Controlling the Trajectories of Nano/Micro Particles Using Light-Actuated Marangoni Flow

Moving Meniscus-Assisted Template-Free Optothermofluidic Nanoparticle Patterning and Its Application in Optothermoconvective Particle Trapping

Moving meniscus-assisted vertical lifting is a commonly employed particle assembly technique to realize large-area particle patterning for the easy fabrication of colloidal photonic crystals and sensors. Though great success has been achieved for large-area patterning, inscribing desired patterns over the target substrate with precise control over the morphology remains a challenge. The target substrates need to be functionalized (physically or chemically) to realize desired patterns, which increases the complexity and limits their applicability to specific particle-liquid combinations. We demonstrate a new approach for the precise patterning of gold nanoparticles (Au NPs, diameter ∼60 nm) over solid substrates by the synergy of light-induced Marangoni flow and vertical lifting process (moving meniscus), without the requirement of photomasks or templates. The core idea relies on the particle accumulation due to light-induced Marangoni flow near the liquid meniscus in contact with a solid surface (due to plasmonic absorption of the particles) and the controlled lifting of the substrate. We present both the simulation and experimental results of the developed patterning technique. Various patterns such as continuous lines, intermittent lines with varying lengths, patterns with continuously varying widths, cross patterns, etc. are successfully inscribed. Dynamic control over the three-dimensional morphology of the deposited patterns is achieved by varying the lifting velocity, laser irradiation time, and lifting direction during the inscription process. Finally, we show the applicability of the developed plasmonically active surface for the large-area parallel manipulation of nonabsorbing microparticles based on optothermoconvective flow. The major advantage of the developed method compared to the existing light-controlled patterning techniques is its ability to inscribe patterns over large distances (up to several centimeters). We expect that the results presented in this paper will benefit different applications requiring precise particle patterning, such as optical elements, sensors, plasmonic substrates, microfluidic master templates, and electronic circuits.

Optothermal Microparticle Oscillator Induced by Marangoni and Thermal Convection

The light-fueled microparticle oscillator, exemplifying sustained driving in a static light source, potentially holds applications in fundamental physics, cellular manipulation, fluid dynamics, and various other soft-matter systems. The challenges of photodamage due to laser focusing on particles and the control of the oscillation direction have always been two major issues for microparticle oscillators. Here, we present an optical-thermal method for achieving a 3D microparticle oscillator with a fixed direction by employing laser heating of the gold film surface. First, the microparticle oscillation without direction limitation is studied. The photothermal conversion originates from the laser heating of a gold film. The oscillation mechanism is the coordination of the forces exerted on the particles, including the thermal convective force, thermophoresis force, and gravity. Subsequently, the additional Marangoni convection force, generated by the temperature gradient on the surface of a microbubble, is utilized to control the oscillation direction of the microparticle. Finally, a dual-channel oscillation mode is achieved by utilizing two microbubbles. During the oscillation process, the microparticle is influenced by flow field forces and temperature gradient force, completely avoiding optical damage to the oscillating microparticle.

Dynamic Manipulation of Droplets on Liquid-Infused Surfaces Using Photoresponsive Surfactant

Fast and programmable transport of droplets on a substrate is desirable in microfluidic, thermal, biomedical, and energy devices. Photoresponsive surfactants are promising candidates to manipulate droplet motion due to their ability to modify interfacial tension and generate "photo-Marangoni" flow under light stimuli. Previous works have demonstrated photo-Marangoni droplet migration in liquid media; however, migration on other substrates, including solid and liquid-infused surfaces (LIS), remains an outstanding challenge. Moreover, models of photo-Marangoni migration are still needed to identify optimal photoswitches and assess the feasibility of new applications. In this work, we demonstrate 2D droplet motion on liquid surfaces and on LIS, as well as rectilinear motion in solid capillary tubes. We synthesize photoswitches based on spiropyran and merocyanine, capable of tension changes of up to 5.5 mN/m across time scales as short as 1.7 s. A millimeter-sized droplet migrates at up to 5.5 mm/s on a liquid, and 0.25 mm/s on LIS. We observe an optimal droplet size for fast migration, which we explain by developing a scaling model. The model also predicts that faster migration is enabled by surfactants that maximize the ratio between the tension change and the photoswitching time. To better understand migration on LIS, we visualize the droplet flow using tracer particles, and we develop corresponding numerical simulations, finding reasonable agreement. The methods and insights demonstrated in this study enable advances for manipulation of droplets for microfluidic, thermal and water harvesting devices.

