Chemoselective Schwartz Reagent Mediated Reduction of Isocyanates to Formamides

Gallium Hydride-Catalyzed Selective Hydroboration of Unsaturated Organic Substrates

The first examples of tetrasubstituted conjugated bis-guanidinate (CBG) supported monomeric and thermally stable gallium dihalides [LGaX2], (X=Cl (Ga-Cl), I (Ga-I)) and dihydride (Ga-H) [LGaH2] (where L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr)}; Ar=2,6-Et2-C6H3) compounds are reported. The reaction of in situ generated LLi with 1.0 equiv. GaX3 (X=Cl, I) afforded compounds Ga-Cl and Ga-I. The reaction between Ga-Cl and Li[HBEt3] in benzene yielded the dihydride compound Ga-H. All reported compounds (Ga-Cl, Ga-I, and Ga-H) were characterized by NMR, HRMS, and single-crystal X-ray diffraction studies. Ga-H was probed for the hydroboration of carbodiimides (CDI), isocyanates, and isothiocyanates with HBpin. Compound Ga-H was also found effective for the catalytic hydroboration of imines, nitriles, alkynes, esters, and formates, affording the corresponding products in quantitative yields. Stoichiometric reactions with a CDI were performed to establish the catalytic cycle.

Carbodiimide and Isocyanate Hydroboration by a Cyclic Carbodiphosphorane Catalyst

We report hydroboration of carbodiimide and isocyanate substrates catalyzed by a cyclic carbodiphosphorane catalyst. The cyclic carbodiphosphorane outperformed the other Lewis basic carbon species tested, including other zerovalent carbon compounds, phosphorus ylides, an N-heterocyclic carbene, and an N-heterocyclic olefin. Hydroborations of seven carbodiimides and nine isocyanates were performed at room temperature to form N-boryl formamidine and N-boryl formamide products. Intermolecular competition experiments demonstrated the selective hydroboration of alkyl isocyanates over carbodiimide and ketone substrates. DFT calculations support a proposed mechanism involving activation of pinacolborane by the carbodiphosphorane catalyst, followed by hydride transfer and B-N bond formation.

Base-mediated homologative rearrangement of nitrogen-oxygen bonds of N-methyl-N-oxyamides

Due to the well known reactivity of C(O)-N functionalities towards canonical C1-homologating agents (e.g. carbenoids, diazomethane, ylides), resulting in the extrusion of the N-centered fragment en route to carbonyl compounds, formal C1-insertions within N-O bonds still remain obscure. Herein, we document the homologative transformation of N-methyl-N-oxyamides - with high tolerance for diverse O-substituents - into N-acyl-N,O-acetals. Under controlled basic conditions, the N-methyl group of the same starting materials acts as a competent precursor of the methylene synthon required for the homologation. The logic is levered on the formation of an electrophilic iminium ion (via N-O heterolysis) susceptible to nucleophilic attack by the alkoxide previously expulsed. The procedure documents genuine chemocontrol and flexibility, as judged by the diversity of substituents placed on both amide and nitrogen linchpins. The mechanistic rationale was validated through experiments conducted on D-labeled materials which unambiguously attributed the origin of the methylene fragment to the N-methyl group of the starting compounds.

Controlled reduction of isocyanates to formamides using monomeric magnesium

This work describes a transition metal-free methodology involving an efficient and controlled reduction of isocyanates to only formamide derivatives using pinacolborane (HBpin) as the hydrogenating agent and a bis(phosphino)carbazole ligand stabilized magnesium methyl complex (1) as the catalyst. A large number of substrates undergo selective hydroboration and give exclusively N-boryl formamides.

