Templated Self-Assembly of a PS- Branch-PDMS Bottlebrush Copolymer

Phase Behavior and Conformational Asymmetry near the Comb-to-Bottlebrush Transition in Linear-Brush Block Copolymers

This study explores how conformational asymmetry influences the bulk phase behavior of linear-brush block copolymers. We synthesized 60 diblock copolymers composed of poly(trifluoroethyl methacrylate) as the linear block and poly[oligo(ethylene glycol) methyl ether methacrylate] as the brush block, varying the molecular weight, composition, and side-chain length to introduce different degrees of conformational asymmetry. Using small-angle X-ray scattering, we determined the morphology and phase diagrams for three different side-chain length systems, mainly observing lamellar and cylindrical phases. Increasing the side-chain length of the brush block from three to nine ethylene oxide units introduces sufficient asymmetry between the blocks to alter the phase behavior, shifting the lamellar-to-cylindrical transitions toward lower brush block compositions and transitioning the brush block from the dense comb-like regime to the bottlebrush regime. Coarse-grained simulations support our experimental observations and provide a mapping between the composition and conformational asymmetry. A comparison of our findings to strong stretching theory across multiple phase boundary predictions confirms the transition between the dense comb-like regime and the bottlebrush regime.

Nonorthogonal Cascade Catalysis in Multicompartment Micelles

Multicompartment micelles (MCMs) containing acid and base sites in discrete domains are prepared from poly(norbornene)-based amphiphilic bottlebrush copolymers in aqueous media. The acid and base sites are localized in different compartments of the micelle, enabling the nonorthogonal reaction sequence: deacetalization - Knoevenagel condensation - Michael addition of acetals to 2-amino chromene derivatives. Computational simulations using dissipative particle dynamics (DPD) elucidated the bottlebrush composition required to effectively site-isolate the nonorthogonal catalysts. This contribution presents MCMs as a new class of nanostructures for one-pot multistep nonorthogonal cascade catalysis, laying the groundwork for the isolation of three or more incompatible catalysts to synthesize value-added compounds in a single reaction vessel, in water.

Pendant Group Modifications Provide Graft Copolymer Silicones with Exceptionally Broad Thermomechanical Properties

Graft copolymers offer a versatile platform for the design of self-assembling materials; however, simple strategies for precisely and independently controlling the thermomechanical and morphological properties of graft copolymers remain elusive. Here, using a library of 92 polynorbornene-graft-polydimethylsiloxane (PDMS) copolymers, we discover a versatile backbone-pendant sequence-control strategy that addresses this challenge. Small structural variations of pendant groups, e.g., cyclohexyl versus n-hexyl, of small-molecule comonomers have dramatic impacts on order-to-disorder transitions, glass transitions, mechanical properties, and morphologies of statistical and block silicone-based graft copolymers, providing an exceptionally broad palette of designable materials properties. For example, statistical graft copolymers with high PDMS volume fractions yielded unbridged body-centered cubic morphologies that behaved as soft plastic crystals. By contrast, lamellae-forming graft copolymers provided robust, yet reprocessable silicone thermoplastics (TPs) with transition temperatures spanning over 160 °C and elastic moduli as high as 150 MPa despite being both unentangled and un-cross-linked. Altogether, this study reveals a new pendant-group-mediated self-assembly strategy that simplifies graft copolymer synthesis and enables access to a diverse family of silicone-based materials, setting the stage for the broader development of self-assembling materials with tailored performance specifications.

Experimental and Computational Evaluation of Self-Assembled Morphologies in Diblock Janus Bottlebrush Copolymers

Diblock Janus-type "A-branch-B" bottlebrush copolymers (di-JBBCPs) consist of a backbone with alternating A and B side chains, in contrast to the side chain arrangement of conventional bottlebrush copolymers. As a result, A and B blocks of di-JBBCPs can microphase-separate perpendicular to the backbone, which is located at the interface between the two blocks. A reparametrized dissipative particle dynamics (DPD) model is used to theoretically investigate the self-assembly of di-JBBCPs and to compare with the experimental results of a range of polystyrene-branch-polydimethylsiloxane di-JBBCPs. The experimentally formed cylinder, gyroid, and lamellar morphologies showed good correspondence with the model phase diagram, and the effect of changing volume fraction and backbone length is revealed. The DPD model predicts a bulk-stable perforated lamella morphology together with two unconventional spherical phases, the Frank-Kasper A15 spheres and the hexagonally close-packed spheres, indicating the diversity of morphologies available from complex BCP molecular architectures.

