Potential Safety Hazards Associated with Using N,N-Dimethylformamide in Chemical Reactions

Enantio- and Diastereoselective Total Synthesis of Belzutifan Enabled by Rh-Catalyzed Hydrogenation

Herein, we report a nine-step synthesis of belzutifan enabled by a novel Rh-catalyzed asymmetric hydrogenation to install the contiguous fluorinated stereocenters with high enantioselectivity. Moreover, the final ketone reduction in the synthesis proceeds with high diastereoselectivity, leading to the expedient assembly of the stereotriad. In contrast to the original 16-step synthesis, this route avoids a lengthy bromination-oxidation sequence and introduces the sulfone functionality via nucleophilic aromatic substitution, obviating the need for transition metal catalysis.

Rapid Oxidative Detoxification of Mustard Simulant by the Multisite Synergistic Catalytic Action of {PMoVI11MoVO40CuI8} Units

Under hydrothermal and solvent-thermal conditions, we synthesized two novel polyoxometalate (POM)-based hybrids: [CuI4(Pz)2(H2O)8(PMoVI11MoVO40)]·3.5H2O (1, Pz = pyrazine) and [(C2H8N)5(HPMoVI9MoV3O40)]·DMF·4H2O (2). Single-crystal X-ray diffraction indicates that compound 1 is a three-dimensional structure consisting of Cu (I), {PMo12} anions, Pz, and water, where Cu (I) can be considered as Lewis acid sites. Furthermore, both compounds 1 and 2 possess favorable catalysis activity in catalyzing the conversion of chemical warfare agent simulant 2-chloroethylethyl sulfide (CEES) to nontoxic production of 2-chloroethylethyl sulfoxide (CEESO) under ambient temperature. Significantly, 1 could realize 98% conversion and 100% selectivity of CEES owing to the multisite synergy in the {PMoVI11MoVO40CuI8} units in which the tricoordinated Cu (I) could interact with S and O atoms from CEES and H2O2, respectively. This interaction not only decreases the distance of CEES from peroxomolybdenum species formed by H2O2 but also activates CEES.

Nitrosamine Impurities in Pharmaceuticals: An Empirical Review of their Detection, Mechanisms, and Regulatory Approaches

Since their discovery in valsartan-containing drugs, nitrosamine impurities have emerged as a significant safety problem in pharmaceutical products, prompting extensive recalls and suspensions. Valsartan, candesartan, irbesartan, olmesartan, and other sartans have been discovered to have additional nitrosamine impurities, such as N-nitroso-N-methyl-4-aminobutyric acid (NMBA), N-nitroso-Di-isopropyl amine (NDIPA), N-nitroso-Ethyl-Isopropyl amine (NEIPA), and N-nitroso-Diethyl amine (NDEA). Concerns about drug safety have grown in response to reports of nitrosamine contamination in pharmaceuticals, such as pioglitazone, rifampin, rifapentine, and varenicline. This review investigates the occurrence and impact of nitrosamine impurities in sartans and pharmaceutical goods, as well as their underlying causes. The discussion emphasizes the significance of comprehensive risk assessment and mitigation approaches at various phases of medication development and manufacturing. The link between amines and nitrosamine impurities is also investigated, with an emphasis on pH levels and the behaviour of primary, secondary, tertiary, and quaternary amines. Regulations defining standards for nitrosamine assessment and management, such as ICH Q3A-Q3E and ICH M7, are critical in resolving impurity issues. Furthermore, the Global Substance Registration System (GSRS) is underlined as being critical for information sharing and product safety in the pharmaceutical industry. The review specifically focuses on the relationship between ranitidine and N-nitroso dimethyl amine (NDMA) in the context of the implications of nitrosamine contamination on patient safety and medicine supply. The importance of regulatory authorities in discovering and correcting nitrosamine impurities is highlighted in order to improve patient safety, product quality, and life expectancy. Furthermore, the significance of ongoing study and attention to nitrosamine-related repercussions for increasing pharmaceutical safety and overall public health is emphasized.

Short and Efficient Synthesis of the Antituberculosis Agent Pretomanid from (R)-Glycidol

An efficient gram-scale synthesis of the antituberculosis agent pretomanid using straightforward chemistry, mild reaction conditions, and readily available starting materials is reported. Four different protecting groups on the glycidol moiety were investigated for their technical feasibility and ability to suppress side reactions. Starting from readily available protected (R)-glycidols and 2-bromo-4-nitro-1H-imidazole, pretomanid could be prepared in a linear three-step synthesis in up to 40% isolated yield. In contrast to most syntheses reported so far, deprotection and cyclization were performed in a one-pot fashion without any hazardous steps or starting materials.

Palladium-catalyzed C-H dimethylamination of 1-chloromethyl naphthalenes with N,N-dimethylformamide as the dimethyl amino source

Palladium-catalyzed remote C-H dimethylamination of 1-chloromethylnaphthalenes using N,N-dimethylformamide as the dimethylamino source is described for the first time. The dimethylamination took place exclusively at the 4-position of 1-chloromethylnaphthalenes in 2-methyltetrahydrofuran under mild conditions to afford 1-(N,N-dimethylamino)-4-alkylnaphthalenes in good to high yields. The halogen atom remained intact during the dimethylamination of 1-chloromethylnaphthalenes. A P,N bidentate ligand was conveniently synthesized and successfully utilized as the ligand in the Kumada-Corriu reaction.

