Synthesis and Catalytic Activity of Iron Hydride Ligated with Bidentate N-Heterocyclic Silylenes for Hydroboration of Carbonyl Compounds

De- and Rearomatisation of Pyridine in Silylene Chemistry

Traditional methods relying on metal-ligand cooperation for activating pyridine bonds in de- and rearomatisation are being challenged by the abundant metal-free element species as alternatives. Here, we investigated the de/re-aromatisation of pyridine facilitated by pyridylamino-functionalised silylene reactions with ketones and ketene. The reactivity outcome is highly dependent on the substituents on the ketones. By carefully tuning the steric demand of the ketone, each intermediate of the reaction sequence could be isolated. At room temperature, benzophenone and acetophenone substrates led to dearomatisation of the pyridine moiety, with the case of acetophenone showing an intermediate silaoxirane preceding dearomatisation. However, when subjected to acetone or diphenylketene, only silaoxiranes were formed without dearomatisation of the pyridine moiety. Notably, only benzophenone-derived dearomatised species demonstrated rearomatisation upon heating. Furthermore, the reduced steric bulk of the ketene facilitated further ring expansion with another equivalent of the substrate, forming sila-1,3-dioxolanes. Both steric hindrance and aromatic groups collectively influence the dearomatisation of pyridine in pyridylaminosilylene reactions.

Air-Stable Iron(III) Salen Complexes for Selective Hydroboration of Ketones and Unactivated Imines without Base Activation

Herein, we designed and synthesized a series of air-stable, cost-effective, and readily synthesizable iron(III) salen complexes (Fe-1 and Fe-2) for facilitating the selective hydroboration of ketones and unactivated imines with pinacolborane in the absence of any additive. These catalyst systems exhibited good yields, chemoselectivity, high atom economy, and a broad substrate scope under mild reaction conditions with a minimal catalyst loading of 0.2 mol %. The catalytic efficiency of Fe-1 has been demonstrated through the hydroboration of diverse aromatic, aliphatic, and heterocyclic ketones and imines with a turnover number of up to 1000, highlighting its broad substrate scope. Ketones are chemoselectively hydroborated over other functional groups such as imines, alkenes, esters, nitriles, acids, and alcohols. Besides, the synthetic utility of this strategy has also been showcased by the construction of a natural chiral monoterpenoid carveol. This protocol can be readily scaled up for gram-scale synthesis of alcohols, which underscores the potential industrial applicability of our catalyst system in the synthesis of secondary alcohols on a larger scale.

Applications of low-valent compounds with heavy group-14 elements

Over the last two decades, the low-valent compounds of group-14 elements have received significant attention in several fields of chemistry owing to their unique electronic properties. The low-valent group-14 species include tetrylenes, tetryliumylidene, tetrylones, dimetallenes and dimetallynes. These low-valent group-14 species have shown applications in various areas such as organic transformations (hydroboration, cyanosilylation, N-functionalisation of amines, and hydroamination), small molecule activation (e.g. P4, As4, CO2, CO, H2, alkene, and alkyne) and materials. This review presents an in-depth discussion on low-valent group-14 species-catalyzed reactions, including polymerization of rac-lactide, L-lactide, DL-lactide, and caprolactone, followed by their photophysical properties (phosphorescence and fluorescence), thin film deposition (atomic layer deposition and vapor phase deposition), and medicinal applications. This review concisely summarizes current developments of low-valent heavier group-14 compounds, covering synthetic methodologies, structural aspects, and their applications in various fields of chemistry. Finally, their opportunities and challenges are examined and emphasized.

Polydentate Amidinato-Silylenes, -Germylenes and -Stannylenes

This review article focuses on amidinatotetrylenes that potentially can (or have already shown to) behave as bi- or tridentate ligands because they contain at least one amidinatotetrylene moiety (silylene, germylene or stannylene) and one (or more) additional coordinable fragment(s). Currently, they are being widely used as ligands in coordination chemistry, small molecule activation and catalysis. This review classifies those that have been isolated as transition metal-free compounds into five families that differ in the position(s) of the donor group(s) (D) on the amidinatotetrylene moiety, namely: ED{R1NC(R2)NR1}, EX{DNC(R2)NR1}, EX{R1NC(D)NR1}, EX{DNC(R2)ND} and E{R1NC(R2)ND}2 (E=Si, Ge or Sn). Those that do not exist as transition metal-free compounds but have been observed as ligands in transition metal complexes are cyclometallated and ring-opened amidinatotetrylene ligands. This article presents schematic descriptions of their structures, the approaches used for their syntheses and a quick overview of their involvement (as ligands) in transition metal-catalysed reactions. The literature is covered up to the end of 2023.

