distributions of the perovskite nanowires. Further, with compositional engineering, the bandgap of the perovskites could be tuned from 1.59 eV to 3.04 eV. All the as-grown perovskite nanowires displayed a unique structure with high crystallization quality, contributing to a very high responsivity of 2.1 A W-1 and a large on/off ratio of 5 × 103 for the photodetectors based on the CH3NH3PbBr3 nanowires. All of these findings demonstrate that the optimized solution method offers a new approach to synthesize perovskite nanowires for applications in photoelectric devices.

Flexible Sensors—From Materials to Applications

Flexible sensors have the potential to be seamlessly applied to soft and irregularly shaped surfaces such as the human skin or textile fabrics. This benefits conformability dependant applications including smart tattoos, artificial skins and soft robotics. Consequently, materials and structures for innovative flexible sensors, as well as their integration into systems, continue to be in the spotlight of research. This review outlines the current state of flexible sensor technologies and the impact of material developments on this field. Special attention is given to strain, temperature, chemical, light and electropotential sensors, as well as their respective applications.

Effect of intermediate phases on the optical properties of PbI2-rich CH3NH3PbI3 organic-inorganic hybrid perovskite

Methylammonium lead halide perovskite (CH3NH3PbI3) films, with high PbI2 concentration, were grown by the two-step spin coating method. The influence of the precursor concentration and annealing time on the optical and structural properties of the perovskite films was analyzed by optical absorption, photoluminescence, X-ray diffraction and scanning electron microscopy. The results showed that, in addition to the CH3NH3PbI3 and PbI2 phases, intermediate phases, such as (MA)2(DMF)2Pb3I8, were formed in the films, depending on the time and temperature of annealing, which can tune the optical absorption in the visible spectra. This intermediate phase induced the formation of perovskite nanowires, identified by SEM images, and their growth may be associated with the presence of the DMF solvent remaining in the PbI2 film.

Highly Efficient and Ultrasensitive Large-Area Flexible Photodetector Based on Perovskite Nanowires

Hybrid organic-inorganic perovskites have shown exceptional semiconducting properties and microstructural versatility for inexpensive, solution-processable photovoltaic and optoelectronic devices. In this work, an all-solution-based technique in ambient environment for highly sensitive and high-speed flexible photodetectors using high crystal quality perovskite nanowires grown on Kapton substrate is presented. At 10 V, the optimized photodetector exhibits a responsivity as high as 0.62 A W^-1 , a maximum specific detectivity of 7.3 × 10¹² cm Hz^1/2 W^-1 , and a rise time of 227.2 µs. It also shows remarkable photocurrent stability even beyond 5000 bending cycles. Moreover, a deposition of poly(methyl methacrylate) (PMMA) as a protective layer on the perovskite yields significantly better stability under ambient air operation: the PMMA-protected devices are stable for over 30 days. This work demonstrates a cost-effective fabrication technique for high-performance flexible photodetectors and opens opportunities for research advancements in broadband and large-scale flexible perovskite-based optoelectronic devices.

Recent advances in one-dimensional halide perovskites for optoelectronic applications

Metal-halide perovskites have emerged as efficient, low-cost energy materials owing to their remarkable optoelectronic properties. In particular, the dimensionality and morphology of crystallites may have a striking influence on their chemical and physical properties and therefore affect their optoelectronic applications. One-dimensional halide perovskites have superior carrier transportation in one dimension, high crystalline quality, and consequently, high quantum efficiencies and long carrier diffusion lengths, which are important for the performance of perovskite-based nanoscale optoelectronic and photonic devices. In this review, we highlight recent advances in the synthesis of one-dimensional halide perovskites and their unique properties as well as their novel optoelectronic applications. This review aims to provide an overview of the achievements in synthesis techniques and nanoscale optoelectronic applications based on one-dimensional perovskite nanocrystals.

