Regiodivergent DH or HD Addition to Alkenes: Deuterohydrogenation versus Hydrodeuterogenation

A Torquoselective Thermal 6π-Electrocyclization Approach to 1,4-Cyclohexadienes via Solvent-Aided Proton Transfer: Experimental and Theoretical Studies

The thermal 6π-electrocyclization of hexatriene typically delivers 1,3-cyclohexadiene (1,3-CHD). However, there is only limited success in directly synthesizing 1,4-cyclohexadiene (1,4-CHD) using such an approach, probably due to the difficulty in realizing thermally-forbidden 1,3-hydride shift after electrocyclic ring closure. The present study shows that by heating (2E,4E,6E)-hexatrienes bearing ester or ketone substituents at the C1-position in a mixture of toluene/MeOH or EtOH (2 : 1) solvents at 90-100 °C, 1,4-CHDs can be selectively synthesized. This is achieved through a torquoselective disrotatory 6π-electrocyclic ring closure followed by a proton-transfer process. The success of this method depends on the polar protic solvent-assisted intramolecular proton transfer from 1,3-CHD to 1,4-CHD, which has been confirmed by deuterium-labeling experiments. There are no reports to date for such a solvent-assisted isomerization. Density functional theory (DFT) studies have suggested that forming 1,3-CHD and subsequent isomerization is a thermodynamically feasible process, regardless of the functional groups involved. Two possible successive polar solvent-assisted proton-transfer pathways have been identified for isomerization.

A metal-free carbon catalyst for oxidative dehydrogenation of aryl cyclohexenes to produce biaryl compounds

A metal-free route based on a carbon catalyst to synthesize biphenyls through oxidative dehydrogenation (ODH) of phenyl cyclohexene has been investigated. Among the samples examined, an air-oxidized active carbon exhibits the best activity with a 9.1 × 10-2 h-1 rate constant, yielding 74% biphenyl in 28 h at 140 °C under five bar O2 in anisole. The apparent activation energy is measured as 54.5 kJ⋅mol-1. The extended reaction scope, consisting of 15 differently substituted phenyl cyclohexenes, shows the wide applicability of the proposed method. The catalyst's good recyclability over six runs suggests this ODH method as a promising route to access the biaryl compounds. In addition, the reaction mechanism is investigated with a combination of X-ray photoelectron spectroscopy, functional group blocking, and model compounds of carbon catalysts and is proposed to be based on the redox cycle of the quinoidic groups on the carbon surface. Additional experiments prove that the addition of the catalytic amount of acid (methanesulfonic acid) accelerates the reaction. In addition, Hammett plot examination suggests the formation of a carbonium intermediate, and its possible structure is outlined.

Rapid Enantiomeric Excess Measurements of Enantioisotopomers by Molecular Rotational Resonance Spectroscopy

Recent work in drug discovery has shown that selectively deuterated small molecules can improve the safety and efficacy for active pharmaceutical ingredients. The advantages derive from changes in metabolism resulting from the kinetic isotope effect when deuterium is substituted for a hydrogen atom at a structural position where rate limiting C-H bond breaking occurs. This application has pushed the development of precision deuteration strategies in synthetic chemistry that can install deuterium atoms with high regioselectivity and with stereocontrol. Copper-catalyzed alkene transfer hydrodeuteration chemistry has recently been shown to have high stereoselectivity for deuteration at the metabolically important benzyl C-H position. In this case, stereocontrol results in the creation of enantioisotopomers-molecules that are chiral solely by virtue of the deuterium substitution-and chiral analysis techniques are needed to assess the reaction selectivity. It was recently shown that chiral tag molecular rotational resonance (MRR) spectroscopy provides a routine way to measure the enantiomeric excess and establish the absolute configuration of enantioisotopomers. High-throughput implementations of chiral tag MRR spectroscopy are needed to support optimization of the chemical synthesis. A measurement methodology for high-throughput chiral analysis is demonstrated in this work. The high-throughput ee measurements are performed using cavity-enhanced MRR spectroscopy, which reduces measurement times and sample consumption by more than an order-of-magnitude compared to the previous enantioisotopomer analysis using a broadband MRR spectrometer. It is also shown that transitions for monitoring the enantiomers can be selected from a broadband rotational spectrum without the need for spectroscopic analysis. The general applicability of chiral tag MRR spectroscopy is illustrated by performing chiral analysis on six enantioisotopomer reaction products using a single molecule as the tag for chiral discrimination.

