Platinum and Other Transition Metal Nanoclusters (Pd, Rh) Stabilized by PAMAM Dendrimer as Excellent Heterogeneous Catalysts: Application to the Methylcyclopentane (MCP) Hydrogenative Isomerization

High-Efficient Electrochemiluminescence of DNA-Au Ag Nanoclusters with Au NPs@Ti3C2 as a Novel Coreaction Accelerator for Ultrasensitive Biosensing

In this work, an ultrasensitive electrochemiluminescence (ECL) biosensor was constructed based on DNA-stabilized Au Ag nanoclusters (DNA-Au Ag NCs) as the efficient luminophore and Au NPs@Ti3C2 as a new coreaction accelerator for determining microRNA-221 (miRNA-221) related to liver cancer. Impressively, DNA-Au Ag NCs were stabilized by the high affinity of the periodic 3C sequence, exhibiting an excellent ECL efficiency of 27% compared with classical BSA-Au Ag NCs (16%). Moreover, the Au NPs@Ti3C2 nanocomposites, as a new coreaction accelerator, were first introduced to accelerate the production of abundant sulfate free radicals (SO4•-) for promoting the ECL efficiency of DNA-Au Ag NCs in the DNA-Au Ag NCs/Au NPs@Ti3C2/S2O82- ternary system due to the energy band of Au NPs@Ti3C2 being well-matched with the frontier orbital of S2O82-. Furthermore, the trace target (miRNA-221) could drive the rolling circle amplification to generate an amount of output DNA with periodic 3C and 10A sequences. Through covalent bonds on the surface of poly A and Au NPs, the distance between the luminophor and the coreaction accelerator could be narrowed to further enhance the detection sensitivity. As a result, the constructed sensor has been applied for the ultrasensitive detection of miRNA-221 with a low detection limit of 50 aM and successfully monitored miRNA-221 in MHCC-97L and HeLa cell lysates. This strategy could be utilized for guiding the synthesis of light-emitting DNA-metal NCs, which has great potential in the construction of ultrasensitive biosensors for the early diagnosis of diseases.

Atomically Precise Platinum Carbonyl Nanoclusters: Synthesis, Total Structure, and Electrochemical Investigation of [Pt27(CO)31]4- Displaying a Defective Structure

The molecular Pt nanocluster [Pt27(CO)31]4- (14-) was obtained by thermal decomposition of [Pt15(CO)30]2- in tetrahydrofuran under a H2 atmosphere. The reaction of 14- with increasing amounts of HBF4·Et2O afforded the previously reported [Pt26(CO)32]2- (32-) and [Pt26(CO)32]- (3-). The new nanocluster 14- was characterized by IR and UV-visible spectroscopy, single-crystal X-ray diffraction, direct-current superconducting quantum interference device magnetometry, cyclic voltammetry, IR spectroelectrochemistry (IR SEC), and electrochemical impedance spectroscopy. The cluster displays a cubic-close-packed Pt27 framework generated by the overlapping of four ABCA layers, composed of 3, 7, 11, and 6 atoms, respectively, that encapsulates a fully interstitial Pt4 tetrahedron. One Pt atom is missing within layer 3, and this defect (vacancy) generates local deformations within layers 2 and 3. These local deformations tend to repair the defect (missing atom) and increase the number of Pt-Pt bonding contacts, minimizing the total energy. The cluster 14- is perfectly diamagnetic and displays a rich electrochemical behavior. Indeed, six different oxidation states have been characterized by IR SEC, unraveling the series of 1n- (n = 3-8) isostructural nanoclusters. Computational studies have been carried out to further support the interpretation of the experimental data.

Cu/Mn catalyzed C-N cross coupling reaction of aryl chlorides and amines promoted by PAMAM dendrimer

A bimetallic catalytic combinations of Mn(OAc)2 and Cu(OAc)2 was found to be significantly effective for the Buchwald type C-N cross coupling of arylchlorides and amines. Reaction is highly influenced in the presence of a promoter Poly(amidoamine) (PAMAM) dendrimer which also possesses the advantages of being stabile, non-toxic, biocompatible, non-immunogenic and acts as soluble support for transition metal complex. Although, Mn is low cost and environmentally benign, but it is not fully exploited due to its low intrinsic catalytic activity. Here, the catalytic potential of Mn was drastically increased in the presence of another metal salt (Cu(OAc)2). In bimetallic composition, Mn significantly influences the activity, selectivity and plays a vital role in catalysis. Herein, we have developed a novel, green and economical procedure for the Buchwald type C-N cross coupling of arylchlorides and amines. Presented coupling method works under aerobic and solvent-free conditions and produces an excellent yield of value-added N-arylated or alkylated products.

