Alkylaluminum Complexes as Precatalysts in Hydroboration of Nitriles and Carbodiimides

Gallium Hydride-Catalyzed Selective Hydroboration of Unsaturated Organic Substrates

The first examples of tetrasubstituted conjugated bis-guanidinate (CBG) supported monomeric and thermally stable gallium dihalides [LGaX2], (X=Cl (Ga-Cl), I (Ga-I)) and dihydride (Ga-H) [LGaH2] (where L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr)}; Ar=2,6-Et2-C6H3) compounds are reported. The reaction of in situ generated LLi with 1.0 equiv. GaX3 (X=Cl, I) afforded compounds Ga-Cl and Ga-I. The reaction between Ga-Cl and Li[HBEt3] in benzene yielded the dihydride compound Ga-H. All reported compounds (Ga-Cl, Ga-I, and Ga-H) were characterized by NMR, HRMS, and single-crystal X-ray diffraction studies. Ga-H was probed for the hydroboration of carbodiimides (CDI), isocyanates, and isothiocyanates with HBpin. Compound Ga-H was also found effective for the catalytic hydroboration of imines, nitriles, alkynes, esters, and formates, affording the corresponding products in quantitative yields. Stoichiometric reactions with a CDI were performed to establish the catalytic cycle.

Insight into the MOtBu (M=Na, K)-Mediated Dehydrogenation of Dimethylamine-Borane and Transfer Hydrogenation of Nitriles to Primary Amines

Selective synthesis of primary amines from nitriles is challenging in synthetic chemistry due to the possible en-route generation of various amines and imines. Herein, we report a practical and operationally simple MOtBu-mediated (M=Na, K) transfer hydrogenation of nitriles to the corresponding primary amines with a relatively unexplored sacrificial hydrogen source (dimethylamine borane). The strategy encompasses a broad substrate scope under transition metal-free conditions and does not require any solvent. The mechanistic investigation was performed with the aid of control experiments and spectroscopic studies. The GC analysis of the reaction mixture exhibited the evolution of the H2 gas. Additionally, detailed computational calculations were undertaken to shed light on the possible intermediates and transition states involved during the present protocol.

Chemoselective Luche-type reduction of α,β-unsaturated ketones by aluminium hydride catalysis

A novel, simple, eco-friendly, non-toxic aluminium catalyst was synthesised for the chemoselective reduction of α,β-unsaturated ketones. A wide range of ketones were achieved with excellent yields, mild conditions, and low catalyst loading. Furthermore, this unprecedented method allowed for the stereoselective reduction of natural ketones.

Iron complexes supported by silyl-NHC chelate ligands: synthesis and use for double hydroboration of nitriles

Iron complexes bearing new silyl-NHC bidentate ligands were synthesised by treating Fe3(CO)12 with a mixture of N-(hydrosilyl)methyl imidazolium salts and a base. These complexes showed high performance in the catalytic double hydroboration of nitrile with pinacolborane (HBpin) to produce N,N-bis(boryl)amine by a combination of UV irradiation and mild heating (60 °C). The product yields for the hydroboration of aromatic and aliphatic nitriles reached 85%-95% (NMR) using an iron complex (5 mol%). Reducing the loading amount of the iron complex to 0.5 mol% still afforded the products in high yields. An analogous ruthenium complex, which was similarly synthesised using Ru3(CO)12, showed lower activity. Stoichiometric reactions of the iron complex with nitriles afforded Fe(0)-N-silylimine complexes, which may be dormant states in nitrile hydroboration. A catalytic mechanism including Fe(0) N-silylimine species is proposed.

