Conductive Tungsten Oxide Nanosheets for Highly Efficient Hydrogen Evolution

Conversion of Layered WS2 Crystals into Mixed-Domain Electrochemical Catalysts by Plasma-Assisted Surface Reconstruction

Electrocatalytic water splitting is crucial to generate clean hydrogen fuel, but implementation at an industrial scale remains limited due to dependence on expensive platinum (Pt)-based electrocatalysts. Here, an all-dry process to transform electrochemically inert bulk WS2 into a multidomain electrochemical catalyst that enables scalable and cost-effective implementation of the hydrogen evolution reaction (HER) in water electrolysis is reported. Direct dry transfer of WS2 flakes to a gold thin film deposited on a silicon substrate provides a general platform to produce the working electrodes for HER with tunable charge transfer resistance. By treating the mechanically exfoliated WS2 with sequential Ar-O2 plasma, mixed domains of WS2, WO3, and tungsten oxysulfide form on the surfaces of the flakes, which gives rise to a superior HER with much greater long-term stability and steady-state activity compared to Pt. Using density functional theory, ultraefficient atomic sites formed on the constituent nanodomains are identified, and the quantification of atomic-scale reactivities and resulting HER activities fully support the experimental observations.

Oxygen Vacancies Trigger Rapid Charge Transport Channels at the Engineered Interface of S-Scheme Heterojunction for Boosting Photocatalytic Performance

Although oxygen vacancies (Ovs) have been intensively studied in single semiconductor photocatalysts, exploration of intrinsic mechanisms and in-depth understanding of Ovs in S-scheme heterojunction photocatalysts are still limited. Herein, a novel S-scheme photocatalyst made from WO3-Ov/In2S3 with Ovs at the heterointerface is rationally designed. The microscopic environment and local electronic structure of the S-scheme heterointerface are well optimized by Ovs. Femtosecond transient absorption spectroscopy (fs-TAS) reveals that Ovs trigger additional charge movement routes and therefore increase charge separation efficiency. In addition, Ovs have a synergistic effect on the thermodynamic and kinetic parameters of S-scheme photocatalysts. As a result, the optimal photocatalytic performance is significantly improved, surpassing that of single component WO3-Ov and In2S3 (by 35.5 and 3.9 times, respectively), as well as WO3/In2S3 heterojunction. This work provides new insight into regulating the photogenerated carrier dynamics at the heterointerface and also helps design highly efficient S-scheme photocatalysts.

Oxygen-deficient tungsten oxide inducing electron and proton transfer: Activating ruthenium sites for hydrogen evolution in wide pH and alkaline seawater

The design of electrocatalysts for the hydrogen evolution reaction (HER) that perform effectively across a broad pH spectrum is paramount. The efficiency of hydrogen evolution at ruthenium (Ru) active sites, often hindered by the kinetics of water dissociation in alkaline or neutral conditions, requires further enhancement. Metal oxides, due to superior electron dynamics facilitated by oxygen vacancies (OVS) and shifts in the Fermi level, surpass carbon-based materials. In particular, tungsten oxide (WO3) promotes the directed migration of electrons and protons which significantly activates the Ru sites. Ru/WO3-OV is prepared through a simple hydrothermal and low-temperature annealing process. The prepared catalyst achieves 10 mA cm-2 at overpotentials of 23 mV (1 M KOH), 36 mV (0.5 M H2SO4), 62 mV (1 M PBS), and 38 mV (1 M KOH + seawater). At an overpotential corresponding to 10 mA cm-2 in 1 M KOH and 1 M KOH + seawater, the mass activity of Ru/WO3-OV is about 7.7 and 7.86 times that of 20 wt% Pt/C. The improvement in activity and stability arises from electronic modifications attributed to metal-support interaction. This work offers novel insights for modulating the HER activity of Ru sites across a wide pH range.

Electron Storage in Monolayer Tungstate Nanosheets Produced via a Scalable Exfoliation Method

Inorganic nanosheet materials with atomic thinness have been widely studied as (photo)catalytic materials due to their unique electronic states and surface structures. One scalable and reproducible method of producing monolayer nanosheets is a top-down approach based on the exfoliation of layered parent compounds using an alkylammonium solution as a surfactant. However, H2W2O7 layered tungstates dissolve in basic aqueous solutions, making them unsuitable for the exfoliation process. This work proposes a scalable method to obtain monolayer WO3 nanosheets with a very high external field responsiveness. This work shows that H2W2O7 topochemically swells in a concentrated octylamine (C8N17NH2) aqueous solution with a concentration above the solubility of octylamine in water. Water was added for exfoliation of the liquid crystalline phase into isolated W2O72- nanosheets with octylammonium (C8N17NH3+) protection. Crystalline WO3 nanosheets on the n-Si substrate obtained with calcination exhibited electron richness in the conduction band due to static electron transfer at the interface.