Amidinatotetrylenes Donor Functionalized on Both N Atoms: Structures and Coordination Chemistry

E(hmds)(bqfam) (E = Ge (1a), Sn (1b); hmds = N(SiMe3)2, bqfam = N,N'-bis(quinol-8-yl)formamidinate), which are amidinatotetrylenes equipped with quinol-8-yl fragments on the amidinate N atoms, have been synthesized from the formamidine Hbqfam and Ge(hmds)2 or SnCl(hmds). Both 1a and 1b are fluxional in solution at room temperature, as the E atom oscillates from being attached to the two amidinate N atoms to being chelated by an amidinate N atom and its closest quinolyl N atom (both situations are similarly stable according to density functional theory calculations). The hmds group of 1a and 1b is still reactive and the deprotonation of another equivalent of Hbqfam can be achieved, allowing the formation of the homoleptic derivatives E(bqfam)2 (E = Ge, Sn). The reactions of 1a and 1b with [AuCl(tht)] (tht = tetrahydrothiophene), [PdCl2(MeCN)2], [PtCl2(cod)] (cod = cycloocta-1,5-diene), [Ru3(CO)12] and [Co2(CO)8] have been investigated. The gold(I) complexes [AuCl{κE-E(hmds)(bqfam)}] (E = Ge, Sn) have a monodentate κE-tetrylene ligand and display fluxional behavior in solution the same as that of 1a and 1b. However, the palladium(II) and platinum(II) complexes [MCl{κ3E,N,N'-ECl(hmds)(bqfam)}] (M = Pd, Pt; E = Ge, Sn) contain a κ3E,N,N'-chloridotetryl ligand that arises from the insertion of the tetrylene E atom into an M-Cl bond and the coordination of an amidinate N atom and its closest quinolyl N atom to the metal center. Finally, the binuclear ruthenium(0) and cobalt(0) complexes [Ru2{μE-κ3E,N,N'-E(hmds)(bqfam)}(CO)6] and [Co2{μE-κ3E,N,N'-E(hmds)(bqfam)}(μ-CO)(CO)4] (E = Ge, Sn) have a related κ3E,N,N'-tetrylene ligand that bridges two metal atoms through the E atom. For the κ3E,N,N'-metal complexes, the quinolyl fragment not attached to the metal is pendant in all the germanium compounds but, for the tin derivatives, is attached to (in the Pd and Pt complexes) or may interact with (in the Ru2 and Co2 complexes) the tin atom.

Diverse Reactions of Formazanate/Formazan with Tetrylenes: Reduction, C-H Bond Activation, Substitution and Addition

The reactivity of the formazanate potassium salt [LtBu K(thf)] (LtBu= PhNNC(4-t BuPh)NNPh) with the group 14 chlorotetrylenes [{PhC(t BuN)2 }ECl] (E=Si, Ge, Sn) was investigated. Three corresponding compounds with unique configurations were formed, demonstrating the diverse reactivity of the system. In addition to the anticipated salt metathesis reactions of the potassium salt with the chlorine function of tetrylenes, unexpected reduction/insertion steps into the N=N bond of the formazanate (Si, Ge) and subsequent C-H activation (Ge) were also observed. Furthermore, when the neutral formazan ligand [LtBu H] was exposed to silylenes [{PhC(t BuN)2 }SiCl] and [LPh SiNMePy], substitution and addition reactions occurred. These discoveries significantly enrich the diversity of formazanate/formazan redox chemistry, opening up new avenues for exploration in this field.

