Fast Heck-Cassar-Sonogashira (HCS) Reactions in Green Solvents

A General Concept for the Electronic and Steric Modification of 1-Metallacyclobuta-2,3-dienes: A Case Study of Group 4 Metallocene Complexes

The synthesis of group 4 metal 1-metallacyclobuta-2,3-dienes as organometallic analogues of elusive 1,2-cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis of two Ph substituted dilithiated ligand precursors for the preparation of four new 1-metallacyclobuta-2,3-dienes [rac-(ebthi)M] (M=Ti, Zr; ebthi=1,2-ethylene-1,10-bis(η5-tetrahydroindenyl)). The organolithium compounds [Li2(RC3Ph)] (1 b: R=Ph, 1 c: R=SiMe3) as well as the metallacycles of the general formula [rac-(ebthi)M(R1C3R2)] (2 b: M=Ti, R1=R2=Ph, 2 c: M=Ti, R1=Ph, R2=SiMe3; 3 b: M=Zr, R1=R2=Ph; 3 c: M=Zr, R1=Ph, R2=SiMe3) were fully characterised. Single crystal X-ray diffraction and quantum chemical bond analysis of the Ti and Zr complexes reveal ligand influence on the biradicaloid character of the titanocene complexes. X-band EPR spectroscopy of structurally similar Ti complexes [rac-(ebthi)Ti(Me3SiC3SiMe3)] (2 a), 2 b, and 2 c was carried out to evaluate the accessibility of an EPR active triplet state. Cyclic voltammetry shows that introduction of Ph groups renders the complexes easier to reduce. 13C CPMAS NMR analysis provides insights into the cause of the low field shift of the resonances of metal-bonded carbon atoms and provides evidence of the absence of the β-C-Ti interaction.

Electronically flexible PYA ligands for efficient palladium-catalyzed α-arylation of ketones

Palladium-catalyzed cross-coupling chemistry and in particular ketone α-arylation has been relying on a rather narrow range of supporting ligands with almost no alternatives to phosphines and N-heterocyclic carbenes. Here we introduce a class of well-defined palladium(II) complexes supported by N,N'-chelating and electronically flexible pyridylidene amide (PYA)-pyridyl ligands as catalysts for efficient α-arylation of ketones. Steric and electronic variations of the N,N'-bidentate ligand indicate that the introduction of an ortho-methyl group on the pyridinum heterocycle of the PYA ligand enhances the arylation rate and prevents catalyst deactivation, reaching turnover numbers up to 7300 and turnover frequencies of almost 10 000 h-1, which is similar to that of the best phosphine complexes known to date. Introducing a shielding xylyl substituent accelerates catalysis further, however at the expense of lower selectivity towards arylated ketones. Substrate scope investigations revealed that both electron-rich and -poor aryl bromides as well as a broad range of electronically and sterically modified ketones are efficiently converted, including aliphatic ketones. Mechanistic investigations using Hammett and Eyring analyses indicated that both, oxidative addition and reductive elimination are relatively fast, presumably as a consequence of the electronic flexibility of the PYA ligand, while enolate coordination was identified as the turnover-limiting step.

Room-Temperature, Copper-Free, and Amine-Free Sonogashira Reaction in a Green Solvent: Synthesis of Tetraalkynylated Anthracenes and In Vitro Assessment of Their Cytotoxic Potentials

The multifold Sonogashira coupling of a class of aryl halides with arylacetylene in the presence of an equivalent of Cs₂CO₃ has been accomplished using a combination of Pd(CH₃CN)₂Cl₂ (0.5 mol %) and cataCXium A (1 mol %) under copper-free and amine-free conditions in a readily available green solvent at room temperature. The protocol was used to transform several aryl halides and alkynes to the corresponding coupled products in good to excellent yields. The rate-determining step is likely to involve the oxidative addition of Ar-X. The green protocol provides access to various valuable polycyclic aromatic hydrocarbons (PAHs) with exciting photophysical properties. Among them, six tetraalkynylated anthracenes have been tested for their anticancer properties on the human triple-negative breast cancer (TNBC) cell line MDA-MB-231 and human dermal fibroblasts (HDFs). The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay was performed to find out the IC₅₀ concentration and lethal dose. The compounds being intrinsically fluorescent, their cellular localization was checked by live cell fluorescence imaging. 4',6-Diamidino-2-phenylindole (DAPI) and propidium iodide (PI) staining was performed to check apoptosis and necrosis, respectively. All of these studies have shown that anthracene and its derivatives can induce cell death via DNA damage and apoptosis.