In situ formed nickel tungsten oxide amorphous layer on metal-organic framework derived ZnxNi1-xWO4 surface by self-reconstruction for acid hydrogen evolution reaction

Noble metal free electrocatalysts for hydrogen evolution reaction (HER) in acid play an important role in proton exchange membrane-based electrolysis. Here, we develop an in situ surface self-reconstruction strategy to construct excellent acidic HER catalysts. Firstly, free-standing zinc nickel tungstate nanosheets inlaid with nickel tungsten alloy nanoparticles were synthesized on carbon cloth as pre-catalyst via metal-organic framework derived method. Amorphous nickel tungsten oxide (Ni-W-O) layer is in situ formed on surface of nanosheet as actual HER active site with the dissolution of NiW alloy nanoparticles and the leaching of cations. While the morphology of the free-standing structure remains the same, keeping the maximized exposure of active sites and serving as the electron transportation framework. As a result, benefiting from disordered arrangement of atoms and the synergistic effect between Ni and W atoms, the amorphous Ni-W-O layer exhibits an excellent acidic HER activity with only an overpotential of 46 mV to drive a current density of 10 mA cm-2 and a quite good Tafel slope of 36.4 mV dec-1 as well as an excellent durability. This work enlightens the exploration of surface evolution of catalysts during HER in acidic solution and employs it as a strategy for designing acidic HER catalysts.

Metallic W/WO2 solid-acid catalyst boosts hydrogen evolution reaction in alkaline electrolyte

The lack of available protons severely lowers the activity of alkaline hydrogen evolution reaction process than that in acids, which can be efficiently accelerated by tuning the coverage and chemical environment of protons on catalyst surface. However, the cycling of active sites by proton transfer is largely dependent on the utilization of noble metal catalysts because of the appealing electronic interaction between noble metal atoms and protons. Herein, an all-non-noble W/WO2 metallic heterostructure serving as an efficient solid-acid catalyst exhibits remarkable hydrogen evolution reaction performance with an ultra-low overpotential of -35 mV at -10 mA/cm2 and a small Tafel slope (-34 mV/dec), as well as long-term durability of hydrogen production (>50 h) at current densities of -10 and -50 mA/cm2 in alkaline electrolyte. Multiple in situ and ex situ spectroscopy characterizations combining with first-principle density functional theory calculations discover that a dynamic proton-concentrated surface can be constructed on W/WO2 solid-acid catalyst under ultra-low overpotentials, which enables W/WO2 catalyzing alkaline hydrogen production to follow a kinetically fast Volmer-Tafel pathway with two neighboring protons recombining into a hydrogen molecule. Our strategy of solid-acid catalyst and utilization of multiple spectroscopy characterizations may provide an interesting route for designing advanced all-non-noble catalytic system towards boosting hydrogen evolution reaction performance in alkaline electrolyte.

Electronic Structure Engineering of Pt Species over Pt/WO3 toward Highly Efficient Electrocatalytic Hydrogen Evolution

Pt-based supported materials, a widely used electrocatalyst for hydrogen evolution reaction (HER), often experience unavoidable electron loss, resulting in a mismatching of electronic structure and HER behavior. Here, a Pt/WO3 catalyst consisting of Pt species strongly coupled with defective WO3 polycrystalline nanorods is rationally designed. The electronic structure engineering of Pt sites on WO3 can be systematically regulated, and so that the optimal electron-rich Pt sites on Pt/WO3 -600 present an excellent HER activity with only 8 mV overpotential at 10 mA cm-2 . Particularly, the mass activity reaches 7015 mA mg-1 at the overpotential of 50 mV, up to 26-fold higher than that of the commercial Pt/C. The combination of experimental and theoretical results demonstrates that the O vacancies of WO3 effectively mitigate the tendency of electron transfer from Pt sites to WO3 , so that the d-band center could reach an appropriate level relative to Fermi level, endowing it with a suitableΔ G H ∗ $\Delta {G_{{{\rm{H}}^ * }}}$ . This work identifies the influence of the electronic structure on catalytic activity.