Catalytically Active Multicompartment Micelles

This article presents the self-assembly behavior of multicompartment micelles (MCMs) in water into morphologies with multiple segregated domains and their use as supports for aqueous catalysis. A library of poly(norbornene)-based amphiphilic bottlebrush copolymers containing covalently attached l-proline in the hydrophobic, styrene, and pentafluorostyrene domains and a poly(ethylene glycol)-containing repeat unit as the hydrophilic block have been synthesized using ring-opening metathesis polymerization. Interaction parameter (χ) values between amphiphilic blocks were determined using a Flory-Huggins-based computational model. The morphologies of the MCMs are observed via cryogenic transmission electron microscopy and modeled using dissipative particle dynamic simulations. The catalytic activities of these MCM nanoreactors were systematically investigated using the aldol addition between 4-nitrobenzaldehyde and cyclohexanone in water as a model reaction. MCMs present an ideal environment for catalysis by providing control over water content and enhancing interactions between the catalytic sites and the aldehyde substrate, thereby forming the aldol product in high yields and selectivities that is otherwise not possible under aqueous conditions. Catalyst location, block ratio, and functionality have substantial influences on micelle morphology and, ultimately, catalytic efficiency. "Clover-like" and "core-shell" micelle morphologies displayed the best catalytic activity. Our MCM-based catalytic system expands the application of these nanostructures beyond selective storage of guest molecules and demonstrates the importance of micelle morphology on catalytic activity.

Visualizing the Orientation of Single Polymers Induced by Spin-Coating

The orientation of chains within polymeric materials influences their electrical, mechanical, and thermal properties. While many techniques can infer the orientation distribution of a bulk ensemble, it is challenging to determine this information at the single-chain level, particularly in an environment of otherwise identical polymers. Here, we use single-molecule localization microscopy (SMLM) to visualize the directions of chains within spin-coated polymer films. We find a strong relationship between shear force and the degree and direction of orientation, and additionally, we reveal the effects of chain length and solvent evaporation rate. This work utilizes single-chain resolution to observe the important, though often overlooked, property of chain orientation in the common fabrication process of spin-coating.

Solvent-assisted self-assembly of block copolymer thin films

Solvent-assisted block copolymer self-assembly is a compelling method for processing and advancing practical applications of these materials due to the exceptional level of the control of BCP morphology and significant acceleration of ordering kinetics. Despite substantial experimental and theoretical efforts devoted to understanding of solvent-assisted BCP film ordering, the development of a universal BCP patterning protocol remains elusive; possibly due to a multitude of factors which dictate the self-assembly scenario. The aim of this review is to aggregate both seminal reports and the latest progress in solvent-assisted directed self-assembly and to provide the reader with theoretical background, including the outline of BCP ordering thermodynamics and kinetics phenomena. We also indicate significant BCP research areas and emerging high-tech applications where solvent-assisted processing might play a dominant role.

Selective sequential infiltration synthesis of ZnO in the liquid crystalline phase of silicon-containing rod-coil block copolymers