An overview of poly (amide-amine) dendrimers functionalized chromatographic separation materials

Chromatography is one of the most important separation techniques in analytical chemistry. In which, the separation materials are the core for good separation results. Poly (amide-amine) dendrimers with regular three-dimensional structure, abundant terminal groups, controllable molecule chains, and unique cavities appear to have a positive impact on chromatographic separation materials. In the past decades, poly (amide-amine) grafted adsorbents and stationary phases have presented high grafting efficiency, controllable surface structure, good dispersion, and wide practical applications. In this review, the prepared poly (amide-amine) functionalized separation materials and their applications are systematically summarized. Functions, significance, structure-actvity relationships and benefits of poly (amide-amine) dendrimers in the proposed separation materials are discussed in detail. And we hope to provide a useful reference for the future development of chromatographic separation materials and inspire new discoveries in the study of poly (amide-amine) functionalized materials.

Heterogeneous Dendrimer-Based Catalysts

The present review compiles the advances in the dendritic catalysis within the last two decades, in particular concerning heterogeneous dendrimer-based catalysts and their and application in various processes, such as hydrogenation, oxidation, cross-coupling reactions, etc. There are considered three main approaches to the synthesis of immobilized heterogeneous dendrimer-based catalysts: (1) impregnation/adsorption on silica or carbon carriers; (2) dendrimer covalent grafting to various supports (silica, polystyrene, carbon nanotubes, porous aromatic frameworks, etc.), which may be performed in a divergent (as a gradual dendron growth on the support) or convergent way (as a grafting of whole dendrimer to the support); and (3) dendrimer cross-linking, using transition metal ions (resulting in coordination polymer networks) or bifunctional organic linkers, whose size, polarity, and rigidity define the properties of the resulted material. Additionally, magnetically separable dendritic catalysts, which can be synthesized using the three above-mentioned approaches, are also considered. Dendritic catalysts, synthesized in such ways, can be stored as powders and be easily separated from the reaction medium by filtration/centrifugation as traditional heterogeneous catalysts, maintaining efficiency as for homogeneous dendritic catalysts.

Fluorescent noble metal nanoclusters for contaminants analysis in food matrix

Recently, food safety issues caused by contaminants have aroused great public concern. The development of innovative and efficient sensing techniques for contaminants detection in food matrix is in urgent demand. As fluorescent nanomaterials, noble metal nanoclusters have attracted much attention because of their ease of synthesis, enhanced catalytic activity and biocompatibility, and most importantly, excellent photoluminescence property that provides promising analytical applications. This review comprehensively introduced the synthesis method of noble metal nanoclusters, and summarized the application of metal nanoclusters as fluorescent sensing materials in the detection of pollutants, including pesticides, heavy metal, mycotoxin, food additives, and other contaminants in food. The detection mechanism of pesticide residues mostly relies on the inhibition of natural enzymes. For heavy metals, the detection mechanism is mainly related to the interaction between metal ions and nanoclusters or ligands. It is evidenced that metal nanoclusters have great potential application in the field of food safety monitoring. Moreover, challenges and future trends of nanoclusters were discussed. We hope that this review can provide insights and directions for the application of nanoclusters in contaminants detection.

Water-Soluble Noble Metal Nanoparticle Catalysts Capped with Small Organic Molecules for Organic Transformations in Water

This article recaps a variety of interesting catalytic studies based on solubilized and freely movable noble metal nanoparticle catalysts employed for organic reactions in either pure water or water-organic biphasic systems. Small organic ligand-capped metal nanoparticles are fundamentally attractive materials due to their enormous potential as a well-defined system that can provide spatial control near active catalytic sites. The nanoparticle catalysts are first grouped based on the synthetic method (direct reduction, phase transfer, and redispersion) and then again based on the type of reaction such as alkene hydrogenation, arene hydrogenation, nitroaromatic reduction, carbon-carbon coupling reactions, etc. The impacts of various ligands on the catalytic activity and selectivity of semi-heterogeneous nanoparticles in water are discussed in detail. The catalytic systems using polymers, dendrimers, and ionic liquids as supporting or protecting materials are excluded from the subject of this review.