Fast MacMillan's Imidazolidinone-Catalyzed Enantioselective Synthesis of Polyfunctionalized 4-Isoxazoline Scaffolds

The enantioselective 1,3-dipolar cycloaddition of nitrones and arylpropionaldehydes to generate highly functionalized scaffolds for application in drug discovery was herein investigated. The use of a second-generation MacMillan catalyst as hydrochloride salt consistently accelerated the reaction speed, allowing a decrease in the reaction time up to >100 times, still affording 4-isoxazolines with good to excellent enantiomeric ratios at room temperature. As a proof of concept, further functionalization of the isoxazoline core through Pd-catalyzed cross-coupling was performed, generating differently functionalized chemical architectures in high yield.

Synthesis of (Deoxy)difluoromethylated Phosphines by Reaction of R2P(O)H with TMSCF3 and Their Application in Cu(I) Clusters in Sonogashira Coupling

R₂PCF₂H ligands and their R₂P(O)CF₂H precursors were synthesized from R₂P(O)H with TMSCF₃ by simply modulating the H₂O concentration via deoxydifluoromethylation and difluoromethylation. The air sensitive R₂PCF₂H phosphines can be stabilized in Cu(I) clusters as ligands. Within these Cu(I) clusters, the Sonogashira cross-coupling reaction can proceed fast and efficiently using terminal alkynes and aryl iodides within 15 min at room temperature under air to give a variety of diaryl(alkyl)acetylenes in good yields (49 examples, yields of ≤99%). Six of the internal alkynes present in drug precursors can be obtained using this protocol in good yields. The mechanism is proposed on the basis of control experiments.

Hypothesis-Driven, Structure-Based Design in Photopharmacology: The Case of eDHFR Inhibitors

Photopharmacology uses light to regulate the biological activity of drugs. This precise control is obtained through the incorporation of molecular photoswitches into bioactive molecules. A major challenge for photopharmacology is the rational design of photoswitchable drugs that show light-induced activation. Computer-aided drug design is an attractive approach toward more effective, targeted design. Herein, we critically evaluated different structure-based approaches for photopharmacology with Escherichia coli dihydrofolate reductase (eDHFR) as a case study. Through the iterative examination of our hypotheses, we progressively tuned the design of azobenzene-based, photoswitchable eDHFR inhibitors in five design–make–switch–test–analyze cycles. Targeting a hydrophobic subpocket of the enzyme and a specific salt bridge only with the thermally metastable cis-isomer emerged as the most promising design strategy. We identified three inhibitors that could be activated upon irradiation and reached potencies in the low-nanomolar range. Above all, this systematic study provided valuable insights for future endeavors toward rational photopharmacology.

Replacement of Less-Preferred Dipolar Aprotic and Ethereal Solvents in Synthetic Organic Chemistry with More Sustainable Alternatives

Dipolar aprotic and ethereal solvents comprise just over 40% of all organic solvents utilized in synthetic organic, medicinal, and process chemistry. Unfortunately, many of the common "go-to" solvents are considered to be "less-preferable" for a number of environmental, health, and safety (EHS) reasons such as toxicity, mutagenicity, carcinogenicity, or for practical handling reasons such as flammability and volatility. Recent legislative changes have initiated the implementation of restrictions on the use of many of the commonly employed dipolar aprotic solvents such as dimethylformamide (DMF) and N-methyl-2-pyrrolidinone (NMP), and for ethers such as 1,4-dioxane. Thus, with growing legislative, EHS, and societal pressures, the need to identify and implement the use of alternative solvents that are greener, safer, and more sustainable has never been greater. Within this review, the ubiquitous nature of dipolar aprotic and ethereal solvents is discussed with respect to the physicochemical properties that have made them so appealing to synthetic chemists. An overview of the current legislative restrictions being imposed on the use of dipolar aprotic and ethereal solvents is discussed. A variety of alternative, safer, and more sustainable solvents that have garnered attention over the past decade are then examined, and case studies and examples where less-preferable solvents have been successfully replaced with a safer and more sustainable alternative are highlighted. Finally, a general overview and guidance for solvent selection and replacement are included in the Supporting Information of this review.

