G-Quadruplexes Light up Localized DNA Circuits

Driving DNA Nanopore Membrane Insertion through Dipolar Coupling

DNA nanopores appear to be a plausible alternative to the use of transmembrane proteins. The specificity and programmability of DNA interactions allow the design of synthetic channels that insert into lipid bilayers and can regulate the ionic transport across them. In this Communication, we investigate the dependence of insertion capabilities on the electrostatic properties of the nanopore and show that the presence of a permanent electric dipole is an important factor for the nanopore to insert into the membrane. On the contrary, in the absence of such a dipole, most DNA nanopores bind to the bilayer without channel formation. We also show that this modification does not hinder the possibility of triggering a measurable conformational change with a single short oligonucleotide.

Cascade branch migration-triggered strand displacement amplification for specific and sensitive detection of microRNA

MicroRNAs (miRNAs) have been involved in many biological processes and are regarded as promising biomarkers. The short sequence, low abundance and highly homologous interference sequences greatly hinder the accurate detection of miRNAs. Here, a cascade branch migration-triggered strand displacement amplification (CBM-TSDA) strategy was developed for the first time for specific and sensitive detection of miRNA-155 (miR-155). In the presence of target miR-155, the CBM was initiated and two Y-shaped probes were eventually produced. Next, the Y-shaped probes were transformed into three-way junction (3WJ) structures and triggered the SDA to produce a large number of G-quadruplex (G4) structures. Finally, the increased fluorescence signal of G4/Thioflavin T (ThT) was used to quantify miR-155. Meanwhile, the colorimetric responses of the G4-hemin DNAzyme could be used as supplementary detection to obtain a dual-mode signal readout. This detection strategy showed high detection sensitivity, and the limit of detection was 0.28 pM in the fluorescence detection mode and 0.34 pM in the colorimetric detection mode. Notably, it showed high detection specificity, being able to discriminate the single-base mutations of the target with a high discrimination factor. The strategy also possessed excellent capacity for miR-155 detection in cell lysates and real human blood samples. The developed strategy provides a promising detection platform for miRNA, which may be applied to early clinical diagnosis.

DNA Logic Gates Integrated on DNA Substrates in Molecular Computing

Due to nucleic acid's programmability, it is possible to realize DNA structures with computing functions, and thus a new generation of molecular computers is evolving to solve biological and medical problems. Pioneered by Milan Stojanovic, Boolean DNA logic gates created the foundation for the development of DNA computers. Similar to electronic computers, the field is evolving towards integrating DNA logic gates and circuits by positioning them on substrates to increase circuit density and minimize gate distance and undesired crosstalk. In this minireview, we summarize recent developments in the integration of DNA logic gates into circuits localized on DNA substrates. This approach of all-DNA integrated circuits (DNA ICs) offers the advantages of biocompatibility, increased circuit response, increased circuit density, reduced unit concentration, facilitated circuit isolation, and facilitated cell uptake. DNA ICs can face similar challenges as their equivalent circuits operating in bulk solution (bulk circuits), and new physical challenges inherent in spatial localization. We discuss possible avenues to overcome these obstacles.

Proximity hybridization induced bipedal DNA walker for label-free electrochemical detection of apolipoprotein A4 based on DNA meditated Ag nanoparticles growth

Apolipoprotein A4 (Apo-A4) is considered as a prospective molecular biomarker for diagnosis of depression due to its neurosynaptic toxicity. Here, we propose a neighboring hybridization induced catalyzed hairpin assembly (CHA) driven bipedal DNA walker that mediates hybridization of Ag nanoparticles (Ag NPs) with DNA probes for highly sensitive electrochemical quantitative detection of Apo-A4. Driven by CHA, this bipedal DNA walker can spread all over the surface of the sensor, induce the HP1-HP2 double chain structure, make the surface of the sensor negatively charged, and adsorb a large number of Ag ions. After chemical reduction with hydroquinone, the Ag NPs formed provide signal tracers for electrochemical dissolution analysis of the target. The Ag NPs formed by chemical reduction of hydroquinone can provide signal traces for electrochemical stripping analysis of target thrombin. The linear range of this method is from 10 pg mL-1 to 1000 ng mL-1, and the detection limit is 5.1 pg mL-1. This enzyme-free and labeling detection method provides a new strategy for rapid clinical detection of Apo-A4 and accurate identification of depression.