Carbodiimide and Isocyanate Hydroboration by a Cyclic Carbodiphosphorane Catalyst

We report hydroboration of carbodiimide and isocyanate substrates catalyzed by a cyclic carbodiphosphorane catalyst. The cyclic carbodiphosphorane outperformed the other Lewis basic carbon species tested, including other zerovalent carbon compounds, phosphorus ylides, an N-heterocyclic carbene, and an N-heterocyclic olefin. Hydroborations of seven carbodiimides and nine isocyanates were performed at room temperature to form N-boryl formamidine and N-boryl formamide products. Intermolecular competition experiments demonstrated the selective hydroboration of alkyl isocyanates over carbodiimide and ketone substrates. DFT calculations support a proposed mechanism involving activation of pinacolborane by the carbodiphosphorane catalyst, followed by hydride transfer and B-N bond formation.

Secondary-sphere preorganization enables nickel-catalyzed nitrile hydroboration

Herein, we describe nickel-catalyzed nitrile hydroboration with pinacolborane, wherein a tethered NHC-pyridonate ligand enables efficient catalysis (5 mol% [Ni], ≤6 h reaction time) at room temperature. Mechanistic studies, including isolation of the catalytically relevant intermediates, shed light on the cooperative role of the ligand in activating both reagents simultaneously.

Zinc Catalyzed Hydroboration of Esters and Nitriles with Pinacolborane

We developed a bench-stable iminopyridine-ligated zinc complex for the effective catalytic hydroboration of esters and nitriles under solvent-free conditions. Various esters and nitriles bearing different functionalities were selectively reduced to form corresponding alcohols and amines in good yields. Detailed Hammett plots are provided to explain the electronic effects on the phenyl ring.

N^N vs. N^E (E = S or Se) coordination behavior of imino-phosphanamidinate chalcogenide ligands towards aluminum alkyls: efficient hydroboration catalysis of nitriles, alkynes, and alkenes

The synthesis, characterization, and catalytic application of six aluminum alkyl complexes supported by various imino-phosphanamidinate chalcogenide ligands are described. Six different unsymmetrical imino-phosphanamidinate chalcogenide ligands [NHI^RP(Ph)(E)NH-Dipp] [R = 2,6-diisopropylphenyl (Dipp), E = S (2a-H), Se (2b-H); R = mesityl (Mes), E = S (3a-H), Se (3b-H); R = tert-butyl (^tBu), E = S (4a-H), Se (4b-H)] were prepared by the oxidation of respective imino-phosphanamide ligands (1a, 1b and 1c) with elemental chalcogen atoms (S and Se). The aluminum complexes with imino-phosphanamidinate chalcogenide ligands with the general formulae [κ²_NN-{NHI^RP(Ph)(E)N-Dipp}AlMe₂] [R = Dipp, E = S (5a), Se (5b); R = Mes, E = S (6a), Se (6b)] or [κ²_NE-{NHI^RP(Ph)(E)N-Dipp}AlMe₂] [R = ^tBu, E = S (7a), Se (7b)] were synthesized in good yields from the reaction of the suitable protic ligands (2a,b-H-4a,b-H) and trimethylaluminum in a 1 : 1 molar ratio in toluene at room temperature. All the protic ligands and aluminum complexes were well characterized by multi-nuclear NMR spectroscopy, and the solid-state structures of 2a,b-H-4a,b-H, 5a,b-6a,b and 7b are established by single crystal X-ray diffraction analysis. The aluminum complexes 5a,b-7a,b were tested as catalysts for the hydroboration of nitriles, alkynes, and alkenes under mild conditions. The catalytic hydroboration reactions of nitriles, alkynes, and alkenes were accomplished with complex 5b at a mild temperature under solvent-free conditions to afford a high yield of the corresponding N,N-diborylamines, vinylboranes and alkyl boronate esters, respectively.