Optical Manipulation Heats up: Present and Future of Optothermal Manipulation

Optothermal manipulation is a versatile technique that combines optical and thermal forces to control synthetic micro-/nanoparticles and biological entities. This emerging technique overcomes the limitations of traditional optical tweezers, including high laser power, photon and thermal damage to fragile objects, and the requirement of refractive-index contrast between target objects and the surrounding solvents. In this perspective, we discuss how the rich opto-thermo-fluidic multiphysics leads to a variety of working mechanisms and modes of optothermal manipulation in both liquid and solid media, underpinning a broad range of applications in biology, nanotechnology, and robotics. Moreover, we highlight current experimental and modeling challenges in the pursuit of optothermal manipulation and propose future directions and solutions to the challenges.

Light-Induced Surface Tension Gradients for Hierarchical Assembly of Particles from Liquid Metals

Achieving control over the motion of dissolved particles in liquid metals is of importance for the meticulous realization of hierarchical particle assemblies in a variety of nanofabrication processes. Brownian forces can impede the motion of such particles, impacting the degree of perfection that can be realized in assembled structures. Here, we show that light-induced Marangoni flow in liquid metals (i.e., liquid-gallium) with Laguerre-Gaussian (LGpl) lasers as heating sources is an effective approach to overcome Brownian forces on particles, giving rise to predictable assemblies with a high degree of order. We show that by carefully engineering surface tension gradients in liquid-gallium using non-Gaussian LGpl lasers, the Marangoni and convective flow that develops in the fluid drives the trajectory of randomly dispersed particles to assemble into 100 μm wide ring-shaped particle assemblies. Careful control over the parameters of the LGpl laser (i.e., laser mode, spot size, and intensity of the electric field) can tune the temperature and fluid dynamics of the liquid-gallium as well as the balance of forces on the particle. This in turn can tune the structure of the ring-shaped particle assembly with a high degree of fidelity. The use of light to control the motion of particles in liquid metals represents a tunable and rapidly reconfigurable approach to spatially design surface tension gradients in fluids for more complex assembly of particles and small-scale solutes. This work can be extended to a variety of liquid metals, complementary to what has been realized in particle assembly out of ferrofluids using magnetic fields.

Collective Behaviors of Active Matter Learning from Natural Taxes Across Scales

Taxis orientation is common in microorganisms, and it provides feasible strategies to operate active colloids as small-scale robots. Collective taxes involve numerous units that collectively perform taxis motion, whereby the collective cooperation between individuals enables the group to perform efficiently, adaptively, and robustly. Hence, analyzing and designing collectives is crucial for developing and advancing microswarm toward practical or clinical applications. In this review, natural taxis behaviors are categorized and synthetic microrobotic collectives are discussed as bio-inspired realizations, aiming at closing the gap between taxis strategies of living creatures and those of functional active microswarms. As collective behaviors emerge within a group, the global taxis to external stimuli guides the group to conduct overall tasks, whereas the local taxis between individuals induces synchronization and global patterns. By encoding the local orientations and programming the global stimuli, various paradigms can be introduced for coordinating and controlling such collective microrobots, from the viewpoints of fundamental science and practical applications. Therefore, by discussing the key points and difficulties associated with collective taxes of different paradigms, this review potentially offers insights into mimicking natural collective behaviors and constructing intelligent microrobotic systems for on-demand control and preassigned tasks.

Spatial programming of self-organizing chemical systems using sustained physicochemical gradients from reaction, diffusion and hydrodynamics

Living organisms employ chemical self-organization to build structures, and inspire new strategies to design synthetic systems that spontaneously take a particular form, via a combination of integrated chemical reactions, assembly pathways and physicochemical processes. However, spatial programmability that is required to direct such self-organization is a challenge to control. Thermodynamic equilibrium typically brings about a homogeneous solution, or equilibrium structures such as supramolecular complexes and crystals. This perspective addresses out-of-equilibrium gradients that can be driven by coupling chemical reaction, diffusion and hydrodynamics, and provide spatial differentiation in the self-organization of molecular, ionic or colloidal building blocks in solution. These physicochemical gradients are required to (1) direct the organization from the starting conditions (e.g. a homogeneous solution), and (2) sustain the organization, to prevent it from decaying towards thermodynamic equilibrium. We highlight four different concepts that can be used as a design principle to establish such self-organization, using chemical reactions as a driving force to sustain the gradient and, ultimately, program the characteristics of the gradient: (1) reaction-diffusion coupling; (2) reaction-convection; (3) the Marangoni effect and (4) diffusiophoresis. Furthermore, we outline their potential as attractive pathways to translate chemical reactions and molecular/colloidal assembly into organization of patterns in solution, (dynamic) self-assembled architectures and collectively moving swarms at the micro-, meso- and macroscale, exemplified by recent demonstrations in the literature.