Simulation-Assisted Localized DNA Logical Circuits for Cancer Biomarkers Detection and Imaging

DNA-based nanodevices equipped with localized modules have been promising probes for biomarker detection. Such devices heavily rely on the intramolecular hybridization reaction. However, there is a lack of mechanistic insights into this reaction that limits the sensing speed and sensitivity. A coarse-grained model is utilized to simulate the intramolecular hybridization of localized DNA circuits (LDCs) not only optimizing the performance, but also providing mechanistic insights into the hybridization reaction. The simulation guided-LDCs enable the detection of multiple biomarkers with high sensitivity and rapid speed showing good consistency with the simulation. Fluorescence assays demonstrate that the simulation-guided LDC shows an enhanced sensitivity up to 9.3 times higher than that of the same probes without localization. The detection limits of ATP, miRNA, and APE1 reach 0.14 mM, 0.68 pM, and 0.0074 U mL^-1 , respectively. The selected LDC is operated in live cells with good success in simultaneously detecting the biomarkers and discriminating between cancer cells and normal cells. LDC is successfully applied to detect the biomarkers in cancer tissues from patients, allowing the discrimination of cancer/adjacent/normal tissues. This work herein presents a design workflow for DNA nanodevices holding great potential for expanding the applications of DNA nanotechnology in diagnostics and therapeutics.

DNA Logic Nanodevices for the Sequential Imaging of Cancer Markers through Localized Catalytic Hairpin Assembly Reaction

Monitoring tumor biomarkers is crucial for cancer diagnosis, progression monitoring, and treatment. However, identifying single or multiple biomarkers with the same spatial locations can cause false-positive feedback. Herein, we integrated the DNA tetrahedron (DT) structures with logic-responsive and signal amplifying capability to construct transmembrane DNA logic nanodevices (TDLNs) for the in situ sequential imaging of transmembrane glycoprotein mucin 1 (MUC1) and cytoplasmic microRNA-21 (miR-21) to cell identifications. The TDLNs were developed by encoding two metastable hairpin DNAs (namely, H1 and H2) in a DT scaffold, in which the triggering toeholds of H1 for miR-21 were sealed by the MUC1-specific aptamer (MUC1-apt). The TDLNs not only had the function of signal amplification owing to the localized catalytic hairpin assembly (CHA) reaction through spatial constraints effect of DT structures but also performed an AND logic operation to output a green Cy3 signal in MCF-7 cells, where MUC1 protein and miR-21 were simultaneously expressed. These results showed that the newly developed TDLNs have better molecular targeting and recognition ability so as to be easily identify cell types and diagnose cancer early.

An analytical study of lipid-oligonucleotide aggregation properties

Lipid-oligonucleotides (LON) attract great interest as supramolecular scaffolds to improve the intracellular delivery of nucleic acids. Analytical characterization of LON assemblies is critical to formulation development, understanding in-vivo performance, as well as quality control. For this study, we selected LONs featuring different modifications on both oligonucleotide (with or without a G4 prone sequence) and lipid (mono or bis-alkyl chain covalently attached to the oligonucleotide sequence). Size exclusion chromatography (SEC) and, for the first time, capillary electrophoresis (CE) were investigated to study LON supramolecular self-assemblies. Results were correlated to those obtained with conventional physico-chemical characterization techniques i.e. gel electrophoresis, dynamic light scattering, and circular dichroism. In SEC, a separation between LON monomers and micelles was achieved in 5min on a TSK-gel G3000PW column at 70°C with 100% water, as mobile phase. CE conditions were optimized using a fused-silica capillary length of 10.0cm effective length at 15°C. Different background electrolytes were tested by varying the nature and the concentration of salts added. A sodium tetraborate buffer with 75mM NaCl appeared suitable to promote LON assembly. CE offers benefits to LON micelle analysis in terms of speed of analysis, high resolution, and low quantity of sample injected. Moreover, CE provides an appropriate tool to assess the impact of media of biological relevance on LON self-assembly. In this work, the key role of lipophilic tails and the formation of tetramolecular G-quadruplexes on the stability of LON micelles was confirmed.

Biocomputing Based on DNA Strand Displacement Reactions

The high sequence specificity and precise base complementary pairing principle of DNA provides a rich orthogonal molecular library for molecular programming, making it one of the most promising materials for developing bio-compatible intelligence. In recent years, DNA has been extensively studied and applied in the field of biological computing. Among them, the toehold-mediated strand displacement reaction (SDR) with properties including enzyme free, flexible design and precise control, have been extensively used to construct biological computing circuits. This review provides a systemic overview of SDR design principles and the applications. Strategies for designing DNA-only, enzymes-assisted, other molecules-involved and external stimuli-controlled SDRs are described. The recently realized computing functions and the application of DNA computing in other fields are introduced. Finally, the advantages and challenges of SDR-based computing are discussed.

