Enhanced Two-Photon Photochromism in Metasurface Perfect Absorbers

Origami metamaterials for ultra-wideband and large-depth reflection modulation

The dynamic control of electromagnetic waves is a persistent pursuit in modern industrial development. The state-of-the-art dynamic devices suffer from limitations such as narrow bandwidth, limited modulation range, and expensive features. To address these issues, we fuse origami techniques with metamaterial design to achieve ultra-wideband and large-depth reflection modulation. Through a folding process, our proposed metamaterial achieves over 10-dB modulation depth over 4.96 - 38.8 GHz, with a fractional bandwidth of 155% and tolerance to incident angles and polarizations. Its ultra-wideband and large-depth reflection modulation performance is verified through experiments and analyzed through multipole decomposition theory. To enhance its practical applicability, transparent conductive films are introduced to the metamaterial, achieving high optical transparency (>87%) from visible to near-infrared light while maintaining cost-effectiveness. Benefiting from lightweight, foldability, and low-cost properties, our design shows promise for extensive satellite communication and optical window mobile communication management.

Characterizations for the photothermal effect of Rhodamine 6G using white-light interferometry and windowed Fourier transform

Photothermal phenomenon is one of the natural responses in light-matter interactions in which the energy of the incident light is converted into heat, resulting in a temperature increase in the illuminated material. This effect has a direct influence on the refractive index of the material such that its change of spectral dependency with temperature can be exploited for different applications. However, it is also important to separate/identify the thermal effect from the optical/electronic resonance effect to expand potential applications of light-matter interactions. In this work, we demonstrate the use of a white-light interferometry approach combined with a windowed Fourier transform method and a consistency-checking peak-fitting method to obtain the refractive index of an Rh6G-ethanol dye solution with a sensitivity of about ∼10^-6 (RIU) for the visible range. Moreover, we also perform both static and dynamic measurements to study the photothermal effect of the Rh6G solution under external excitation. Importantly, we separate the optical and thermal effects due to the external excitation and obtain very good agreement with the experimental results by modeling the relative refractive index of the Rh6G solution with an expression consisting of spectrally a Fano-like resonance term and a linear dependent thermal term. We find that the response due to the optical effect is about ∼0.2 × 10^-3 of that due to the thermal effect in the low-light regime. Our approach to separating the optical and thermal effects could shed light on other fields for potential applications through precision measurements of the transmission phase or refractive index.

Nanoparticle-on-Mirror Metamaterials for Full-Spectrum Selective Solar Energy Harvesting

Most broadband metamaterial absorbers are realized by patterning periodic arrays of plasmonic nanoparticles (>100 nm) on dielectric/metallic substrates to enable both electric and magnetic resonances. These metamaterials, however, require costly nanolithographic top-down techniques for fabrication. Here, we demonstrate new-concept nanoparticle-on-mirror (NoM) metamaterial absorbers by densely packing plasmonic nanoparticles of much smaller size (∼30 nm) on metal films directly. Such a simple but rational design enables the use of all-solution-based bottom-up processes. Because of the decoupling of electric and magnetic polarizations in these ultrasmall nanoparticles, excellent impedance match and near-perfect light absorption can be achieved in a broad band over the solar spectrum with weak thermal emission. Proof-of-concept large-area NoM metamaterial absorbers that offer a solar absorptance of 94% but a low IR emittance of 2% are experimentally demonstrated. The outstanding performance, bottom-up process, and great compatibility render the design promising for efficient and large-scale solar energy harvesting.

Reversible Three-Color Fluorescence Switching of an Organic Molecule in the Solid State via "Pump-Trigger" Optical Manipulation

In photoswitches that undergo fluorescence switching upon ultraviolet irradiation, photoluminescence and photoisomerization often occur simultaneously, leading to unstable fluorescence properties. Here, we successfully demonstrated reversible solid-state triple fluorescence switching through "Pump-Trigger" multiphoton manipulation. A novel fluorescence photoswitch, BOSA-SP, achieved green, yellow, and red fluorescence under excitation by pump light and isomerization induced by trigger light. The energy ranges of photoexcitation and photoisomerization did not overlap, enabling appropriate selection of the multiphoton light for "pump" and "trigger" photoswitching, respectively. Additionally, the large free volume of the spiropyran (SP) moiety in the solid state promoted reversible photoisomerization. Switching between "pump" and "trigger" light is useful for three-color tunable switching cell imaging, which can be exploited in programmable fluorescence switching. Furthermore, we exploited reversible dual-fluorescence switching in a single molecular system to successfully achieve two-color super-resolution imaging.