Tailoring a local acid-like microenvironment for efficient neutral hydrogen evolution

Electrochemical hydrogen evolution reaction in neutral media is listed as the most difficult challenges of energy catalysis due to the sluggish kinetics. Herein, the Ir-H_xWO₃ catalyst is readily synthesized and exhibits enhanced performance for neutral hydrogen evolution reaction. H_xWO₃ support is functioned as proton sponge to create a local acid-like microenvironment around Ir metal sites by spontaneous injection of protons to WO₃, as evidenced by spectroscopy and electrochemical analysis. Rationalize revitalized lattice-hydrogen species located in the interface are coupled with H_ad atoms on metallic Ir surfaces via thermodynamically favorable Volmer-Tafel steps, and thereby a fast kinetics. Elaborated Ir-H_xWO₃ demonstrates acid-like activity with a low overpotential of 20 mV at 10 mA cm^-2 and low Tafel slope of 28 mV dec^-1, which are even comparable to those in acidic environment. The concept exemplified in this work offer the possibilities for tailoring local reaction microenvironment to regulate catalytic activity and pathway.

Optimization Methods of Tungsten Oxide-Based Nanostructures as Electrocatalysts for Water Splitting

Electrocatalytic water splitting, as a sustainable, pollution-free and convenient method of hydrogen production, has attracted the attention of researchers. However, due to the high reaction barrier and slow four-electron transfer process, it is necessary to develop and design efficient electrocatalysts to promote electron transfer and improve reaction kinetics. Tungsten oxide-based nanomaterials have received extensive attention due to their great potential in energy-related and environmental catalysis. To maximize the catalytic efficiency of catalysts in practical applications, it is essential to further understand the structure-property relationship of tungsten oxide-based nanomaterials by controlling the surface/interface structure. In this review, recent methods to enhance the catalytic activities of tungsten oxide-based nanomaterials are reviewed, which are classified into four strategies: morphology regulation, phase control, defect engineering, and heterostructure construction. The structure-property relationship of tungsten oxide-based nanomaterials affected by various strategies is discussed with examples. Finally, the development prospects and challenges in tungsten oxide-based nanomaterials are discussed in the conclusion. We believe that this review provides guidance for researchers to develop more promising electrocatalysts for water splitting.

Interstitial Hydrogen Atom to Boost Intrinsic Catalytic Activity of Tungsten Oxide for Hydrogen Evolution Reaction

Tungsten oxide (WO₃ ) is an appealing electrocatalyst for the hydrogen evolution reaction (HER) owing to its cost-effectiveness and structural adjustability. However, the WO₃ electrocatalyst displays undesirable intrinsic activity for the HER, which originates from the strong hydrogen adsorption energy. Herein, for effective defect engineering, a hydrogen atom inserted into the interstitial lattice site of tungsten oxide (H_0.23 WO₃ ) is proposed to enhance the catalytic activity by adjusting the surface electronic structure and weakening the hydrogen adsorption energy. Experimentally, the H_0.23 WO₃ electrocatalyst is successfully prepared on reduced graphene oxide. It exhibits significantly improved electrocatalytic activity for HER, with a low overpotential of 33 mV to drive a current density of 10 mA cm^-2 and ultra-long catalytic stability at high-throughput hydrogen output (200 000 s, 90 mA cm^-2 ) in acidic media. Theoretically, density functional theory calculations indicate that strong interactions between interstitial hydrogen and lattice oxygen lower the electron density distributions of the d-orbitals of the active tungsten (W) centers to weaken the adsorption of hydrogen intermediates on W-sites, thereby sufficiently promoting fast desorption from the catalyst surface. This work enriches defect engineering to modulate the electron structure and provides a new pathway for the rational design of efficient catalysts for HER.

WO3 Nanorods Decorated with Very Small Amount of Pt for Effective Hydrogen Evolution Reaction

The electrochemical hydrogen evolution reaction (HER) is one of the most promising green methods for the efficient production of renewable and sustainable H₂, for which platinum possesses the highest catalytic activity. Cost-effective alternatives can be obtained by reducing the Pt amount and still preserving its activity. The Pt nanoparticle decoration of suitable current collectors can be effectively realized by using transition metal oxide (TMO) nanostructures. Among them, WO₃ nanorods are the most eligible option, thanks to their high stability in acidic environments, and large availability. Herein, a simple and affordable hydrothermal route is used for the synthesis of hexagonal WO₃ nanorods (average length and diameter of 400 and 50 nm, respectively), whose crystal structure is modified after annealing at 400 °C for 60 min, to obtain a mixed hexagonal/monoclinic crystal structure. These nanostructures were investigated as support for the ultra-low-Pt nanoparticles (0.2-1.13 μg/cm²): decoration occurs by drop casting some drops of a Pt nanoparticle aqueous solution and the electrodes were tested for the HER in acidic environment. Pt-decorated WO₃ nanorods were characterized by performing scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Rutherford backscattering spectrometry (RBS), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and chronopotentiometry. HER catalytic activity is studied as a function of the total Pt nanoparticle loading, thus obtaining an outstanding overpotential of 32 mV at 10 mA/cm², a Tafel slope of 31 mV/dec, a turn-over frequency of 5 Hz at -15 mV, and a mass activity of 9 A/mg at 10 mA/cm² for the sample decorated with the highest Pt amount (1.13 μg/cm²). These data show that WO₃ nanorods act as excellent supports for the development of an ultra-low-Pt-amount-based cathode for efficient and low-cost electrochemical HER.