Molecular Rotors as Guest Fluorophores Probing the Local Environment inside Host G4 Supramolecular Hydrogels

Fluorescent molecular rotors with a high binding affinity toward the guanosine quartet (G4) were incorporated as guest fluorophores into host supramolecular hydrogels based on the self-assembly of G4 units, to probe the local environment. Torsional dynamics of the rotors were severely inhibited inside the hydrogels in comparison with aqueous solutions, although the hydrogels were composed of >95% water. Moreover, even though all the gels were rigid bodies with no spontaneous deformation or flow property at room temperature, torsional dynamics in G4 borate gels was found to be consistently several orders of magnitude slower than those in the other G4 gels, irrespective of the identity of the molecular rotor probe. This clear difference in the molecular mobilities of the guest fluorophore could be attributed to systematic differences in the internal structure between the two categories of host G4 hydrogels. In specific terms, the borate groups in G4 borate hydrogels serve as bridging units between separate G4 quadruplex strands, generating additional cross-links that reinforce the network structure of the gel. The results demonstrate that molecular rotors act as efficient fluorescent probes for the quantitative assessment of the molecular-level environment and dynamics inside the hydrogels, an aspect that is missed out by most other analytical methods that are routinely employed for studying them.

Recent Update on Targeting c-MYC G-Quadruplexes by Small Molecules for Anticancer Therapeutics

Guanine-rich DNA sequences have the propensity to adopt four-stranded tetrahelical G-quadruplex (G4) structures that are overrepresented in gene promoters. The structural polymorphism and physicochemical properties of these non-Watson-Crick G4 structures make them important targets for drug development. The guanine-rich nuclease hypersensitivity element III₁ present in the upstream of P1 promoter of c-MYC oncogene has the ability to form an intramolecular parallel G4 structure. The G4 structure that forms transiently in the c-MYC promoter functions as a transcriptional repressor element. The c-MYC oncogene is overexpressed in a wide variety of cancers and plays a key role in cancer progression. Till now, a large number of compounds that are capable of interacting and stabilizing thec-MYC G4 have been reported. In this review, we summarize various c-MYC G4 specific molecules and discuss their effects on c-MYC gene expression in vitro and in vivo.

Reversible reconfiguration of high-order DNA nanostructures by employing G-quartet toeholds as adhesive units

G-quadruplex structures are becoming useful alternative interaction modules for the assembly of DNA nanomaterials because of their unique inducibility by cations. In this study, we demonstrated a new strategy for the assembly of polymeric DNA nanoarchitectures in the presence of cations, such as K⁺ and Na⁺, by employing G-quartet toeholds at the edges of discrete mini-square DNA building blocks as adhesive units. In comparison with the Watson-Crick base-paired duplex linkers, G-quadruplex arrays embedded in the self-assembled DNA system exhibit higher thermal stability. The morphology of these doughnut-shaped or spherical-shaped DNA nanostructures is highly regulated by the orientation of the folded G-quadruplexes either in parallel or antiparallel orientation in response to different cations. Furthermore, this G-quadruplex-mediated assembly strategy is able to manipulate the cycling of DNA assemblies between discrete and polymeric states by means of introducing cations and chelating agents sequentially. This property enables the reversible manipulation of the DNA-based nanosystems for at least 4 cycles. The G-quadruplex array embedded in this self-assembled DNA system can become a scaffold for functional molecules, as a number of organic molecules and proteins exhibit specific binding to these G-quadruplex structures. Besides, embedded G-quadruplexes are also considered as functional components of nanoscale electronic materials due to their electron transport through the stacked orientation of the G-quartet. Therefore, this work is an important step towards obtaining reversible, responsive G-quadruplex-induced DNA-based nanomaterials with versatile functionalities which will be highly useful in further electronic, biomedical and drug-delivery applications.

Binding-Induced 3D-Bipedal DNA Walker for Cascade Signal Amplification Detection of Thrombin Combined with Catalytic Hairpin Assembly Strategy