Photochromic switching of narrow-band lattice resonances

Narrow-band resonances supported by a variety of periodic metallic or dielectric nanostructures have great potential applications in light sources, optical sensors, and switches or modulators. Here we report the switching of narrow-band lattice resonances in a mirror-backed two-dimensional array of dielectric nanopillars. The nanopillar is composed of a silica core and photochromic coating. By exposure to ultraviolet light, the photochromic molecules can be turned into a state that is highly absorptive around the wavelength of the lattice resonance. Because the lattice resonance has enhanced the near-fields concentrated on the tops of dielectric nanopillars, the absorptive coating can destroy this resonance. The absorptive state of the photochromic molecules can be recovered to a transparent state by exposure to visible light. We fabricate the device and characterize the change of reflection spectra to demonstrate the reversible switching of lattice resonances by exposure to ultraviolet and visible light alternately. An all-optical control of the narrow-band photoluminescence is further demonstrated by combining a fluorescent dye with the photochromic molecules.

Enhanced Multiphoton Processes in Perovskite Metasurfaces

Multiphoton absorption and luminescence are fundamentally important nonlinear processes for utilizing efficient light-matter interaction. Resonant enhancement of nonlinear processes has been demonstrated for many nanostructures; however, it is believed that all higher-order processes are always much weaker than their corresponding linear processes. Here, we study multiphoton luminescence from structured surfaces and, combining multiple advantages of perovskites with the concept of metasurfaces, we demonstrate that the efficiency of nonlinear multiphoton processes can become comparable to the efficiency of the linear process. We reveal that the perovskite metasurface can enhance substantially two-photon stimulated emission with the threshold being comparable with that of the one-photon process. Our modeling of free-carrier dynamics and exciton recombination upon nonlinear photoexcitation uncovers that this effect can be attributed to the local field enhancement in structured media, a substantial increase of the mode overlap, and the selection rules of two-photon absorption in perovskites.

Tunable Split-Disk Metamaterial Absorber for Sensing Application

We present four designs of tunable split-disk metamaterial (SDM) absorbers. They consist of a bottom gold (Au) mirror layer anchored on Si substrate and a suspended-top SDM nanostructure with one, two, three, and four splits named SDM-1, SDM-2, SDM-3, and SDM-4, respectively. By tailoring the geometrical configurations, the four SDMs exhibit different tunable absorption resonances spanning from 1.5 µm to 5.0 µm wavelength range. The resonances of absorption spectra can be tuned in the range of 320 nm, and the absorption intensities become lower by increasing the gaps of the air insulator layer. To increase the sensitivity of the proposed devices, SDMs exhibit high sensitivities of 3312 nm/RIU (refractive index unit, RIU), 3362 nm/RIU, 3342 nm/RIU, and 3567 nm/RIU for SDM-1, SDM-2, SDM-3, and SDM-4, respectively. The highest correlation coefficient is 0.99999. This study paves the way to the possibility of optical gas sensors and biosensors with high sensitivity.

Improved photothermal therapy of brain cancer cells and photogeneration of reactive oxygen species by biotin conjugated gold photoactive nanoparticles

Herein, we report on the design and development of functionalized acrylic polymeric nanoparticles with Spiropyrans (SPs) and imidazole moieties via superficial polymerizations. Then, Au³⁺ ions were immobilized and reduced on their surface to obtain photoresponsive gold-decorated polymer nanoparticles(Au-NPs). The synthesized Au-NPs were surface adapted with biotin as specific targeting tumor penetration cells and enhance the intercellular uptake through the endocytosis. FT-IR (Fourier-transform Infrared Spectroscopy), UV-Vis (Ultra Violet-Visible Spectrophotometer), EDS (Energy Dispersive X-Ray Spectroscopy), SEM (Scanning Electron Microscope) and HR-TEM (High-resolution transmission electron microscopy) descriptions were engaged to illustrate their spectral analysis and morphological examinations of Bt@Au-NPs. Fluorescence microscopy images of cellular uptake descriptions and ICP-MS (Inductively coupled plasma mass spectrometry) investigation established the cell lines labeling ability and enhanced targetting efficacy of biotin-conjugated Au-NPs (Bt@Au-NPs) toward C6 glioma cells (brain cancer cells) with 72.5% cellular uptake relative to 30.2% for non-conjugated lone. These were further established through intracellular ROS examinations and in vitro cytotoxicity investigation on the C6 glioma cell line. The solid surface plasmon absorptions of the Au-NPs and Bt@Au-NPs providing raised photothermal therapy under UV irradiation. The synthesized multifunctional Bt@Au-NPs with an inclusive combination of potential resources presented encouraging nanoprobe with targeting capability, improved photodynamic and photothermal cancer therapy.