Enhancing Tungsten Oxide Gasochromism with Noble Metal Nanoparticles: The Importance of the Interface

Crystalline tungsten trioxide (WO₃ ) thin films covered by noble metal (gold and platinum) nanoparticles are synthesized via wet chemistry and used as optical sensors for gaseous hydrogen. Sensing performances are strongly influenced by the catalyst used, with platinum (Pt) resulting as best. Surprisingly, it is found that gold (Au) can provide remarkable sensing activity that tuned out to be strongly dependent on the nanoparticle size: devices sensitized with smaller nanoparticles display better H₂ sensing performance. Computational insight based on density functional theory calculations suggested that this can be related to processes occurring specifically at the Au nanoparticle-WO₃ interface (whose extent is in fact dependent on the nanoparticle size), where the hydrogen dissociative adsorption turns out to be possible. While both experiments and calculations single out Pt as better than Au for sensing, the present work reveals how an exquisitely nanoscopic effect can yield unexpected sensing performance for Au on WO₃ , and how these performances can be tuned by controlling the nanoscale features of the system.

Bifunctional g-C3N4/carbon nanotubes/WO3 ternary nanohybrids for photocatalytic energy and environmental applications

Ternary nanohybrids based on mesoporous graphitic carbon nitride (g-C3N4) were synthesized and presented for developing stable and efficient Hydrogen (H2) production system. Based on photocatalytic activity, optimization was performed in three different stages to develop carbon nanotubes (CNTs) and WO3 loaded g-C3N4 (CWG-3). Initially, the effect of exfoliation was investigated, and a maximum specific surface area of 100.77 m2/g was achieved. 2D-2D interface between WO3 and g-C3N4 was targeted and achieved, to construct a highly efficient direct Z-scheme heterojunction. Optimized binary composite holds the enhanced activity of about 2.6 folds of H2 generation rates than the thermally exfoliated g-C3N4. Further, CNT loading towards binary composite in an optimized weight ratio enhances the activity by 6.86 folds than the pristine g-C3N4. Notably, optimized ternary nanohybrid generates 15,918 μmol h-1. g-1cat of molecular H2, under natural solar light irradiation with 5 vol% TEOA as a sacrificial agent. Constructive enhancements deliver remarkable H2 production and dye degradation activities. Results evident that, the same system can be useful for pilot-scale energy generation and other photocatalytic applications as well.

Lithium confinement and dynamics in hexagonal and monoclinic tungsten oxide nanocrystals: a 7Li solid state NMR study

Mixed-valence tungsten bronzes A_xWO₃ (A = alkali metal, NH₄⁺, etc.) are a series of compounds with adaptive structural and compositional features that make them a hot research topic in thermoelectrics, electrochromics, catalysis or energy applications in battery electrodes. The mixed hexagonal lithium ammonium bronze Li_x(NH₄)_yWO₃ is a new member of this structural family whose properties are compared to those of the pure hexagonal tungsten bronze (NH₄)_xWO₃. Surface and structural (nanoconfined) Li⁺ cations were characterized by ⁷Li single pulse excitation and ¹H-⁷Li cross-polarization (CP) NMR experiments. CP build-up curves and two-dimensional heteronuclear correlation solid-state NMR techniques provide information about the spatial connectivity between different proton and Li⁺ species. At 500 °C the bronze structurally transforms from the hexagonal to a monoclinic phase, and defects are formed that are characterized through the Li⁺ environment. ⁷Li exchange spectroscopy (EXSY) NMR experiments provide information about the chemical exchange between the lithium species. The measured ⁷Li T₁ and T₂ relaxation time constants and the T₁/T₂ ratio allow characterizing the local strength of Li⁺ binding.

Reversible hydrogen spillover in Ru-WO3-x enhances hydrogen evolution activity in neutral pH water splitting

Noble metal electrocatalysts (e.g., Pt, Ru, etc.) suffer from sluggish kinetics of water dissociation for the electrochemical reduction of water to molecular hydrogen in alkaline and neutral pH environments. Herein, we found that an integration of Ru nanoparticles (NPs) on oxygen-deficient WO_3-x manifested a 24.0-fold increase in hydrogen evolution reaction (HER) activity compared with commercial Ru/C electrocatalyst in neutral electrolyte. Oxygen-deficient WO_3-x is shown to possess large capacity for storing protons, which could be transferred to the Ru NPs under cathodic potential. This significantly increases the hydrogen coverage on the surface of Ru NPs in HER and thus changes the rate-determining step of HER on Ru from water dissociation to hydrogen recombination.

