Mild and Regioselective Hydroxylation of Methyl Group in Neocuproine: Approach to an N,O-Ligated Cu6 Cage Phenylsilsesquioxane

A Family of Hexacopper Phenylsilsesquioxane/Acetate Complexes: Synthesis, Solvent-Controlled Cage Structures, and Catalytic Activity

Convenient self-assembly synthesis of copper(II) complexes via double (phenylsilsesquioxane and acetate) ligation allows to isolate a family of impressive sandwich-like cage compounds. An intriguing feature of these complexes is the difference in the structure of a pair of silsesquioxane ligands despite identical (Cu6) nuclearity and number (four) of acetate fragments. Formation of particular combination of silsesquioxane ligands (cyclic/cyclic vs condensed/condensed vs cyclic/condensed) was found to be dependent on the synthesis/crystallization media. A combination of Si4-cyclic and Si6-condensed silsesquioxane ligands is a brand new feature of cage metallasilsesquioxanes. A representative Cu6-complex (4) (with cyclic silsesquioxanes) exhibited high catalytic activity in the oxidation of alkanes and alcohols with peroxides. Maximum yield of the products of cyclohexane oxidation attained 30 %. The compound 4 was also tested as catalyst in the Baeyer-Villiger oxidation of cyclohexanone by m-chloroperoxybenzoic acid: maximum yields of 88 % and 100 % of ϵ-caprolactone were achieved upon conventional heating at 50 °C for 4 h and MW irradiation at 70 or 80 °C during 30 min, respectively. It was also possible to obtain the lactone (up to 16 % yield) directly from the cyclohexane via a tandem oxidation/Baeyer-Villiger oxidation reaction using the same oxidant.

Cage-like Cu5Cs4-Phenylsilsesquioxanes: Synthesis, Supramolecular Structures, and Catalytic Activity

A small family of nonanuclear Cu5Cs4-based phenylsilsesquioxanes 1-2 were prepared by a convenient self-assembly approach and characterized by X-ray diffraction studies. The compounds 1 and 2 show some unprecedented structural features such as the presence of a [Ph14Si14O28]14- silsesquioxane ligand and a CuII5CsI4 nuclearity in which the metal cations occupy unusual positions within the cluster. Copper ions are "wrapped" into a silsesquioxane matrix, while cesium ions are located in external positions. This resulted in cesium-involved aggregation of coordination polymer structures. Both compounds 1 and 2 realize specific metallocene (cesium-phenyl) linkage between neighboring cages. Compound 2 is evaluated as a catalyst in the Baeyer-Villiger (B-V) oxidation of cyclohexanone and tandem cyclohexane oxidation/B-V oxidation of cyclohexanone with m-chloroperoxybenzoic acid (mCPBA) as an oxidant, in an aqueous acetonitrile medium, and HNO3 as the promoter. A quantitative yield of ε-caprolactone was achieved under conventional heating at 50 °C for 4 h or MW irradiation for 30 min (for cyclohexanone as substrate); 17 and 19% yields of lactone upon MW irradiation at 80 °C for 30 min and heating at 50 °C for 4 h, respectively (for cyclohexane as a substrate), were achieved. Complex 2 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with peroxides at 60 °C in acetonitrile. The maximum yield of cyclohexane oxidation products was 30%. Complex 2 exhibits high activity in the oxidation of alcohols.

Synthesis, Crystal Structures, and Optical and Magnetic Properties of Samarium, Terbium, and Erbium Coordination Entities Containing Mono-Substituted Imine Silsesquioxane Ligands