The combination of block copolymer (BCP) thin film self-assembly and selective infiltration synthesis of inorganic materials into one BCP block provides access to various organic-inorganic hybrids. Here, we apply sequential infiltration synthesis, a vapor-phase hybridization technique, to selectively introduce ZnO into the organic microdomains of silicon-containing rod-coil diblock copolymers and a triblock terpolymer, polydimethylsiloxane (PDMS)-b-poly{2,5-bis[(4-methoxyphenyl)-oxycarbonyl]styrene} (PDMS-b-PMPCS) and PDMS-b-polystyrene-b-PMPCS (PDMS-b-PS-b-PMPCS), in which the PMPCS rod block is a liquid crystalline polymer. The in-plane cylindrical PDMS-b-PMPCS and core-shell cylindrical and hexagonally perforated lamellar PDMS-b-PS-b-PMPCS films were infiltrated with ZnO with high selectivity to the PMPCS. The etching contrast between PDMS, PS and the ZnO-infused PMPCS enables the fabrication of ZnO/SiO_x binary composites by plasma etching and reveals the core-shell morphology of the triblock terpolymer.

Effect of Molecular Architecture on the Self-Assembly of Bottlebrush Copolymers

The characteristics of a new architecture of bottlebrush copolymers (BBCPs) self-assembly were studied using self-consistent field theory. In this molecule, a series of AB linear diblock side chains were connected at the diblock junction using a C backbone. The control over the linker length and its chemical nature created an additional constraint on the intrinsic AB diblock microphase separation. Increasing side-chain crowding by increasing the grafting density and total degree of polymerization induced improved phase separation. This was reflected in the overall reduction in the effective interaction parameter between the diblocks as well as the abrupt increase in phase density when crossing the order-disorder transition. Side-chain crowding resulted in an increase in the equilibrium domain spacing compared to a linear diblock. On the other hand, the localization of block C at the AB interface generated a diffuse domain boundary and reduction in side-chain stretching. The unique behavior of BBCPs was observed in 1D confined systems where the molecule showed the natural tendency to orient domains parallel to neutral confinement in contrast to the behavior of confined diblocks. Such behavior largely depended on the degree of incompatibility between the AB blocks and BBCP structure. A ternary phase diagram was constructed for different proportions of each block. Rich morphologies of core-shell domains and tiling patterns were observed including octagonal and pentagonal polygons. The unique architecture of this bottlebrush molecule and its improved nanoscale properties make it an attractive candidate for various applications of nanotechnology.

The influence of side-chain conformations on the phase behavior of bottlebrush block polymers

A self-consistent field theory based on the wormlike chain model is implemented in the investigation of the self-assembly behavior of bottlebrush block polymers in the formation of a lamellar phase. We utilize the model in which the semi-flexible side chains of two types A and B are grafted at the semi-flexible backbone of type C to mimic the bottlebrush molecule, particularly allowing for the extended chain conformation due to the high grafting density. We examine the positional and orientational probability distribution for the segments along the backbone and side chains as a function of the grafting density and chain flexibility for all blocks, covering a broad regime spanning from the flexible chain to rigid rod chain. This reveals that the persistence length of side chains λ_SC which intrinsically tunes the chain conformation of bottlebrush polymers plays a pivotal role in determining the manner of the local monomer packing in microphase segregation. As an important adjustable factor, λ_SC has a remarkable impact on the backbone extension and then realizes the effective manipulation of the characteristic structural size of self-assembled microstructures, such as the domain spacing and the interfacial width.

Design, Synthesis, and Self-Assembly of Janus Bottlebrush Polymers

Janus bottlebrush polymers are a class of special molecular brushes, which have two immiscible side chains on the repeating unit of the backbone. The characteristic architectures of Janus bottlebrush polymers enable unique self-assembly properties and broad applications. Recently, remarkable advances of Janus bottlebrush polymers have been achieved for polymer chemistry and material science. This review summarizes the synthetic strategies of Janus bottlebrush polymers, and highlights the self-assembly applications. Finally, the challenges and opportunities are proposed for the further development.