Selective hydroboration of electron-rich isocyanates by an NHC-copper(I) alkoxide

The (IPr)CuOtBu catalysed reduction of 11 aryl and alkyl isocyanates with pinacolborane gave only the boraformamides, pinBN(R)C(O)H, in most cases. Overreduction, which hampers almost all isocyanate hydroborations, was restricted to electron poor aryl isocyanates (4-NC-C₆H₄NCO, 4-F₃C-C₆H₄NCO, 3-O₂N-C₆H₄NCO). Computational analysis showed stability of [(IPr)CuH]2, which was proposed to be the catalyst resting state, drives selectivity, suggesting an approach to prevent overreduction in future work. In the case of iPrNCO, formation of this species renders overreduction kinetically inaccessible. For 4-NC-C₆H₄NCO, however, the barrier height for the first step of over-reduction is much lower, even relative to [(IPr)CuH]2, resulting in unselective reduction.

Hydroboration of isocyanates: cobalt-catalyzed vs. catalyst-free approaches

Hydroboration of isocyanates with HBPin was demonstrated using both catalytic and catalyst-free approaches. In arene solvents, the reactions employed the commercially available and bench-stable Co(acac)₂/dpephos (dpephos = bis[(2-diphenylphosphino)phenyl] ether) pre-catalyst and proved chemodivergent, showing the formation of either formamides or N-methylamines, depending on the concentration of HBPin and the reaction conditions used. Catalytic monohydroboration of isocyanates to formamides was found to be highly chemoselective, tolerating alkenes, alkynes, aryl halides, esters, carboxamides, nitriles, nitroarenes and heteroaromatic functionalities. The catalyst-free hydroboration reactions have been demonstrated in neat HBPin. Whereas monohydroboration proved less selective compared with Co(acac)₂/dpephos-catalyzed transformations, selective deoxygenative hydroboration of isocyanates to N-methylamines was observed under catalyst-free conditions.

A uniformly anchored zirconocene complex on magnetic reduced graphene oxide (rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2)) as a novel and reusable nanocatalyst for synthesis of N-arylacetamides and reductive-acetylation of nitroarenes

In this study, a crafted zirconocene complex on rGO@Fe3O4 as a novel magnetic nanocatalyst was synthesized and then characterized using FT-IR, SEM, EDX, VSM, ICP-OES, TGA, BET and MS analyses. Next, catalytic activity of the prepared nanocomposite rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) towards successful reduction of aromatic nitro compounds to arylamines using N2H4·H2O (80%) was investigated. The examined nanocatalyst also showed perfect catalytic activity for reductive-acetylation of aromatic nitro compounds to the corresponding N-arylacetamides without isolation of the prepared in situ amines using the N2H4·H2O/Ac2O system. Furthermore, acetylation of the commercially available arylamines to the corresponding N-arylacetamides was carried out by acetic anhydride in the presence of the rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) nanocomposite. All reactions were carried out in refluxing EtOH as a green solvent to afford the products in high yields. The obtained results exhibited that the nanocomposite of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) showed a great catalytic activity in comparison to rGO and rGO@Fe3O4 as the parent constituents. Recovery and reusability of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) were also examined for 8 consecutive cycles without significant loss of the catalytic activity. This establishes the sustainable anchoring of the zirconocene complex on the surface and mesopores of the rGO@Fe3O4 nanohybrid system.

Simple silver(I)-salt catalyzed selective hydroboration of isocyanates, pyridines, and quinolines

AgSbF₆ has been established as an effective catalyst for the hydroboration of structurally and electronically diverse isocyanates under ligand- and solvent-free conditions which selectively yielded either N-boryl formamides or N-boryl methylamines under different conditions. Further, various N-heterocycles can be selectively hydroborated using this simple catalytic system; pyridine derivatives undergo preferential 1,4 hydroboration whereas the formation of tetrahydroquinoline (after hydrolysis) via complete heterocycle hydrogenation was observed for quinolines.

