Aroylation of Electron-Rich Pyrroles under Minisci Reaction Conditions

Sequential Modification of Pyrrole Ring with up to Three Different Nucleophiles

An umpolung strategy was used for the preparation of highly functionalized 3-pyrrolin-2-ones. This approach involves dearomative double chlorination of 1H-pyrroles to form highly reactive dichloro-substituted 2H-pyrroles. The resulting intermediate reacts selectively with wet alcohols to form the corresponding alkoxy-substituted 3-pyrrolin-2-ones via double nucleophilic substitution in up to 99% yield. The subsequent reaction with different N-, O-, and S-nucleophiles opens access to highly functionalized pyrrolinones bearing additional functionality. The overall outcome of the reported sequence is step-by-step nucleophilic modification of pyrroles with three different nucleophiles. All steps were found to be highly efficient and 100% regioselective. This transformation proceeds under mild conditions and does not require any catalyst to give final products in very high yields. The obtained experimental results are in perfect agreement with the data obtained by theoretical investigation of these reactions.

Synthesis of Quinazolinones and Benzothiazoles Using α-Keto Acids under Ball Milling

Mechanochemistry refers to the initiation of chemical reactions via mechanical forces such as milling, grinding, or shearing to achieve the chemical transformations. As a manifestation of mechanocatalysis, herein, an oxidant-free and solvent-free approach for the synthesis of quinazolinones (23 derivatives) and benzothiazoles (23 derivatives) has been developed through stainless-steel-driven decarboxylative acyl radical generation from α-keto acids. A library of 2-arylquinazolinones and 2-arylbenzothiazoles has been prepared in moderate to good yields at room temperature. Moreover, control experiments and XPS studies supported the reduction (by zerovalent iron) of molecular oxygen through the moderate abrasion of balls, which promoted the generation of a superoxide radical anion via a SET process.

Growing Utilization of Radical Chemistry in the Synthesis of Pharmaceuticals

Our current unhealthy lifestyle and the exponential surge in the population getting affected by a variety of diseases have made pharmaceuticals or drugs an imperative part of life, making the development of innovative strategies for drug discovery or the introduction of refined, cost-effective and modern technologies for the synthesis of clinically used drugs, a need of the hour. Ever since their discovery, free radicals and radical cations or anions as reactive intermediates have captivated the chemists, resulting in an exceptional utilization of these moieties throughout the field of chemical synthesis, owing to their unprecedented and widespread reactivity. Sticking with the idea of not judging the book by its cover, despite the conventional thought process of radicals being unstable and difficult to control entities, scientists and academicians around the globe have done an appreciable amount of work utilizing both persistent as well as transient radicals for a variety of organic transformations, exemplifying them with the synthesis of significant biologically active pharmaceutical ingredients. This review truly accounts for the organic radical transformations including radical addition, radical cascade cyclization, radical/radical cross-coupling, coupling with metal-complexes and radical cations coupling with nucleophiles, that offers fascinating and unconventional approaches towards the construction of intricate structural frameworks of marketed APIs with high atom- and step-economy; complementing the otherwise employed traditional methods. This tutorial review presents a comprehensive package of diverse methods utilized for radical generation, featuring their reactivity to form critical bonds in pharmaceutical total synthesis or in building key starting materials or intermediates of their synthetic journey, acknowledging their excellence, downsides and underlying mechanisms, which are otherwise poorly highlighted in the literature. Despite great achievements over the past few decades in this area, many challenges and obstacles are yet to be unraveled to shorten the distance between the academics and the industry, which are all discussed in summary and outlook.

Synthesis of N-alkoxycarbonyl Pyrroles from O-Substituted Carbamates: A Synthetically Enabling Pyrrole Protection Strategy

The condensation of readily available O-substituted carbamates with 2,5-dimethoxytetrahydrofuran gives N-alkoxycarbonyl pyrroles in a single step and in good yield. By this method, several common amine protecting groups can be introduced on the pyrrole nitrogen. With the exception of N-Boc, N-alkoxycarbonyl groups have seen only minimal use for protection of the pyrrole nitrogen to date. Here, we show that N-alkoxycarbonyl protection can endow pyrrole with distinct reactivity in comparison with N-sulfonyl protection, for example, in a pyrrole acylation protocol employing carboxylic acids with a sulfonic acid anhydride activator.

