Electrocatalytic Reduction of CO2 into Formate with Glassy Carbon Modified by [Fe4N(CO)11(PPh2Ph-linker)]−

Fast and Versatile Functionalization of Glassy Carbon

A rapid procedure for the functionalization of glassy carbon surfaces (GCSs) is disclosed. A three-step sequence of bromomethylation, azide displacement, and copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) allows ethynylated molecules to be attached covalently to the carbon surface through a methylene functional group. Redox-active ethynyl ferrocene and [Ru^II(Cl)(DMSO)(ethynyl-TPA)]¹⁺ (DMSO = dimethylsulfoxide; TPA = tris(2-pyridylmethyl)amine) are attached with high coverages as assessed by cyclic voltammetry, and the elemental composition of the surface is confirmed by X-ray photoelectron spectroscopy. In less than 1 h, surface coverages of 1 × 10¹⁴ molecules/cm² are possible that exhibit good durability in both acidic and basic media. Attached [Ru^II(Cl)(DMSO)(ethynyl-TPA)]¹⁺ catalytically oxidizes alcohols, yet the currents and potentials are less impressive compared to an attachment without the intervening methylene group. The advantages of this covalent attachment procedure for GCSs are its short reaction times, mild reaction conditions, and the use of standard laboratory reagents and glassware, allowing for many types of ethynylated molecules to be attached rapidly to the surface.

Photocatalytic turnover of CO2 under visible light by [Re(CO)3(1-(1,10) phenanthroline-5-(4-nitro-naphthalimide))Cl] in tandem with the sacrificial donor BIH

Optimized photocatalytic conversion of CO₂ requires new potent catalysts that can absorb visible light. The photocatalytic reduction of CO₂ using rhenium(i) has been demonstrated but suffers from low turnover. Herein, we describe a [Re(CO)₃(1-(1,10)phenanthroline-5-(4-nitro-naphthalimide))Cl] photocatalyst, which when combined with the sacrificial donor 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole, results in selective production of formic acid and a high turnover number of 533 and turnover frequency of 356 h⁻¹. Single-crystal X-ray diffraction and DFT studies are also discussed.

Rhenium based photocatalytic conversion CO₂ to formate in the visible region with excellent turnover.

Metal carbonyl clusters of groups 8-10: synthesis and catalysis

In this review article, we discuss advances in the chemistry of metal carbonyl clusters (MCCs) spanning the last three decades, with an emphasis on the more recent reports and those involving groups 8-10 elements. Synthetic methods have advanced and been refined, leading to higher-nuclearity clusters and a wider array of structures and nuclearities. Our understanding of the electronic structure in MCCs has advanced to a point where molecular chemistry tools and other advanced tools can probe their properties at a level of detail that surpasses that possible with other nanomaterials and solid-state materials. MCCs therefore advance our understanding of structure-property-reactivity correlations in other higher-nuclearity materials. With respect to catalysis, this article focuses only on homogeneous applications, but it includes both thermally and electrochemically driven catalysis. Applications in thermally driven catalysis have found success where the reaction conditions stabilise the compounds toward loss of CO. In more recent years, MCCs, which exhibit delocalised bonding and possess many electron-withdrawing CO ligands, have emerged as very stable and effective for reductive electrocatalysis reactions since reduction often strengthens M-C(O) bonds and since room-temperature reaction conditions are sufficient for driving the electrocatalysis.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Design of robust 2,2'-bipyridine ligand linkers for the stable immobilization of molecular catalysts on silicon(111) surfaces