Motile behaviour of droplets in lipid systems

Motility is the capacity for living organisms to move autonomously and with purpose, and is essential to life. The transition from abiotic chemistry into motile cellular compartments has yet to be understood, but motile behaviour likely followed chemical evolution because primeval cell survival depended on scouting for resources effectively. Minimalistic motile systems provide an experimental framework to delineate the emergence mechanisms of such an evolutionary asset. In this Review, we discuss frontier developments in controlling the movement of droplets in lipid systems, in particular, chemotactic behaviours driven by fluctuations in interfacial tension, because of its simple mechanism and prebiotic relevance. Although most efforts have focused on designing oil droplet motility in lipid-rich aqueous solutions, we highlight that water droplets can also move in lipid-enriched oils. First, we describe how droplets evolve chemotactic motility in lipid systems. Next, we review how these oil droplets can adapt their movement to illumination conditions. Finally, we discuss examples where chemical reactivity brings complexity to motility. This work contributes to systems chemistry, where chemical reactions combined with physicochemical phenomena can yield new functions, such that a limited set of molecules can promote complex movement at larger functional scales by following the rules of molecular chemistry.

Depinning of Multiphase Fluid Using Light and Photo-Responsive Surfactants

The development of noninvasive and robust strategies for manipulation of droplets and bubbles is crucial in applications such as boiling and condensation, electrocatalysis, and microfluidics. In this work, we realize the swift departure of droplets and bubbles from solid substrates by introducing photoresponsive surfactants and applying asymmetric illumination, thereby inducing a "photo-Marangoni" lift force. Experiments show that a pinned toluene droplet can depart the substrate in only 0.38 s upon illumination, and the volume of an air bubble at departure is reduced by 20%, indicating significantly faster departure. These benefits can be achieved with moderate light intensities and dilute surfactant concentrations, without specially fabricated substrates, which greatly facilitates practical applications. Simulations suggest that the net departure force includes contributions from viscous stresses directly caused by the Marangoni flow, as well as from pressure buildup due to flow stagnation at the contact line. The manipulation scheme proposed here shows potential for applications requiring droplet and bubble removal from working surfaces.

Heat-Mediated Optical Manipulation

Progress in optical manipulation has stimulated remarkable advances in a wide range of fields, including materials science, robotics, medical engineering, and nanotechnology. This Review focuses on an emerging class of optical manipulation techniques, termed heat-mediated optical manipulation. In comparison to conventional optical tweezers that rely on a tightly focused laser beam to trap objects, heat-mediated optical manipulation techniques exploit tailorable optothermo-matter interactions and rich mass transport dynamics to enable versatile control of matter of various compositions, shapes, and sizes. In addition to conventional tweezing, more distinct manipulation modes, including optothermal pulling, nudging, rotating, swimming, oscillating, and walking, have been demonstrated to enhance the functionalities using simple and low-power optics. We start with an introduction to basic physics involved in heat-mediated optical manipulation, highlighting major working mechanisms underpinning a variety of manipulation techniques. Next, we categorize the heat-mediated optical manipulation techniques based on different working mechanisms and discuss working modes, capabilities, and applications for each technique. We conclude this Review with our outlook on current challenges and future opportunities in this rapidly evolving field of heat-mediated optical manipulation.

Influence of Polarity Change and Photophysical Effects on Photosurfactant-Driven Wetting

Photosurfactants have shown considerable promise for enabling stimuli-responsive control of the properties and motion of fluid interfaces. Recently, a number of photoswitch chemistries have emerged to tailor the photoresponsive properties of photosurfactants. However, systematic studies investigating how photoresponsive surfactant behavior depends on the photochemical and photophysical properties of the switch remain scarce. In this work, we develop synthetic schemes and surfactant designs to produce a well-controlled library of photosurfactants to comparatively assess the behavior of photoswitch chemistry on interfacial behavior. We employ photoinduced spreading of droplets at fluid interfaces as a model for such studies. We show that although photosurfactant response is largely guided by expected trends with changes in polarity of the photoswitch, interfacial behavior also depends nontrivially and sometimes counter-intuitively on the kinetics and mechanisms of photoswitching, particularly at the interface of two solvents, as well as on complex interactions with other surfactants. Understanding these complexities enables the design of new photosurfactant systems and their optimization toward responsive functions including triggered spreading, dewetting, and destabilization of droplets on solid and fluid surfaces.

