High Temperature Ferromagnetism in a GdAg2 Monolayer

The Role of Rare-Earth Atoms in the Anisotropy and Antiferromagnetic Exchange Coupling at a Hybrid Metal-Organic Interface

Magnetic anisotropy and magnetic exchange interactions are crucial parameters that characterize the hybrid metal-organic interface, a key component of an organic spintronic device. It is shown that the incorporation of 4f RE atoms to hybrid metal-organic interfaces of CuPc/REAu2 type (RE = Gd, Ho) constitutes a feasible approach toward on-demand magnetic properties and functionalities. The GdAu2 and HoAu2 substrates differ in their magnetic anisotropy behavior. Remarkably, the HoAu2 surface promotes the inherent out-of-plane anisotropy of CuPc, owing to the match between the anisotropy axis of substrate and molecule. Furthermore, the presence of RE atoms leads to a spontaneous antiferromagnetic exchange coupling at the interface, induced by the 3d-4f superexchange interaction between the unpaired 3d electron of CuPc and the 4f electrons of the RE atoms. It is shown that 4f RE atoms with unquenched quantum orbital momentum ( L $L$ ), as it is the case of Ho, induce an anisotropic interfacial exchange coupling.

Two-dimensional heavy fermion in a monoatomic-layer Kondo lattice YbCu2

The Kondo effect between localized f-electrons and conductive carriers leads to exotic physical phenomena. Among them, heavy-fermion (HF) systems, in which massive effective carriers appear due to the Kondo effect, have fascinated many researchers. Dimensionality is also an important characteristic of the HF system, especially because it is strongly related to quantum criticality. However, the realization of the perfect two-dimensional (2D) HF materials is still a challenging topic. Here, we report the surface electronic structure of the monoatomic-layer Kondo lattice YbCu2 on a Cu(111) surface observed by synchrotron-based angle-resolved photoemission spectroscopy. The 2D conducting band and the Yb 4f state, located very close to the Fermi level, are observed. These bands are hybridized at low-temperature, forming the 2D HF state, with an evaluated coherence temperature of about 30 K. The effective mass of the 2D state is enhanced by a factor of 100 by the development of the HF state. Furthermore, clear evidence of the hybridization gap formation in the temperature dependence of the Kondo-resonance peak has been observed below the coherence temperature. Our study provides a new candidate as an ideal 2D HF material for understanding the Kondo effect at low dimensions.

Experimental Demonstration of a Magnetically Induced Warping Transition in a Topological Insulator Mediated by Rare-Earth Surface Dopants

Magnetic topological insulators constitute a novel class of materials whose topological surface states (TSSs) coexist with long-range ferromagnetic order, eventually breaking time-reversal symmetry. The subsequent bandgap opening is predicted to co-occur with a distortion of the TSS warped shape from hexagonal to trigonal. We demonstrate such a transition by means of angle-resolved photoemission spectroscopy on the magnetically rare-earth (Er and Dy) surface-doped topological insulator Bi₂Se₂Te. Signatures of the gap opening are also observed. Moreover, increasing the dopant coverage results in a tunable p-type doping of the TSS, thereby allowing for a gradual tuning of the Fermi level toward the magnetically induced bandgap. A theoretical model where a magnetic Zeeman out-of-plane term is introduced in the Hamiltonian governing the TSS rationalizes these experimental results. Our findings offer new strategies to control magnetic interactions with TSSs and open up viable routes for the realization of the quantum anomalous Hall effect.

Theoretical studies on electronic, magnetic and optical properties of two dimensional transition metal trihalides

Two dimensional transition metal trihalides have drawn attention over the years due to their intrinsic ferromagnetism and associated large anisotropy at nanoscale. The interactions involved in these layered structures are of van der Waals types which are important for exfoliation to different thin samples. This enables one to compare the journey of physical properties from bulk structures to monolayer counterpart. In this topical review, the modulation of electronic, magnetic and optical properties by strain engineering, alloying, doping, defect engineering etc have been discussed extensively. The results obtained by first principle density functional theory calculations are verified by recent experimental observations. The relevant experimental synthesis of different morphological transition metal trihalides are highlighted. The feasibility of such routes may indicate other possible heterostructures. Apart from spintronics based applications, transition metal trihalides are potential candidates in sensing and data storage. Moreover, high thermoelectric figure of merit of chromium trihalides at higher temperatures leads to the possibility of multi-purpose applications. We hope this review will give important directions to further research in transition metal trihalide systems having tunable band gap with reduced dimensionalities.