Solvothermal synthesis of cesium lead halide perovskite nanowires with ultra-high aspect ratios for high-performance photodetectors

One-dimensional (1D) inorganic perovskite nanowires (NWs) have attracted promising attention for application in the fields of photodetection, lasers and lighting due to their outstanding optoelectronic properties. However the direct synthesis of highly pure all-inorganic perovskite NWs with well-defined morphologies and compositions still remains challenging. Here we report the controllable synthesis of brightly emitting cesium lead halide CsPbX₃ (X = Cl, Br) NWs and their assembly into high-performance photodetector nanodevices. High quality CsPbX₃ NWs have been directly synthesized via a solvothermal method without using post-synthetic anion-exchange reactions. The NWs are single-crystalline, with uniform diameters of ∼10 nm and lengths of up to tens of microns, showing ultra-high aspect ratios. Both CsPbCl₃ and CsPbBr₃ NWs show excellent photoluminescence (PL) characteristics with narrow emission spectra and high PL quantum yields (PLQYs). The photodetectors constructed on the CsPbX₃ NWs and interdigital electrodes (with interdigitation widths up to 100 μm) exhibit promising photoelectric properties, achieving high switching ratios (5.8 × 10³ for CsPbCl₃ NW devices and 1.1 × 10³ for CsPbBr₃ NW devices) and fast response time. The present solvothermal approach is controllable, convenient, and is easily realized for quantifiable preparation, and can further promote the application of the all-inorganic perovskite NWs in the optoelectronic field.

Solvent engineering for high conversion yields of layered raw materials into large-scale freestanding hybrid perovskite nanowires

Hybrid organic-inorganic perovskite nanowires have received considerable attention for applications in optoelectronic fields; however, practical implementation of perovskite nanowires into optoelectronic devices is often hindered by low product yields, scaled-up synthesis, or overall lack of synthetic control. Herein, we report novel insights into large-scale freestanding lead halide perovskite nanowires using a series of solvent effects. A facile pathway for converting layered raw materials to nanowires with high conversion yields can facilitate the large-scale applications of nanowires, which could help us understand the unique aspects of the formation chemistry of the materials. We introduced a two-step process to obtain perovskite nanowires without an impurity phase that first involves the formation of Pb-containing nanowires with the poor solvent drip method. Subsequently, the as-prepared Pb-containing precursors can be used as morphology templates for converting completely into perovskite nanowires with high conversion yields of 83% through a series of solvent effects, such as solvent-driven, solvent-removing, solvent-exchange and solvent-growth. The synthetic strategy was demonstrated to be applicable for other perovskite-based materials, which can offer a comprehensive understanding of the formation mechanism of perovskite-based materials.

Perovskite Thin Film Consisting with One-Dimensional Nanowires

Organic-inorganic hybrid perovskite solar cells had attracted extensive attention due to their high-power conversion efficiency and low cost. The morphology and structure of the light absorption layer are crucially important for the device performance. The one-dimensional or two dimensional nano-structure perovskite material exhibits better optical and electrical properties than three-dimensional bulk perovskite. In this article, the perovskite CH₃NH₃PbI₃ thin films with one-dimensional nanowires structure were prepared while using the solution method with N,N-Dimethylformamide (DMF) and dimethyl sulfoxide (DMSO) mixed solvent under atmospheric environment. During the perovskite thin films growth, the DMSO solvent as a structure directing agent played a guiding role in the formation of nanowires. The effects of DMSO solvent added ratio on the perovskite thin film structure, morphology, optical properties, and the device performance were studied. By changing the ratio of DMSO solvent added can effectively adjust the orientation order and optical properties of the nanowires perovskite thin films. The results showed that the best ratio of DMSO solvent added in the mixed solvent was 10%. The high order orientation of the perovskite thin film with nanowires forest was obtained. It showed the high optical absorption and electrical properties. The perovskite absorption layer presents ordered and dispersed nanowires forest; the device power conversation efficiency is increased by 50% when compared with the perovskite layer presents disordered nanowires.