Partner effect in accelerating pincer-co catalyzed nitrile hydroboration reactions

The pincer-Co catalyzed nitrile hydroboration of nitrile has been presented as an elegant strategy to afford amine synthesis; however, ligand engineering is required. We show here a strategy to tune the catalytic behavior of the organometallic catalyst, as an alternative approach to ligand engineering, by means of computational investigations to understand the effect of partners such as (18-crown-6)K⁺, W(CO)₃ and W(PMe₃)₃ on the reactivity of the pincer-Co catalyzed nitrile hydroboration reaction through π-coordination to the ligand aromatic ring. The extra additives bind the central phenyl ring of the ligand by either dispersion or chemical bonding. The electron-richness of the cobalt center is tuned by the partner, and follows the order (18-crown-6)K⁺ > W(PMe₃)₃ > no partner > W(CO)₃. While the influence of the covalent W-containing partners parallels the electron-richness of the W, the non-covalent partner, (18-crown-6)K⁺, surprisingly increases the donor ability of the pincer ligand through the polarization effect. All the elementary steps involved in the nitrile hydroboration reaction are influenced by the partner, and the overall barrier is lowered by a surprisingly large amount of 4.9 kcal mol^-1 in the presence of (18-crown-6)K⁺, suggesting a notable partner effect to be explored by experimentalists so that the reactivity of a catalyst can be tuned without ligand modification.

Aluminium-Catalyzed Selective Hydroboration of Esters and Epoxides to Alcohols: C-O Bond Activation

In this work, the molecular aluminium dihydride complex bearing an N, N'-chelated conjugated bis-guanidinate (CBG) ligand is used as a catalyst for reducing a wide range of aryl and alkyl esters with good tolerance of alkene (C=C), alkyne (C≡C), halides (Cl, Br, I and F), nitrile (C≡N), and nitro (NO₂ ) functionalities. Further, we investigated the catalytic application of aluminium dihydride in the C-O bond cleavage of alkyl and aryl epoxides into corresponding branched Markovnikov ring-opening products. In addition, the chemoselective intermolecular reduction of esters over other reducible functional groups, such as amides and alkenes, has been established. Intermediates are isolated and characterized by NMR and HRMS studies, which confirm the probable catalytic cycles for the hydroboration of esters and epoxides.

Group 13 exchange and transborylation in catalysis

Catalysis is dominated by the use of rare and potentially toxic transition metals. The main group offers a potentially sustainable alternative for catalysis, due to the generally higher abundance and lower toxicity of these elements. Group 13 elements have a rich catalogue of stoichiometric addition reactions to unsaturated bonds but cannot undergo the redox chemistry which underpins transition-metal catalysis. Group 13 exchange reactions transfer one or more groups from one group 13 element to another, through σ-bond metathesis; where boron is both of the group 13 elements, this is termed transborylation. These redox-neutral processes are increasingly being used to render traditionally stoichiometric group 13-mediated processes catalytic and develop new catalytic processes, examples of which are the focus of this review.

Comparing B-H Bond Activation in NiIIX(NNN)-Catalyzed Nitrile Dihydroboration (X = Anionic N-, C-, O-, S-, or P-donor)

One of the key steps in many metal complex-catalyzed hydroboration reactions is B-H bond activation, which results in metal hydride formation. Anionic ligands that include multiple lone pairs of electrons, in cooperation with a metal center, have notable potential in redox-neutral B-H bond activation through metal-ligand cooperation. Herein, using an easily prepared N_pyridineN_imineN_pyrrolide ligand (L²)^-, a series of divalent Ni^IIX(NNN) complexes were synthesized, with X = bromide (2), phenoxide (3), thiophenoxide (4), 2,5-dimethylpyrrolide (5), diphenylphosphide (6), and phenyl (7). The complexes were characterized using ¹H and ¹³C NMR spectroscopy, mass spectrometry, and X-ray crystallography and employed as precatalysts for nitrile dihydroboration. Superior activity of the phenoxy derivative (3) [vs thiophenoxy (4) or phenyl (7)] suggests that B-H bond activation occurs at the Ni-X (vs ligand Ni-N_pyrrolide) bond. Furthermore, stoichiometric treatment of 2-7 with a nitrile showed no reaction, whereas stoichiometric reactions of 2-7 with pinacolborane (HBpin) gave the same Ni-H complex for 2, 3, and 5. Considering that only 2, 3, and 5 successfully catalyzed nitrile dihydroboration, we suggest that the catalytic cycle involves a conventional inner sphere pathway initiated by substrate insertion into Ni-H.

