Nonradical Light-Controlled Polymerization of Styrene and Vinyl Ethers Catalyzed by an Iridium–Palladium Photocatalyst

Di(pyridin-2-yl)amino-substituted 1,10-phenanthrolines and their Ru(II)-Pd(II) dinuclear complexes: synthesis, characterization and application in Cu-free Sonogashira reaction

Dinuclear complexes bearing Ru(II) photoactive centers are of interest for the development of efficient dual catalysts for many photocatalyzed reactions. Ditopic polypyridine ligands, bis(pyridin-2-yl)amino-1,10-phenanthrolines, containing an additional coordination site (bis(pyridin-2-yl)amine, dpa) at positions 3, 4 or 5 of the 1,10-phenanthroline core (Phen-3NPy2, Phen-4NPy2 and Phen-5NPy2) were synthesized. They were used as bridging ligands to obtain dinuclear complexes [(bpy)2Ru(Phen-NPy2)PdCl2](PF6)2 (Ru(Phen-NPy2)Pd) in good yields via stepwise complexation. In these complexes Ru(II) is coordinated to 1,10-phenanthroline, while Pd(II) is bound to the dpa chelating moiety, as established by NMR spectroscopy and X-ray single crystal analysis. The influence of the position of dpa in the phenanthroline ring on the structural, optical and electrochemical properties of Ru(Phen-NPy2)Pd complexes was studied. The complexes exhibit photoluminescence in argon-saturated MeCN solution with maxima in the range of 615-625 nm, with emission quantum yields ranging from 0.11 to 0.15 for Ru(Phen-NPy2) complexes and from 0.018 to 0.026 for dinuclear Ru(Phen-NPy2)Pd complexes. All the complexes absorb visible light in the range of 370-470 nm with high extinction coefficients and can be considered useful as photocatalysts. The Ru2+/3+ potential in Ru(Phen-NPy2)Pd complexes showed no significant dependence on the dpa position, while the Pd2+/0 reduction potential was significantly lower for Ru(Phen-3NPy2)Pd and Ru(Phen-4NPy2)Pd, than for Ru(Phen-5NPy2)Pd (-0.57 V and -0.72 V vs. Ag/AgCl, KCl(sat.), respectively). The complexes were used as photoactivated precatalysts in Cu-free Sonogashira coupling under blue LEDs (12 W) irradiation. The reaction proceeded roughly three times faster when Ru(Phen-4NPy2)Pd and Ru(Phen-3NPy2)Pd were used as catalyst precursors compared to the mixed catalytic system Ru(bpy)3(PF6)2/(RNPy2)PdCl2.

Density Functional Study on the Photopolymerization of Styrene Using Dinuclear Ru-Pd and Ir-Pd Complexes with Naphthyl-Substituted Ligands

A density functional study was performed to investigate the mechanism of the photocatalytic reactivity of styrene polymerization using dinuclear Ru-Pd and Ir-Pd catalytic complexes. In previous experiments with these catalysts, the reactivity increased, and more polymer products were yielded compared to dimers under visible light irradiation. The best catalytic reactivity was obtained using an Ir-Pd complex containing naphthyl substituents at the phenyl ligands coordinated to Ir (Ir-Pd1). In contrast, Ir-Pd2, an isomer of Ir-Pd1, containing naphthyl substituents at the pyridine ligands, did not show good reactivity, which may be related to the stability of the excited state of the catalytic complexes. In this study, we calculated the radiative lifetimes of these catalytic complexes and Ir-Pd1 had the longest lifetime; this result was consistent with the experimental results. The longest lifetime of the Ir-Pd1 was attributed to the destabilization of the highest occupied molecular orbital (HOMO) energy by π*-π* interactions between the naphthyl and phenyl ligands. Further, this destabilization of the HOMO energy afforded a small energy gap between the HOMO and lowest unoccupied molecular orbital, enhancing the metal-to-ligand charge transfer to the bridging ligand between Ir and Pd. Additionally, we focused on the reaction of the second insertion of styrene, which was identified as the rate-determining step of the polymerization cycle in a previous study. The singlet-triplet crossing points of the intermediates were estimated, and the barrier heights of the intersystem crossing were much lower than those in the thermal paths, which explained the efficiency of the photocatalytic reactivity in the experiment.

Syntheses and structure of dinuclear metal complexes containing naphthyl-Ir bichromophore

A series of novel metal complexes were synthesized containing an Ir-cyclometalated bichromophore as a visible-light sensitizer. A new bichromophoric unit containing a naphthyl substituent and methyl substituents on the 2-phenylpyridine chelating ligand was synthesized and characterized for the first time. According to the increased crystallinity of the bichromophoric unit, novel Ir-M metal complexes (M = Pd, Mn, and Ir) were synthesized and fully characterized. The novel Ir-Pd complex maintained photocatalytic activity toward styrenes under visible-light irradiation, and polymerization with p-chlorostyrene, copolymerization with styrene and p-chlorostyrene furnished corresponding polymers.