A Dendrimer-Based Dual Radiodense Element-Containing Nanoplatform for Targeted Enhanced Tumor Computed Tomography Imaging

The exploration of original computed tomography (CT) imaging contrast agents with enhanced sensitivity and specificity is currently one of the major challenging tasks for precision medicine. Herein, we develop an innovative nanoprobe of dendrimer-stabilized gold nanoparticles (Au DSNs) linked with folic acid (FA) as a targeting ligand and diatrizoic acid (DTA) for specific enhanced tumor CT imaging. In current work, poly(amidoamine) (PAMAM) dendrimers of generation 5 (G5) with amine termini were adopted to entrap Au NPs through a stepwise complexation/reduction method to achieve a higher Au loading than the conventional one-step complexation/reduction method. The prepared [(Au⁰)₁₂₀-G5.NH₂] NPs were sequentially functionalized with diatrizoic acid (DTA), a typical CT contrast agent based on iodine(I), FA through a poly(ethylene glycol) (PEG) spacer, and carboxylated PEG monomethyl ether (mPEG-COOH), ended with complete acetylation of the leftover dendrimer amine termini. The generated Au DSNs-DTA-FA (Au core diameter = 5.9 nm) were thoroughly characterized. Our data reveal that the Au DSNs-DTA-FA containing Au and I dual radiodense elements are stable, display enhanced CT imaging performance, much higher than the single-radiodense elemental material solely based on Au or I, and possess a quite good cytocompatibility. With the demonstrated FA-rendered specific targeting, the developed Au DSNs-DTA-FA can be employed as a highly efficient nanoprobe for targeted enhanced CT imaging of cancer cells and a subcutaneous tumor model. Overall, the created Au DSNs-DTA-FA may be a powerful nanoprobe for specific enhanced CT imaging of various kinds of FA receptor-expressing tumors or biosystems.

Ginkgo biloba leaf polysaccharide stabilized palladium nanoparticles with enhanced peroxidase-like property for the colorimetric detection of glucose

Sensitive glucose detection based on nanoparticles is good for the prevention of illness in our bodies. However, many nanoparticles lack stability and biocompatibility, which restrict their sensitivity to glucose detection. Herein, stable and biocompatible Ginkgo biloba leaf polysaccharide (GBLP) stabilized palladium nanoparticles (Pd n -GBLP NPs) were prepared through a green method where GBLP was used as a reducing and stabilizing agent. The results of Pd n -GBLP NPs characterized by UV-visible spectroscopy (UV-Vis), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectra (XPS) confirmed the successful preparation of Pd n -GBLP NPs. TEM results indicated that the sizes of Pd NPs inside of Pd n -GBLP NPs (n = 41, 68, 91 and 137) were 7.61, 9.62, 11.10 and 13.13 nm, respectively. XPS confirmed the successful reduction of PdCl4 2- into Pd (0). Dynamic light scattering (DLS) results demonstrated the long-term stability of Pd n -GBLP NPs in different buffer solutions. Furthermore, Pd91-GBLP NPs were highly biocompatible after incubation (500 μg mL-1) with HeLa cells for 24 h. More importantly, Pd91-GBLP NPs had peroxidase-like properties and followed a ping-pong mechanism. The catalytic oxidation of substrate 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB) by Pd91-GBLP NPs was used to detect the glucose concentration. This colorimetric method had high selectivity, wide linear range from 2.5 to 700 μM and a low detection limit of 1 μM. This method also showed good accuracy for the detection of glucose concentrations in blood. The established method has great potential in biomedical detection in the future.