Synthesis and Some Coordination Chemistry of Phosphane-Difunctionalized Bis(amidinato)-Heavier Tetrylenes: A Previously Unknown Class of PEP Tetrylenes (E = Ge and Sn)

The bis(amidinato)-heavier tetrylenes E(bzamP)2 (E = Ge (2a) and Sn (2b); bzamP = N-isopropyl-N'-(diphenylphosphanylethyl)benzamidinate), which are equipped with one heavier tetrylene (germylene or stannylene) and two phosphane fragments (one on each amidinate moiety) as coordinable groups, have been synthesized from the benzamidinum salt [H2bzamP]Cl and GeCl2(dioxane) or SnCl2 in 2:1 mol ratio. A preliminary inspection of their coordination chemistry has shown that their amidinate group can also be involved in the bonding with the metal atoms as tridentate ENP and tetradentate PENP' coordination modes have been observed for the ECl(bzamP)2 ligand of [Ir{κ3E,N,P-ECl(bzamP)2}(cod)] (E = Ge (3a) and Sn (3b); cod = η4-1,5-cyclooctadiene) and the E(bzamP)2 ligand of [Ni{κ4E,N,P,P'-E(bzamP)2}] (E = Ge (4a) and Sn (4b)), which are products of reactions of 2a and 2b with [IrCl(cod)]2 (1:0.5 mol ratio) and [Ni(cod)2] (1:1 mol ratio), respectively. These products contain a 5-membered NCNEM ring that results from the insertion of the metal M atom into an E-N bond of 2a and 2b. Additionally, while iridium(I) complexes 3a and 3b are chloridotetryl derivatives (insertion of the tetrylene E atom into the Ir-Cl bond has also occurred) that have an uncoordinated phosphane group, nickel(0) complexes 4a and 4b contain a tetrylene fragment that, maintaining the lone pair, behaves as a σ-acceptor (Z-type) ligand.

A metal-organic framework-supported dinuclear iron catalyst for hydroboration of carbonyl compounds

Preparation of catalytically active dinuclear transition metal complexes with an open coordination sphere is a challenging task because the metal sites tend to be "saturated" with excess donor atoms around during synthesis. By isolating the binding scaffolds with the metal-organic framework (MOF) skeleton and installing metal sites through post-synthetic modification, we succeed in constructing a MOF-supported metal catalyst, namely FICN-7-Fe2, with dinuclear Fe₂ sites. FICN-7-Fe2 effectively catalyses the hydroboration of a broad range of ketone, aldehyde, and imine substrates with a low loading of 0.05 mol%. Remarkably, kinetic measurements showed that FICN-7-Fe2 is 15 times more active than its mononuclear counterpart FICN-7-Fe1, indicating that cooperative substrate activation on the two Fe centres significantly enhances the catalysis.

Effects of silylene ligands on the performance of carbonyl hydrosilylation catalyzed by cobalt phosphine complexes

In order to study the effects of silylene ligands on the catalytic activity of carbonyl hydrosilylation catalyzed by cobalt phosphine complexes, readily available model catalysts are required. In this contribution, a comparative study of the hydrosilylation of aldehydes and ketones catalyzed by tris(trimethylphosphine) cobalt chloride, CoCl(PMe₃)₃ (1), and bis(silylene) cobalt chloride, Co(LSi:)₂(PMe₃)₂Cl (2, LSi: = {PhC(N^tBu)₂}SiCl), is presented. It was found that both complexes 1 and 2 are good catalysts for the hydrosilylation of aldehydes and ketones under mild conditions. This catalytic system has a broad substrate scope and selectivity for multi-functional substrates. Silylene complex 2 shows higher activity than complex 1, bearing phosphine ligands, for aldehydes, but conversely, for ketones, the activity of complex 1 is higher than that of complex 2. It is worth noting that in the process of mechanistic studies the intermediates (PMe₃)₃Co(H)(Cl)(PhH₂Si) (3) and (LSi:)₂(PMe₃)Co(H)(Cl)(PhH₂Si) (4) were isolated from the stoichiometric reactions of 1 and 2 with phenylsilane, respectively. Further experiments confirmed that complex 3 is a real intermediate. A possible catalytic mechanism for the hydrosilylation of carbonyl compounds catalyzed by 1 was proposed based on the experimental investigation and literature reports, and this mechanism was further supported by DFT studies. The bis(silylene) complex 4 showed complicated behavior in solution. A series of experiments were designed to study the catalytic mechanism for the hydrosilylation of carbonyl compounds catalyzed by complex 2. According to the experimental results, the hydrosilylation of aldehydes catalyzed by 1 proceeds via a different mechanism than that of the analogous reaction with complex 2 as the catalyst. In the case of ketones, complex 4 is a real intermediate, indicating that both 1 and 2 catalyze the reaction by the same mechanism. The molecular structures of 3 and 4 were determined by single crystal X-ray diffraction analysis.