While water splitting electrolysis offers an appealing means to produce H₂ fuel, catalysts show sluggish reaction rate in neutral media. Here, authors utilize hydrogen spillover from oxygen-deficient tungsten oxides to Ru nanoparticles to boost the neutral-pH H₂ evolution performances.

Patchwork-Structured Heterointerface of 1T-WS2/a-WO3 with Sustained Hydrogen Spillover as a Highly Efficient Hydrogen Evolution Reaction Electrocatalyst

Using tungsten disulfide (WS2) as a hydrogen evolution reaction (HER) electrocatalyst brought on several ways to surpass its intrinsic catalytic activity. This study introduces a nanodomain tungsten oxide (WO3) interface to 1T-WS2, opening a new route for facilitating the transfer of a proton to active sites, thereby enhancing the HER performance. After H2S plasma sulfurization on the W layer to realize nanocrystalline 1T-WS2, subsequent O2 plasma treatment led to the formation of amorphous WO3 (a-WO3), resulting in a patchwork-structured heterointerface of 1T-WS2/a-WO3 (WSO). Addition of a hydrophilic interface (WO3) facilitates the hydrogen spillover effect, which represents the transfer of absorbed protons from a-WO3 to 1T-WS2. Moreover, the faster response of the cathodic current peak (proton insertion) in cyclic voltammetry is confirmed by the higher degree of oxidation. The rationale behind the faster proton insertion is that the introduced a-WO3 works as a proton channel. As a result, WSO-1.2 (the ratio of 1T-WS2 to a-WO3) exhibits a remarkable HER activity in that 1T-WS2 consumes more protons provided by the channel, showing an overpotential of 212 mV at 10 mA/cm2. Density functional theory calculations also show that the WO3 phase gives higher binding energies for initial proton adsorption, while the 1T-WS2 phase shows reduced HER overpotential. This improved catalytic performance demonstrates a novel strategy for water splitting to actively elicit the related reaction via efficient proton transport.

Heterointerface and Defect Dual Engineering in a Superhydrophilic Ni2P/WO2.83 Microsphere for Boosting Alkaline Hydrogen Evolution Reaction at High Current Density

Developing a high-performance electrocatalyst for hydrogen evolution reaction (HER) requires a comprehensive consideration of the three key factors, that is, intrinsic activity, electric conductivity, and active site number. Herein, we report the facile synthesis of a self-supported Ni₂P/WO_2.83 heterointerface microsphere as a highly active and low-cost catalyst for alkaline HER, which has simultaneously addressed these key issues by a joint application of heterointerface construction and defect and architecture engineering strategies. Our density functional theory calculations revealed Ni₂P and WO_2.83 optimized by the interface coupling effect work in concert to improve the intrinsic activity of the catalyst. Importantly, the metalloid Ni₂P in an intimate combination with the oxygen-defect-rich WO_2.83 species endowed the electrocatalyst with high conductivity. Furthermore, the Ni₂P/WO_2.83 electrocatalyst presented a superhydrophilic nanostructure, ensuring abundant active sites and their accessibility. Benefiting from these attributes, the obtained Ni₂P/WO_2.83 heterointerface electrocatalyst exhibited excellent activity along with favorable stability for alkaline HER, especially at high current density, surpassing the most reported non-precious catalysts.

The Sensitivity of Metal Oxide Electrocatalysis to Bulk Hydrogen Intercalation: Hydrogen Evolution on Tungsten Oxide

Metal oxides are attracting increased attention as electrocatalysts owing to their affordability, tunability, and reactivity. However, these materials can undergo significant chemical changes under reaction conditions, presenting challenges for characterization and optimization. Herein, we combine experimental and computational methods to demonstrate that bulk hydrogen intercalation governs the activity of tungsten trioxide (WO₃) toward the hydrogen evolution reaction (HER). In contrast to the focus on surface processes in heterogeneous catalysis, we demonstrate that bulk oxide modification is responsible for experimental HER activity. Density functional theory (DFT) calculations reveal that intercalation enables the HER by altering the acid-base character of surface sites and preventing site blocking by hydration. First-principles microkinetic modeling supports that the experimental HER rates can only be explained by intercalated H_xWO₃, whereas nonintercalated WO₃ does not catalyze the HER. Overall, this work underscores the critical influence of hydrogen intercalation on aqueous cathodic electrocatalysis at metal oxides.