Metal/Non-Metal Catalyzed Activation of Organic Nitriles

Nitrile activation is a prominent topic in recent developments in chemistry, especially in organic, inorganic, biological chemistry, as well as in the natural synthesis of products and in the pharmaceutical industry. The activation of nitriles using both metal and non-metal precursors has attracted several researchers, who are exploring newer ways to synthesize novel compounds. Nitrile activation can be achieved by combining various catalytic double hydroelementation reactions, such as hydrosilylation, hydroboration, and hydrogenation of organonitriles using silanes, pinacolborane, and other sources of hydrogen. These methodologies have garnered considerable attention since they are effective in the reduction of organonitriles, whose end products are extensively applied in synthetic organic chemistry. In this review, we summarize the development of selective hydroborylation, hydrosilylation, dihydroborysilylation, and hydrogenation of organonitriles, as well as their reaction mechanisms and the role of metal complexes in the catalytic cycles. This review article explains various synthetic methodologies applied toward the reduction of organonitriles into corresponding amines.

B–N/B–H Transborylation: borane-catalysed nitrile hydroboration

The reduction of nitriles to primary amines is a useful transformation in organic synthesis, however, it often relies upon stoichiometric reagents or transition-metal catalysis. Herein, a borane-catalysed hydroboration of nitriles to give primary amines is reported. Good yields (48–95%) and chemoselectivity (e.g., ester, nitro, sulfone) were observed. DFT calculations and mechanistic studies support the proposal of a double B–N/B–H transborylation mechanism.

Applications of catalysis in hydroboration of imines, nitriles, and carbodiimides

The catalytic hydroboration of imines, nitriles, and carbodiimides is a powerful method of preparing amines which are key synthetic intermediates in the synthesis of many value-added products. Imine hydroboration has perennially featured in notable reports while nitrile and carbodiimide hydroboration have gained attention recently. Initial developments in catalytic hydroboration of imines and nitriles employed precious metals and typically required harsh reaction conditions. More recent advances have shifted toward the use of base metal and main group element catalysis and milder reaction conditions. In this survey, we review metal and nonmetal catalyzed hydroboration of these unsaturated organic molecules and group them into three distinct categories: precious metals, base metals, and main group catalysts. The TON and TOF of imine hydroboration catalysts are reported and summarized with a brief overview of recent advances in the field. Mechanistic and kinetic studies of some of these protocols are also presented.

Organoaluminum hydrides catalyzed hydroboration of carbonates, esters, carboxylic acids, and carbon dioxide

The reductive functionalization of the CO unit of carbonates, carboxylic acids, esters, and CO₂, respectively has received great attention since its introduction. This method is often used industrially for the synthesis of high value-added energy products in chemistry. This opens up a new way forward to reduce greenhouse gases and the consumption of traditional energy sources. Herein, we report an earth-abundant, cheap, and readily available aluminum dihydride, which can catalyze the reduction of a range of carbonates, esters, carboxylic acids, and CO₂, respectively in the presence of pinacolborane as a reducing agent. Moreover, we demonstrate that the reaction can proceed to obtain good yield products under mild conditions, with low catalyst loading and solvent-free reactions. The mechanism of the catalytic reduction of carbonates has been investigated.

s-Block Metal Catalysts for the Hydroboration of Unsaturated Bonds

The addition of a B-H bond to an unsaturated bond (polarized or unpolarized) is a powerful and atom-economic tool for the synthesis of organoboranes. In recent years, s-block organometallics have appeared as alternative catalysts to transition-metal complexes, which traditionally catalyze the hydroboration of unsaturated bonds. Because of the recent and rapid development in the field of hydroboration of unsaturated bonds catalyzed by alkali (Li, Na, K) and alkaline earth (Mg, Ca, Sr, Ba) metals, we provide a detailed and updated comprehensive review that covers the synthesis, reactivity, and application of s-block metal catalysts in the hydroboration of polarized as well as unsaturated carbon-carbon bonds. Moreover, we describe the main reaction mechanisms, providing valuable insight into the reactivity of the s-block metal catalysts. Finally, we compare these s-block metal complexes with other redox-neutral catalytic systems based on p-block metals including aluminum complexes and f-block metal complexes of lanthanides and early actinides. In this review, we aim to provide a comprehensive, authoritative, and critical assessment of the state of the art within this highly interesting research area.