Mono-substituted cage-like silsesquioxanes of the T₈-type can play the role of potential ligands in the coordination chemistry. In this paper, we report on imine derivatives as ligands for samarium, terbium, and erbium cations and discuss their efficient synthesis, crystal structures, and magnetic and optical properties. X-ray analysis of the lanthanide coordination entities [MCl₃(POSS)₃]·2THF [M = Er³⁺ (3), Tb³⁺ (4), Sm³⁺ (5)] showed that all three compounds crystallize in the same space group with similar lattice parameters. All compounds contain an octahedrally coordinated metal atom, and additionally, 3 and 5 structures are strictly isomorphous. However, surprisingly, there are two different molecules in the crystal structure of the terbium coordination entity 4, monomer (sof 65%) and dimer (sof 35%), with one and two metal centers. Absorption measurements of the investigated materials recorded at 300 K showed that regardless of the lanthanide involved, their energy band gap equals 2.7 eV. Moreover, the analogues containing Tb³⁺ and Sm³⁺ exhibit luminescence typical of these rare earth ions in the visible and infrared spectral range, while the compound with Er³⁺ does not generate any emission. Direct current variable-temperature magnetic susceptibility measurements on polycrystalline samples of 3-5 were performed between 1.8 and 300 K. The magnetic properties of 3 and 4 are dominated by the crystal field effect on the Er³⁺ and Tb³⁺ ions, respectively, hiding the magnetic influence between the magnetic cations of adjacent molecules. Complex 5 exhibits a nature typical for the paramagnetism of the samarium(III) cation.

Hybrid Silsesquioxane/Benzoate Cu7-Complexes: Synthesis, Unique Cage Structure, and Catalytic Activity

A series of phenylsilsesquioxane-benzoate heptacopper complexes 1-3 were synthesized and characterized by X-ray crystallography. Two parallel routes of toluene spontaneous oxidation (into benzyl alcohol and benzoate) assisted the formation of the cagelike structure 1. A unique multi-ligation of copper ions (from (i) silsesquioxane, (ii) benzoate, (iii) benzyl alcohol, (iv) pyridine, (v) dimethyl-formamide and (vi) water ligands) was found in 1. Directed self-assembly using benzoic acid as a reactant afforded complexes 2-3 with the same main structural features as for 1, namely heptanuclear core coordinated by (i) two distorted pentameric cyclic silsesquioxane and (ii) four benzoate ligands, but featuring other solvate surroundings. Complex 3 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with hydrogen peroxide and tert-butyl hydroperoxide, respectively, at 50 °C in acetonitrile. The maximum yield of cyclohexane oxidation products as high as 32% was attained. The oxidation reaction results in a mixture of cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone. Upon the addition of triphenylphosphine, the cyclohexyl hydroperoxide is completely converted to cyclohexanol. The specific regio- and chemoselectivity in the oxidation of n-heptane and methylcyclohexane, respectively, indicate the involvement of of hydroxyl radicals. Complex 3 exhibits a high activity in the oxidation of alcohols.

A Novel Family of Cage-like (CuLi, CuNa, CuK)-phenylsilsesquioxane Complexes with 8-hydroxyquinoline Ligands: Synthesis, Structure, and Catalytic Activity

The first examples of metallasilsesquioxane complexes, including ligands of the 8-hydroxyquinoline family 1–9, were synthesized, and their structures were established by single crystal X-ray diffraction using synchrotron radiation. Compounds 1–9 tend to form a type of sandwich-like cage of Cu₄M₂ nuclearity (M = Li, Na, K). Each complex includes two cisoid pentameric silsesquioxane ligands and two 8-hydroxyquinoline ligands. The latter coordinates the copper ions and corresponding alkaline metal ions (via the deprotonated oxygen site). A characteristic (size) of the alkaline metal ion and a variation of characteristics of nitrogen ligands (8-hydroxyquinoline vs. 5-chloro-8-hydroxyquinoline vs. 5,7-dibromo-8-hydroxyquinoline vs. 5,7-diiodo-8-hydroxyquinoline) are highly influential for the formation of the supramolecular structure of the complexes 3a, 5, and 7–9. The Cu₆Na₂-based compound 2 exhibits high catalytic activity towards the oxidation of (i) hydrocarbons by H₂O₂ activated with HNO₃, and (ii) alcohols by tert-butyl hydroperoxide. Studies of kinetics and their selectivity has led us to conclude that it is the hydroxyl radicals that play a crucial role in this process.