Photoaccelerated energy transfer catalysis of the Suzuki-Miyaura coupling through ligand regulation on Ir(iii)-Pd(ii) bimetallic complexes

Three bimetallic Ir(iii)-Pd(ii) complexes [Ir(ppy)2(bpm)PdCl2](PF6) (ppy = 2-phenylpyridine, 1), [Ir(dfppy)2(bpm)PdCl2](PF6) (dfppy = (4,6-difluorophenyl)pyridine, 2), and [Ir(pq)2(bpm)PdCl2](PF6) (pq = 2-phenylquinoline, 3) were synthesized by using 2,2'-bipyrimidine (bpm) as a bridging ligand. The influences of the cyclometalated ligand at the Ir(iii) center on the photophysical and electrochemical properties as well as photocatalytic activity for the Suzuki-Miyaura coupling reaction under mild conditions were evaluated. The results revealed that complex 3 enables dramatically accelerating the Suzuki-Miyaura coupling reaction under visible light irradiation at room temperature, due to the effective absorption of visible light and appropriate locus of the excited chromophore. Mechanism studies showed that the chromophore [Ir(pq)2(bpm)] fragment absorbs visible light to produce the triplet excited state centering on the bridging ligand which boosts the formation of electron rich Pd(ii) units and facilitates the oxidative addition step of the catalytic cycle. Simultaneously, the excited chromophore undergoes energy transfer efficiently to the Pd(ii) reaction site to form the excited Pd(ii) species, resulting in enhancement of Pd(ii) reduction steps of the Suzuki-Miyaura coupling reaction and increasing the reactivity of the catalyst. This provides a new strategy for designing photocatalysts for coupling reaction through altering the cyclometalated ligand to modulate the photophysical properties and the cooperation between two metal units.

Electronically Governed ROMP: Expanding Sequence Control for Donor–Acceptor Conjugated Polymers

Controlling the primary sequence of synthetic polymers remains a grand challenge in chemistry. A variety of methods that exert control over monomer sequence have been realized wherein differential reactivity, pre-organization, and stimuli-response have been key factors in programming sequence. Whereas much has been established in nonconjugated systems, π-extended frameworks remain systems wherein subtle structural changes influence bulk properties. The recent introduction of electronically biased ring-opening metathesis polymerization (ROMP) extends the repertoire of feasible approaches to prescribe donor–acceptor sequences in conjugated polymers, by enabling a system to achieve both low dispersity and controlled polymer sequences. Herein, we discuss recent advances in obtaining well-defined (i.e., low dispersity) polymers featuring donor–acceptor sequence control, and present our design of an electronically ambiguous (4-methoxy-1-(2-ethylhexyloxy) and benzothiadiazole-(donor–acceptor-)based [2.2]paracyclophanediene monomer that undergoes electronically dictated ROMP. The resultant donor–acceptor polymers were well-defined (Đ = 1.2, Mn > 20 k) and exhibited lower energy excitation and emission in comparison to ‘sequence-ill-defined’ polymers. Electronically driven ROMP expands on prior synthetic methods to attain sequence control, while providing a promising platform for further interrogation of polymer sequence and resultant properties.

1 Introduction to Sequence Control

2 Sequence Control in Polymers

3 Multistep-Synthesis-Driven Sequence Control

4 Catalyst-Dictated Sequence Control

5 Electronically Governed Sequence Control

6 Conclusions

Mixed Polymer Brushes for "Smart" Surfaces

Mixed polymer brushes (MPBs) are composed of two or more disparate polymers covalently tethered to a substrate. The resulting phase segregated morphologies have been extensively studied as responsive "smart" materials, as they can be reversible tuned and switched by external stimuli. Both computational and experimental work has attempted to establish an understanding of the resulting nanostructures that vary as a function of many factors. This contribution highlights state-of-the-art MPBs studies, covering synthetic approaches, phase behavior, responsiveness to external stimuli as well as novel applications of MPBs. Current limitations are recognized and possible directions for future studies are identified.

On-demand hydrogen production from formic acid by light-active dinuclear iridium catalysts

Light-active dinuclear iridium pentahydride complexes catalyze the decomposition of formic acid to generate H₂ by irradiation (λ =395 nm) under ambient temperature and base-free conditions. The catalyst activity is sensitive to light producing H₂ under light irradiation, but with no reaction being observed in the absence of light or when the light is switched off, thereby demonstrating the clear ON/OFF switching ability of this system. Importantly, the dinuclear structure of the catalyst is sufficiently stable to be maintained under the catalytic conditions employed herein.