Nanochannel-Assisted Perovskite Nanowires: From Growth Mechanisms to Photodetector Applications

Growing interest in hybrid organic-inorganic lead halide perovskites has led to the development of various perovskite nanowires (NWs), which have potential use in a wide range of applications, including lasers, photodetectors, and light-emitting diodes (LEDs). However, existing nanofabrication approaches lack the ability to control the number, location, orientation, and properties of perovskite NWs. Their growth mechanism also remains elusive. Here, we demonstrate a micro/nanofluidic fabrication technique (MNFFT) enabling both precise control and in situ monitoring of the growth of perovskite NWs. The initial nucleation point and subsequent growth path of a methylammonium lead iodide-dimethylformamide (MAPbI₃·DMF) NW array can be guided by a nanochannel. In situ UV-vis absorption spectra are measured in real time, permitting the study of the growth mechanism of the DMF-mediated crystallization of MAPbI₃. As an example of an application of the MNFFT, we demonstrate a highly sensitive MAPbI₃-NW-based photodetector on both solid and flexible substrates, showing the potential of the MNFFT for low-cost, large-scale, highly efficient, and flexible optoelectronic applications.

In situ synthesis and macroscale alignment of CsPbBr3 perovskite nanorods in a polymer matrix

We report an in situ catalyst-free strategy to synthesize inorganic CsPbBr3 perovskite nanorods in a polymer matrix (NRs-PM) with good dimensional control, outstanding optical properties and ultrahigh environmental stability. Polarization photoluminescence (PL) imaging with high spatial resolution was carried out for the first time on single nanorod (NR) and shows a relatively high local polarization ratio (∼0.4) consistent with theoretical predictions based on a dielectric contrast model. We further demonstrate that macroscale alignment of the CsPbBr3 nanorods can be achieved through mechanically stretching the NRs-PM films at elevated temperature, without deteriorating the optical quality of the NRs. A polarization ratio of 0.23 is observed for these aligned NRs-PM films, suggesting their potential as polarized down-converters to increase the light efficiency in liquid crystal display (LCD) backlights.

Fast Charge Extraction in Perovskite-Based Core-Shell Nanowires

Realizing nanostructured interfaces with precise architectural control enables one to access properties unattainable using bulk materials. In particular, a nanostructured interface ( e. g., a core-shell nanowire) between two semiconductors leads to a short charge separation distance, such that photoexcited charge carriers can be more quickly and efficiently collected. While vapor-phase growth methods are used to synthesize uniform core-shell nanowire arrays of semiconductors such as Si and InP, more general strategies are required to produce related structures composed of a broader range of materials. Herein, we employ anodic aluminum oxide templates to synthesize CH₃NH₃PbI₃ perovskite core-copper thiocyanate shell nanowire arrays employing a combination of electrodeposition and solution casting methods. Using scanning electron microscopy, powder X-ray diffraction, and time-resolved photoluminescence spectroscopy, we confirm the target structure and show that adopting a core-shell nanowire architecture accelerates the rate of charge quenching by nearly 3 orders of magnitude compared to samples with only an axial junction. Subsequently, we fit decay curves to a triexponential function to attribute fast quenching in core-shell nanowires to charge extraction by the copper thiocyanate nanotubes, as opposed to recombination within the perovskite nanowires. Dramatic improvements to charge extraction speed and efficiency result from the substantially reduced charge separation distance and increased interfacial area achieved via the core-shell nanowire array architecture.

Highly Self-Healable 3D Microsupercapacitor with MXene-Graphene Composite Aerogel

High-performance microsupercapacitors (MSCs) with three-dimensional (3D) structure provide an effective approach to improve the ability of energy storage. Because the electrodes with 3D structure are generally easily destroyed under mechanical deformation in practical applications, we fabricated a self-healable 3D MSC consisting of MXene (Ti₃C₂T _x)-graphene (reduced graphene oxide, rGO) composite aerogel electrode by wrapping it with a self-healing polyurethane as an outer shell. The MXene-rGO composite aerogel combining large specific surface area of rGO and high conductivity of the MXene can not only prevent the self-restacking of the lamella structure but also resist the poor oxidization of MXene to a degree. The MSC based on a 3D MXene-rGO aerogel delivers a large area specific capacitance of 34.6 mF cm^-2 at a scan rate of 1 mV s^-1 and an outstanding cycling performance with a capacitance retention up to 91% over 15 000 cycles. The 3D MSC presents an excellent self-healing ability with specific capacitance retention of 81.7% after the fifth healing. The preparation of this self-healable 3D MSC can provide a method for designing and manufacturing next-generation long-life multifunctional electronic devices further to meet the requirements of sustainable development.