The attachment of the 2,2'-bipyridine (bpy) moieties to the surface of planar silicon(111) (photo)electrodes was investigated using ab initio simulations performed on a new cluster model for methyl-terminated silicon. Density functional theory (B3LYP) with implicit solvation techniques indicated that adventitious chlorine atoms, when present in the organic linker backbone, led to instability at very negative potentials of the surface-modified electrode. In prior experimental work, chlorine atoms were present as a trace surface impurity due to required surface processing chemistry, and thus could plausibly result in the observed surface instability of the linker. Free energy calculations for the Cl-atom release process with model silyl-linker constructs revealed a modest barrier (14.9 kcal mol-1) that decreased as the electrode potential became more negative. A small library of new bpy-derived structures has additionally been explored computationally to identify strategies that could minimize chlorine-induced linker instability. Structures with fluorine substituents are predicted to be more stable than their chlorine analogues, whereas fully non-halogenated structures are predicted to exhibit the highest stability. The behavior of a hydrogen-evolving molecular catalyst Cp*Rh(bpy) (Cp* = pentamethylcyclopentadienyl) immobilized on a silicon(111) cluster was explored theoretically to evaluate differences between the homogeneous and surface-attached behavior of this species in a tautomerization reaction observed under reductive conditions for catalytic H2 evolution. The calculated free energy difference between the tautomers is small, hence the results suggest that use of reductively stable linkers can enable robust attachment of catalysts while maintaining chemical behavior on the electrode similar to that exhibited in homogeneous solution.

Pentanuclear Scaffold: A Molecular Platform for Small-Molecule Conversions

Small-molecule conversions involving multielectron transfer processes enable the conversion of earth-abundant materials into valuable chemicals and are regarded as a solution for environmental and energy shortage problems. In this context, the development of artificial catalysts that promote these reactions is an important research target. In nature, metalloenzymes that contain multinuclear metal complexes as active sites are known to efficiently catalyze reactions under mild conditions. Therefore, using multinuclear metal complexes as artificial catalysts can be an attractive strategy for small-molecule conversions involving multielectron transfer processes. However, multinuclear-metal-complex-based catalysts for these reactions have not been well established. In this Account, we describe our recent advances in the development of multinuclear metal complexes as catalysts for small-molecule conversion, mainly focusing on water oxidation. As small-molecule conversions involving multielectron transfer processes consists of two essential processes, (1) the transfer of multiple electrons and (2) the formation/cleavage of covalent bond(s), catalysts for these reactions should facilitate both steps. Therefore, we assumed that the assembly of redox-active metal ions and the cooperative effect of neighboring coordinatively unsaturated metal ions can promote these processes. On the basis of this assumption, we employed a pentanuclear metal complex as a molecular scaffold for the catalyst. The scaffold has a pentanuclear structure with quasi-D₃ symmetry and consists of a [M₃(μ₃-X)] core (X = O^2- or OH^-) wrapped by two [M(μ-bpp)₃] units (Hbpp = 3,5-bis(2-pyridyl)pyrazole). The metal ions in the triangular core are coordinatively unsaturated, whereas the metal ions at the apical positions are coordinatively saturated. In other words, the pentanuclear scaffold possesses multiple redox-active centers and coordinatively unsaturated sites. It should also be noted that the electron transfer ability of the complex changes dramatically depending on the identity of the constituent metal ions. The iron derivative of the pentanuclear scaffold was found to serve as an electrocatalyst for water oxidation (2H₂O → O₂ + 4e^- + 4H⁺) with a high reaction rate and excellent robustness. The substitution of metal ions in the pentanuclear scaffold to cobalt ions resulted in the development of a catalyst for CO₂ reduction. Furthermore, we investigated the effect of substituents on the ligands of the pentanuclear iron complex and succeeded in precisely manipulating the electron transfer possess. These results clearly demonstrate that the pentanuclear scaffold is an attractive platform for catalysts for small-molecule conversions. Additionally, the intrinsic features of the multinuclear catalytic system, which are totally different from those of conventional mononuclear-metal-complex-based catalysts, are disclosed. In reactions mediated by multinuclear complexes, the multinuclear core can initially accumulate the charge required for catalysis to reach the catalytically active state. Subsequently, the catalyst in the active state reacts with the substrate, initiating electron transfer to the substrate and rearrangement of covalent bonds in the substrate to afford the product. In such a mechanism, the desired number of electrons can be transferred to the substrates in an on-demand fashion, and the formation of undesired chemical species in the targeted catalysis may be prevented. This feature of multinuclear-metal-complex-based catalysts will achieve demanding small-molecule conversions with a high reaction rate, selectivity, and durability.

Effect of metal ion substitution on the catalytic activity of a pentanuclear metal complex

A pentanuclear cobalt complex that consists of five cobalt ions and six bpp⁻ ligands (Co5, Hbpp = 3,5-bis(2-pyridyl)pyrazole) was newly developed. The obtained complex can catalyze CO₂ reduction under electrochemical and photochemical conditions.