Manganese Salan Complexes as Catalysts for Hydrosilylation of Aldehydes and Ketones

Manganese has attracted significant recent attention due to its abundance, low toxicity, and versatility in catalysis. In the present study, a series of manganese (III) complexes supported by salan ligands have been synthesized and characterized, and their activity as catalysts in the hydrosilylation of carbonyl compounds was examined. While manganese (III) chloride complexes exhibited minimal catalytic efficacy without activation of silver perchlorate, manganese (III) azide complexes showed good activity in the hydrosilylation of carbonyl compounds. Under optimized reaction conditions, several types of aldehydes and ketones could be reduced with good yields and tolerance to a variety of functional groups. The possible mechanisms of silane activation and hydrosilylation were discussed in light of relevant experimental observations.

Reactivity of Pt(0) bromosilylene complexes towards ethylene

The base-free carbazolyl bromosilylene RSiBr (R = 1,8-bis(3,5-di-tert-butyl-phenyl)-3,6-di-tert-butyl-carbazolyl) reacts with (η²-C₂H₄)Pt(PPh₃)₂ and Pt(PCy₃)₂ to form platinasilacyclobutane R(Br)Si(C₂H₄)Pt(PPh₃)₂ (1) and silylene platinum complex R(Br)SiPt(PCy₃)₂ (2), respectively. When silylene complex 2 is treated with C₂H₄, the six-membered metallasilacycle R(Br)Si(C₂H₄)₂Pt(PCy₃)₂ (3) is obtained. All compounds are characterised by XRD and multinuclear NMR spectroscopy.

Zn-Catalyzed Regioselective and Chemoselective Reduction of Aldehydes, Ketones and Imines

An operationally convenient Zn-catalyzed synthesis of alcohols by the reduction of aldehydes, ketones, and α,β-unsaturated aldehydes/ketones is reported. It is a rare example of using mild and sustainable HBpin as a reductant for catalytic reduction of carbonyl compounds in the absence of acid or base as hydrolysis reagent. The reaction is upscalable and proceeds in high selectivity without the formation of boronate ester by-products, and tolerates sensitive functionalities, such as iodo, bromo, chloro, fluoro, nitro, trifluoromethyl, aminomethyl, alkynyl, and amide. The Zn(OAc)₂/HBpin combination has been also proved to be chemoselective for the C=N reduction of imine analogs.

First-Row Transition Metal Complexes of a Phosphine-Silylene-Based Hybrid Ligand

We have prepared two new silylene-phosphine-based hybrid ligands Si{N(R)C₆H₄(PPh₂)}{PhC(N^tBu)₂} [R = TMS {trimethylsilyl} (1) and TBDMS {tert-butyldimethylsilyl} (2)], which possess two donor sites. Furthermore, the treatment of the bidentate ligand 1 with base metal halides {FeBr₂, CoBr₂, NiCl₂·dme [nickel chloride(II) ethylene glycol dimethyl ether]} and 2 with NiBr₂·dme [nickel bromide(II) ethylene glycol dimethyl ether] afforded four-coordinate six-membered metal complexes 3-6, respectively, which feature coordination from both Si(II) and P(III) sites. Subsequently, complexes 3 [(FeBr₂)Si{N(SiMe₃)C₆H₄(PPh₂)}{PhC(N^tBu)₂}], 4 [(CoBr₂)Si{N(SiMe₃)C₆H₄(PPh₂)}{PhC(N^tBu)₂}], 5 [(NiCl₂)Si{N(SiMe₃)C₆H₄(PPh₂)}{PhC(N^tBu)₂}], and 6 [(NiBr₂)Si{N(Si^tBuMe₂)C₆H₄(PPh₂)}{PhC(N^tBu)₂}] are studied for their redox and magnetic properties with the help of UV-vis spectroscopy, cyclic voltammetry, SQUID magnetometry, and theoretical calculations. Complexes 3-6 were found to display a paramagnetic behavior. All the compounds are well established by single-crystal X-ray diffraction studies.