Increasing Oxygen Vacancy of CeO2 Nanocrystals by Ni Doping and reduced Graphene Oxides Decoration towards the Electrocatalytic Hydrogen Evolution

The oxygen vacancy (VO) engineering is proved to be an effective approach for improving the hydrogen evolution reaction (HER) performance of low-cost metal oxides electrocatalysts. Cerium dioxide (CeO2), one of...

Atomically Dispersed Mo Sites Anchored on Multichannel Carbon Nanofibers toward Superior Electrocatalytic Hydrogen Evolution

Developing affordable and efficient electrocatalysts as precious metal alternatives toward the hydrogen evolution reaction (HER) is crucially essential for the substantial progress of sustainable H₂ energy-related technologies. The dual manipulation of coordination chemistry and geometric configuration for single-atom catalysts (SACs) has emerged as a powerful strategy to surmount the thermodynamic and kinetic dilemmas for high-efficiency electrocatalysis. We herein rationally designed N-doped multichannel carbon nanofibers supporting atomically dispersed Mo sites coordinated with C, N, and O triple components (labeled as Mo@NMCNFs hereafter) as a superior HER electrocatalyst. Systematic characterizations revealed that the local coordination microenvironment of Mo is determined to be a Mo-O₁N₁C₂ moiety, which was theoretically probed to be the energetically favorable configuration for H intermediate adsorption by density functional theory calculations. Structurally, the multichannel porous carbon nanofibers with open ends could effectively enlarge the exposure of active sites, facilitate mass diffusion/charge transfer, and accelerate H₂ release, leading to promoted reaction kinetics. Consequently, the optimized Mo@NMCNFs exhibited superior Pt-like HER performance in 0.5 M H₂SO₄ electrolyte with an overpotential of 66 mV at 10 mA cm^-2, a Tafel slope of 48.9 mV dec^-1, and excellent stability, outperforming a vast majority of the previously reported nonprecious HER electrocatalysts. The concept of both geometric and electronic engineering of SACs in this work may provide guidance for the design of high-efficiency molecule-like heterogeneous catalysts for a myriad of energy technologies.

Dual-site electrocatalytic nitrate reduction to ammonia on oxygen vacancy-enriched and Pd-decorated MnO2 nanosheets

Electrocatalytic nitrate reduction (NRR) represents one promising alternative to the Haber-Bosch process for NH₃ production due to the lower reaction energy barrier compared to N₂ reduction and the potential recycling of nitrogen source from nitrate wastewater. The metal oxides with oxygen vacancy (O_v) display high NH₃ selectivities in NRR (NO₂^-/N₂ as side products), but the complexity in O_v enrichment and the inferior hydrogen adsorption on oxides make NRR an inefficient process. Herein, one superior dual-site NRR electrocatalyst that is composed of O_v-enriched MnO₂ nanosheets (MnO₂-O_v) and Pd nanoparticles (deposited on MnO₂) is constructed over the three-dimensional porous nickel foam (Pd-MnO₂-O_v/Ni foam). In a continuous-flow reaction cell, this electrode delivers a NO₃^--N conversion rate of 642 mg N m^-2_electrode h^-1 and a NH₃ selectivity of 87.64% at -0.85 V vs. Ag/AgCl when feeding 22.5 mg L^-1 of NO₃^--N (0.875 mL min^-1), outperforming the Pd/Ni foam (369 mg N m^-2_electrode h^-1, 85.02%) and MnO₂-O_v/Ni foam (118 mg N m^-2_electrode h^-1, 32.25%). Increasing the feeding NO₃^--N concentration and flow rate to 180.0 mg L^-1 and 2.81 mL min^-1 can further lift the conversion rate to 1933 and 1171 mg N m^-2_electrode h^-1, respectively. The combination of experimental characterizations and theoretical calculations reveal that the MnO₂-O_v adsorbs, immobilizes, and activates the NO₃^- and N-intermediates, while the Pd supplies the O_v sites with sufficient adsorbed hydrogen (H*) for both the NRR and O_v refreshment. Our work presents a good example of utilizing dual-site catalysis in the highly selective conversion of NO₃^- to NH₃ that is important for nitrate pollution abatement, nitrogen resource recycling, as well as sustainable NH₃ production.

High shear in situ exfoliation of 2D gallium oxide sheets from centrifugally derived thin films of liquid gallium

A diversity of two-dimensional nanomaterials has recently emerged with recent attention turning to the post-transition metal elements, in particular material derived from liquid metals and eutectic melts below 330 °C where processing is more flexible and in the temperature regime suitable for industry. This has been explored for liquid gallium using an angled vortex fluidic device (VFD) to fabricate ultrathin gallium oxide (Ga₂O₃) sheets under continuous flow conditions. We have established the nanosheets to form highly insulating material and have electrocatalytic activity for hydrogen evolution, with a Tafel slope of 39 mV dec^-1 revealing promoting effects of the surface oxidation (passivation layer).