A Carbonate-Templated Decanuclear Mn Nanocage with Two Different Silsesquioxane Ligands

The mild reaction of the preorganized silsesquioxane precursor with Mn(II) acetate under ambient conditions results in a mixed-valent {Mn^II₆Mn^III₄} nanocage (SD/Mn10) which is protected by both acyclic trimer [Si3] and cyclic tetramer [Si4]. Serendipitous capture of atmospheric CO₂ as a μ₅-carbonate anion placed at the center supports the formation of the cluster. The magnetic analysis reveals the strong antiferromagnetic interactions between Mn ions. Moreover, the drop-casting film of SD/Mn10 shows photoelectric activity indicating its great potential as a semiconductor for photoelectric conversion applications.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity

This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu₆ cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu₈-based (6 and 7) and Cu₆-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu₆ cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C₅-C₈ cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

Oxidation of Organic Compounds with Peroxides Catalyzed by Polynuclear Metal Compounds

The review describes articles that provide data on the synthesis and study of the properties of catalysts for the oxidation of alkanes, olefins, and alcohols. These catalysts are polynuclear complexes of iron, copper, osmium, nickel, manganese, cobalt, vanadium. Such complexes for example are: [Fe2(HPTB)(m-OH)(NO3)2](NO3)2·CH3OH·2H2O, where HPTB-¼N,N,N0,N0-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane; complex [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2, where dppm-1,1-bis(diphenylphosphino)methane; (2,3-η-1,4-diphenylbut-2-en-1,4-dione)undecacarbonyl triangulotriosmium; phenylsilsesquioxane [(PhSiO1.5)10(CoO)5(NaOH)]; bi- and tri-nuclear oxidovanadium(V) complexes [{VO(OEt)(EtOH)}2(L2)] and [{VO(OMe)(H2O)}3(L3)]·2H2O (L2 = bis(2-hydroxybenzylidene)terephthalohydrazide and L3 = tris(2-hydroxybenzylidene)benzene-1,3,5-tricarbohydrazide); [Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane). For comparison, articles are introduced describing catalysts for the oxidation of alkanes and alcohols with peroxides, which are simple metal salts or mononuclear metal complexes. In many cases, polynuclear complexes exhibit higher activity compared to mononuclear complexes and exhibit increased regioselectivity, for example, in the oxidation of linear alkanes. The review contains a description of some of the mechanisms of catalytic reactions. Additionally presented are articles comparing the rates of oxidation of solvents and substrates under oxidizing conditions for various catalyst structures, which allows researchers to conclude about the nature of the oxidizing species. This review is focused on recent works, as well as review articles and own original studies of the authors.

Mono-substituted cage-like silsesquioxanes bound by trifunctional acyl chloride as a multi-donor N,O-type ligand in copper(ii) coordination chemistry: synthesis and structural properties

In this paper, we report on the synthesis of novel copper(ii) complexes containing a multi-donor N,O-type ligand based on mono-substituted cage-like silsesquioxanes bound by trifunctional acyl chloride.

Coordination Affinity of Cu(II)-Based Silsesquioxanes toward N,N-Ligands and Associated Skeletal Rearrangements: Cage and Ionic Products Exhibiting a High Catalytic Activity in Oxidation Reactions

An unusual skeletal rearrangement of piperazine into ethylenediamine has been observed for the first time as a result of an attempt to synthesize a piperazine-linked metal-organic framework (MOF) using cage Cu(II),Na-phenylsilsequixane as a potential building block. Instead of the expected "metallasilsesquioxane-based MOF", a Cu₆ complex 1 coordinated both by silsesquioxane and ethylenediamine ligands was isolated. An effort to reproduce this result via direct interaction of Cu-phenylsilsequioxane and ethylenediamine surprisingly afforded two other types of complexes, copper-sodium 2 and copper 3 ionic products. Cationic components in both products 2 and 3 are represented by (i) copper and sodium ions (in the case of 2) or (ii) copper ions exclusively (in the case of 3) coordinated by ethylenediamine ligands. Both complexes 2 and 3 include Si₆-based condensed silsesquioxane fragments serving as anionic components of the products. Symptomatically, the types of the Si₆-frameworks in 2 and 3 are drastically different. More specifically, the Si₆ unit in 2 is an unprecedented distorted silsesquioxane skeleton consisting of two condensed tetramembered rings. Structural features of compounds 1-3 were established by single crystal X-ray diffraction. Compound 2 was found to catalyze the oxidation of cyclohexane to cyclohexanol and cyclohexanone with H₂O₂ (a mixture of these products was obtained after adding PPh₃ to the reaction solution) as well as the transformation of cyclohexanol to cyclohexanone under the action of tert-butyl hydroperoxide.