Light-mediated olefin coordination polymerization and photoswitches

This review outlines photoswitchable, transition metal-based olefin coordination polymerization catalysts ranging from homogeneous to heterogeneous, and monometallic to bimetallic regimes.

Controlled Synthesis of Block Copolymers by Mechanistic Transformation from Atom Transfer Radical Polymerization to Iniferter Process

A straightforward transformation protocol combining two distinct living polymerization methods for the controlled synthesis of block copolymers is described. In the first step, bromo-terminated poly(methyl methacrylate) is prepared by atom transfer radical polymerization (ATRP). Then, a bromide end group is substituted with a triphenylmethyl (trityl) functionality under visible light irradiation using dimanganese decacarbonyl (Mn₂ (CO)₁₀ ) photochemistry. The resulting polymers with trityl end groups are used as macroiniferter for the polymerization of styrene and tert-butyl acrylate (tBA) to yield desired block copolymers with narrow molecular weight distribution. Moreover, the amphiphilic copolymers with acrylic acid functionalities are obtained by the hydrolyzation of poly(tert-butyl acrylate) containing block copolymers with trifluoroacetic acid.

Synthesis of strictly alternating copolymers by living carbanionic copolymerization of diphenylethylene with 1,3-pentadiene isomers

The living carbanionic alternating copolymerizations of 1,3-pentadiene isomers with DPE are reported, and yield well-defined alternating and highly stereoregular amorphous copolymers with controllable M_n, low Đ_M and predominantly trans-1,4 units.

Light-driven catalytic hydrogenation of carbon dioxide at low-pressure by a trinuclear iridium polyhydride complex

Under irradiation conditions, low-pressure and room-temperature hydrogenation of carbon dioxide (CO₂) has been achieved using a trinuclear iridium hexahydride complex 1.

On Demand Switching of Polymerization Mechanism and Monomer Selectivity with Orthogonal Stimuli

The development of next-generation materials is coupled with the ability to predictably and precisely synthesize polymers with well-defined structures and architectures. In this regard, the discovery of synthetic strategies that allow on demand control over monomer connectivity during polymerization would provide access to complex structures in a modular fashion and remains a grand challenge in polymer chemistry. In this Article, we report a method where monomer selectivity is controlled during the polymerization by the application of two orthogonal stimuli. Specifically, we developed a cationic polymerization where polymer chain growth is controlled by a chemical stimulus and paired it with a compatible photocontrolled radical polymerization. By alternating the application of the chemical and photochemical stimuli the incorporation of vinyl ethers and acrylates could be dictated by switching between cationic and radical polymerization mechanisms, respectively. This enables the synthesis of multiblock copolymers where each block length is governed by the amount of time a stimulus is applied, and the quantity of blocks is determined by the number of times the two stimuli are toggled. This new method allows on demand control over polymer structure with external influences and highlights the potential for using stimuli-controlled polymerizations to access novel materials.

H-bonded reusable template assisted para-selective ketonisation using soft electrophilic vinyl ethers

In nature, enzymatic pathways generate C_aryl−C(O) bonds in a site-selective fashion. Synthetically, C_aryl−C(O) bonds are synthesised in organometallic reactions using prefunctionalized substrate materials. Electrophilic routes are largely limited to electron-rich systems, non-polar medium, and multiple product formations with a limited scope of general application. Herein we disclose a directed para-selective ketonisation technique of arenes, overriding electronic bias and structural congestion, in the presence of a polar protic solvent. The concept of hard–soft interaction along with in situ activation techniques is utilised to suppress the competitive routes. Mechanistic pathways are investigated both experimentally and computationally to establish the hypothesis. Synthetic utility of the protocol is highlighted in formal synthesis of drugs, drug cores, and bioactive molecules.

Electrophilic acylation of arenes is largely limited to electron rich systems, non-polar medium and often displays moderate selectivity. Here, the authors show a directed para-selective ketonisation of arenes, overriding electronic bias and structural congestion, and apply it to the synthesis of bioactive compounds.

Block Copolymers by Mechanistic Transformation from PROAD to Iniferter Process

A facile strategy for synthesizing block copolymers by the combination of two different living polymerization techniques, namely, photoinduced radical oxidation/addition/deactivation (PROAD) and iniferter processes is described. In the first step, PROAD polymerization of isobutyl vinyl ether using bromotriphenylmethane, dimanganese decacarbonyl (Mn₂ (CO)₁₀ ), and diphenyliodonium bromide (Ph₂ I⁺ Br^- ) is carried out to yield polymers with triphenylmethyl (trityl) end groups. These prepolymers are used as macroiniferters in thermally induced free radical polymerization of vinyl monomers such as methyl methacrylate, tert-butyl acrylate, and styrene, resulting in the formation of corresponding block copolymers free from homopolymers. The precursor polymer and final block copolymers are characterized by ¹ H NMR, FT-IR, GPC, and DSC analyses.