Tuning the carrier injection barrier of hybrid metal-organic interfaces on rare earth-gold surface compounds

Magnetic hybrid metal-organic interfaces possess a great potential in areas such as organic spintronics and quantum information processing. However, tuning their carrier injection barriers on-demand is fundamental for the implementation in technological devices. We have prepared hybrid metal-organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu₂ surfaces (RE = Gd, Ho and Yb) and studied their growth, electrostatics and electronic structure. CuPc exhibits a long-range commensurability and a vacuum level pinning of the molecular energy levels. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal-organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu₂ and GdAu₂) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu₂).

Noncollinear Magnetic Order in Two-Dimensional NiBr2 Films Grown on Au(111)

Metal halides are a class of layered materials with promising electronic and magnetic properties persisting down to the two-dimensional limit. While most recent studies focused on the trihalide components of this family, the rather unexplored metal dihalides are also van der Waals layered systems with distinctive magnetic properties. Here we show that the dihalide NiBr2 grows epitaxially on a Au(111) substrate and exhibits semiconducting and magnetic behavior starting from a single layer. Through a combination of a low-temperature scanning-tunneling microscopy, low-energy electron diffraction, X-ray photoelectron spectroscopy, and photoemission electron microscopy, we identify two competing layer structures of NiBr2 coexisting at the interface and a stoichiometrically pure layer-by-layer growth beyond. Interestingly, X-ray absorption spectroscopy measurements revealed a magnetically ordered state below 27 K with in-plane magnetic anisotropy and zero-remanence in the single layer of NiBr2/Au(111), which we attribute to a noncollinear magnetic structure. The combination of such two-dimensional magnetic order with the semiconducting behavior down to the 2D limit offers the attractive perspective of using these films as ultrathin crystalline barriers in tunneling junctions and low-dimensional devices.

High-efficient ab initio Bayesian active learning method and applications in prediction of two-dimensional functional materials

Beyond the conventional trial-and-error method, machine learning offers a great opportunity to accelerate the discovery of functional materials, but still often suffers from difficulties such as limited materials data and the unbalanced distribution of target properties. Here, we propose the ab initio Bayesian active learning method that combines active learning and high-throughput ab initio calculations to accelerate the prediction of desired functional materials with ultrahigh efficiency and accuracy. We apply it as an instance to a large family (3119) of two-dimensional hexagonal binary compounds with unbalanced materials properties, and accurately screen out the materials with maximal electric polarization and proper photovoltaic band gaps, respectively, whereas the computational costs are significantly reduced by only calculating a few tenths of the possible candidates in comparison with a random search. This approach shows the enormous advantages for the cases with unbalanced distribution of target properties. It can be readily applied to seek a broad range of advanced materials.

Tuning 2D magnetism in Fe3+XGeTe2 films by element doping

Two-dimensional (2D) ferromagnetic materials have been discovered with tunable magnetism and orbital-driven nodal-line features. Controlling the 2D magnetism in exfoliated nanoflakes via electric/magnetic fields enables a boosted Curie temperature (T_C) or phase transitions. One of the challenges, however, is the realization of high T_C 2D magnets that are tunable, robust and suitable for large scale fabrication. Here, we report molecular-beam epitaxy growth of wafer-scale Fe_3+XGeTe₂ films with T_C above room temperature. By controlling the Fe composition in Fe_3+XGeTe₂, a continuously modulated T_C in a broad range of 185–320 K has been achieved. This widely tunable T_C is attributed to the doped interlayer Fe that provides a 40% enhancement around the optimal composition X = 2. We further fabricated magnetic tunneling junction device arrays that exhibit clear tunneling signals. Our results show an effective and reliable approach, i.e. element doping, to producing robust and tunable ferromagnetism beyond room temperature in a large-scale 2D Fe_3+XGeTe₂ fashion.

Voting Data-Driven Regression Learning for Accelerating Discovery of Advanced Functional Materials and Applications to Two-Dimensional Ferroelectric Materials

Regression machine learning is widely applied to predict various materials. However, insufficient materials data usually leads to poor performance. Here, we develop a new voting data-driven method that could generally improve the performance of the regression learning model for accurately predicting properties of materials. We apply it to investigate a large family (2135) of two-dimensional hexagonal binary compounds focusing on ferroelectric properties and find that the performance of the model for electric polarization is indeed greatly improved, where 38 stable ferroelectrics with out-of-plane polarization including 31 metals and 7 semiconductors are screened out. By unsupervised learning, actionable information such as how the number and orbital radius of valence electrons, ionic polarizability, and electronegativity of constituent atoms affect polarization was extracted. Our voting data-driven method not only reduces the size of materials data for constructing a reliable learning model but also enables one to make precise predictions for targeted functional materials.

