Detailed Mechanism for Hiyama Coupling Reaction in Water Catalyzed by Linear Polystyrene-Stabilized PdO Nanoparticles

Organic and Metal-Organic Polymer-Based Catalysts-Enfant Terrible Companions or Good Assistants?

This overview provides insights into organic and metal-organic polymer (OMOP) catalysts aimed at processes carried out in the liquid phase. Various types of polymers are discussed, including vinyl (various functional poly(styrene-co-divinylbenzene) and perfluorinated functionalized hydrocarbons, e.g., Nafion), condensation (polyesters, -amides, -anilines, -imides), and additional (polyurethanes, and polyureas, polybenzimidazoles, polyporphyrins), prepared from organometal monomers. Covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and their composites represent a significant class of OMOP catalysts. Following this, the preparation, characterization, and application of dispersed metal catalysts are discussed. Key catalytic processes such as alkylation-used in large-scale applications like the production of alkyl-tert-butyl ether and bisphenol A-as well as reduction, oxidation, and other reactions, are highlighted. The versatile properties of COFs and MOFs, including well-defined nanometer-scale pores, large surface areas, and excellent chemisorption capabilities, make them highly promising for chemical, electrochemical, and photocatalytic applications. Particular emphasis is placed on their potential for CO2 treatment. However, a notable drawback of COF- and MOF-based catalysts is their relatively low stability in both alkaline and acidic environments, as well as their high cost. A special part is devoted to deactivation and the disposal of the used/deactivated catalysts, emphasizing the importance of separating heavy metals from catalysts. The conclusion provides guidance on selecting and developing OMOP-based catalysts.

A Green Synthesis Strategy of Binuclear Catalyst for the C-C Cross-Coupling Reactions in the Aqueous Medium: Hiyama and Suzuki-Miyaura Reactions as Case Studies

Cellulose, as a green and available phytochemical, was immobilized on the surface of magnetite nanoparticles then doped with imidazole and Co. complex (Fe3O4@CNF ∼ ImSBL ∼ Co.) and used as a water-dispersible, recyclable and efficient nano catalyst for the synthesis of C-C cross-coupling reactions including fluoride-free Hiyama and Suzuki reactions in an aqueous medium as an efficient and vital solvent, due to their high application and importance in various fields of science. Different spectroscopic and microscopic techniques were used for the catalyst characterization such XRD, FESEM, TEM, FT-IR, EDX, DLS, VSM, UV-Vis, and ICP analyses. The presence of imidazole as ionic section tags with hydrophilic character on the Co-complex supported on magnetic nanoparticles provides dispersion of the catalyst particles in water, which leads to both higher catalytic performance and also facile catalyst recovery and reuse six times by successive extraction and final magnetic separation. High catalytic activity was found for the catalyst and high to excellent efficiency was obtained for all Suzuki (80-98% yield; E factor: 1.1-1.9) and Hiyama (87-98% yield; E factor: 0.26-1.1) derivatives in short reaction times under mild reaction conditions in the absence of any hazardous or expensive materials. There is not any noticeable by-product found whether for Suzuki or Hiyama derivatives, which reflects the high selectivity and also the lower the E factor the more favorable is the process in view of green chemistry. The bi-aryls were achieved from the reaction of various aryl iodides/bromides and even chlorides as the highly challenging substrates, which are more available and cheaper, with triethoxyphenylsilane or phenylboronic acid. To prove the performance of the catalyst components (synergistic of SBL ∼ Co. and IL), its different homologs were incorporated individually and studied for a model reaction. Exclusively, this is an introductory statement on the use of Cobalt binuclear symmetric ionic liquid catalysts in Hiyama reactions.

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support.

Suzuki–Miyaura Cross-Coupling Reaction with Potassium Aryltrifluoroborate in Pure Water Using Recyclable Nanoparticle Catalyst

This paper describes the Suzuki–Miyaura cross-coupling reaction of aryl bromides with potassium aryltrifluoroborates in water catalyzed by linear polystyrene-stabilized PdO nanoparticles (PS-PdONPs). The reaction of aryl bromides having electron-withdrawing groups or electron-donating groups took place smoothly to give the corresponding coupling product in high yields. The catalyst recycles five times without significant loss of catalytic activity although a little bit increase in size of PdNPs was observed after the reaction.