An NHC-Catalyzed Desulfonylative Smiles Rearrangement of Pyrrole and Indole Carboxaldehydes

The use of catalysis methods to enable Smiles rearrangement opens up new substrate classes for arylation under mild conditions. Here, we describe an N-heterocyclic carbene (NHC) catalysis system that accesses indole and pyrrole aldehyde substrates in a desulfonylative Smiles process. The reaction proceeds under mild, transition-metal-free conditions and captures acyl anion reactivity for the synthesis of a diverse array of 2-aroyl indoles and pyrroles from readily available sulfonamide starting materials.

Toward a General Protocol for Catalytic Oxidative Transformations Using Electrochemically Generated Hypervalent Iodine Species

A simple catalytic electrosynthetic protocol for oxidative transformations mediated by hypervalent iodine reagents has been developed. In this protocol, electricity drives the iodine(I)/iodine(III) catalytic cycle enabling catalysis with in situ generated hypervalent iodine species, thereby eliminating chemical oxidants and the inevitable chemical waste associated with their mode of action. In addition, no added electrolytic salts are needed in this process. The developed method has been validated using two different hypervalent iodine-mediated transformations: (i) the oxidative cyclization of N-allylic and N-homoallylic amides to the corresponding dihydrooxazole and dihydro-1,3-oxazine derivatives, respectively, and (ii) the α-tosyloxylation of ketones. Both reactions proceeded smoothly under the developed catalytic electrosynthetic conditions without reoptimization, featuring a wide substrate scope and excellent functional group tolerance. In addition, scale-up to gram-scale and catalyst recovery were easily achieved maintaining the high efficiency of the process.

Synthesis of a Constitutional Isomer of Armeniaspirol A, Pseudoarmeniaspirol A, via Lewis Acid-Mediated Rearrangement

The natural product armeniaspirol possesses a unique spirocyclic N,O-ketal in an α,β-dichloro-α,β-unsaturated lactam scaffold that has proved challenging to synthesize. Herein, we characterize the oxidative chlorination of pyrrole-2-carboxylate derivatives that rapidly generates this scaffold. The scope of this oxidation was extended to a series of esters and amides. Pyrrole-2-ketones could not be converted into the lactam due to an oxidative fragmentation. This result was unexpected since chloro-armeniaspirol has been synthesized via oxidative chlorination of a pyrrole-2-ketone. Examination of this successful oxidation showed that the desired scaffold was accessed due to intramolecular trapping from the neighboring free phenol, preventing fragmentation. Using the product of methyl N-methyl pyrrole-2-carboxylate oxidation 7b, we attempted to access the natural product armeniaspirol 2; however, an unanticipated Lewis acid-mediated rearrangement led to formation of a constitutional isomer, pseudoarmeniaspirol A 1. A small panel of pseudoarmeniaspirol analogues was synthesized and evaluated for antibiotic activity, inhibition of the targets of armeniaspirol, ClpXP and ClpYQ, and protonophore activity. While pseudoarmeniaspirol shows antibiotic activity, it does not target ClpXP or ClpYQ and has less protonophore activity than the natural product.

(NH4)2S2O8-Mediated Metal-Free Decarboxylative Formylation/Acylation of α-Oxo/Ketoacids and Its Application to the Synthesis of Indole Alkaloids

A metal-free method for the formylation/acylation of indoles and β-carbolines with (NH₄)₂S₂O₈ via direct decarboxylative cross-coupling of α-oxo/ketoacids in moderate to good yields is described. The reaction occurs between ambient temperature and 40 °C under mild reaction conditions with commercially available starting materials. This methodology can be expanded to some biologically active indole alkaloids like pityriacitrins, eudistomins Y₁ and Y₃, and marinacarbolines A-D.

Copper-Mediated Decarboxylative Coupling of 3-Indoleacetic Acids with Pyrazolones

A copper-mediated decarboxylative coupling reaction of 3-indoleacetic acids with pyrazolones was described. This protocol realized new functionalization of pyrazolones under simple reaction conditions and exhibited high functional group compatibility and broad substrate scope. Notably, the products displayed antiproliferative activity against cancer cells.