Influence of 4f filling on electronic and magnetic properties of rare earth-Au surface compounds

One-atom-thick rare-earth/noble metal (RE-NM) compounds are attractive materials to investigate two-dimensional magnetism, since they are easy to synthesize into a common RE-NM2 structure with high crystal perfection. Here we perform a comparative study of the GdAu2, HoAu2, and YbAu2 monolayer compounds grown on Au(111). We find the same atomic lattice quality and moiré superlattice periodicity in the three cases, but different electronic properties and magnetism. The YbAu2 monolayer reveals the characteristic electronic signatures of a mixed-valence configuration in the Yb atom. In contrast, GdAu2 and HoAu2 show the trivalent character of the rare-earth and ferromagnetic transitions below 22 K. Yet, the GdAu2 monolayer has an in-plane magnetic easy-axis, versus the out-of-plane one in HoAu2. The electronic bands of the two trivalent compounds are very similar, while the divalent YbAu2 monolayer exhibits different band features. In the latter, a strong 4f-5d hybridization is manifested in neatly resolved avoided crossings near the Fermi level. First principles theory points to a residual presence of empty 4f states, explaining the fluctuating valence of Yb in the YbAu2 monolayer.

On-Surface Synthesis of Graphene Nanoribbons on Two-Dimensional Rare Earth-Gold Intermetallic Compounds

Here, we demonstrate two reliable routes for the fabrication of armchair-edge graphene nanoribbons (GNRs) on TbAu₂/Au(111), belonging to a class of two-dimensional ferromagnetic rare earth-gold intermetallic compounds. On-surface synthesis directly on TbAu₂ leads to the formation of GNRs, which are short and interconnected with each other. In contrast, the intercalation approach-on-surface synthesis of GNRs directly on Au(111) followed by rare earth intercalation-yields GNRs on TbAu₂/Au(111), where both the ribbons and TbAu₂ are of high quality comparable with those directly grown on clean Au(111). Besides, the as-grown ribbons retain the same band gap while changing from p-doping to weak n-doping mainly due to a change in the work function of the substrate after the rare earth intercalation. The intercalation approach might also be employed to fabricate other types of GNRs on various rare earth intermetallic compounds, providing platforms to tailor the electronic and magnetic properties of GNRs on magnetic substrates.

Two-Dimensional Rare Earth-Gold Intermetallic Compounds on Au(111) by Surface Alloying

Surface alloying is a straightforward route to control and modify the structure and electronic properties of surfaces. Here, we present a systematic study on the structural and electronic properties of three novel rare earth-based intermetallic compounds, namely, ReAu₂ (Re = Tb, Ho, and Er), on Au(111) via directly depositing rare earth metals onto the hot Au(111) surface. Scanning tunneling microscopy/spectroscopy measurements reveal very similar atomic structures and electronic properties, e.g., electronic states and surface work functions, for all these intermetallic compound systems because of the physical and chemical similarities between these rare earth elements. Further, these electronic properties are periodically modulated by the moiré structures caused by the lattice mismatches between ReAu₂ and Au(111). These periodically modulated surfaces could serve as templates for the self-assembly of nanostructures. In addition, these two-dimensional rare earth-based intermetallic compounds provide platforms to investigate rare earth-related catalysis, magnetisms, etc. in the lower dimensions.

Two-dimensional ferromagnetic superlattices

Mechanically exfoliated two-dimensional ferromagnetic materials (2D FMs) possess long-range ferromagnetic order and topologically nontrivial skyrmions in few layers. However, because of the dimensionality effect, such few-layer systems usually exhibit much lower Curie temperature (T C) compared to their bulk counterparts. It is therefore of great interest to explore effective approaches to enhance their T C, particularly in wafer-scale for practical applications. Here, we report an interfacial proximity-induced high-T C 2D FM Fe3GeTe2 (FGT) via A-type antiferromagnetic material CrSb (CS) which strongly couples to FGT. A superlattice structure of (FGT/CS)n, where n stands for the period of FGT/CS heterostructure, has been successfully produced with sharp interfaces by molecular-beam epitaxy on 2-inch wafers. By performing elemental specific X-ray magnetic circular dichroism (XMCD) measurements, we have unequivocally discovered that T C of 4-layer Fe3GeTe2 can be significantly enhanced from 140 K to 230 K because of the interfacial ferromagnetic coupling. Meanwhile, an inverse proximity effect occurs in the FGT/CS interface, driving the interfacial antiferromagnetic CrSb into a ferrimagnetic state as evidenced by double-switching behavior in hysteresis loops and the XMCD spectra. Density functional theory calculations show that the Fe-Te/Cr-Sb interface is strongly FM coupled and doping of the spin-polarized electrons by the interfacial Cr layer gives rise to the T C enhancement of the Fe3GeTe2 films, in accordance with our XMCD measurements. Strikingly, by introducing rich Fe in a 4-layer FGT/CS superlattice, T C can be further enhanced to near room temperature. Our results provide a feasible approach for enhancing the magnetic order of few-layer 2D FMs in wafer-scale and render opportunities for realizing realistic ultra-thin spintronic devices.