Kinetically-arrested single-polymer nanostructures from amphiphilic mikto-grafted bottlebrushes in solution: a simulation study

Solution self-assembly of molecular bottlebrushes offers a rich platform to create complex functional organic nanostructures. Recently, it has become evident that kinetics, not just thermodynamics, plays an important role in defining the self-assembled structures that can be formed. In this work, we present results from extensive molecular dynamics simulations that explore the self-assembly behavior of mikto-grafted bottlebrushes when the solvent quality for one of the side blocks is changed by a rapid quench. We have performed a systematic study of the effect of different structural parameters and the degree of incompatibility between side chains on the final self-assembled nanostructures in the low concentration limit. We found that kinetically-trapped complex nanostructures are prevalent as the number of macromonomers increases. We performed a quantitative analysis of the self-assembled morphologies by computing the radius of gyration tensor and relative shape anisotropy as the different relevant parameters were varied. Our results are summarized in terms of non-equilibrium morphology diagrams.

Vertical Lamellae Formed by Two-Step Annealing of a Rod-Coil Liquid Crystalline Block Copolymer Thin Film

Silicon-containing block copolymer thin films with high interaction parameter and etch contrast are ideal candidates to generate robust nanotemplates for advanced nanofabrication, but they typically form in-plane oriented microdomains as a result of the dissimilar surface energies of the blocks. Here, we describe a two-step annealing method to produce vertically aligned lamellar structures in thin film of a silicon-containing rod-coil thermotropic liquid crystalline block copolymer. The rod-coil block copolymer with the volume fraction of the Si-containing block of 0.22 presents an asymmetrical lamellar structure in which the rod block forms a hexatic columnar nematic liquid crystalline phase. A solvent vapor annealing step first produces well-ordered in-plane cylinders of the Si-containing block, then a subsequent thermal annealing promotes the phase transition from in-plane cylinders to vertical lamellae. The pathways of the order-order transition were examined by microscopy and in situ using grazing incidence small-angle X-ray scattering and wide-angle X-ray scattering.

Perpendicularly aligned nanodomains on versatile substrates via rapid thermal annealing assisted by liquid crystalline ordering in block copolymer films

The highly ordered perpendicularly aligned cylindrical and lamellar microdomains within block copolymer (BCP) films have important applications in diverse fields. However, the fast normal orientation of self-assembled nanostructures on arbitrary substrates without tedious pre- and postprocessing has been a challenging issue in manufacturing miniaturized devices. Here, we outline the potential for extending the hierarchical self-assembly within azobenzene-containing PS-b-PMA(Az) films to inherently assist in the formation of normally aligned domains using a rapid thermal annealing process (140 °C for 5 min). Liquid crystalline (LC) mesogens in PS-b-PMA(Az) films self-assemble to form a parallelly aligned sematic phase after thermal annealing, as confirmed by grazing-incidence small-angle X-ray scattering (GISAXS), wide-angle X-ray diffraction (WAXD) and ultraviolet-visible (UV-vis) spectra. This sub-phase contributes to broadening of the PS-cylinder-phase window (0.083 ≤ f PS < 0.49) and ∼12 nm PS cylinder structures. Perpendicular cylinders or lamellae are observed on various substrates, such as silicon wafers, flexible polyethylene terephthalate (PET) sheets and conductive aluminum foils. Additionally, the good reactive ion etching (RIE) rate difference between the two blocks makes these BCPs more attractive for advancing the field of BCP lithographic applications for fabricating flexible microelectronic devices.

Commensurability-Driven Orientation Control during Block Copolymer Directed Self-Assembly

In this study, the orientation of block copolymer (BCP) patterns in topographical templates is controlled using a simple template design rule. The orientation of the pattern is selected by using a template with one commensurate dimension and one incommensurate dimension. An array of binary states of a BCP pattern can be programmed into a desired layout by tuning of the template wall thickness.