High-Switching-Ratio Photodetectors Based on Perovskite CH₃NH₃PbI₃ Nanowires

Hybrid organic-inorganic perovskite materials have attracted extensive attention due to their impressive performance in photovoltaic devices. One-dimensional perovskite CH₃NH₃PbI₃ nanomaterials, possessing unique structural features such as large surface-to-volume ratio, anisotropic geometry and quantum confinement, may have excellent optoelectronic properties, which could be utilized to fabricate high-performance photodetectors. However, in comparison to CH₃NH₃PbI₃ thin films, reports on the fabrication of CH₃NH₃PbI₃ nanowires for optoelectrical application are rather limited. Herein, a two-step spin-coating process has been utilized to fabricate pure-phase and single-crystalline CH₃NH₃PbI₃ nanowires on a substrate without mesoporous TiO₂ or Al₂O₃. The size and density of CH₃NH₃PbI₃ nanowires can be easily controlled by changing the PbI₂ precursor concentration. The as-prepared CH₃NH₃PbI₃ nanowires are utilized to fabricate photodetectors, which exhibit a fairly high switching ratio of ~600, a responsivity of 55 mA/W, and a normalized detectivity of 0.5 × 10¹¹ jones under 532 nm light illumination (40 mW/cm²) at a very low bias voltage of 0.1 V. The as-prepared perovskite CH₃NH₃PbI₃ nanowires with excellent optoelectronic properties are regarded to be a potential candidate for high-performance photodetector application.

Cation Dynamics Governed Thermal Properties of Lead Halide Perovskite Nanowires

Metal halide perovskite (MHP) nanowires such as hybrid organic-inorganic CH₃NH₃PbX₃ (X = Cl, Br, I) have drawn significant attention as promising building blocks for high-performance solar cells, light-emitting devices, and semiconductor lasers. However, the physics of thermal transport in MHP nanowires is still elusive even though it is highly relevant to the device thermal stability and optoelectronic performance. Through combined experimental measurements and theoretical analyses, here we disclose the underlying mechanisms governing thermal transport in three different kinds of lead halide perovskite nanowires (CH₃NH₃PbI₃, CH₃NH₃PbBr₃ and CsPbBr₃). It is shown that the thermal conductivity of CH₃NH₃PbBr₃ nanowires is significantly suppressed as compared to that of CsPbBr₃ nanowires, which is attributed to the cation dynamic disorder. Furthermore, we observed different temperature-dependent thermal conductivities of hybrid perovskites CH₃NH₃PbBr₃ and CH₃NH₃PbI₃, which can be attributed to accelerated cation dynamics in CH₃NH₃PbBr₃ at low temperature and the combined effects of lower phonon group velocity and higher Umklapp scattering rate in CH₃NH₃PbI₃ at high temperature. These data and understanding should shed light on the design of high-performance MHP based thermal and optoelectronic devices.

A lead-free two-dimensional perovskite for a high-performance flexible photoconductor and a light-stimulated synaptic device

Organo-lead halide perovskites have emerged as promising materials for high-performance photodetectors. However, the toxicity of lead cations in these materials limits their further applications. Here, a flexible photoconductor is developed based on lead-free two-dimensional (2D) perovskite (PEA)2SnI4via a one-step solution processing method. The flexible transparent electrodes are patterned from rGO/(PEDOT:PSS) hybrid films. The stability and reproducibility of the devices are significantly improved on adding 30 mol% SnF2 to the perovskite. The flexible photoconductors show a photoresponsivity of 16 A W-1 and a detectivity of 1.92 × 1011 Jones under 470 nm illumination, which are higher than those of most of the similar devices. Besides, the devices possess much better mechanical flexibility and durability than the flexible devices with an Au electrode. Finally, this flexible photoconductor is applied as a light-stimulated synaptic device and can mimic the short-term plasticity of biological synapses. This is the first study to report that lead-free 2D perovskite can be used in flexible photoconductors and synaptic devices.