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

Light-induced manipulation of passive and active microparticles

We consider sedimented at a solid wall particles that are immersed in water containing small additives of photosensitive ionic surfactants. It is shown that illumination with an appropriate wavelength, a beam intensity profile, shape and size could lead to a variety of dynamic, both unsteady and steady state, configurations of particles. These dynamic, well-controlled and switchable particle patterns at the wall are due to an emerging diffusio-osmotic flow that takes its origin in the adjacent to the wall electrostatic diffuse layer, where the concentration gradients of surfactant are induced by light. The conventional nonporous particles are passive and can move only with already generated flow. However, porous colloids actively participate themselves in the flow generation mechanism at the wall, which also sets their interactions that can be very long ranged. This light-induced diffusio-osmosis opens novel avenues to manipulate colloidal particles and assemble them to various patterns. We show in particular how to create and split optically the confined regions of particles of tunable size and shape, where well-controlled flow-induced forces on the colloids could result in their crystalline packing, formation of dilute lattices of well-separated particles, and other states.

Synthesis and surface activity of photoresponsive hybrid surfactants containing both fluorocarbon and hydrocarbon chains

HYPOTHESIS

Hybrid surfactants containing both alkyl and fluoroalkyl chains within the same molecule where modification of the azobenzene group will enable us to switch the superhydrophobic nature with an external light source, and the optical behavior will vary depending on the structure of the hydrophobic chains.

EXPERIMENTS

Surface activity and its optically-induced variation of the azobenzene-modified hybrid surfactants were characterized using the surface tensiometry, UV-vis and NMR spectroscopy and theoretical calculation.

FINDINGS

The hybrid surfactants are superhydrophobic in nature reducing the surface tension of water to near 20 mN/m. Photo-isomerization of the azobenzene group induces a drastic surface tension variation (Δγ), and particularly the compositions containing the octyl-fluorocarbon chain exhibit remarkable Δγ as much as 30 mN/m which is even higher than that of the conventional surfactants (Δγ ≈ 14-20 mN/m). Theoretical calculation suggests significantly higher hydrophilicity of the cis isomer, causing the drastic switch in the surface activity. These results indicate the promise of the hybrid surfactants as efficient surface/interface manipulators.

Nanoparticles as suitable messengers for molecular communication

Molecular communication (MoCo) is a new paradigm of bio-inspired communication in which the transport of information occurs through information particles instead of electromagnetic waves. Herein, the enormous potential of nanoparticles in this field is highlighted. The MoCo concept has been extensively modelled both theoretically and computationally within the scientific community, mainly in the field of engineering. We collected the most relevant findings about the implementation of prototypal MoCo platforms by exploiting nanoparticles as informative nanomessengers and herein the theoretical and computational modelling used to design MoCo systems is presented.

Light-Driven Hovering of a Magnetic Microswarm in Fluid

Swarm behaviors are nature's strategies for performing cooperative work, and extensive research has been aimed at emulating these strategies in engineering systems. However, the implementation of vertical motion and construction of a 3D structure are still challenging. Herein, we propose a simple strategy for creating a hybrid-driven paramagnetic tornado-like microswarm in an aqueous solution by integrating the use of a magnetic field and light. The precession of a magnetic field results in in-plane rotation, and light promotes the conversion of a planar microswarm to a microswarm tornado, thus realizing the transition from 2D to 3D patterns. This 3D microswarm is capable of performing reversible, vertical mass transportation. The reconfigurable collective behavior of the swarm from 2D to 3D motion consists of rising, hovering, oscillation, and landing stages. Moreover, this 3D tornado-like microswarm is capable of controlling the chemical reaction rate of the liquid in which it is deployed, for example, the degradation of methylene blue. The experimental results unveil that the tornado-like microswarm can enhance the overall degradation while holding the reactant nearby and inside it because of the flow difference between near and far regions of the microswarm tornado. Furthermore, by applying an oscillating magnetic field, the 3D microswarm can process the trapped methylene blue for on-demand degradation. The microswarm tornado is demonstrated to provide a method for collective vertical transportation and inspire ideas for mimicking 3D swarm behaviors in order to apply the functional performance to biomedical, catalytic, and micro-/nanoengineering applications.