Practical and Scalable Two-Step Process for 6-(2-Fluoro-4-nitrophenyl)-2-oxa-6-azaspiro[3.3]heptane: A Key Intermediate of the Potent Antibiotic Drug Candidate TBI-223

A low-cost, protecting group-free route to 6-(2-fluoro-4-nitrophenyl)-2-oxa-6-azaspiro[3.3]heptane (1), the starting material for the in-development tuberculosis treatment TBI-223, is described. The key bond forming step in this route is the creation of the azetidine ring through a hydroxide-facilitated alkylation of 2-fluoro-4-nitroaniline (2) with 3,3-bis(bromomethyl)oxetane (BBMO, 3). After optimization, this ring formation reaction was demonstrated at 100 g scale with isolated yield of 87% and final product purity of >99%. The alkylating agent 3 was synthesized using an optimized procedure that starts from tribromoneopentyl alcohol (TBNPA, 4), a commercially available flame retardant. Treatment of 4 with sodium hydroxide under Schotten-Baumann conditions closed the oxetane ring, and after distillation, 3 was recovered in 72% yield and >95% purity. This new approach to compound 1 avoids the previous drawbacks associated with the synthesis of 2-oxa-6-azaspiro[3,3]heptane (5), the major cost driver used in previous routes to TBI-223. The optimization and multigram scale-up results for this new route are reported herein.

Solvent-derived defects suppress adsorption in MOF-74

Defects in metal-organic frameworks (MOFs) have great impact on their nano-scale structure and physiochemical properties. However, isolated defects are easily concealed when the frameworks are interrogated by typical characterization methods. In this work, we unveil the presence of solvent-derived formate defects in MOF-74, an important class of MOFs with open metal sites. With multi-dimensional solid-state nuclear magnetic resonance (NMR) investigations, we uncover the ligand substitution role of formate and its chemical origin from decomposed N,N-dimethylformamide (DMF) solvent. The placement and coordination structure of formate defects are determined by ¹³C NMR and density functional theory (DFT) calculations. The extra metal-oxygen bonds with formates partially eliminate open metal sites and lead to a quantitative decrease of N₂ and CO₂ adsorption with respect to the defect concentration. In-situ NMR analysis and molecular simulations of CO₂ dynamics elaborate the adsorption mechanisms in defective MOF-74. Our study establishes comprehensive strategies to search, elucidate and manipulate defects in MOFs.

Tailored Synthesis of Catalytically Active Cerium Oxide for N, N-Dimethylformamide Oxidation

Cerium oxide nanopowder (CeO_x) was prepared using the sol-gel method for the catalytic oxidation of N, N-dimethylformamide (DMF). The phase, specific surface area, morphology, ionic states, and redox properties of the obtained nanocatalyst were systematically characterized using XRD, BET, TEM, EDS, XPS, H₂-TPR, and O₂-TPO techniques. The results showed that the catalyst had a good crystal structure and spherelike morphology with the aggregation of uniform small grain size. The catalyst showed the presence of more adsorbed oxygen on the catalyst surface. XPS and H₂-TPR have confirmed the reduction of Ce⁴⁺ species to Ce³⁺ species. O₂-TPR proved the reoxidability of CeO_x, playing a key role during DMF oxidation. The catalyst had a reaction rate of 1.44 mol g^-1_cat s^-1 and apparent activation energy of 33.30 ± 3 kJ mol^-1. The catalytic performance showed ~82 ± 2% DMF oxidation at 400 °C. This work's overall results demonstrated that reducing Ce⁴⁺ to Ce³⁺ and increasing the amount of adsorbed oxygen provided more suitable active sites for DMF oxidation. Additionally, the catalyst was thermally stable (~86%) after 100 h time-on-stream DMF conversion, which could be a potential catalyst for industrial applications.

One-Pot Domino Reaction: Direct Access to Polysubstituted 1,4-Benzothiazine 1,1-Dioxide via Water-Gas Shift Reaction Utilizing DMF/H2O

Benzothiazine 1,1-dioxide (BTDO) is a privileged chemical motif, and its metal-free domino access is in high demand. Current BTDO production methods require costly metal catalysts or harsh reaction conditions. A facile domino approach to BTDO via a water-gas shift reaction (WGSR) employing sodium 2-nitrobenzenesulfinates and α-bromo ketones is presented. This strategy is cost-effective and environmentally beneficial. The optimized reaction conditions demonstrated remarkable chemical tolerance to a wide range of electrically and sterically varied substituents on both coupling partners.