Perovskite-based photodetectors: materials and devices

While the field of perovskite-based optoelectronics has mostly been dominated by photovoltaics, light-emitting diodes, and transistors, semiconducting properties peculiar to perovskites make them interesting candidates for innovative and disruptive applications in light signal detection. Perovskites combine effective light absorption in the broadband range with good photo-generation yield and high charge carrier mobility, a combination that provides promising potential for exploiting sensitive and fast photodetectors that are targeted for image sensing, optical communication, environmental monitoring or chemical/biological detection. Currently, organic-inorganic hybrid and all-inorganic halide perovskites with controlled morphologies of polycrystalline thin films, nano-particles/wires/sheets, and bulk single crystals have shown key figure-of-merit features in terms of their responsivity, detectivity, noise equivalent power, linear dynamic range, and response speed. The sensing region has been covered from ultraviolet-visible-near infrared (UV-Vis-NIR) to gamma photons based on two- or three-terminal device architectures. Diverse photoactive materials and devices with superior optoelectronic performances have stimulated attention from researchers in multidisciplinary areas. In this review, we provide a comprehensive overview of the recent progress of perovskite-based photodetectors focusing on versatile compositions, structures, and morphologies of constituent materials, and diverse device architectures toward the superior performance metrics. Combining the advantages of both organic semiconductors (facile solution processability) and inorganic semiconductors (high charge carrier mobility), perovskites are expected to replace commercial silicon for future photodetection applications.

Anisotropic flexible transparent films from remaining wood microstructures for screen protection and AgNW conductive substrate

Flexible transparent conductive films or substrates prepared from plastics or cellulose are widely used in optoelectronic devices. However, all of these films or substrates are fabricated by complex and expensive methods, which consume much energy and time. In this work, we report for the first time a remarkably facile and effective approach for fabricating flexible transparent films directly from wood. The resulting films exhibit an array of exceptional optical and mechanical properties. The well-aligned cell structures in natural wood are maintained during delignification, leading to anisotropic films with high transparency (≈90% transmittance). These anisotropic films with well-aligned cell structures show mechanical tensile strengths higher than those of the original wood, and can be used as screen protection films for cellphones. Furthermore, ultrathin, highly transparent, and outstandingly conductive films have been prepared from such films and silver nanowires (AgNWs) using the Meyer technique. A conductive film with an optimal area density (341 mg m^-2) of AgNWs showed outstanding synergistic properties, with a transmittance of 80% and a sheet resistance of 11 Ω sq^-1, equal to the conductivity of ITO. Of importance here is that the low-cost anisotropic transparent wood film shows promising potential for electronics applications in solar cells, flexible displays, and other products.

Amine treatment induced perovskite nanowire network in perovskite solar cells: efficient surface passivation and carrier transport

In the fabrication of high efficiency organic-inorganic metal halide perovskite solar cells (PSCs), an additional interface modifier is usually applied for enhancing the interface passivation and carrier transport. In this paper, we develop an innovative method with in-situ growth of one-dimensional perovskite nanowire (1D PNW) network triggered by Lewis amine over the perovskite films. To our knowledge, this is the first time to fabricate PSCs with shape-controlled perovskite surface morphology, which improved power conversion efficiency (PCE) from 14.32% to 16.66% with negligible hysteresis. The amine molecule can passivate the trap states on the polycrystalline perovskite surface to reduce trap-state density. Meanwhile, as a fast channel, the 1D PNWs would promote carrier transport from the bulk perovskite film to the electron transport layer. The PSCs with 1D PNW modification not only exhibit excellent photovoltaic performances, but also show good stability with only 4% PCE loss within 30 days in the ambient air without encapsulation. Our results strongly suggest that in-situ grown 1D PNW network provides a feasible and effective strategy for nanostructured optoelectronic devices such as PSCs to achieve superior performances.