Metal Complexes Containing Redox-Active Ligands in Oxidation of Hydrocarbons and Alcohols: A Review

Ligands are innocent when they allow oxidation states of the central atoms to be defined. A noninnocent (or redox) ligand is a ligand in a metal complex where the oxidation state is not clear. Dioxygen can be a noninnocent species, since it exists in two oxidation states, i.e., superoxide (O2−) and peroxide (O22−). This review is devoted to oxidations of C–H compounds (saturated and aromatic hydrocarbons) and alcohols with peroxides (hydrogen peroxide, tert-butyl hydroperoxide) catalyzed by complexes of transition and nontransition metals containing innocent and noninnocent ligands. In many cases, the oxidation is induced by hydroxyl radicals. The mechanisms of the formation of hydroxyl radicals from H2O2 under the action of transition (iron, copper, vanadium, rhenium, etc.) and nontransition (aluminum, gallium, bismuth, etc.) metal ions are discussed. It has been demonstrated that the participation of the second hydrogen peroxide molecule leads to the rapture of O–O bond, and, as a result, to the facilitation of hydroxyl radical generation. The oxidation of alkanes induced by hydroxyl radicals leads to the formation of relatively unstable alkyl hydroperoxides. The data on regioselectivity in alkane oxidation allowed us to identify an oxidizing species generated in the decomposition of hydrogen peroxide: (hydroxyl radical or another species). The values of the ratio-of-rate constants of the interaction between an oxidizing species and solvent acetonitrile or alkane gives either the kinetic support for the nature of the oxidizing species or establishes the mechanism of the induction of oxidation catalyzed by a concrete compound. In the case of a bulky catalyst molecule, the ratio of hydroxyl radical attack rates upon the acetonitrile molecule and alkane becomes higher. This can be expanded if we assume that the reactions of hydroxyl radicals occur in a cavity inside a voluminous catalyst molecule, where the ratio of the local concentrations of acetonitrile and alkane is higher than in the whole reaction volume. The works of the authors of this review in this field are described in more detail herein.

New Cu4Na4- and Cu5-Based Phenylsilsesquioxanes. Synthesis via Complexation with 1,10-Phenanthroline, Structures and High Catalytic Activity in Alkane Oxidations with Peroxides in Acetonitrile

Self-assembly of copper(II)phenylsilsesquioxane assisted by the use of 1,10-phenanthroline (phen) results in isolation of two unusual cage-like compounds: (PhSiO1,5)12(CuO)4(NaO0.5)4(phen)4 1 and (PhSiO1,5)6(PhSiO1,5)7(HO0.5)2(CuO)5(O0.25)2(phen)3 2. X-Ray diffraction study revealed extraordinaire molecular architectures of both products. Namely, complex 1 includes single cyclic (PhSiO1,5)12 silsesquioxane ligand. Four sodium ions of 1 are additionally ligated by 1,10-phenanthrolines. In turn, “sodium-less” complex 2 represents coordination of 1,10-phenanthrolines to copper ions. Two silsesquioxane ligands of 2 are: (i) noncondensed cubane of a rare Si6-type and (ii) unprecedented Si7-based ligand including two HOSiO1.5 fragments. These silanol units were formed due to removal of phenyl groups from silicon atoms, observed in mild conditions. The presence of phenanthroline ligands in products 1 and 2 favored the π–π stacking interactions between neighboring cages. Noticeable that in the case of 1 all four phenanthrolines participated in such supramolecular organization, unlike to complex 2 where one of the three phenanthrolines is not “supramolecularly active”. Complexes 1 and 2 were found to be very efficient precatalysts in oxidations with hydroperoxides. A new method for the determination of the participation of hydroxyl radicals has been developed.

Space Craft-like Octanuclear Co(II)-Silsesquioxane Nanocages: Synthesis, Structure, Magnetic Properties, Solution Behavior, and Catalytic Activity for Hydroboration of Ketones

Two novel space craft-like octanuclear Co(II)-silsesquioxane nanocages, {Co₈[(MeSiO₂)₄]₂(dmpz)₈} (SD/Co8a) and {Co₈[(PhSiO₂)₄]₂(dmpz)₈} (SD/Co8b) (SD = SunDi; Hdmpz = 3,5-dimethylpyrazole), have been constructed from two similar multidentate silsesquioxane ligands assisted with a pyrazole ligand. The Co₈ skeleton consists of eight tetrahedral Co(II) ions arranged in a ring and is further capped by two (MeSiO₂)₄ ligands up and down. The auxiliary dmpz^- ligands seal the ring finally. Electrospray ionization mass spectrometry revealed SD/Co8a and SD/Co8b are highly stable in CH₂Cl₂. Magnetic analysis implies that SD/Co8a announces antiferromagnetic interactions between Co(II) ions. Moreover, both of them display good homogeneous catalytic activity for hydroboration of ketones in the presence of pinacolborane under mild conditions.