A two-dimensional ErCu2 intermetallic compound on Cu(111) with moiré-pattern-modulated electronic structures

A rare-earth compound on a metal may form a two-dimensional (2D) intermetallic compound whose properties can be further modulated by the underlying substrate periodicity and coupling. Here, we present a combinational and systematic investigation using scanning tunneling microscopy/spectroscopy (STM/STS) and density functional theory (DFT) calculations on erbium (Er) on Cu(111). Experimentally, an intriguing growth mode transition from a branched island to a fractal-like island has been observed depending on whether the deposition process of Er is interrupted for a certain duration: post-deposition effects, such as nucleation and island growth controlled by diffusion, play an essential role in altering the Er island edge and its activity. Upon annealing, the branched Er islands become strands of amorphous surface alloy; in contrast, the fractal-like islands (with additional Er atoms on top) give rise to a monolayer thick 2D ErCu₂ intermetallic compound and display a moiré pattern. Theoretically, using DFT calculations, we found that the characteristic energy states, particularly the state in the unoccupied region around 582-663 meV, of the 2D ErCu₂ intermetallic compound are position-dependent, consistent with STS measurements. The moiré pattern originating from the mismatch of the periodicities of the ErCu₂ layer and the Cu(111) surface was identified to be responsible for the observed periodic modulation on the coupling interaction that affects the electronic structures. Our further DFT calculations on a free-standing ErCu₂ monolayer found it to be a 2D ferromagnet with topological band structures. Our work should stimulate further studies on such 2D rare-earth-based nanostructures and exploration of the use of the tunable electronic structures in such atomically-thin layers.

Discovery of Weyl Nodal Lines in a Single-Layer Ferromagnet

Two-dimensional (2D) materials have attracted great attention and spurred rapid development in both fundamental research and device applications. The search for exotic physical properties, such as magnetic and topological order, in 2D materials could enable the realization of novel quantum devices and is therefore at the forefront of materials science. Here, we report the discovery of twofold degenerate Weyl nodal lines in a 2D ferromagnetic material, a single-layer gadolinium-silver compound, based on combined angle-resolved photoemission spectroscopy measurements and theoretical calculations. These Weyl nodal lines are symmetry protected and thus robust against external perturbations. The coexistence of magnetic and topological order in a 2D material is likely to inform ongoing efforts study the rich physics in 2D topological ferromagnets.

Electronic and magnetic properties of the Fe2N monolayer film tuned by substrate symmetry

The robust bonding between Fe and N atoms has the potential to fabricate a ferromagnetic Fe₂N monolayer of a square lattice independently of the symmetry of the substrate. The electronic and magnetic properties tuned by the symmetry of the substrates are investigated by comparing the results of scanning tunnel microscopy and x-ray absorption spectroscopy/magnetic circular dichroism of the square Fe₂N monolayer on the Cu(1 1 1) substrate with that on the Cu(0 0 1) substrate. A periodic electronic modulation of the Fe₂N monolayer on the Cu(1 1 1) substrate is induced by the stripe superlattice due to the difference of the lattice symmetry between the Fe₂N monolayer and the Cu(1 1 1) substrate. The electronic and magnetic properties of the monolayer are largely affected by the hybridization with the Cu substrate and the Fe magnetic moment is much reduced compared to the monolayer on the Cu(0 0 1) substrate.