Structural effects on optoelectronic properties of halide perovskites

This review gives a perspective on different synthetic methodologies for the preparation of halide perovskites and highlights the structural effects on their optoelectronic properties.

Photodetectors Based on Organic-Inorganic Hybrid Lead Halide Perovskites

Recent years have witnessed skyrocketing research achievements in organic-inorganic hybrid lead halide perovskites (OIHPs) in the photovoltaic field. In addition to photovoltaics, more and more studies have focused on OIHPs-based photodetectors in the past two years, due to the remarkable optoelectronic properties of OIHPs. This article summarizes the latest progress in this research field. To begin with, the factors influencing the performance of photodetectors are discussed, including both internal and external factors. In particular, the channel width and the incident power intensities should be taken into account to precisely and objectively evaluate and compare the output performance of different photodetectors. Next, photodetectors fabricated on single-component perovskites in terms of different micromorphologies are discussed, namely, 3D thin-film and single crystalline, 2D nanoplates, 1D nanowires, and 0D nanocrystals, respectively. Then, bilayer structured perovskite-based photodetectors incorporating inorganic and organic semiconductors are discussed to improve the optoelectronic performance of their pristine counterparts. Additionally, flexible OIHPs-based photodetectors are highlighted. Finally, a brief conclusion and outlook is given on the progress and challenges in the field of perovskites-based photodetectors.

Self-Catalyzed Vapor-Liquid-Solid Growth of Lead Halide Nanowires and Conversion to Hybrid Perovskites

Lead halide perovskites (LHPs) have shown remarkable promise for use in photovoltaics, photodetectors, light-emitting diodes, and lasers. Although solution-processed polycrystalline films are the most widely studied morphology, LHP nanowires (NWs) grown by vapor-phase processes offer the potential for precise control over crystallinity, phase, composition, and morphology. Here, we report the first demonstration of self-catalyzed vapor-liquid-solid (VLS) growth of lead halide (PbX₂; X = Cl, Br, or I) NWs and conversion to LHP. We present a kinetic model of the PbX₂ NW growth process in which a liquid Pb catalyst is supersaturated with halogen X through vapor-phase incorporation of both Pb and X, inducing growth of a NW. For PbI₂, we show that the NWs are single-crystalline, oriented in the ⟨1̅21̅0⟩ direction, and composed of a stoichiometric PbI₂ shaft with a spherical Pb tip. Low-temperature vapor-phase intercalation of methylammonium iodide converts the NWs to methylammonium lead iodide (MAPbI₃) perovskite while maintaining the NW morphology. Single-NW experiments comparing measured extinction spectra with optical simulations show that the NWs exhibit a strong optical antenna effect, leading to substantially enhanced scattering efficiencies and to absorption efficiencies that can be more than twice that of thin films of the same thickness. Further development of the self-catalyzed VLS mechanism for lead halide and perovskite NWs should enable the rational design of nanostructures for various optoelectronic technologies, including potentially unique applications such as hot-carrier solar cells.

Flexible Photodetectors Based on Novel Functional Materials

Flexible photodetectors have attracted a great deal of research interest in recent years due to their great possibilities for application in a variety of emerging areas such as flexible, stretchable, implantable, portable, wearable and printed electronics and optoelectronics. Novel functional materials, including materials with zero-dimensional (0D) and one-dimensional (1D) inorganic nanostructures, two-dimensional (2D) layered materials, organic semiconductors and perovskite materials, exhibit appealing electrical and optoelectrical properties, as well as outstanding mechanical flexibility, and have been widely studied as building blocks in cost-effective flexible photodetection. Here, we comprehensively review the outstanding performance of flexible photodetectors made from these novel functional materials reported in recent years. The photoresponse characteristics and flexibility of the devices will be discussed systematically. Summaries and challenges are provided to guide future directions of this vital research field.