Precision Deuteration Using Cu-Catalyzed Transfer Hydrodeuteration to Access Small Molecules Deuterated at the Benzylic Position

A highly regio- and chemoselective Cu-catalyzed aryl alkyne transfer hydrodeuteration to access a diverse scope of aryl alkanes precisely deuterated at the benzylic position is described. The reaction benefits from a high degree of regiocontrol in the alkyne hydrocupration step, leading to the highest selectivities reported to date for an alkyne transfer hydrodeuteration reaction. Only trace isotopic impurities are formed under this protocol, and analysis of an isolated product by molecular rotational resonance spectroscopy confirms that high isotopic purity products can be generated from readily accessible aryl alkyne substrates.

Highly selective catalytic transfer hydrodeuteration of cyclic alkenes

Selective deuterium installation into small molecules is becoming increasingly desirable not only for the elucidation of mechanistic pathways and studying biological processes but also because of deuterium's ability to favorably adjust the pharmacokinetic parameters of bioactive molecules. Fused bicyclic moieties, especially those containing heteroatoms, are prevalent in drug discovery and pharmaceuticals. Herein, we report a copper-catalyzed transfer hydrodeuteration of cyclic and heterocyclic alkenes, which enables the synthesis of chromans, quinolinones, and tetrahydronaphthalenes that are precisely deuterated at the benzylic position. We also demonstrate the ability to place one deuterium atom at the homobenzylic site of these scaffolds with high regioselectivity by swapping transfer reagents for their isotopic analogs. Furthermore, examples of chemoselective transfer hydrogenation and transfer deuteration are disclosed, allowing for the simultaneous incorporation of two vicinal hydrogen or deuterium atoms into a double bond.

Enantioselective Synthesis of Enantioisotopomers with Quantitative Chiral Analysis by Chiral Tag Rotational Spectroscopy

Fundamental to the synthesis of enantioenriched chiral molecules is the ability to assign absolute configuration at each stereogenic center, and to determine the enantiomeric excess for each compound. While determination of enantiomeric excess and absolute configuration is often considered routine in many facets of asymmetric synthesis, the same determinations for enantioisotopomers remains a formidable challenge. Here, we report the first highly enantioselective metal‐catalyzed synthesis of enantioisotopomers that are chiral by virtue of deuterium substitution along with the first general spectroscopic technique for assignment of the absolute configuration and quantitative determination of the enantiomeric excess of isotopically chiral molecules. Chiral tag rotational spectroscopy uses noncovalent chiral derivatization, which eliminates the possibility of racemization during derivatization, to perform the chiral analysis without the need of reference samples of the enantioisotopomer.

Recent Developments for the Deuterium and Tritium Labeling of Organic Molecules

Organic compounds labeled with hydrogen isotopes play a crucial role in numerous areas, from materials science to medicinal chemistry. Indeed, while the replacement of hydrogen by deuterium gives rise to improved absorption, distribution, metabolism, and excretion (ADME) properties in drugs and enables the preparation of internal standards for analytical mass spectrometry, the use of tritium-labeled compounds is a key technique all along drug discovery and development in the pharmaceutical industry. For these reasons, the interest in new methodologies for the isotopic enrichment of organic molecules and the extent of their applications are equally rising. In this regard, this Review intends to comprehensively discuss the new developments in this area over the last years (2017-2021). Notably, besides the fundamental hydrogen isotope exchange (HIE) reactions and the use of isotopically labeled analogues of common organic reagents, a plethora of reductive and dehalogenative deuteration techniques and other transformations with isotope incorporation are emerging and are now part of the labeling toolkit.

Highly Regioselective Copper-Catalyzed Transfer Hydrodeuteration of Unactivated Terminal Alkenes

Catalytic transfer hydrodeuteration of unactivated alkenes is challenging because of the requirement that chemically similar hydrogen and deuterium undergo selective insertion across a π-bond. We now report a highly regioselective catalytic transfer hydrodeuteration of unactivated terminal alkenes across a variety of heteroatom- or heterocycle-containing substrates. The base-metal-catalyzed reaction is also demonstrated on two complex natural products. Reaction studies indicate modular conditions that can also be extended to perform either an alkene transfer hydrogenation or transfer deuteration.