Bicyclic (alkyl)(amino)carbene (BICAAC) as a metal-free catalyst for reduction of nitriles to amines

Bicyclic (alkyl)(amino)carbene (BICAAC) is introduced as a metal-free catalyst for the reduction of various nitriles to the corresponding amine hydrochloride salts in the presence of pinacolborane. Mechanistic investigations combining experiments and DFT calculations suggest a B-H addition to the carbene center, which acts as a carrier of the hydride source.

Aluminium complexes: next-generation catalysts for selective hydroboration

Organoboranes obtained from hydroboration reactions are one of the important classes of compounds that could be used to provide valuable synthons for follow-up transformations such as various functional group incorporation or C-C bond forming reactions. For decades, various transition metals were utilised as catalysts in such transformations. Recently Earth-abundant and less toxic main group metals have revived their importance in hydroboration chemistry, among which the suitable candidates are aluminium complexes as catalysts. In this regard, the development of aluminium complexes to achieve more robust catalytic systems with greater efficiency is appreciable.

Iron-catalysed hydroboration of non-activated imines and nitriles: kinetic and mechanistic studies

Iron-catalysed hydroboration of imines and nitriles has been developed under low catalyst loading (1 mol%) in the presence of HBpin. A wide scope of substrate was found to smoothly undergo hydroboration, including electron releasing/withdrawing and halogen substitution patterns and cyclic substrates which all afforded the corresponding amines in good to excellent yields. Dihydroboration of nitriles was achieved conveniently under solvent free and additive free conditions. Promisingly, this catalytic system is also capable of the hydroboration of challenging ketimine substrates. Preliminary kinetic analysis of imine hydroboration reveals a first-order dependence on catalyst concentration. Both HBpin and 4-fluorophenyl-N-phenylmethanimine (1b) appear to exhibit saturation kinetics with first order dependence up to 0.5 mmol HBpin and 0.75 mmol imine, respectively. Temperature-dependent rate experiments for imine hydroboration have also been explored. Activation parameters for the hydroboration of FPhC[double bond, length as m-dash]NPh (1b) were determined from the Eyring and Arrhenius plots with ΔS ≠, ΔH ≠, and E a values of -28.69 (±0.3) e.u., 12.95 (±0.04) kcal mol-1, and 15.22 (±0.09) kcal mol-1, respectively.

Hydroboration of Nitriles, Esters, and Carbonates Catalyzed by Simple Earth-Abundant Metal Triflate Salts

During the past decade earth-abundant metals have become increasingly important in homogeneous catalysis. One of the reactions in which earth-abundant metals have found important applications is the hydroboration of unsaturated C-C and C-X bonds (X=O or N). Within these set of transformations, the hydroboration of challenging substrates such as nitriles, carbonates and esters still remain difficult and often relies on elaborate ligand designs and highly reactive catalysts (e. g., metal alkyls/hydrides). Here we report an effective methodology for the hydroboration of challenging C≡N and C=O bonds that is simple and applicable to a wide set of substrates. The methodology is based on using a manganese(II) triflate salt that, in combination with commercially available potassium tert-butoxide and pinacolborane, catalyzes the hydroboration of nitriles, carbonates, and esters at room temperature and with near quantitative yields in less than three hours. Additional studies demonstrated that other earth-abundant metal triflate salts can facilitate this reaction as well, which is further discussed in this report.