Hybrid Organic-Inorganic Perovskite Photodetectors

Hybrid organic-inorganic perovskite materials garner enormous attention for a wide range of optoelectronic devices. Due to their attractive optical and electrical properties including high optical absorption coefficient, high carrier mobility, and long carrier diffusion length, perovskites have opened up a great opportunity for high performance photodetectors. This review aims to give a comprehensive summary of the significant results on perovskite-based photodetectors, focusing on the relationship among the perovskite structures, device configurations, and photodetecting performances. An introduction of recent progress in various perovskite structure-based photodetectors is provided. The emphasis is placed on the correlation between the perovskite structure and the device performance. Next, recent developments of bandgap-tunable perovskite and hybrid photodetectors built from perovskite heterostructures are highlighted. Then, effective approaches to enhance the stability of perovskite photodetector are presented, followed by the introduction of flexible and self-powered perovskite photodetectors. Finally, a summary of the previous results is given, and the major challenges that need to be addressed in the future are outlined. A comprehensive summary of the research status on perovskite photodetectors is hoped to push forward the development of this field.

Directional Growth of Ultralong CsPbBr3 Perovskite Nanowires for High-Performance Photodetectors

Directional growth of ultralong nanowires (NWs) is significant for practical application of large-scale optoelectronic integration. Here, we demonstrate the controlled growth of in-plane directional perovskite CsPbBr₃ NWs, induced by graphoepitaxial effect on annealed M-plane sapphire substrates. The wires have a diameter of several hundred nanometers, with lengths up to several millimeters. Microstructure characterization shows that CsPbBr₃ NWs are high-quality single crystals, with smooth surfaces and well-defined cross section. The NWs have very strong band-edge photoluminescence (PL) with a long PL lifetime of ∼25 ns and can realize high-quality optical waveguides. Photodetectors constructed on these individual NWs exhibit excellent photoresponse with an ultrahigh responsivity of 4400 A/W and a very fast response speed of 252 μs. This work presents an important step toward scalable growth of high-quality perovskite NWs, which will provide promising opportunities in constructing integrated nanophotonic and optoelectronic systems.

Synthetic Manipulation of Hybrid Perovskite Systems in Search of New and Enhanced Functionalities

Over the past few years the organic-inorganic hybrid perovskite systems have emerged as a promising class of materials for photovoltaic and electroluminescent thin-film device applications, in view of their unique set of tunable optoelectronic properties. Importantly, these materials can be easily solution-processed at low temperatures and as such are amenable to facile molecular engineering. Thus, a variety of low-dimensional forms and quantum structures of these materials can be obtained through strategic synthetic manipulations through small molecule incorporation or molecular ion doping. In this Minireview, we specifically focus on these approaches and outline the possibilities of utilizing these for enhanced functionalities and newer application domains.

An ultrafast-temporally-responsive flexible photodetector with high sensitivity based on high-crystallinity organic-inorganic perovskite nanoflake

Flexible cameras are important early warning wearable devices to protect security personnel from dangerous events. However, the desired key component of flexible cameras, a highly-sensitive and high-response-speed flexible photodetector, is difficult to create using conventional inorganic semiconductors. Here, we propose a low-temperature synthesis method to grow perovskite nanoflakes with high flexibility and crystallinity on a polymeric substrate. Furthermore, a high-performance flexible photodetector based on the obtained perovskite nanoflakes was fabricated. Its photoresponsivity rivals the highest values reported and, simultaneously, its response speed is faster than those of most current flexible photodetectors by 1-3 orders of magnitude.

Solution synthesis and phase control of inorganic perovskites for high-performance optoelectronic devices

An efficient method to synthesize well-crystallized inorganic cesium lead halide perovskites (CsPbX₃, X = I or Br) with high yield and high reproducibility was proposed. Notably, the as-prepared CsPbI₃ in the yellow orthorhombic phase (y-CsPbI₃) can be easily converted to the black cubic perovskite phase CsPbI₃ (b-CsPbI₃) after thermal annealing. Furthermore, two-terminal photodetectors and all-inorganic perovskite solar cells based on b-CsPbI₃ were fabricated, exhibiting high performances.