Self-assembly of amphiphilic polymers of varying architectures near attractive surfaces

We use coarse-grained molecular dynamics simulations to investigate the assembly of A-B amphiphilic polymers near/on surfaces as a function of polymer architecture and surface attraction to the solvophobic B-block in the polymer. We study four polymer architectures: linear, bottlebrush with a backbone that is longer than each of the side chains, bottlebrush where the solvophobic backbone is similar in length to each of the side chains, and 'star-like' architectures where the backbone is significantly shorter than the side chain lengths. For each architecture and surface-B attraction, we quantify the assembled aggregate structure (i.e., aggregation number, domain shapes and sizes) and the chain conformations (i.e., components of the chain radius of gyration) on and away from the surface. For all the architectures and surface-B attraction strengths, the assembled structure away from the surface is similar to the assembly observed in bulk systems without surfaces. Near/on the surface, the assembled B-blocks form domains whose shapes and sizes are dependent on the surface-B attraction strength and the ability of the B-block in the polymer architecture to change conformations and pack on the surface. Domain sizes formed from linear and 'star-like' polymer architectures show the highest sensitivity to surface-B-block attraction strength, transitioning from hemispherical to disordered domains with increasing attraction strength. In contrast, bottlebrushes with long backbones and short side chains transition from hemispherical to striped to continuous domains with increasing surface-B attraction strength. Bottlebrushes with similar solvophobic backbone and side chain lengths form hemispherical domains that do not change significantly with the surface-B-block attraction strength. These computational results can guide experimentalists in their choices of surface chemistry and polymer architecture to achieve desired assembled domain shapes and sizes on the surface.

Tailored silyl ether monomers enable backbone-degradable polynorbornene-based linear, bottlebrush and star copolymers through ROMP

Ring-opening metathesis polymerization of norbornene-based (macro)monomers is a powerful approach for the synthesis of macromolecules with diverse compositions and complex architectures. Nevertheless, a fundamental limitation of polymers prepared by this strategy is their lack of facile degradability, limiting their utility in a range of applications. Here we describe a class of readily available bifunctional silyl ether-based cyclic olefins that copolymerize efficiently with norbornene-based (macro)monomers to provide copolymers with backbone degradability under mildly acidic aqueous conditions and degradation rates that can be tuned over several orders of magnitude, depending on the silyl ether substituents. These monomers can be used to manipulate the in vivo biodistribution and clearance rate of polyethylene glycol-based bottlebrush polymers, as well as to synthesize linear, bottlebrush and brush-arm star copolymers with degradable segments. We expect that this work will enable preparation of degradable polymers by ROMP for biomedical applications, responsive self-assembly and improved sustainability.

Length effects of cylindrical polymer brushes on their in vitro and in vivo properties

Understanding the relationship between the morphology and biological performance of nanomaterials is very important for their biomedical applications. However, most of the published research focused on spherical systems. The biological properties of the anisotropic nanomaterials have not been studied enough. In this study, we synthesized three sets of cylindrical polymer brushes (CPBs) with different lengths (∼34, 60 and 119 nm) by taking advantage of controlled radical polymerization and Cu(i)-catalyzed alkyne-azide click chemistry. These CPBs had one-dimensional wormlike morphology, the same chemical structure and diameter, desirable water solubility, abundant amino groups and narrowly distributed lengths. These characteristics encouraged us to study length effects on their in vitro and in vivo properties. We demonstrated that longer CPBs had higher cellular uptake, lower tissue permeability, shorter blood circulation time, lower tumor accumulation and rapider body clearance than their shorter counterparts. This work might provide important guidance for the design of biomedical nanomaterials.

Tuning Cooperative Assembly with Bottlebrush Block Co-polymers for Porous Metal Oxide Films Using Solvent Mixtures

Block copolymer templating enables the generation of well-defined pore sizes and geometries in a wide variety of frameworks, typically through evaporation-induced self-assembly (EISA). Here, we systematically modulate the solvent quality with mixtures of tetrahydrofuran-ethanol (THF-EtOH) to manipulate the unimer/micelle ratio in the precursor solution to explore how the associated solution structure influences the final pore morphology. A bottlebrush block copolymer (BBCP) with poly(ethylene oxide) and poly(t-butyl acrylate) side chains was used as the template for pore formation. Irrespective of the solvent composition, a bimodal pore size distribution was obtained with mesopores templated by small aggregates of the BBCP unimers (potentially low aggregation number micelles) and macropores templated by large self-assembled BBCP micelles. The morphology and pore characteristics of the metal oxide films were dependent on the THF-EtOH composition. Interestingly, an intermediate solvent composition where the volume of micelles is approximately half the volume of unimers (in the precursor solution) leads to the best ordering of micelle-templated pores and also the maximum porosity in the films. The micelle/unimer ratios in the precursor solutions do not correspond directly to the bimodal pore distribution in the metal oxide films, which we attribute to kinetically trapped assembly of the BBCP at a low THF content. The increased critical micelle concentration at high THF composition leads to changes in the unimer/micelle ratio during solvent evaporation. These results appear to be universal for a number of metal oxides (cobalt, magnesium, and zinc) with the porosity maximized at a THF/EtOH ratio of 3:1. These results suggest the potential for enhancements in the porosity of block copolymer-templated films by EISA methods through judicious solvent selection.