As an important biomarker, thrombin (TB) is a major player in thrombosis and hemostasis and has attracted increasing attention involving its determination. Herein a universal and ultrasensitive fluorescence biosensor based on a binding-induced 3D-bipedal DNA walker and catalytic hairpin assembly (CHA) strategy has been proposed for cascade signal amplification detection of thrombin. In this study, we designed two proximity probes (foot 1 and foot 2) which include a specific affinity ligand for TB binding and a Pb²⁺-dependent DNAzyme tail sequence. In the presence of TB, the simultaneous binding of TB to foot 1 (F1) and foot 2 (F2) via TB aptamer (TBA) brings the tail sequences into close proximity and the melting temperature for tail sequences and track DNA is increased, allowing the Pb²⁺-dependent DNAzyme to cleave the track DNA into two short fragments which have lower affinities for the DNAzyme and, finally, leading to the release of trigger DNA (T-DNA) for subsequent CHA reaction. In the meantime, the dissociated DNA walkers (F1 and F2) explore adjacent unwound track DNA, and the walking procedure is conducted. Unlike the conventional unipedal DNA walkers that anchor foot DNA and track DNA on the same sensing surface, the proposed 3D-bipedal DNA walking machine can not only increase the local concentration of track DNA but can also improve the walking efficiency and expand the range of the walkers to some extent due to the two free feet. Moreover, with the advantages of superior sensitivity and excellent specificity, this biosensing platform exhibits a huge potential in practical application in biomedical research and clinical diagnosis.

Bioapplications of DNA nanotechnology at the solid-liquid interface

DNA nanotechnology engineered at the solid-liquid interface has advanced our fundamental understanding of DNA hybridization kinetics and facilitated the design of improved biosensing, bioimaging and therapeutic platforms. Three research branches of DNA nanotechnology exist: (i) structural DNA nanotechnology for the construction of various nanoscale patterns; (ii) dynamic DNA nanotechnology for the operation of nanodevices; and (iii) functional DNA nanotechnology for the exploration of new DNA functions. Although the initial stages of DNA nanotechnology research began in aqueous solution, current research efforts have shifted to solid-liquid interfaces. Based on shape and component features, these interfaces can be classified as flat interfaces, nanoparticle interfaces, and soft interfaces of DNA origami and cell membranes. This review briefly discusses the development of DNA nanotechnology. We then highlight the important roles of structural DNA nanotechnology in tailoring the properties of flat interfaces and modifications of nanoparticle interfaces, and extensively review their successful bioapplications. In addition, engineering advances in DNA nanodevices at interfaces for improved biosensing both in vitro and in vivo are presented. The use of DNA nanotechnology as a tool to engineer cell membranes to reveal protein levels and cell behavior is also discussed. Finally, we present challenges and an outlook for this emerging field.

DNA Quadruple Helices in Nanotechnology

DNA has played an early and powerful role in the development of bottom-up nanotechnologies, not least because of DNA's precise, predictable, and controllable properties of assembly on the nanometer scale. Watson-Crick complementarity has been used to build complex 2D and 3D architectures and design a number of nanometer-scale systems for molecular computing, transport, motors, and biosensing applications. Most of such devices are built with classical B-DNA helices and involve classical A-T/U and G-C base pairs. However, in addition to the above components underlying the iconic double helix, a number of alternative pairing schemes of nucleobases are known. This review focuses on two of these noncanonical classes of DNA helices: G-quadruplexes and the i-motif. The unique properties of these two classes of DNA helix have been utilized toward some remarkable constructions and applications: G-wires; nanostructures such as DNA origami; reconfigurable structures and nanodevices; the formation and utilization of hemin-utilizing DNAzymes, capable of generating varied outputs from biosensing nanostructures; composite nanostructures made up of DNA as well as inorganic materials; and the construction of nanocarriers that show promise for the therapeutics of diseases.

Enzyme-Regulated DNA-Based Logic Device

Herein, we report a carbazole (Cz) ligand that displays distinct turn-on fluorescence signals upon interaction with human telomeric G-quadruplex ( h-TELO) and nuclease enzymes. Interestingly, Cz selectively binds and stabilizes the mixed hybrid topology of h-TELO G-quadruplex that withstands digestion by exonucleases and nuclease S1. The distinct fluorescence signatures of Cz-stabilized h-TELO with nucleases are used to design conceptually novel DNA devices for selectively detecting the enzymatic activity of DNase I as well as performing logic operations. An INHIBIT logic gate is constructed using h-TELO and DNase I as the inputs while the inputs of h-TELO and nuclease S1 form a YES logic gate. Furthermore, a two-input two-output reusable logic device with "multireset" function is developed by using h-TELO and DNase I as inputs. On the basis of this platform, combinatorial logic systems (INHIBIT-INHIBIT and NOR-OR) have been successfully installed using different combinations of nucleases as inputs. Moreover, this new strategy of using a synthetic dual emissive probe and enzyme/DNA inputs for constructing reusable logic device may find important applications in biological computing and information processing.

DNA-based nanoscale walking devices and their applications

Herein we review DNA-based nanoscale walking devices including unipedal, bipedal, multipedal, and other novel walking devices and their applications.

Controlling G-quadruplex formation via lipid modification of oligonucleotide sequences

G-quadruplexes (G4) represent attractive supramolecular scaffolds.