Tetrabutylphosphonium 4-ethoxyvalerate as a biomass-originated media for homogeneous palladium-catalyzed Hiyama coupling reactions

The introduction of a biomass-derived ionic liquid into the Hiyama coupling reactions, which has been considered as a powerful tool for the synthesis of symmetrically and non-symmetrically substituted biaryl structures, could further control or even reduce the environmental impact of this transformation. It was shown that tetrabutylphosphonium 4-ethoxyvalerate, a γ-valerolactone-based ionic liquid, can be utilized as an alternative solvent to create carbon–carbon bonds between aryl iodides and functionalized organosilanes in the presence of 1 mol% Pd under typical Hiyama conditions (130 °C, 24 h, tetrabutylammonium fluoride activator). A comparison of different ionic liquids was performed, and the effects of the catalyst precursor and the moisture content of the reaction mixture on the activity of the catalyst system were investigated. The functional group tolerance was also studied, resulting in 15 cross-coupling products (3a–o) with isolated yields of 45–72% and excellent purity (> 98%).

Mechanistic Study on Allylic Arylation in Water with Linear Polystyrene-Stabilized Pd and PdO Nanoparticles

The catalytic cycle of allylic arylation in water catalyzed by linear polystyrene-stabilized Pd or PdO nanoparticles (PS-PdNPs or PS-PdONPs) was investigated. Stoichiometric stepwise reactions indicated that the reaction did not proceed stepwise on the surface of the catalyst. In the case of the reaction with PS-PdNPs, the leached Pd species is the catalytically active species and the reaction takes place through a similar reaction pathway accepted in the case of a complex catalyst. In contrast, allylic arylation using PS-PdONPs as a catalyst occurs via a Pd(II) catalytic cycle.

Recent advances in the application of nano-catalysts for Hiyama cross-coupling reactions

This mini-review highlights the recent developments in the field of metal nanoparticle (NP) catalyzed Hiyama cross-coupling reactions.

Poly(tetrafluoroethylene)-Stabilized Metal Nanoparticles: Preparation and Evaluation of Catalytic Activity for Suzuki, Heck, and Arene Hydrogenation in Water

Poly(tetrafluoroethylene)-stabilized Pd nanoparticles (PTFE-PdNPs) were prepared in water with 4-methylphenylboronic acid as a reductant and characterized using powder X-ray diffraction, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy, and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Small PdNPs with a fairly uniform size were obtained in the presence of PTFE, whereas aggregation of palladium was observed in the absence of PTFE. PTFE-PdNPs showed high catalytic activity for the Suzuki coupling reaction in water and were reused without any loss of activity. No palladium species were observed by ICP-AES analysis in the reaction solution after the reaction, nor was any change in particle size observed after the recycle experiment. PTFE-PdNPs also exhibited excellent catalytic activity and reusability for the Heck reaction in water. Although palladium species were not detected in the reaction solution after the reaction, aggregates and smaller sizes of PdNPs were observed in the TEM image of the recovered catalyst. PTFE was also useful as the stabilizer of rhodium nanoparticles (RhNPs) prepared by reduction with NaBH4. PTFE-RhNPs showed high catalytic activity and reusability toward arene hydrogenation under mild conditions.

Catalytic Organic Reactions in Water toward Sustainable Society

Traditional organic synthesis relies heavily on organic solvents for a multitude of tasks, including dissolving the components and facilitating chemical reactions, because many reagents and reactive species are incompatible or immiscible with water. Given that they are used in vast quantities as compared to reactants, solvents have been the focus of environmental concerns. Along with reducing the environmental impact of organic synthesis, the use of water as a reaction medium also benefits chemical processes by simplifying operations, allowing mild reaction conditions, and sometimes delivering unforeseen reactivities and selectivities. After the "watershed" in organic synthesis revealed the importance of water, the development of water-compatible catalysts has flourished, triggering a quantum leap in water-centered organic synthesis. Given that organic compounds are typically practically insoluble in water, simple extractive workup can readily separate a water-soluble homogeneous catalyst as an aqueous solution from a product that is soluble in organic solvents. In contrast, the use of heterogeneous catalysts facilitates catalyst recycling by allowing simple centrifugation and filtration methods to be used. This Review addresses advances over the past decade in catalytic reactions using water as a reaction medium.