Chemoselective N-acylation of indoles using thioesters as acyl source

The selective acylation of indoles often requires sensitive and reactive acyl chloride derivatives. Here, we report a mild, efficient, functional group tolerant, and highly chemoselective N-acylation of indoles using thioesters as a stable acyl source. A series of indoleamides have been obtained with moderate to good yields. In addition, heterocycles, such as carbazole, can also be used as nucleophiles in this reaction.

Photo-Induced Cross-Dehydrogenative Alkylation of Heteroarenes with Alkanes under Aerobic Conditions

We report a Minisci-type cross-dehydrogenative alkylation in an aerobic atmosphere using abundant and inexpensive cerium chloride as a photocatalyst and air as an oxidant. This photoreaction exhibits excellent tolerance to functional groups and is suitable for both heteroarene and alkane substrates under mild conditions, generating the corresponding products in moderate-to-good yields. Our method provides an alternative approach for the late-stage functionalization of valuable substrates.

Interface Trap Suppression and Electron Doping in Van der Waals Materials Using Cross-Linked Poly(vinylpyrrolidone)

The instability of van der Waals (vdW) materials leads to spontaneous morphological and chemical transformations in the air. Although the passivation of vdW materials with other resistive materials is often used to solve stability issues, this passivation layer can block carrier injection and thus interfere with charge transfer doping. In this study, a facile method is proposed for n-doping and mediation of Se vacancies in tungsten diselenide (WSe₂) by poly(vinylpyrrolidone) (PVP) coating. The major carrier type of the PVP-coated WSe₂-based field-effect transistor (FET) was converted from hole (p-type) to electron (n-type). Furthermore, the vacancy-induced interface trap density was reduced by approximately 500 times. This study provides a practical doping and passivation method for the van der Waals materials, as well as a comprehensive understanding of the chemical reaction and electronic transport in these materials.

K2S2O8 activation by glucose at room temperature for the synthesis and functionalization of heterocycles in water

While persulfate activation at room temperature using glucose has primarily been focused on kinetic studies of the sulfate radical anion, the utilization of this protocol in organic synthesis is rarely demonstrated. We reinvestigated selected K₂S₂O₈-mediated known organic reactions that invariably require higher temperatures and an organic solvent. A diverse, mild functionalization and synthesis of heterocycles using the inexpensive oxidant K₂S₂O₈ in water at room temperature is reported, demonstrating the sustainability and broad scope of the method. Unlike traditional methods used for persulfate activation, the current method uses naturally abundant glucose as a K₂S₂O₈ activator, avoiding the use of higher temperature, UV light, transition metals or bases.

K2S2O8 mediated synthesis of 5-aryldipyrromethanes and meso-substituted A4-tetraarylporphyrins

The synthesis of dipyrromethanes from pyrrole and arylglyoxylic acids in the presence of K2S2O8at 90 [Formula: see text]C is reported affording dipyrromethanes in very good yields. Unlike an excess pyrrole traditionally used in dipyrromethane synthesis, the current method uses a stoichiometric amount of pyrrole avoiding any use of Brønsted or Lewis acid. A gram scale synthesis of 5-phenyldipyrromethane is also achieved demonstrating potential scale up of dipyrromethanes using this method feasible. Subsequently, dipyrromethanes were converted to A4-tetraarylporphyrins also in the presence of K2S2O8at 90[Formula: see text]C. A direct synthesis of A4-tetraphenylporphyrin from excess pyrrole and phenylglyoxylic acid in the presence of K2S2O8 at 90[Formula: see text]C is also reported.

Persulfate-activated charcoal mixture: an efficient oxidant for the synthesis of sulfonated benzo[d][1,3]oxazines from N-(2-vinylphenyl)amides and thiols in aqueous solution

A series of 2,4-aryl-4-((arylsulfonyl)methyl)-4H-benzo[d][1,3]oxazines in good to excellent yields have directly been obtained from N-(2-vinylphenyl)amides and thiols by employing a mixture of K₂S₂O₈-activated charcoal in aqueous acetonitrile solution at 50 °C. A plausible mechanism for the reaction is reported. It reveals that the reaction follows a radical pathway and the persulfate has been the oxygen source for formation of the sulfone group in the products. It is worth mentioning that this protocol utilizes an easily accessible K₂S₂O₈-activated charcoal mixture and thiols, respectively, as an oxidant and sulfonylating precursors for the first time.