Glycosyl Triazole Ligand for Temperature-Dependent Competitive Reactions of Cu-Catalyzed Sonogashira Coupling and Glaser Coupling

Glycosyl triazoles have been introduced as efficient ligands for the Cu-catalyzed Sonogashira reaction to overcome the challenges of sideways homocoupling reactions in Cu catalysis in this reaction. The atmospheric oxygen in a sealed tube did not affect the coupling, and no need of complete exclusion of oxygen was experienced in the presence of glycohybrid triazole ligand L3. High product yields were obtained at 130 °C for a variety of substrates including aliphatic and aromatic terminal alkynes and differently substituted aromatic halides including 9-bromo noscapine. In contrast, at room temperature, a very low loading of the L3-Cu catalytic system could produce excellent yields in Glaser coupling including homocoupling and heterocoupling of a variety of aliphatic and aromatic alkynes.

Bright fluorescent purine analogues as promising probes

Modified bright fluorescent nucleosides that respond to the microenvironment have great potential as probes. A series of novel 8-(phenylethynyl)phenylated 2-amino-2'-deoxyadenosine and 2'-deoxyisoguanosine derivatives have been synthesized by Sonogashira-type coupling reaction and Suzuki reaction. The maximum emission of the new compounds is in the visible region, with strong solvatochromicity and pH-dependent fluorescent properties. Furthermore, some of them exhibit bright fluorescence emissions in various solvents (ε × Φ = 4000-39,000 cm-1 M-1). These consequences indicate that purine analogues could respond to the microenvironment and serve as promising fluorescent probes.Supplemental data for this article is available online at https://doi.org/10.1080/15257770.2021.2004418 .

A Waste-Minimized Approach to Cassar-Heck Reaction Based on POLITAG-Pd0 Heterogeneous Catalyst and Recoverable Acetonitrile Azeotrope

Three different Pd0 -based heterogeneous catalysts were developed and tested in the Cassar-Heck reaction (i. e., copper-free Sonogashira reaction) aiming at the definition of a waste minimized protocol. The cross-linked polymeric supports used in this investigation were designed to be adequate for different reaction media and were decorated with different pincer-type ionic ligands having the role of stabilizing the formation and dimension of palladium nanoparticles. Among the ionic tags tested, bis-imidazolium showed the best performances in terms of efficiency and durability of the metal catalytic system. Eventually, aqueous acetonitrile azeotrope was selected as the reaction medium as it allowed the best catalytic efficiency combined with easy recovery and reuse. Finally, the synergy between the selected catalyst and reaction medium allowed to obtain highly satisfactory isolated yields of a variety of substrates while using a low amount of metal catalyst. The high performance of the designed POLymeric Ionic TAG (POLITAG)-Pd0 , along with its good selectivity achieved in a copper-free process, also led to a simplified purification procedure allowing the minimization of the waste generated as also proven by the very low E-factor values (1.4-5) associated.

Palladium Catalyst Recycling for Heck-Cassar-Sonogashira Cross-Coupling Reactions in Green Solvent/Base Blend

The identification of a green, versatile, user-friendly, and efficient methodology is necessary to facilitate the use of Heck-Cassar-Sonogashira (HCS) cross-coupling reaction in drug discovery and industrial production in the pharmaceutical segment. The Heck-Cassar and Sonogashira protocols, using N-hydroxyethylpyrrolidone (HEP)/water/N,N,N',N'-tetramethyl guanidine (TMG) as green solvent/base mixture and sulfonated phosphine ligands, allowed to recycle the catalyst, always guaranteeing high yields and fast conversion under mild conditions, with aryl iodides, bromides, and triflates. No catalyst leakage or metal contamination of the final product were observed during the HCS recycling. To our knowledge, a turnover number (TON) up to 2375, a turnover frequency (TOF) of 158 h-1 , and a process mass intensity (PMI) around 7 that decreased around 3 after solvent, base, and palladium recovery, represent one of the best results to date using a sustainable protocol. The Heck-Cassar protocol using sSPhos was successfully applied to the telescoped synthesis of Erlotinib (TON: 1380; TOF: 46 h-1 ).