Magneli-type tungsten oxide nanorods as catalysts for the selective oxidation of organic sulfides

Selective oxidation of thioethers is an important reaction to obtain sulfoxides as synthetic intermediates for applications in the chemical industry, medicinal chemistry and biology or the destruction of warfare agents. The reduced Magneli-type tungsten oxide WO_3-x possesses a unique oxidase-like activity which facilitates the oxidation of thioethers to the corresponding sulfoxides. More than 90% of the model system methylphenylsulfide could be converted to the sulfoxide with a selectivity of 98% at room temperature within 30 minutes, whereas oxidation to the corresponding sulfone was on a time scale of days. The concentration of the catalyst had a significant impact on the reaction rate. Reasonable catalytic effects were also observed for the selective oxidation of various organic sulfides with different substituents. The WO_3-x nanocatalysts could be recycled at least 5 times without decrease in activity. We propose a metal oxide-catalyzed route based on the clean oxidant hydrogen peroxide. Compared to other molecular or enzyme catalysts the WO_3-x system is a more robust redox-nanocatalyst, which is not susceptible to decomposition or denaturation under standard conditions. The unique oxidase-like activity of WO_3-x can be used for a wide range of applications in synthetic, environmental or medicinal chemistry.

Promoting the Phosphidation Process using an Oxygen Vacancy Precursor for Efficient Hydrogen Evolution Reaction

Based on previous works, most of the transition metal phosphides (TMPs) were directly prepared by decomposing NaH₂ PO₂ with the precursors at high temperatures, which resulted in different degrees of phosphidation in the final product. Therefore, it is necessary to design an innovative approach to enhance the degree of phosphidation in the material using crystal defects. Here, oxygen-vacancy iron oxide/iron foam (Ov-Fe₂ O₃ /IF) was firstly prepared by generating oxygen vacancy in situ in an iron foam through heating in vacuum conditions. Subsequently, FeP/IF was formed by phosphating Ov-Fe₂ O₃ /IF. Under the effects of oxygen vacancies, oxygen-vacancy iron oxide could be completely phosphatized to produce more active sites on the surface of the material. This, in turn, could result in a catalyst with exceptional hydrogen evolution activity. Thus, the successful fabrication of FeP/IF demonstrated in this work provides an effective and feasible way for the preparation of other high-efficiency catalysts.

Tungsten Oxide/Reduced Graphene Oxide Aerogel with Low-Content Platinum as High-Performance Electrocatalyst for Hydrogen Evolution Reaction

Designing cost-effective, highly active, and durable platinum (Pt)-based electrocatalysts is a crucial endeavor in electrochemical hydrogen evolution reaction (HER). Herein, the low-content Pt (0.8 wt%)/tungsten oxide/reduced graphene oxide aerogel (LPWGA) electrocatalyst with excellent HER activity and durability is developed by employing a tungsten oxide/reduced graphene oxide aerogel (WGA) obtained from a facile solvothermal process as a support, followed by electrochemical deposition of Pt nanoparticles. The WGA support with abundant oxygen vacancies and hierarchical pores plays the roles of anchoring the Pt nanoparticles, supplying continuous mass transport and electron transfer channels, and modulating the surface electronic state of Pt, which endow the LPWGA with both high HER activity and durability. Even under a low loading of 0.81 μg_Pt cm^-2 , the LPWGA exhibits a high HER activity with an overpotential of 42 mV at 10 mA cm^-2 , an excellent stability under 10000-cycle cyclic voltammetry and 40 h chronopotentiometry at 10 mA cm^-2 , a low Tafel slope (30 mV dec^-1 ), and a high turnover frequency of 29.05 s^-1 at η = 50 mV, which is much superior to the commercial Pt/C and the low-content Pt/reduced graphene oxide aerogel. This work provides a new strategy to design high-performance Pt-based electrocatalysts with greatly reduced use of Pt.

Solution Processing of Topochemically Converted Layered WO3 for Multifunctional Applications

Solution processing of nanomaterials is a promising technique for use in various applications owing to its simplicity and scalability. However, the studies on liquid-phase exfoliation (LPE) of tungsten oxide (WO₃ ) are limited, unlike others, by a lack of commercial availability of bulk WO₃ with layered structures. Herein, a one-step topochemical synthesis approach to obtain bulk layered WO₃ from commercially available layered tungsten disulfide (WS₂ ) by optimizing various parameters like reaction time and temperature is reported. Detailed microscopic and spectroscopic techniques confirmed the conversion process. Further, LPE was carried out on topochemically converted bulk layered WO₃ in 22 different solvents; among the solvents studied, the propan-2-ol/water (1 : 1) co-solvent system appeared to be the best. This indicates that the possible values of surface tension and Hansen solubility parameters for bulk WO₃ could be close to that of the co-solvent system. The obtained WO₃ dispersions in a low-boiling-point solvent enable thin films of various thickness to be fabricated by using spray coating. The obtained thin films were used as active materials in supercapacitors without any conductive additives/binders and exhibited an areal capacitance of 31.7 mF cm^-2 at 5 mV s^-1 . Photo-electrochemical measurements revealed that these thin films can also be used as photoanodes for photo-electrochemical water oxidation.