Recent Advances in Functionalization of Pyrroles and their Translational Potential

Among the known aromatic nitrogen heterocycles, pyrrole represents a privileged aromatic heterocycle ranging its occurrence in the key component of "pigments of life" to biologically active natural products to active pharmaceuticals. Pyrrole being an electron-rich heteroaromatic compound, its predominant functionalization is legendary to aromatic electrophilic substitution reactions. Although a few excellent reviews on the functionalization of pyrroles including the reports by Baltazzi in 1963, Casiraghi and Rassu in 1995, and Banwell in 2006 are available, they are fragmentary and over fifteen years old, and do not cover the modern aspects of catalysis. A review covering a comprehensive package of direct functionalization on pyrroles via catalytic and non-catalytic methods including their translational potential is described. Subsequent to statutory yet concise introduction, the classical functionalization on pyrroles using Lewis acids largely following an ionic mechanism is discussed. The subsequent discussion follows the various metal-catalyzed C-H functionalization on pyrroles, which are otherwise difficult to implement by Lewis acids. A major emphasize is given on the radical based pyrrole functionalization under metal-free oxidative conditions, which is otherwise poorly highlighted in the literature. Towards the end, the current development of pyrrole functionalization under photocatalyzed and electrochemical conditions is appended. Only a selected examples of substrates and important mechanisms are discussed for different methods highlighting their scopes and limitations. The aromatic nucleophillic substitution on pyrroles (being an electron-rich heterocycle) happened to be the subject of recent investigations, which has also been covered accentuating their underlying conceptual development. Despite great achievements over the past several years in these areas, many challenges and problems are yet to be solved, which are all discussed in summary and outlook.

Minisci aroylation of N-heterocycles using choline persulfate in water under mild conditions

A modified Minisci aroylation of isoquinoline using arylglyoxylic acids in the presence of choline persulfate or pre-composition (choline acetate and K2S2O8) in water at ambient temperature affording aroylated isoquinolines is reported.

N-Acyl pyrroles: chemoselective pyrrole dance vs. C–H functionalization/aroylation of toluenes

Chemoselectivity is one of the most challenging issues facing the chemical sciences.

Scalable electrochemical synthesis of diaryliodonium salts

Cyclic and acyclic diaryliodonium are synthesised by anodic oxidation of iodobiaryls and iodoarene/arene mixtures, respectively, in a simple undivided electrolysis cell in MeCN-HFIP-TfOH without any added electrolyte salts. This atom efficient process does not require chemical oxidants and generates no chemical waste. More than 30 cyclic and acyclic diaryliodonium salts with different substitution patterns were prepared in very good to excellent yields. The reaction was scaled-up to 10 mmol scale giving more than four grams of dibenzo[b,d]iodol-5-ium trifluoromethanesulfonate (>95%) in less than three hours. The solvent mixture of the large-scale experiment was recovered (>97%) and recycled several times without significant reduction in yield.

Metal-free spirocyclization of N-arylpropiolamides with glyoxylic acids: access to complex azaspiro-fused tricycles

An efficient K₂S₂O₈-mediated oxidative cascade spirocyclization of N-arylpropiolamides with aryl glyoxylic acids was demonstrated for constructing azaspiro[4,5]-trienones and complex azaspiro-fused architectures.

The recent advances in K2S2O8-mediated cyclization/coupling reactions via an oxidative transformation

Recently the K₂S₂O₈ mediated cyclization/coupling reactions to construct carbon–carbon/carbon–heteroatom bond via oxidative transformation is became much interesting in organic synthesis.

Metal-free benzoylation of imidazoheterocycles by oxidative decarboxylation of arylglyoxylic acids

A simple and straightforward approach has been realized for the direct benzoylation of imidazoheterocycles by oxidative decarboxylation of arylglyoxylic acids in the presence of K₂S₂O₈ as an oxidant.

Late-stage synthesis and application of photoreactive probes derived from direct benzoylation of heteroaromatic C–H bonds

A synthetically-driven, late-stage C–H benzoylation strategy for the expedited preparation and evaluation of heterocyclic alternatives to more classical benzophenone photoreactive probes is reported.