Palanquin-Like Cu4Na4 Silsesquioxane Synthesis (via Oxidation of 1,1-bis(Diphenylphosphino)methane), Structure and Catalytic Activity in Alkane or Alcohol Oxidation with Peroxides

The self-assembly synthesis of copper-sodium phenylsilsesquioxane in the presence of 1,1-bis(diphenylphosphino)methane (dppm) results in an unprecedented cage-like product: [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2 1. The most intriguing feature of the complex 1 is the presence of two oxidized dppm species that act as additional O-ligands for sodium ions. Two cyclic phenylsiloxanolate (PhSiO1,5)6 ligands coordinate in a sandwich manner with the copper(II)-containing layer of the cage. The structure of 1 was established by X-ray diffraction analysis. Complex 1 was shown to be a very good catalyst in the oxidation of alkanes and alcohols with hydrogen peroxide or tert-butyl hydroperoxide in acetonitrile solution. Thus, cyclohexane (CyH), was transformed into cyclohexyl hydroperoxide (CyOOH), which could be easily reduced by PPh3 to afford stable cyclohexanol with a yield of 26% (turnover number (TON) = 240) based on the starting cyclohexane. 1-Phenylethanol was oxidized by tert-butyl hydroperoxide to give acetophenone in an almost quantitative yield. The selectivity parameters of the oxidation of normal and branched alkanes led to the conclusion that the peroxides H2O2 and tert-BuOOH, under the action of compound (1), decompose to generate the radicals HO• and tert-BuO• which attack the C-H bonds of the substrate.

Catalytic Activity of Polynuclear vs. Dinuclear Aroylhydrazone Cu(II) Complexes in Microwave-Assisted Oxidation of Neat Aliphatic and Aromatic Hydrocarbons

One-dimensional (1D) polynuclear Cu(II) complex (1) derived from (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H₂L) is synthesized and characterized by elemental analysis, IR spectroscopy, ESI-MS, and single crystal X-ray crystallography. Its catalytic performance towards the solvent-free microwave-assisted peroxidative oxidation of aliphatic and aromatic hydrocarbons under mild conditions is compared with that of dinuclear Cu(II) complexes (2 and 3) of the same ligand, previously reported as antiproliferative agents. Polymer 1 exhibits the highest activity, either for the oxidation of cyclohexane (leading to overall yields, based on the alkane, of up to 39% of cyclohexanol and cyclohexanone) or towards the oxidation of toluene (selectively affording benzaldehyde up to a 44% yield), after 2 or 2.5 h of irradiation at 80 or 50 °C, respectively.

High-Cluster (Cu9) Cage Silsesquioxanes: Synthesis, Structure, and Catalytic Activity

Unusual high-cluster (Cu₉) cage phenylsilsesquioxanes were obtained via complexation of in situ Cu^II,Na-silsesquioxane species formed with phenanthroline and neocuproine. In the first case, phenanthroline, acting as "a silent ligand" (not participating in the composition of the final product), favors the formation of an unprecedented cagelike phenylsilsesquioxane of Cu₉Na₆ nuclearity, 1. In the second case, neocuproine ligands withdraws two Cu ions from the metallasilsesquioxane matrix, producing two cationic fragments Cu⁺(neocuproine)₂. The remaining metallasilsesquioxane is rearranged into an anionic cage of Cu₉Na₄ nuclearity, finalizing the formation of a specific ionic complex, 2. The impressive molecular architecture of both types of complexes, e.g., the presence of different (cyclic/acyclic) types of silsesquioxane ligands, was established by single-crystal X-ray diffraction studies. Compound 1 was revealed to be highly active in the oxidative amidation of benzylic alcohol and the catalyst loading could be reduced down to 100 ppm of Cu. Catalytic studies of compound 1 demonstrated its high activity in hydroperoxidation of alkanes with H₂O₂ and oxidation of alcohols to ketones with tert-BuOOH.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.