Gram-scale selective synthesis of WO3-x nanorods and (NH4)xWO3 ammonium tungsten bronzes with tunable plasmonic properties

Localized surface plasmon resonance properties in unconventional materials like metal oxides or chalcogenide semiconductors have been studied for use in signal detection and analysis in biomedicine and photocatalysis. We devised a selective synthesis of the tungsten oxides WO_3-x and (NH₄)_xWO₃ with tunable plasmonic properties. We selectively synthesized WO_3-x nanorods with different aspect ratios and hexagonal tungsten bronzes (NH₄)_xWO₃ as truncated nanocubes starting from ammonium metatungstate (NH₄)₆H₂W₁₂O₄₀·xH₂O. Both particles form from the same nuclei at temperatures >200 °C; monomer concentration and surfactant ratio are essential variables for phase selection. (NH₄)_xWO₃ was the preferred reaction product only for fast heating rates (25 K min^-1), slow stirring speeds (∼150 rpm) and high precursor concentrations. A proton nuclear magnetic resonance (¹H-NMR) spectroscopic study of the reaction mechanism revealed that oleyl oleamide, formed from oleic acid and oleylamine upon heating, is a key factor for the selective formation of WO_3-x nanorods. Since oleic acid and oleylamine are standard surfactants for the wet chemical synthesis of many metal and oxide nanoparticles, the finding that oleyl oleamide acts as a chemically active reagent above 250 °C may have implications for many nanoparticle syntheses. Oriented attachment of polyoxotungstate anions is proposed as a model to rationalize phase selectivity. Magic angle spinning (MAS) ¹H-NMR and powder X-ray diffraction (PXRD) studies of the bronze after annealing under (non)inert conditions revealed an oxidative phase transition. WO_3-x and (NH₄)_xWO₃ show a strong plasmon absorption for near infra-red light between 800 and 3300 nm. The maxima of the plasmon bands shift systematically with the nanocrystal aspect ratio.

Ruthenium nanoparticles supported on S-doped graphene as an efficient HER electrocatalyst

An efficient HER catalyst was prepared by doping graphene and wrapping ruthenium nanoparticles, and its performance is comparable to that of commercial Pt/C.

Molybdenum-tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non-noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum-tungsten bimetallic oxide (CTAB-D-W₄ MoO₃ ) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^-2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^-1 . The excellent electrocatalytic HER performance of CTAB-D-W₄ MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.

Ce-doped CoP nanoparticles embedded in carbon nanotubes as an efficient and durable catalyst for hydrogen evolution

In this work, a cerium doped CoP nanoparticles (NPs) embedded in carbon nanotubes (CNTs) for efficient and durable hydrogen evolution was developed. The detailed preparation process was described as the followings. First, cerium was introduced into ZIF-67 to form Ce-doped ZIF-67 by a joint nucleation method. Then, the Ce-doped Co-CNTs was synthesized by carbonization of Ce-doped ZIF-67. During the process, the Co²⁺ was reduced to form Co NPs and the elegant nanostructure of CNTs was formed by the catalytic effect of Co NPs. Finally, by using Ce-doped Co-CNTs as the precursor, the target catalyst (Ce_0.05-doped CoP CNTs) was obtained through a chemical vapour deposition (CVD) process in the presence of NaH₂PO₂. Results of the transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that the target catalyst maintained the original rhombic dodecahedron morphology of ZIF-67 and the CoP NPs were embedded in CNTs and distributed uniformly throughout the catalyst. In electrochemical measurements, the catalyst showed the best performance for HER in 0.5 M H₂SO₄ solution. The onset potential, Tafel slope, electron transfer resistance (R _ct) and double-layer capacitance (C _dl) of the target catalyst was 49 mV, 78 mV dec^-1, 19.2 Ω and 10.5 mF cm^-2, respectively. Meanwhile, the catalyst yielded a current density of 10 mA cm^-2 merely at an overpotential of 146 mV. Furthermore, it maintained 90% of the original current density in a chronoamperometry measurement and showed no obvious decay even after 2000 cycles scans in a long-term durability test.