Iron(0) tricarbonyl η4-1-azadiene complexes and their catalytic performance in the hydroboration of ketones, aldehydes and aldimines via a non-iron hydride pathway

Six iron(0) tricarbonyl complexes (1a-f) with a η⁴-1-azadiene moiety were prepared and their performance in the hydroboration of unsaturated organic compounds was investigated. All the complexes exhibit catalytic activity towards hydroboration of ketones, aldehydes and aldimines with pinacolborane (HBpin) as a hydride source to lead to secondary alcohols, primary alcohols, and secondary amines, respectively, after hydrolysis of the hydroboration products. Of the iron(0) tricarbonyl complexes, complex 1e is the most robust one and was employed throughout the catalytic investigation. Its preference towards the three types of substrates is as follows: aldimines > aldehydes ≫ ketones. In total, 24 substrates were examined for the catalytic hydroboration reactivity and generally, isolation yields ranging from 40% to 95% were achieved. Mechanistic investigation suggests that the catalytic hydroboration of the substrates proceeds via intramolecular hydride transfer without going through an Fe-H intermediate. As indicated by ¹H NMR spectroscopic monitoring, the substrates and the borane agent bind to the iron centre and the imine N atom, respectively, which facilitates the hydride transfer by activating the B-H bond and polarizing the double bond of the substrates.

A Striking Mode of Activation of Carbon Disulfide with a Cooperative Bis(silylene)

The reactivity of the 1,4-substituted bis(silylenyl)terphenylene 1, 1,4-[ortho-(LSi)C6 H4 ]2 C6 H4 , (L=RC(NtBu)2 , R=Ph, Mes) towards CS2 is reported. It results in a dearomatization of the phenylene ring, affording the 1,3-substituted cyclohexadiene derivative 2. According to DFT calculations, a transient silene containing a Si=C bond capable of π(C=C) addition at the aromatic phenylene ring is a key intermediate. In contrast, addition of CS2 to the biphenyl-substituted mono-silylene ortho-(LSi)C6 H4 -C6 H5 3 leaves the aromatic π-system intact and forms, in a [1+2] cycloaddition reaction, the corresponding thiasilirane 4 with a three-membered SiSC ring. Further experimental studies led to the isolation of the novel mesoionic five-membered Si2 S2 C heterocycle 6, which reacts with CS2 under C-C bond formation. All isolated new compounds were fully characterized and their molecular structures determined by single-crystal X-ray diffraction analyses.

The transition metal-catalysed hydroboration reaction

This review covers the development of the transition metal-catalysed hydroboration reaction, from its beginnings in the 1980s to more recent developments including earth-abundant catalysts and an ever-expanding array of substrates.

First-Row d-Block Element-Catalyzed Carbon-Boron Bond Formation and Related Processes

Organoboron reagents represent a unique class of compounds because of their utility in modern synthetic organic chemistry, often affording unprecedented reactivity. The transformation of the carbon-boron bond into a carbon-X (X = C, N, and O) bond in a stereocontrolled fashion has become invaluable in medicinal chemistry, agrochemistry, and natural products chemistry as well as materials science. Over the past decade, first-row d-block transition metals have become increasingly widely used as catalysts for the formation of a carbon-boron bond, a transformation traditionally catalyzed by expensive precious metals. This recent focus on alternative transition metals has enabled growth in fundamental methods in organoboron chemistry. This review surveys the current state-of-the-art in the use of first-row d-block element-based catalysts for the formation of carbon-boron bonds.

Zinc and Cadmium Complexes of Chelating N-Heterocyclic Silylene and Their Reactivity toward Elemental Chalcogens

The reactions of the pyridine-functionalized silylene L^NSi [L = PhC(NtBu)₂; N = 2-(methylamido)pyridine] with zinc and cadmium halides are described. These resulted in the formation of a series of zinc and cadmium silylene complexes: [L^NSi-ZnX₂] (X = Cl, Br, I) and [{L^NSi-CdI₂}₂], which is the first cadmium silylene compound. Subsequent reaction of these silylene complexes with elemental sulfur and selenium under mild conditions at room temperature afforded under activation of these elements the corresponding silanethione-stabilized zinc [(L^NSi═S)-ZnX₂] (X = Cl, I) and cadmium [(L^NSi═S)-CdI₂] complexes and the silaneselenone-stabilized zinc species [(L^NSi═Se)-ZnCl₂]. A selective insertion of the group 16 elements into the M-Si bond of the silylenes was observed. Because of metal coordination, the Si-chalcogen bond lengths in the silanethiones and silaneselenones are enlarged and thus range between a single and a double bond. All new compounds were fully characterized by single-crystal X-ray diffraction analyses, multinuclear NMR spectroscopy, elemental analyses, and IR spectroscopy.