Indium-Catalysed Transfer Hydrogenation for the Reductive Cyclisation of 2-Alkynyl Enones towards Trisubstituted Furans

Indium tribromide catalysed the transfer hydrogenation from dihydroaromatic compounds, such as the commercially available γ-terpinene, to enones, which resulted in the cyclisation to trisubstituted furan derivatives. The reaction was initiated by a Michael addition of a hydride nucleophile to the enone subunit followed by a Lewis-acid-assisted cyclisation and the formation of a furan-indium intermediate and a Wheland intermediate derived from the dihydroaromatic starting material. The product was formed by protonation from the Wheland complex and replaced the indium tribromide substituent. In addition, a site-specific deuterium labelling of the dihydroaromatic HD surrogates resulted in site specific labelling of the products and gave useful insights into the reaction mechanism by H-D scrambling.

Indium Tribromide-Catalysed Transfer-Hydrogenation: Expanding the Scope of the Hydrogenation and of the Regiodivergent DH or HD Addition to Alkenes

The transfer‐hydrogenation as well as the regioselective and regiodivergent addition of H−D from regiospecific deuterated dihydroaromatic compounds to a variety of 1,1‐di‐ and trisubstituted alkenes was realised with InBr₃ in dichloro(m)ethane. In comparison with the previously reported BF₃⋅Et₂O‐catalysed process, electron‐deficient aryl‐substituents can be applied reliably and thereby several restrictions could be lifted, and new types of substrates could be transformed successfully in hydrodeuterogenation as well as deuterohydrogenation transfer‐hydrogenation reactions.

Catalytic Transfer Deuteration and Hydrodeuteration: Emerging Techniques to Selectively Transform Alkenes and Alkynes to Deuterated Alkanes

Increasing demand for deuterium-labeled organic molecules has spurred a renewed interest in selective methods for deuterium installation. Catalytic transfer deuteration and transfer hydrodeuteration are emerging as powerful techniques for the selective incorporation of deuterium into small molecules. These reactions not only obviate the use of D₂ gas and pressurized reaction setups but provide new opportunities for selectively installing deuterium into small molecules. Commercial or readily synthesized deuterium donors are typically employed as easy-to-handle reagents for transfer deuteration and hydrodeuteration reactions. In this minireview, recent advances in the catalytic transfer deuteration and hydrodeuteration of alkenes and alkynes for the selective synthesis of deuterated alkanes will be discussed.

Copper-Catalyzed Transfer Hydrodeuteration of Aryl Alkenes with Quantitative Isotopomer Purity Analysis by Molecular Rotational Resonance Spectroscopy

A copper-catalyzed alkene transfer hydrodeuteration reaction that selectively incorporates one hydrogen and one deuterium atom across an aryl alkene is described. The transfer hydrodeuteration protocol is selective across a variety of internal and terminal alkenes and is also demonstrated on an alkene-containing complex natural product analog. Beyond using ¹H, ²H, and ¹³C NMR analysis to measure reaction selectivity, six transfer hydrodeuteration products were analyzed by molecular rotational resonance (MRR) spectroscopy. The application of MRR spectroscopy to the analysis of isotopic impurities in deuteration chemistry is further explored through a measurement methodology that is compatible with high-throughput sample analysis. In the first step, the MRR spectroscopy signatures of all isotopic variants accessible in the reaction chemistry are analyzed using a broadband chirped-pulse Fourier transform microwave spectrometer. With the signatures in hand, measurement scripts are created to quantitatively analyze the sample composition using a commercial cavity enhanced MRR spectrometer. The sample consumption is below 10 mg with analysis times on the order of 10 min using this instrument-both representing order-of-magnitude reduction compared to broadband MRR spectroscopy. To date, these measurements represent the most precise spectroscopic determination of selectivity in a transfer hydrodeuteration reaction and confirm that product regioselectivity ratios of >140:1 are achievable under this mild protocol.