Recent Progress in the Fabrication, Properties, and Devices of Heterostructures Based on 2D Materials

With a large number of researches being conducted on two-dimensional (2D) materials, their unique properties in optics, electrics, mechanics, and magnetics have attracted increasing attention. Accordingly, the idea of combining distinct functional 2D materials into heterostructures naturally emerged that provides unprecedented platforms for exploring new physics that are not accessible in a single 2D material or 3D heterostructures. Along with the rapid development of controllable, scalable, and programmed synthesis techniques of high-quality 2D heterostructures, various heterostructure devices with extraordinary performance have been designed and fabricated, including tunneling transistors, photodetectors, and spintronic devices. In this review, we present a summary of the latest progresses in fabrications, properties, and applications of different types of 2D heterostructures, followed by the discussions on present challenges and perspectives of further investigations.

van der Waals Metallic Transition Metal Dichalcogenides

Transition metal dichalcogenides are layered materials which are composed of transition metals and chalcogens of the group VIA in a 1:2 ratio. These layered materials have been extensively investigated over synthesis and optical and electrical properties for several decades. It can be insulators, semiconductors, or metals revealing all types of condensed matter properties from a magnetic lattice distorted to superconducting characteristics. Some of these also feature the topological manner. Instead of covering the semiconducting properties of transition metal dichalcogenides, which have been extensively revisited and reviewed elsewhere, here we present the structures of metallic transition metal dichalcogenides and their synthetic approaches for not only high-quality wafer-scale samples using conventional methods (e.g., chemical vapor transport, chemical vapor deposition) but also local small areas by a modification of the materials using Li intercalation, electron beam irradiation, light illumination, pressures, and strains. Some representative band structures of metallic transition metal dichalcogenides and their strong layer-dependence are reviewed and updated, both in theoretical calculations and experiments. In addition, we discuss the physical properties of metallic transition metal dichalcogenides such as periodic lattice distortion, magnetoresistance, superconductivity, topological insulator, and Weyl semimetal. Approaches to overcome current challenges related to these materials are also proposed.

Lanthanide-Directed Assembly of Interfacial Coordination Architectures-From Complex Networks to Functional Nanosystems

Metallo-supramolecular engineering on surfaces provides a powerful strategy toward low-dimensional coordination architectures with prospects for several application fields. To date, most efforts have relied on transition metal centers, and only recently did we pioneer lanthanide-directed assembly. Coordination spheres and motifs with rare-earth elements generally display distinct properties and structural features. The size of the cations and shielding role of the 4f orbitals induces high coordination numbers, frequently entailing flexible coordination geometries. Following Pearson's hard and soft acid-base theory, lanthanide cations are hard Lewis acids and thus feature strong affinity for nitrile, terpyridine, and carboxylate donor moieties. The prevailing oxidation state is +3, although in certain compounds stable +2 or +4 cations occur. The chemistry of rare-earth elements is currently receiving widespread attention, as they are key ingredients for established and emerging 21st century science and technology with relevance for energy conversion, sensing, catalysis, magnetism, photonics, telecommunications, superconductivity, biomedicine, and quantum engineering. In this Account, we review recent advances toward the design of interfacial supramolecular nanoarchitectures incorporating lanthanide centers. We apply controlled ultrahigh vacuum conditions whereby atomistically clean substrates are prepared and exposed to ultrapure atomic and molecular beams of the chosen sublimable constituents. We focus on direct molecular-level investigations and in situ assembly operative close to equilibrium conditions. Our scanning probe microscopy techniques provide atomistic insights regarding the formation, stability, and manipulability of metal-organic compounds and networks. In order to gain deeper insights into the experimental findings, complementary computational analysis of bond characteristics, electronic properties, and coordination motifs has been performed for several case studies. Exemplary elements under consideration include cerium, gadolinium, dysprosium, and europium. By the use of ditopic molecular linkers equipped with carbonitrile moieties, adaptive coordination spheres are unveiled, yielding vertices with two- to sixfold symmetry. The respective coordination nodes underlie the expression of complex networks, such as semiregular Archimedean tessellations for cerium- or gadolinium-directed assemblies and random-tiling quasicrystalline characteristics for europium. Tunability via constituent stoichiometry regulation is revealed for bimolecular arrangements embedding europium centers, simultaneously connecting to carbonitrile and terypyridine ligands. Ditopic carboxylate linkers yield robust reticular networks based on a lateral coordination number of 8 for either gadolinium or dysprosium complexation, featuring a prevalent ionic nature of the coordination bond. Orthogonal insertion protocols give rise to d-f reticular architectures exploiting macrocyclic tetradentate cobalt complexation and peripheral carbonitrile-gadolinium coordination, respectively. Furthermore, lanthanides may afford metalation of adsorbed free-base tetrapyrrole species and can be engaged for interfacial synthesis of sandwich compounds, thus providing prospects for columnar design of coordination architectures. Finally, direct manipulation experiments achieved lateral displacement of single supramolecules and molecular rotation of sandwich or other molecular units. These findings evidence prospects for advancing molecular machinery components. The presented accomplishements herald further advancements in metallo-supramolecular design on surfaces, with versatile nanosystems and architectures emanating from the flexible coordination spheres. The embedding and systematic rationalization of lanthanide centers in tailored interfacial environments are keys to establishing relations between structure and physicochemical characteristics toward the generation of novel functionalities with technological significance.

