Fluorinated Anions Promoted “on Water” Activity of Di- and Tetranuclear Copper(I) Catalysts for Functional Triazole Synthesis

Copper-Catalyzed Azide–Alkyne Cycloaddition (CuAAC) by Functionalized NHC-Based Polynuclear Catalysts: Scope and Mechanistic Insights

Copper(I) [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂L)]_n (L = OMe, NEt₂, NH^tBu) compounds supported by flexible functionalized NHC-based polydentate ligands have been prepared in a one-pot procedure by reacting the corresponding imidazolium salt with an excess of copper powder and Ag₂O. An X-ray diffraction analysis has revealed that [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂NEt₂)]_n is a linear coordination polymer formed by bimetallic [Cu(μ-Br)]₂ units linked by the lutidine-based NHC-py-NEt₂ ligand, which acts as a heteroditopic ligand with a 1κC-2κ²N,N′ coordination mode. We propose that the polymeric compounds break down in the solution into more compact tetranuclear [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂L)]₂ compounds with a coordination mode identical to the functionalized NHC ligands. These compounds have been found to exhibit high catalytic activity in the Cu-catalyzed azide–alkyne cycloaddition (CuAAC) reaction. In particular, [Cu₂(μ-Br)₂(^tBuImCH₂pyCH₂NEt₂)]₂ efficiently catalyzes the click reaction of a range of azides and alkynes, under an inert atmosphere at room temperature in neat conditions at a very low catalyst loading, to quantitatively afford the corresponding 1,4-disubstituted 1,2,3-triazole derivatives in a few minutes. The cycloaddition reaction of benzyl azide to phenylacetylene can be performed at 25–50 ppm catalyst loading by increasing the reaction time and/or temperature. Reactivity studies have shown that the activation of the polynuclear catalyst precursor involves the alkyne deprotonation by the NHC moiety of the polydentate ligand to afford a copper(I)-alkynyl species bearing a functionalized imidazolium ligand. DFT calculations support the participation of the dinuclear species [(CuBr)₂(μ-^tBuImCH₂pyCH₂NEt₂)], resulting from the fragmentation of the tetranuclear compound, as the catalytically active species. The proposed reaction pathway proceeds through zwitterionic dinuclear intermediates and entails the active participation of both copper atoms, as well as the NHC moiety as an internal base, which activates the reacting alkyne via deprotonation.

Azide-Alkyne "Click" Reaction in Water Using Parts-Per-Million Amine-Functionalized Azoaromatic Cu(I) Complex as Catalyst: Effect of the Amine Side Arm

A series of Cu(II) complexes, 1-4 and 6, were synthesized through a reaction of amine-functionalized pincer-like ligands, HL^1,2, L^a,b, and a bidentate ligand L¹ with CuCl₂·2H₂O. The chemical reduction of complex 1 using 1 equiv of sodium l-ascorbate resulted in a dimeric Cu(I) complex 5 in excellent yield. All of the complexes, 1-6, were thoroughly characterized using various physicochemical characterization techniques, single-crystal X-ray structure determination, and density functional theory calculations. Ligands HL^1,2 and L^a,b behaved as tridentated donors by the coordination of the amine side arm in their respective Cu(II) complexes, and the amine side arm remained as a pendant in Cu(I) complexes. All of these complexes (1-6) were explored for copper(I)-catalyzed 1,3-dipolar azide-alkyne cycloaddition (CuAAC) reaction at room temperature in water under air. Complex 5 directly served as an active catalyst; however, complexes 1-4 and 6 required 1 equiv of sodium l-ascorbate to generate their corresponding active Cu(I) catalyst. It has been observed that azo-based ligand-containing Cu(I)-complexes are air-stable and were highly efficient for the CuAAC reaction. The amine side arm in the ligand backbone has a dramatic role in accelerating the reaction rate. Mechanistic investigations showed that the alkyne C-H deprotonation was the rate-limiting step and the pendant amine side arm intramolecularly served as a base for Cu-coordinated alkyne deprotonation, leading to the azide-alkyne 2 + 3 cycloaddition reaction. Thus, variation of the amine side arm in complexes 1-4 and use of the most basic diisopropyl amine moiety in complex 4 has resulted in an unique amine-functionalized azoaromatic Cu(I) system for CuAAC reaction upon sodium l-ascorbate reduction. The complex 4 has shown excellent catalysis at its low parts-per-million level loading in water. The catalytic protocol was versatile and exhibited very good functional group tolerance. It was also employed efficiently to synthesize a number of useful functional triazoles having medicinal, catalytic, and targeting properties.