Hydroboration of nitriles and imines by highly active zinc dihydride catalysts

Eco-friendly zinc dihydrides stabilized by N-heterocyclic carbenes were demonstrated to be highly efficient catalysts for the double hydroboration of nitriles with pinacolborane, exhibiting turnover frequencies up to 3000 h⁻¹ at room temperature under solvent-free conditions. The reactions afforded corresponding diboronated amines with excellent yields and good functional group tolerance. A single Zn–H insertion product was isolated from a stoichiometric reaction of zinc dihydride with nitrile, and was proved to be an active species in this transformation. Kinetic studies were performed to give some insights into the catalytic reactions. In addition, zinc dihydride species also showed high activity for the hydroboration of imines to boronated amines.

Molecular zinc dihydrides were found to be highly efficient catalysts for the hydroboration of nitriles and imines at room temperature under solvent-free conditions.

Synthesis and characterization of group 13 dichloride (M = Ga, In), dimethyl (M = Al) and cationic methyl aluminum complexes supported by monoanionic NNN-pincer ligands

A series of monoanionic NNN-pincer ligands effectively stabilize five-coordinate gallium and indium dichloride complexes, as well as neutral dimethyl aluminum species, and organometallic cations thereof.

Catalytic Nitrile Hydroboration: A Route to N,N-Diborylamines and Uses Thereof

Catalytic reduction of nitriles is considered as an attractive and atom-economical route to a diversity of synthetically valuable primary amines. Compared to other methods, dihydroboration approach has been developed relatively recently but has already attracted the attention of many research groups due to reasonably mild reaction conditions, selectivity control and the access to N,N-diborylamines, which emerged as powerful reagents for C-N bond forming reactions. Early developments in catalytic dihydroboration of nitriles implied precious metal catalysts along with harsh conditions and prolonged reaction times, whereas recent advances mostly rely on base and main group metal catalytic systems with significantly improved profiles. This minireview aims to provide an overview of advances and challenges of dihydroboration of nitriles with d-, f- and main group metal catalysts. Mechanistic features of different catalytic systems, functional group tolerance and scope of the methods are also presented. The synthetic utility of N,N-diborylamies, beyond simple protodeborylation, is discussed in the aspect of N-arylation, imine and amide synthesis.

Efficient Co-Catalyzed Double Hydroboration of Nitriles: Application to One-Pot Conversion of Nitriles to Aldimines

The commercially available and bench-stable Co(acac)₂ /dpephos system is employed as a precatalyst for selective and efficient room temperature hydroboration of organic nitriles with HBPin to produce a series of N,N-diborylamines [RN(BPin)₂ ], which react in situ with aldehydes to give aldimines. Formation of aldimines from N,N-diborylamines does not require a dehydrating agent, is applicable to a wide range of N,N-diborylamine and aldehyde substrates and is highly chemoselective, being unaffected by various common functional groups, such as alkenes, alkynes, secondary amines, ketones, esters, amides, carboxylic acids, pyridines, nitriles, and nitro compounds. The overall transformation represents a synthetically valuable approach to aldimines from nitriles and can be performed in a sequential one-pot manner, tolerating ester, lactone, carboxamide and unactivated alkene functionalities.

Lithium amide catalyzed hydroboration of nitriles

An operationally facile hydroboration of nitriles is reported that utilizes the stable and inexpensive catalyst LiN(SiMe₃)₂. The reaction displayed good tolerance of functional groups and also converted carbonyl derivatives.

Scope and mechanism of nitrile dihydroboration mediated by a β-diketiminate manganese hydride catalyst

Nitrile insertion allows for manganese-catalyzed nitrile dihydroboration at 80 °C.

Organoaluminum cations for carbonyl activation

In search of stable, yet reactive aluminum Lewis acids, we have isolated an organoaluminum cation, [(Me2NC6H4)2Al(C4H8O)2]+, coordinated with two labile tetrahydrofuran ligands. Its catalytic performance in aldehyde dimerization reveals turn-over frequencies reaching up to 6000 h-1, exceeding that of the reported main group catalysts. The cation is further demonstrated to catalyze hydroelementation of ketones. Mechanistic investigations reveal that aldehyde dimerization and ketone hydrosilylation occur through carbonyl activation.