Polymerization of Well-Aligned Organic Nanowires on a Ferromagnetic Rare-Earth Surface Alloy

The high reactivity of magnetic substrates toward molecular overlayers has so far inhibited the realization of more sophisticated on-surface reactions, thereby depriving these interfaces of a significant class of chemically tailored organics such as graphene nanoribbons, oligonuclear spin-chains, and metal-organic networks. Here, we present a multitechnique characterization of the polymerization of 4,4″-dibromo-p-terphenyl precursors into ordered poly(p-phenylene) arrays on top of the bimetallic GdAu₂ surface alloy. The activation temperatures for bromine scission and subsequent homocoupling of molecular precursors were followed by temperature-dependent X-ray photoelectron spectroscopy. The structural characterizations of supramolecular and polymeric phases, performed by low-energy electron diffraction and scanning tunneling microscopy, establish an extraordinary degree of order extending into the mesoscale. Taking advantage of the high homogeneity, the electronic structure of the valence band was determined with angle-resolved photoemission spectroscopy. Importantly, the transition of localized molecular orbitals into a highly dispersive π-band, the fingerprint of successful polymerization, was observed while leaving all surface-related bands intact. Moreover, ferromagnetic ordering in the GdAu₂ alloy was demonstrated for all phases by X-ray absorption spectroscopy. The transfer of well-established in situ methods for growing covalently bonded macromolecules with atomic precision onto magnetic rare-earth alloys is an important step toward toward studying and controlling intrinsic carbon- and rare-earth-based magnetism.

Self-texturizing electronic properties of a 2-dimensional GdAu2 layer on Au(111): the role of out-of-plane atomic displacement

Here, we show that the electronic properties of a surface-supported 2-dimensional (2D) layer structure can self-texturize at nanoscale. The local electronic properties are determined by structural relaxation processes through variable adsorption stacking configurations. We demonstrate that the spatially modulated layer-buckling, which arises from the lattice mismatch and the layer/substrate coupling at the GdAu₂/Au(111) interface, is sufficient to locally open an energy gap of ∼0.5 eV at the Fermi level in an otherwise metallic layer. Additionally, this out-of-plane displacement of the Gd atoms patterns the character of the hybridized Gd-d states and shifts the center of mass of the Gd 4f multiplet proportionally to the lattice distortion. These findings demonstrate the close correlation between the electronic properties of the 2D-layer and its planarity. We demonstrate that the resulting template shows different chemical reactivities which may find important applications.

Strain-induced effects in the electronic and spin properties of a monolayer of ferromagnetic GdAg2

We report on the structural, electronic and magnetic properties of a monolayer of GdAg₂, forming a moiré pattern on Ag(111). Combining scanning tunneling microscopy and ab initio spin-polarized calculations, we show that the electronic band structure can be shifted linearly via thermal controlled strain of the intra-layer atomic distance in the range of 1-7%, leading to lateral hetero-structuring. Furthermore, the coupling of the incommensurable GdAg₂ alloy layer to the Ag(111) substrate leads to spatially varying atomic relaxation causing subsurface layer buckling, texturing of the electronic and spin properties, and inhomogeneity of the magnetic anisotropy energy across the layer. These results provide perspectives for control of electronic properties and magnetic ordering in atomically-thin layers.

Growth of Co Nanomagnet Arrays with Enhanced Magnetic Anisotropy

A trigon structure formed by submonolayer gadolinium deposition onto Au(111) is revealed as a robust growth template for Co nanodot arrays. Scanning Tunneling Microscopy and X-Ray Magnetic Circular Dichroism measurements evidence that the Co nanoislands behave as independent magnetic entities with an out-of-plane easy axis of anisotropy and enhanced magnetic anisotropy values, as compared to other self-organized Co nanodot superlattices. The large strain induced by the lattice mismatch at the interface between Co and trigons is discussed as the main reason for the increased magnetic anisotropy of the nanoislands.