Biocompatible Dendrimer-Encapsulated Palladium Nanoparticles for Oxidation of Morin

Development of highly efficient catalysts to expedite the degradation of organic dyes has been drawing great attention. The aggregation of catalysts reduces the accessibility of catalytic centers for organic dyes and therefore decreases their catalytic ability. Herein, we report a facile method to prepare highly biocompatible and stable dendrimer-encapsulated palladium nanoparticles (Pd n -G5MCI NPs), which exhibit high catalytic efficiency for oxidation of morin. The biocompatible dendrimers were prepared via surface modification of G5 polyamidoamine (G5 PAMAM) dendrimers using maleic anhydride and l-cysteine. Then, they were incubated with disodium tetrachloropalladate, followed by reduction using sodium borohydride to generate Pd n -G5MCI NPs. Transmission electron microscopy results demonstrated that palladium nanoparticles (Pd NPs) inside Pd n -G5MCI had small diameters (1.77-2.35 nm) and monodisperse states. Dynamic light scattering results confirmed that Pd n -G5MCI NPs had good dispersion and high stability in water. Furthermore, MTT results demonstrated that Pd n -G5MCI NPs had high biocompatibility. More importantly, Pd n -G5MCI NPs successfully catalyzed the decomposition of H2O2 to the hydroxyl radical (•OH), and the generated •OH quickly oxidized morin. This reaction kinetics followed pseudo-first-order kinetics. Apparent rate constant (k app) is an important criterion for evaluating the catalytic rate. The concentrations of Pd n -G5MCI NPs and H2O2 were positively correlated with k app, whereas the correlation between the concentration of morin and k app was negative. The prepared Pd n -G5MCI NPs have great potential to catalyze the degradation of organic dyes in bio-related systems in the future.

Superlinear Photoluminescence by Ultrafast Laser Pulses in Dielectric Matrices with Metal Nanoclusters

An intense photoluminescence emission was observed from noble metal nanoclusters (Pt, Ag or Au) embedded in sapphire plates, nucleated by MeV ion-implantation and assisted by an annealing process. In particular, the spectral photoluminescence characteristics, such as range and peak emission, were compared to the behavior observed from Pt nanoclusters embedded in a silica matrix and excited by UV irradiation. Correlation between emission energy, nanoclusters size and metal composition were analyzed by using the scaling energy relation EFermi/N1/3 from the spherical Jellium model. The metal nanocluster luminescent spectra were numerically simulated and correctly fitted using the bulk Fermi energy for each metal and a Gaussian nanoclusters size distribution for the samples. Our results suggest protoplasmonics photoluminescence from metal nanoclusters free of surface state or strain effects at the nanoclusters-matrix interface that can influence over their optical properties. These metal nanoclusters present very promising optical features such as bright visible photoluminescence and photostability under strong picosecond laser excitations. Besides superlinear photoluminescence from metal nanoclusters were also observed under UV high power excitation showing a quadratic dependence on the pump power fluence.

Efficient reduction of 4-nitrophenol catalyzed by 4-carbo-methoxypyrrolidone modified PAMAM dendrimer–silver nanocomposites

Ag–PPDNCs prepared with 4-carbomethoxypyrrolidone modified PAMAM showed very high activity in the reduction of 4-nitrophenol.

Polyamidoamine dendrimer-PEG hydrogel and its mechanical property on differentiation of mesenchymal stem cells

BACKGROUND

Biocompatible hydrogel systems with tunable mechanical properties have been reported to influence the behavior and differentiation of mesenchymal stem cells (MSCs).

OBJECTIVE

To develop a functionalized hydrogel system with well-defined chemical structures and tunable mechanical property for regulation of stem cell differentiation.

METHODS

An in situ-forming hydrogel system is developed by crosslinking vinyl sulfone functionalized polyamidoamine (PAMAM) dendrimer and multi-armed thiolated polyethylene glycol (PEG) through a thiol-ene Michael addition in aqueous conditions. The viability and differentiation of MSCs in hydrogels of different stiffness are conducted for 21 days under corresponding induction media.

RESULTS

MSCs are viable in synthesized hydrogels after 48 hours of culture. By varying the concentrations of PAMAM dendrimer and PEG, hydrogels of different gelation time and stiffness are achieved. The MSC differentiation indicates that more osteogenic differentiation is observed in hard gel (5,663 Pa) and more adipogenic differentiation is observed in soft gel (77 Pa) in addition to the differentiation caused by each individual induction media during the process of culture.

CONCLUSIONS

A biocompatible in situ-forming hydrogel system is successfully synthesized. This hydrogel system has shown influences on differentiation of MSCs and may potentially be important in developing therapeutic strategies in medical applications.