Replacement of Less-Preferred Dipolar Aprotic and Ethereal Solvents in Synthetic Organic Chemistry with More Sustainable Alternatives

Dipolar aprotic and ethereal solvents comprise just over 40% of all organic solvents utilized in synthetic organic, medicinal, and process chemistry. Unfortunately, many of the common "go-to" solvents are considered to be "less-preferable" for a number of environmental, health, and safety (EHS) reasons such as toxicity, mutagenicity, carcinogenicity, or for practical handling reasons such as flammability and volatility. Recent legislative changes have initiated the implementation of restrictions on the use of many of the commonly employed dipolar aprotic solvents such as dimethylformamide (DMF) and N-methyl-2-pyrrolidinone (NMP), and for ethers such as 1,4-dioxane. Thus, with growing legislative, EHS, and societal pressures, the need to identify and implement the use of alternative solvents that are greener, safer, and more sustainable has never been greater. Within this review, the ubiquitous nature of dipolar aprotic and ethereal solvents is discussed with respect to the physicochemical properties that have made them so appealing to synthetic chemists. An overview of the current legislative restrictions being imposed on the use of dipolar aprotic and ethereal solvents is discussed. A variety of alternative, safer, and more sustainable solvents that have garnered attention over the past decade are then examined, and case studies and examples where less-preferable solvents have been successfully replaced with a safer and more sustainable alternative are highlighted. Finally, a general overview and guidance for solvent selection and replacement are included in the Supporting Information of this review.

Partial reductions of carboxylic acids and their derivatives to aldehydes

Recent advances in partial reductions of inert carboxylic acids and their derivatives to active aldehydes are reviewed.

N-Substituted S-Alkyl Carbamothioates in the Synthesis of Nitrogen-containing Functional Derivatives of the Adamantane Series

A series of new asymmetric ureas, urethanes, and other derivatives of the framework structure have been synthesized by the reactions of adamantan-1-yl isocyanate generated in situ by the thermolysis of carbamothioates with nitrogen-containing nucleophiles and alcohols.

Catalyst free N-formylation of aromatic and aliphatic amines exploiting reductive formylation of CO2 using NaBH4

Herein, we report a sustainable approach for N-formylation of aromatic as well as aliphatic amines using sodium borohydride and carbon dioxide gas. The developed approach is catalyst free, and does not need pressure or a specialized reaction assembly. The reductive formylation of CO₂ with sodium borohydride generates formoxy borohydride species in situ, as confirmed by ¹H and ¹¹B NMR spectroscopy. The in situ formation of formoxy borohydride species is prominent in formamide based solvents and is critical for the success of the N-formylation reactions. The formoxy borohydride is also found to promote transamidation reactions as a competitive pathway along with reductive functionalization of CO₂ with amine leading to N-formylation of amines.

Herein, we report a sustainable approach for N-formylation of aromatic as well as aliphatic amines using sodium borohydride and carbon dioxide gas.

Zinc Hydride Catalyzed Chemoselective Hydroboration of Isocyanates: Amide Bond Formation and C=O Bond Cleavage

Herein, a remarkable conjugated bis-guanidinate (CBG) supported zinc hydride, [{LZnH}₂ ; L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr); Ar=2,6-Et₂ -C₆ H₃ }] (I) catalyzed partial reduction of heteroallenes via hydroboration is reported. A large number of aryl and alkyl isocyanates, including electron-donating and withdrawing groups, undergo reduction to obtain selectively N-boryl formamide, bis(boryl) hemiaminal and N-boryl methyl amine products. The compound I effectively catalyzes the chemoselective reduction of various isocyanates, in which the construction of the amide bond occurs. Isocyanates undergo a deoxygenation hydroboration reaction, in which the C=O bond cleaves, leading to N-boryl methyl amines. Several functionalities such as nitro, cyano, halide, and alkene groups are well-tolerated. Furthermore, a series of kinetic, control experiments and structurally characterized intermediates suggest that the zinc hydride species are responsible for all reduction steps and breaking the C=O bond.