Bimetallics in a Nutshell: Complexes Supported by Chelating Naphthyridine-Based Ligands

Bimetallic motifs are a structural feature common to some of the most effective and synthetically useful catalysts known, including in the active sites of many metalloenzymes and on the surfaces of industrially relevant heterogeneous materials. However, the complexity of these systems often hampers detailed studies of their fundamental properties. To glean valuable mechanistic insight into how these catalysts function, this research group has prepared a family of dinucleating 1,8-naphthyridine ligands that bind two first-row transition metals in close proximity, originally designed to help mimic the proposed active site of metal oxide surfaces. Of the various bimetallic combinations examined, dicopper(I) is particularly versatile, as neutral bridging ligands adopt a variety of different binding modes depending on the configuration of frontier orbitals available to interact with the Cu centers. Organodicopper complexes are readily accessible, either through the traditional route of salt metathesis or via the activation of tetraarylborate anions through aryl group abstraction by a dicopper(I) unit. The resulting bridging aryl complexes engage in C-H bond activations, notably with terminal alkynes to afford bridging alkynyl species. The μ-hydrocarbyl complexes are surprisingly tolerant of water and elevated temperatures. This stability was leveraged to isolate a species that typically represents a fleeting intermediate in Cu-catalyzed azide-alkyne coupling (CuAAC); reaction of a bridging alkynyl complex with an organic azide afforded the first example of a well-defined, symmetrically bridged dicopper triazolide. This complex was shown to be an intermediate during CuAAC, providing support for a proposed bimetallic mechanism. These platforms are not limited to formally low oxidation states; chemical oxidation of the hydrocarbyl complexes cleanly results in formation of mixed valence Cu^ICu^II complexes with varying degrees of distortion in both the bridging moiety and the dicopper core. Higher oxidation states, e.g., dicopper(II), are easily accessed via oxidation of a dicopper(I) compound with air to give a Cu^II₂(μ-OH)₂ complex. Reduction of this compound with silanes resulted in the unexpected formation of pentametallic copper(I) dihydride clusters or trimetallic monohydride complexes, depending on the nature of the silane. Finally, development of an unsymmetrical naphthyridine ligand with mixed donor side-arms enables selective synthesis of an isostructural series of six heterobimetallic complexes, demonstrating the power of ligand design in the preparation of heterometallic assemblies.

A ferrocene functionalized Schiff base containing Cu(ii) complex: synthesis, characterization and parts-per-million level catalysis for azide alkyne cycloaddition

Atom economy is one of the major factors in developing catalysis chemistry. Using the minimum amount of catalyst to obtain the maximum product yield is of the utmost priority in catalysis, which drives us to use parts-per-million (ppm) levels of catalyst loadings in syntheses. In this context, a new ferrocene functionalized Schiff base and its copper(ii) complex have been synthesized and characterized. This Cu(ii) complex is employed as a catalyst for popular 'click chemistry', where 1,2,3-triazoles are the end product. As low as 5 ppm catalyst loading is enough to produce gram scale product, and highest turnover number (TON) and turnover frequency (TOF) values of 140 000 and 70 000 h^-1 are achieved, respectively. Furthermore, this highly efficient protocol has been successfully applied to the preparation of diverse functionalized materials with pharmaceutical, labelling and supramolecular properties.

Carbon nitride as a ligand: edge-site coordination of ReCl(CO)3-fragments to g-C3N4

IR spectroscopy and model structural studies show binding of ReCl(CO)₃-fragments to carbon nitride (g-C₃N₄) occurs viaκ² N,N' bidentate coordination.

Linear Copper Complex Arrays as Versatile Molecular Strings: Syntheses, Structures, Luminescence, and Magnetism

The defined linear arrangement of metal atoms in discrete coordination complexes or polymers is still one of the most intriguing challenges in synthetic chemistry. These chain arrangements are of fundamental importance, because of their potential applications as molecular wires and single molecule magnets (SMM) in microelectronic devices on a molecular scale. Oligonuclear Group 11 metal complexes with suitable bridging ligands, specifically those that are based on copper as the first choice of a cheap precursor coinage metal, are of particular interest in this regard. This is due to the superior luminescence properties of these linear clusters that often show d¹⁰ ⋅⋅⋅d¹⁰ interactions in their molecular structures. The combination of Cu^I with heavier coinage metal ions results in tunable emissive arrays that are also stimuli-responsive. Thus, both linear multinuclear Cu^I and linear heteropolymetallic Cu^I /Ag^I as well as Cu^I /Au^I clusters are excellent candidates for applications in molecular/organic light-emitting devices (OLEDs). Alternatively, paramagnetic multinuclear cupric arrays are prominent as potential molecular wires with enhanced magnetic properties through multiple coupled d⁹ centers. This Review covers the whole range of linear multinuclear assemblies of cuprous and cupric ions in complexes and coordination polymers, their syntheses, photophysical behavior, and magnetic properties. Moreover, recent advances in the rapidly progressing field of hetero-Cu^I /Ag^I and Cu^I /Au^I molecular strings are also discussed.

Copper(I)-catalyzed tandem reaction: synthesis of 1,4-disubstituted 1,2,3-triazoles from alkyl diacyl peroxides, azidotrimethylsilane, and alkynes

A copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction for the synthesis of 1,4-disubstituted 1,2,3-triazoles from alkyl diacyl peroxides, azidotrimethylsilane, and terminal alkynes is reported. The alkyl carboxylic acids is for the first time being used as the alkyl azide precursors in the form of alkyl diacyl peroxides. This method avoids the necessity to handle organic azides, as they are generated in situ, making this protocol operationally simple. The Cu(I) catalyst not only participates in the alkyl diacyl peroxides decomposition to afford alkyl azides but also catalyzes the subsequent CuAAC reaction to produce the 1,2,3-triazoles.

Construction of copper chains with new fluorescent guanidino-functionalized naphthyridine ligands

A high charge and a low coordination number are the characteristics of fluorescent Cu₄ chain complexes with 2,7-bisguanidino-naphthyridine ligands.