A Facile and Scalable Route to the Preparation of Catalytic Membranes with in Situ Synthesized Supramolecular Dendrimer Particle Hosts for Pt(0) Nanoparticles Using a Low-Generation PAMAM Dendrimer (G1-NH2) as Precursor

Since the first reports of Cu dendrimer-encapsulated nanoparticles (DENs) published in 1998, the dendrimer-templating method has become the best and most versatile method for preparing ultrafine metallic and bimetallic nanoparticles (1-3 nm) with well-defined compositions, high catalytic activity, and tunable selectivity. However, DENs have remained for the most part model systems with limited prospects for scale up and integration into high-performance and reusable catalytic modules and systems for industrial-scale applications. Here, we describe a facile and scalable route to the preparation of catalytic polyvinylidene fluoride (PVDF) membranes with in situ synthesized supramolecular dendrimer particles (SDPs) that can serve as hosts and containers for Pt(0) nanoparticles (2-3 nm). These new catalytic membranes were prepared using a reactive encapsulation process similar to that utilized to prepare Pt DENs by addition of a reducing agent (sodium borohydride) to aqueous complexes of Pt(II) + G4-OH/G6-OH polyamidoamine (PAMAM) dendrimers. However, the SDPs (2.4 μm average diameter) of our new mixed matrix PVDF-PAMAM membranes were synthesized in the dope dispersion without purification prior to film casting using (i) a low-generation PAMAM dendrimer (G1-NH₂) as particle precursor and (ii) epichlorohydrin, an inexpensive functional reagent, as cross-linker. In addition, the membrane PAMAM particles contain secondary amine groups (∼1.9 mequiv per gram of dry membrane), which are more basic and thus have higher Pt binding affinity than the tertiary amine groups of the G4-OH and G6-OH PAMAM dendrimers. Proof-of-concept experiments show that our new PVDF-PAMAM-G1-Pt/membranes can serve as highly active and reusable catalysts for the hydrogenation of alkenes and alkynes to the corresponding alkanes using (i) H₂ at room temperature and a pressure of 1 bar and (ii) low catalyst loadings of ∼1.4-1.6 mg of Pt. Using cyclohexene as model substrate, we observed near quantitative conversion to cyclohexane (∼98%). The regeneration studies showed that our new Pt/membrane catalysts are stable and can be reused for five consecutive reaction cycles for a total duration of 120 h including 60 h of heating at 100 °C under vacuum for substrate, product, and solvent removal with no detectable loss of cyclohexene hydrogenation activity. The overall results of our study point to a promising, versatile, and scalable path for the integration of catalytic membranes with in situ synthesized SDP hosts for Pt(0) nanoparticles into high-throughput modules and systems for heterogeneous catalytic hydrogenations, an important class of reactions that are widely utilized in industry to produce pharmaceuticals, agrochemicals, and specialty chemicals.

Engineering nanoporous organic frameworks to stabilize naked Au clusters: a charge modulation approach

A simple charge modulation approach has been developed to stabilize naked Au clusters on a nanoporous conjugated organic network. Through engineering pore walls with regulated charges, the controllable growth of Au nanoclusters has been realized. The resulting supported catalyst exhibits excellent performance in the aerobic oxidation of alcohols.

Synthesis of nickel entities: From highly stable zerovalent nanoclusters to nanowires. Growth control and catalytic behavior

Non-noble metal nanoclusters synthesis is receiving increased attention due to their unique catalytic properties and lower cost. Herein, the synthesis of ligand-free Ni nanoclusters with an average diameter of 0.7 nm corresponding to a structure of 13 atoms is presented; they exhibit a zero-valence state and a high stability toward oxidation and thermal treatment. The nanoclusters formation method consists in the electroreduction of nickel ions inside an ordered mesoporous alumina; also, by increasing the current density, other structures can be obtained reaching to nanowires of 10 nm diameter. A seed-mediated mechanism is proposed to explain the growth to nanowires inside these mesoporous cavities. The size dependence on the catalytic behavior of these entities is illustrated by studying the reduction of methylene blue where the nanoclusters show an outstanding performance.

Highly stable and biocompatible zwitterionic dendrimer-encapsulated palladium nanoparticles that maintain their catalytic activity in bacterial solution

This study offers a method for constructing an artificial enzyme (Pd_n-G5MC), which maintains its catalytic efficiency in bacterial solution.