Two-photon absorption and two-photon-induced isomerization of azobenzene compounds

The process of two-photon-induced isomerization occurring in various organic molecules, among which azobenzene derivatives hold a prominent position, offers a wide range of functionalities, which can be used in both material and life sciences. This review provides a comprehensive description of nonlinear optical (NLO) properties of azobenzene (AB) derivatives whose geometries can be switched through two-photon absorption (TPA). Employing the nonlinear excitation process allows for deeper penetration of light into the tissues and provides opportunities to regulate biological systems in a non-invasive manner. At the same time, the tight focus of the beam needed to induce nonlinear absorption helps to improve the spatial resolution of the photoinduced structures. Since near-infrared (NIR) wavelengths are employed, the lower photon energies compared to usual one-photon excitation (typically, the azobenzene geometry change from trans to cis form requires the use of UV photons) cause less damage to the biological samples. Herein, we present an overview of the strategies for optimizing azobenzene-based photoswitches for efficient two-photon excitation (TPE) and the potential applications of two-photon-induced isomerization of azobenzenes in biological systems: control of ion flow in ion channels or control of drug release, as well as in materials science, to fabricate data storage media, optical filters, diffraction elements etc., based on phenomena like photoinduced anisotropy, mass transport and phase transition. The extant challenges in the field of two-photon switchable azomolecules are discussed.

Metasurface Color Filters Using Aluminum and Lithium Niobate Configurations

Two designs of metasurface color filters (MCFs) using aluminum and lithium niobate (LN) configurations are proposed and numerically studied. They are denoted as tunable aluminum metasurface (TAM) and tunable LN metasurface (TLNM), respectively. The configurations of MCFs are composed of suspended metasurfaces above aluminum mirror layers to form a Fabry-Perot (F-P) resonator. The resonances of TAM and TLNM are red-shifted with tuning ranges of 100 nm and 111 nm, respectively, by changing the gap between the bottom mirror layer and top metasurface. Furthermore, the proposed devices exhibit perfect absorption with ultra-narrow bandwidth spanning the whole visible spectral range by composing the corresponding geometrical parameters. To increase the flexibility and applicability of proposed devices, TAM exhibits high sensitivity of 481.5 nm/RIU and TLNM exhibits high figure-of-merit (FOM) of 97.5 when the devices are exposed in surrounding environment with different refraction indexes. The adoption of LN-based metasurface can enhance FWHM and FOM values as 10-fold and 7-fold compared to those of Al-based metasurface, which greatly improves the optical performance and exhibits great potential in sensing applications. These proposed designs provide an effective approach for tunable high-efficiency color filters and sensors by using LN-based metamaterial.

A Tunable Polymer-Metal Based Anti-Reflective Metasurface

Anti-reflective surfaces are of great interest for optical devices, sensing, photovoltaics, and photocatalysis. However, most of the anti-reflective surfaces lack in situ tunability of the extinction with respect to wavelength. This communication demonstrates a tunable anti-reflective surface based on colloidal particles comprising a metal core with an electrochromic polymer shell. Random deposition of these particles on a reflective surface results in a decrease in the reflectance of up to 99.8% at the localized surface plasmon resonance frequency. This narrow band feature can be tuned by varying the pH or by application of an electric potential, resulting in wavelength shifts of up to 30 nm. Electrophoretic particle deposition is shown to be an efficient method for controlling the interparticle distance and thereby further optimizing the overall efficiency of the anti-reflective metasurface.

Phase transition of spiropyrans: impact of isomerization dynamics at high temperatures

Isomerization behaviors of spiropyran derivatives in neat condensed phase were studied to understand their unusual phase transitions including cold-crystallization after extreme supercooling down to -50 °C. Compounds with different functional groups were compared, and the equilibrium between isomers at high temperatures was found to determine phase transitions.

The influence of gold nanoparticles on the two photon absorption of photochromic molecular systems

In this study, we investigate the influence of gold nanoparticles on the nonlinear optical properties of the dihydroazulene/vinylheptafulvene photo- and thermochromic system.