Hydroboration of aldehydes, ketones and CO2 under mild conditions mediated by iron(iii) salen complexes

The hydroboration of aldehydes, ketones and CO₂ is demonstrated using a cheap and air stable [Fe(salen)]₂-μ-oxo pre-catalyst with pinacolborane (HBpin) as the reductant under mild conditions. This catalyst system chemoselectively hydroborates aldehydes over ketones and ketones over alkenes. In addition, the [Fe(salen)₂]-μ-oxo pre-catalyst shows good efficacy at reducing "wet" CO₂ with HBpin at room temperature.

Intramolecularly Double-Donor-Stabilized Stannylene and Its Coordination towards Ag(I) and Au(I) Centers

The intramolecularly double-donor-stabilized stannylene 1 has been synthesized from the salt-metathesis reaction between two equivalents of lithium pyridine ene-amide L1 and SnCl₂ . Compound 1 exhibits dipolar behavior when reacted with B(C₆ F₅ )₃ leading to the zwitterionic compound 2. The reaction of 1 with one equivalent and 0.5 equivalent of AgOTf (OTf=trifluoromethane sulfonate) result in the formation of a stannylene-AgOTf complex 3 and a homoleptic distannylene-silver ionic complex 4, respectively. Analogous to complex 4, the gold(I) complex 5 has been synthesized from the reaction between two equivalents of 1 and 0.5 equivalent of AuCl.SMe₂ /Me₃ SiOTf. Complex 5 is the first example of homoleptic stannylene-Au(I) ionic complex among the very scarce reports on stannylene-gold(I) coordination complexes. All compounds have been structurally characterized using single crystal X-ray crystallography. Solution-state characterization have been performed using multinuclear NMR techniques. Detailed DFT calculations on the optimized geometries 1 o, 3 o-5 o reveal the change in sp- hybridization on the pyramidal Sn(II) center upon metal coordination and their bonding overlaps.

Progress in the preparation and characterization of silylene iron, cobalt and nickel complexes

The synthesis and characterization of Fe, Co and Ni complexes supported by silylene ligands in the past ten years are summarized. Due to the decrease of the electron cloud density on the Si atom after coordination, the downfield shift of the 29Si chemical shift is accompanied by the coordination between the free silylene ligand and metal. The strong electron-donating ability of silylene makes the metal center more electron-rich, which is conducive to the oxidative addition reaction in the metal center. In some cases, the coordination ability of silylene is stronger than those of phosphine and carbene ligands. Therefore, silylene transition metal complexes have better catalytic activity. The further challenges in this field are to develop new polydentate silylene ligands, synthesize chelate silylene-phosphine and silylene-carbene ligands, and design new silylene transition metal complexes for more catalytic research.

Synthesis and Reactivity of Bis(silylene)-Coordinated Calcium and Divalent Lanthanide Complexes

Divalent lanthanide complexes of Eu (1) and Yb (2) coordinated by a chelating pyridine-based bis(silylene) ligand were isolated and fully characterized. Compared to the EuII complex 1, the YbII complex 2 presents a lower thermal stability, resulting in the activation of one SiII -N bond and formation of an YbIII complex (3), which features a unique silylene-pyridyl-amido ligand. The different thermal stability of 1 and 2 points towards reduction-induced cleavage of one SiII -N bond of the bis(silylene) ligand. Successful isolation of the corresponding redox-inert bis(silylene) CaII complex (5) was achieved at low temperature and thermal decomposition into a CaII complex (4) bearing the same silylene-pyridyl-amido ligand was identified. In this case, the thermolysis reaction proceeds through another, non-redox induced, mechanism. An alternative higher yielding route to 4 was developed through an in situ generated silylene-pyridyl-amine proligand.

Low-Valence Anionic α-Diimine Iron Complexes: Synthesis, Characterization, and Catalytic Hydroboration Studies