Structural Characterization of Rh and RhAu Dendrimer-Encapsulated Nanoparticles

We report the structural characterization of 1-2 nm Rh and RhAu alloy dendrimer-encapsulated nanoparticles (DENs) prepared by chemical reduction with NaBH₄. In contrast to previously reported results, in situ and ex situ X-ray absorption spectroscopic experiments indicate that only a fraction of the Rh³⁺ present in the precursors are reduced by NaBH₄. Additional structural analysis of RhAu alloy DENs using extended X-ray absorption fine structure spectroscopy leads to a model in which there is significant segregation of Rh and Au within the nanoparticles. In Rh-rich alloy DENs, Au atoms are segregated on the nanoparticle surface.

Supported Dendrimer-Encapsulated Metal Clusters: Toward Heterogenizing Homogeneous Catalysts

Recyclable catalysts, especially those that display selective reactivity, are vital for the development of sustainable chemical processes. Among available catalyst platforms, heterogeneous catalysts are particularly well-disposed toward separation from the reaction mixture via filtration methods, which renders them readily recyclable. Furthermore, heterogeneous catalysts offer numerous handles-some without homogeneous analogues-for performance and selectivity optimization. These handles include nanoparticle size, pore profile of porous supports, surface ligands and interface with oxide supports, and flow rate through a solid catalyst bed. Despite these available handles, however, conventional heterogeneous catalysts are themselves often structurally heterogeneous compared to homogeneous catalysts, which complicates efforts to optimize and expand the scope of their reactivity and selectivity. Ongoing efforts in our laboratories are aimed to address the above challenge by heterogenizing homogeneous catalysts, which can be defined as the modification of homogeneous catalysts to render them in a separable (solid) phase from the starting materials and products. Specifically, we grow the small nanoclusters in dendrimers, a class of uniform polymers with the connectivity of fractal trees and generally radial symmetry. Thanks to their dense multivalency, shape persistence, and structural uniformity, dendrimers have proven to be versatile scaffolds for the synthesis and stabilization of small nanoclusters. Then these dendrimer-encapsulated metal clusters (DEMCs) are adsorbed onto mesoporous silica. Through this method, we have achieved selective transformations that had been challenging to accomplish in a heterogeneous setting, e.g., π-bond activation and aldol reactions. Extensive investigation into the catalytic systems under reaction conditions allowed us to correlate the structural features (e.g., oxidation states) of the catalysts and their activity. Moreover, we have demonstrated that supported DEMCs are also excellent catalysts for typical heterogeneous reactions, including hydrogenation and alkane isomerization. Critically, these investigations also confirmed that the supported DEMCs are heterogeneous and stable against leaching. Catalysts optimization is achieved through the modulation of various parameters. The clusters are oxidized (e.g., with PhICl₂) or reduced (e.g., with H₂) in situ. Changing the dendrimer properties (e.g., generation, terminal functional groups) is analogous to ligand modification in homogeneous catalysts, which affect both catalytic activity and selectivity. Similarly, pore size of the support is another factor in determining product distribution. In a flow reactor, the flow rate is adjusted to control the residence time of the starting material and intermediates, and thus the final product selectivity. Our approach to heterogeneous catalysis affords various advantages: (1) the catalyst system can tap into the reactivity typical to homogeneous catalysts, which conventional heterogeneous catalysts could not achieve; (2) unlike most homogeneous catalysts with comparable performance, the heterogenized homogeneous catalysts can be recycled; (3) improved activity or selectivity compared to conventional homogeneous catalysts is possible because of uniquely heterogeneous parameters for optimization. In this Account, we will briefly introduce metal clusters and describe the synthesis and characterizations of supported DEMCs. We will present the catalysis studies of supported DEMCs in both the batch and flow modes. Lastly, we will summarize the current state of heterogenizing homogeneous catalysis and provide future directions for this area of research.

Biosynthesized Pd/γ-Al2O3 catalysts for low-temperature 1,3-butadiene hydrogenation: the effect of calcination atmosphere

The effect of pretreatment atmosphere on 1,3-butadiene hydrogenation over biosynthesized Pd/γ-Al₂O₃ catalysts was reported.