Unexpected monolayer-to-bilayer transition of arylazopyrazole surfactants facilitates superior photo-control of fluid interfaces and colloids

Interfaces that can change their chemistry on demand have huge potential for applications and are prerequisites for responsive or adaptive materials. We report on the performance of a newly designed n-butyl-arylazopyrazole butyl sulfonate (butyl-AAP-C4S) surfactant that can change its structure at the air-water interface by E/Z photo-isomerization in an unprecedented way. Large and reversible changes in surface tension (Δγ = 27 mN m-1) and surface excess (ΔΓ > 2.9 μmol m-2) demonstrate superior performance of the butyl-AAP-C4S amphiphile to that of existing ionic surfactants. Neutron reflectometry and vibrational sum-frequency generation spectroscopy reveal that these large changes are caused by an unexpected monolayer-to-bilayer transition. This exceptional behavior is further shown to have dramatic consequences at larger length scales as highlighted by applications like the light-triggered collapse of aqueous foam which is tuned from high (>1 h) to low (<10 min) stabilities and light-actuated particle motion via Marangoni flows.

Design of Collective Motions from Synthetic Molecular Switches, Rotors, and Motors

Precise control over molecular movement is of fundamental and practical importance in physics, biology, and chemistry. At nanoscale, the peculiar functioning principles and the synthesis of individual molecular actuators and machines has been the subject of intense investigations and debates over the past 60 years. In this review, we focus on the design of collective motions that are achieved by integrating, in space and time, several or many of these individual mechanical units together. In particular, we provide an in-depth look at the intermolecular couplings used to physically connect a number of artificial mechanically active molecular units such as photochromic molecular switches, nanomachines based on mechanical bonds, molecular rotors, and light-powered rotary motors. We highlight the various functioning principles that can lead to their collective motion at various length scales. We also emphasize how their synchronized, or desynchronized, mechanical behavior can lead to emerging functional properties and to their implementation into new active devices and materials.

Print metallic nanoparticles on a fiber probe for 1064-nm surface-enhanced Raman scattering

This Letter presents 1064-nm surface-enhanced Raman scattering (SERS) on an optical fiber probe, or 1064-nm-SERS-on-fiber. Metallic nanoparticles are printed on an optical fiber probe by using optothermal surface bubbles under ambient conditions. An optothermal surface bubble is a laser-induced micro-sized bubble that is formed on a solid-liquid interface. The SERS activity of the optical fiber probe for 1064-nm Raman microscopy is tested with rhodamine 6G in aqueous solution. The 1064-nm-SERS-on-fiber can reduce the fluorescent background noise that commonly exists in other Raman systems. It can also compensate for the decreased Raman signal due to the use of an infrared Raman laser. The 1064-nm-SERS-on-fiber will find potential applications in low-background-noise biosensing and endoscopy.

Separation of Floating Oil Drops Based on Drop-Liquid Substrate Interfacial Tension

Though various strategies exist for the transport of oil drops suspended on a liquid substrate, selective manipulation of different kinds of drops based on their respective characteristics remains a challenge. In practice, it is possible to have multiple drops having different wetting states with the liquid substrate, whose separation is desired. In this work, we exploit curvature-induced capillary forces for the selective manipulation (transport as well as separation) of oil droplets based on their interfacial tension (IFT) with the underlying liquid substrate. To demonstrate this, we have selected two oils having different IFTs with the aqueous liquid substrate and tuned their curvature-induced capillary interaction (inward or outward from the source) by controlled addition of the surfactant. We experimentally realize three droplet manipulation regimes: repulsion, attraction, and separation regime. In the repulsion and attraction regimes, both the drops behave in a similar manner. Strikingly, in the separation regime, drops can be effectively separated based on their IFT; low IFT droplets are attracted toward the source, while high IFT droplets do the reverse.

Photoswitchable Dissipative Two-Dimensional Colloidal Crystals

Control over particle interactions and organization at fluid interfaces is of great importance both for fundamental studies and practical applications. Rendering these systems stimulus-responsive is thus a desired challenge both for investigating dynamic phenomena and realizing reconfigurable materials. Here, we describe the first reversible photocontrol of two-dimensional colloidal crystallization at the air/water interface, where millimeter-sized assemblies of microparticles can be actuated through the dynamic adsorption/desorption behavior of a photosensitive surfactant added to the suspension. This allows us to dynamically switch the particle organization between a highly crystalline (under light) and a disordered (in the dark) phase with a fast response time (crystallization in ≈10 s, disassembly in ≈1 min). These results evidence a new kind of dissipative system where the crystalline state can be maintained only upon energy supply.