The synthesis of rare anionic heteroleptic and homoleptic α-diimine iron complexes is described. Heteroleptic BIAN (bis(aryl)iminoacenaphthene) complexes 1-[K([18]c-6)(thf)_0.5] and 2-[K([18]c-6)(thf)₂] were synthesized by reduction of the [(BIAN)FeBr₂] precursor complex using stoichiometric amounts of potassium graphite in the presence of the corresponding olefin. The electronic structure of these paramagnetic species was investigated by numerous spectroscopic analyses (NMR, EPR, ⁵⁷Fe Mössbauer, UV-vis), magnetic measurements (Evans NMR method, SQUID), and theoretical techniques (DFT, CASSCF). Whereas anion 1 is a low-spin complex, anion 2 consists of an intermediate-spin Fe(III) center. Both complexes are efficient precatalysts for the hydroboration of carbonyl compounds under mild reaction conditions. The reaction of bis(anthracene) ferrate(1-) gave the homoleptic BIAN complex 3-[K([18]c-6)(thf)], which is less catalytically active. The electronic structure was elucidated with the same techniques as described for complexes 1-[K([18]c-6)(thf)_0.5] and 2-[K([18]c-6)(thf)₂] and revealed an Fe(II) species in a quartet ground state.

Zinc Hydride-Catalyzed Hydrofuntionalization of Ketones

Three new dimeric bis-guanidinate zinc(II) alkyl, halide, and hydride complexes [LZnEt]₂ (1), [LZnI]₂ (2) and [LZnH]₂ (3) were prepared. Compound 3 was successfully employed for the hydrosilylation and hydroboration of a vast number of ketones. The catalytic performance of 3 in the hydroboration of acetophenone exhibits a turnover frequency, reaching up to 5800 h^-1, outperforming that of reported zinc hydride catalysts. Notably, both intra- and intermolecular chemoselective hydrosilylation and hydroboration reactions have been investigated.

Phosphane-functionalized heavier tetrylenes: synthesis of silylene- and germylene-decorated phosphanes and their reactions with Group 10 metal complexes

The stable phosphane-functionalized heavier tetrylenes E(tBu2bzam)pyrmPtBu2 (E = Si (1Si), Ge (1Ge); tBu2bzam = N,N'-ditertbutylbenzamidinate; HpyrmPtBu2 = ditertbutyl(2-pyrrolylmethyl)phosphane) have been prepared by reacting the amidinatotetrylenes E(tBu2bzam)Cl (E = Si, Ge) with LipyrmPtBu2. The reactions of 1Si and 1Ge with selected M0 and MII (M = Ni, Pd, Pt) metal precursors have allowed the synthesis of square-planar [MCl2{κ2E,P-E(tBu2bzam)pyrmPtBu2}] (M = Ni, Pd, Pt; E = Si, Ge), tetrahedral [Ni{κ2E,P-E(tBu2bzam)pyrmPtBu2}(cod)] (E = Si, Ge; cod = 1,5-cyclooctadiene) and triangular [M{κ2E,P-E(tBu2bzam)pyrmPtBu2}(PPh3)] (M = Pd, Pt; E = Si, Ge) complexes, showing that 1Si and 1Ge are excellent Si,P- and Ge,P-chelating ligands that, due to their large steric bulk, are able to stabilize three-coordinate Pd0 and Pt0 complexes.

Catalytic Hydroboration of Aldehydes, Ketones, and Alkenes Using Potassium Carbonate: A Small Key to Big Transformation

An efficient transition-metal-free protocol for the hydroboration of aldehydes and ketones (reduction) was developed. The hydroboration of a wide range of aldehydes and ketones with pinacolborane (HBpin) under the K₂CO₃ catalyst has been studied. The reaction system is practical and reliable and proceeds under extremely mild and operationally simple conditions. No prior preparation of the complex metal catalyst was required, and hydroboration occurred stoichiometrically. Further, the chemoselective reduction of aldehydes over ketones was carried out. Moreover, we demonstrated the use of K₂CO₃ as an efficient catalyst for the hydroboration of alkenes. The operational simplicity, inexpensive and transition-metal-free catalyst, and the applicability to gram-scale synthesis strengthen its potential applications for hydroboration (reduction) at an industrial scale.

Mesityl(amidinato)tetrylenes as ligands in iridium(i) and iridium(iii) complexes: silicon versus germanium and simple κ1-coordination versus cyclometallation

The reactivity of the germylene Ge(^tBu₂bzam)Mes with [Ir₂(μ-Cl)₂(η⁴-cod)₂] and [Ir₂Cl₂(μ-Cl)₂(η⁵-Cp*)₂] differs considerably from that previously communicated for the isostructural silylene Si(^tBu₂bzam)Mes.

Recent advances in the catalytic hydroboration of carbonyl compounds

The latest development in the catalytic hydroboration of CO groups is summarized in this review. Access to borate ester intermediates provides a pathway to convert them into the corresponding valuable functionalized alcohols.