Core-Shell and Zigzag Nanostructures from a Thin Film Silicon-Containing Conformationally Asymmetric Triblock Terpolymer

The self-assembly of multiblock copolymers generates diverse hierarchical nanostructures and greatly extends the range of microdomain geometries beyond those produced by diblock copolymers. We report the synthesis of a conformationally asymmetric ABC triblock terpolymer in which the end blocks are a mesogen-jacketed liquid crystalline polymer and poly(dimethylsiloxane), respectively, and its self-assembly under mixed solvent vapor annealing forms a range of sphere, cylinder, and perforated lamellar core-shell morphologies, as well as stacked multilevel structures. Sub-7 nm diameter SiO_x nanopatterns were generated by selective plasma etching of the small volume fraction Si-containing core block giving a line/space ratio of ∼1:4. Moreover, the conformational asymmetry of this terpolymer leads to zigzag cylinders on a flat substrate and stable cylinder alignment transverse to template sidewalls within lithographically patterned trenches.

Grubbs' and Schrock's Catalysts, Ring Opening Metathesis Polymerization and Molecular Brushes-Synthesis, Characterization, Properties and Applications

In this review, molecular brushes and other macromolecular architectures bearing a bottlebrush segment where the main chain is synthesized by ring opening metathesis polymerization (ROMP) mediated by Mo or Ru metal complexes are considered. A brief review of metathesis and ROMP is presented in order to understand the problems and the solutions provided through the years. The synthetic strategies towards bottlebrush copolymers are demonstrated and each one discussed separately. The initiators/catalysts for the synthesis of the backbone with ROMP are discussed. Syntheses of molecular brushes are presented. The most interesting properties of the bottlebrushes are detailed. Finally, the applications studied by different groups are presented.

Microphase separation of carbohydrate-based star-block copolymers with sub-10 nm periodicity

Star-block copolymers consisting of polycaprolactone and maltotriose segments with three, four, and six arms were synthesized to achieve sub-10 nm microphase-separated structures.

Brush-First and ROMP-Out with Functional (Macro)monomers: Method Development, Structural Investigations, and Applications of an Expanded Brush-Arm Star Polymer Platform

The efficient synthesis of complex functional polymeric nanomaterials is often challenging. Ru-initiated ring-opening metathesis polymerization (ROMP) of multivalent macromonomers followed by cross-linking to form brush-arm star (BASP) polymers enables access to well-defined nano-structures with diverse functionality. This "brush-first" method leaves active Ru in the BASP microgel core, which could potentially be used in a subsequent "ROMP-out" (RO) step to introduce further modifications to the BASP structure via the addition of (macro)monomers. Here, we study this RO approach in depth. The efficiency of RO is assessed for a variety of BASP compositions using a combination of inductively coupled plasma mass spectrometry and gel permeation chromatography. To demonstrate the modularity of the RO process, arylboronic acid-functionalized BASPs were prepared; uptake of these RO-BASPs into hypersialylated cancer cells was enhanced relative to non-functionalized BASPs as determined by flow cytometry and fluorescence microscopy. In addition, the self-assembly of miktoarm BASPs prepared via brush-first and RO with different macromonomers is demonstrated. The combination of brush-first ROMP with RO provides a simple, modular strategy for access to a wide array of functional nanomaterials.