Synthesis of 7-Aminocoumarins from 7-Hydroxycoumarins via Amide Smiles Rearrangement

N-Substituted 7-aminocoumarins can be synthesized from readily available 7-hydroxycoumarins via alkylation with α-bromoacetamides and subsequent tandem O → N Smiles rearrangement-amide hydrolysis. The key rearrangement sequence proceeds under mild conditions to provide convenient access to various N-alkyl and N-aryl products in moderate to high yields. The process is operationally simple, inexpensive, transition-metal-free, and can be telescoped into a one-pot process.

A screening method for binding synthetic metallo-complexes to haem proteins

The introduction of a second coordination sphere, in the form of a protein scaffold, to synthetic catalysts can be beneficial for their reactivity and substrate selectivity. Here we present semi-native polyacrylamide gel electrophoresis (semi-native PAGE) as a rapid screening method for studying metal complex-protein interactions. Such a screening is generally performed using electron spray ionization mass spectrometry (ESI-MS) and/or UV-Vis spectroscopy. Semi-native PAGE analysis has the advantage that it does not rely on spectral changes of the metal complex upon protein interaction and can be applied for high-throughput screening and optimization of complex binding. In semi-native PAGE non-denatured protein samples are loaded on a gel containing sodium dodecyl sulphate (SDS), leading to separation based on differences in structural stability. Semi-native PAGE gel runs of catalyst-protein mixtures were compared to gel runs obtained with native and denaturing PAGE. ESI-MS was additionally realised to confirm protein-complex binding. The general applicability of semi-native PAGE was investigated by screening the binding of various cobalt- and ruthenium-based compounds to three types of haem proteins.

Replacement of Less-Preferred Dipolar Aprotic and Ethereal Solvents in Synthetic Organic Chemistry with More Sustainable Alternatives

Dipolar aprotic and ethereal solvents comprise just over 40% of all organic solvents utilized in synthetic organic, medicinal, and process chemistry. Unfortunately, many of the common "go-to" solvents are considered to be "less-preferable" for a number of environmental, health, and safety (EHS) reasons such as toxicity, mutagenicity, carcinogenicity, or for practical handling reasons such as flammability and volatility. Recent legislative changes have initiated the implementation of restrictions on the use of many of the commonly employed dipolar aprotic solvents such as dimethylformamide (DMF) and N-methyl-2-pyrrolidinone (NMP), and for ethers such as 1,4-dioxane. Thus, with growing legislative, EHS, and societal pressures, the need to identify and implement the use of alternative solvents that are greener, safer, and more sustainable has never been greater. Within this review, the ubiquitous nature of dipolar aprotic and ethereal solvents is discussed with respect to the physicochemical properties that have made them so appealing to synthetic chemists. An overview of the current legislative restrictions being imposed on the use of dipolar aprotic and ethereal solvents is discussed. A variety of alternative, safer, and more sustainable solvents that have garnered attention over the past decade are then examined, and case studies and examples where less-preferable solvents have been successfully replaced with a safer and more sustainable alternative are highlighted. Finally, a general overview and guidance for solvent selection and replacement are included in the Supporting Information of this review.

Tetramethylammonium Fluoride: Fundamental Properties and Applications in C-F Bond-Forming Reactions and as a Base

Nucleophilic ionic sources of fluoride are essential reagents in the synthetic toolbox to access high added-value fluorinated building blocks unattainable by other means. In this review, we provide a concise description and rationale of the outstanding features of one of these reagents, tetramethylammonium fluoride (TMAF), as well as disclosing the different methods for its preparation, and how its physicochemical properties and solvation effects in different solvents are intimately associated with its reactivity. Furthermore, herein we also comprehensively describe its historic and recent utilization, up to December 2021, in C-F bond-forming reactions with special emphasis on nucleophilic aromatic substitution fluorinations with a potential sustainable application in industrial settings, as well as its use as a base capable of rendering unprecedented transformations.

Construction of a series of Ln-MOFs Luminescent sensors based a functional “V” shaped ligand

Abstract: It is necessary for decreasing application cost of luminescent Ln-MOFs sensors to develop multiple functionalities. The ingenious design of ligands and the rational dope of Ln3+ ions are main...

A Journey from June 2018 to October 2021 with N,N-Dimethylformamide and N,N-Dimethylacetamide as Reactants

A rich array of reactions occur using N,N-dimethylformamide (DMF) or N,N-dimethylacetamide (DMAc) as reactants, these two amides being able to deliver their own H, C, N, and O atoms for the synthesis of a variety of compounds. This account highlights the literature published since June 2018, completing previous reviews by the author.

Photoassisted Charge Transfer Between DMF and Substrate: Facile and Selective N,N-Dimethylamination of Fluoroarenes

A reversible Van der Waals complex formation between the electron-deficient fluorinated aromatic ring and N,N-dimethylformamide (DMF) molecules followed by light irradiation resulted in charge transfer (CT) process. The complex was stabilized by ammonium formate and further decomposed to form the C-N bond. Control experiments revealed that the simultaneous S_N Ar pathway also contributes to product formation. This methodology is mild, metal-free, and effective for the amination of a variety of substrates. The reproducibility of this methodology was also verified on gram-scale reactions. The CT states were supported by control UV/Vis spectroscopy and computational studies.