Fast Addition of s-Block Organometallic Reagents to CO2 -Derived Cyclic Carbonates at Room Temperature, Under Air, and in 2-Methyltetrahydrofuran

Fast addition of highly polar organometallic reagents (RMgX/RLi) to cyclic carbonates (derived from CO₂ as a sustainable C1 synthon) has been studied in 2-methyltetrahydrofuran as a green reaction medium or in the absence of external volatile organic solvents, at room temperature, and in the presence of air/moisture. These reaction conditions are generally forbidden with these highly reactive main-group organometallic compounds. The correct stoichiometry and nature of the polar organometallic alkylating or arylating reagent allows straightforward synthesis of: highly substituted tertiary alcohols, β-hydroxy esters, or symmetric ketones, working always under air and at room temperature. Finally, an unprecedented one-pot/two-step hybrid protocol is developed through combination of an Al-catalyzed cycloaddition of CO₂ and propylene oxide with the concomitant fast addition of RLi reagents to the in situ and transiently formed cyclic carbonate, thus allowing indirect conversion of CO₂ into the desired highly substituted tertiary alcohols without need for isolation or purification of any reaction intermediates.

Chemoselective Reactions of Isocyanates with Secondary Amides: One-Pot Construction of 2,3-Dialkyl-Substituted Quinazolinones

A facile method for the preparation of 2,3-dialkyl-substituted quinazolinones from readily available N-arylamides and commercial isocyanates was developed. This one-pot procedure involves the chemoselective activation of the secondary amide with Tf₂O/2-Br-Pyr, the sequential addition of isocyanate, and cyclization. The mild reaction is general for a wide range of substrates and can be run on a gram scale.

Taking advantage of lithium monohalocarbenoid intrinsic α-elimination in 2-MeTHF: controlled epoxide ring-opening en route to halohydrins

The intrinsic degradative α-elimination of Li carbenoids somehow complicates their use in synthesis as C1-synthons. Nevertheless, we herein report how boosting such an α-elimination is a straightforward strategy for accomplishing controlled ring-opening of epoxides to furnish the corresponding β-halohydrins. Crucial for the development of the method is the use of the eco-friendly solvent 2-MeTHF, which forces the degradation of the incipient monohalolithium, due to the very limited stabilizing effect of this solvent on the chemical integrity of the carbenoid. With this approach, high yields of the targeted compounds are consistently obtained under very high regiocontrol and, despite the basic nature of the reagents, no racemization of enantiopure materials is observed.

Direct synthesis of anomeric tetrazolyl iminosugars from sugar-derived lactams

Herein we present the direct asymmetric synthesis of tetrazole-functionalized 1-deoxynojirimycin derivatives from simple sugars via a Schwartz’s reagent-mediated reductive amide functionalization followed by a variant of the Ugi–azide multicomponent reaction. The anomeric configurations of two products were unambiguously confirmed by X-ray analysis. This work also describes examples of interesting further transformations of the title products. Finally, some surprising observations regarding the mechanism of their formation were made.

Fe3O4@GlcA@Cu-MOF: A Magnetic Metal-Organic Framework as a Recoverable Catalyst for the Hydration of Nitriles and Reduction of Isothiocyanates, Isocyanates, and Isocyanides

A novel magnetic metal-organic framework (Fe₃O₄@GlcA@Cu-MOF) has been prepared and characterized by spectroscopic, microscopic, and magnetic techniques. This magnetically separable catalyst exhibited high catalytic activity for nitrile hydration and the ability to reduce isothiocyanates, isocyanates, and isocyanides with excellent activity and selectivity without any additional reducing agent.

A Practical Approach for the Transamidation of N,N-Dimethyl Amides with Primary Amines Promoted by Sodium tert-Butoxide under Solvent-Free Conditions

A practical sodium tert-butoxide (NaOtBu)-mediated protocol is disclosed for the transamidation of various N,N-dimethyl amides with primary amines to afford the corresponding amides in moderate to good yields at room temperature under solvent-free conditions. This protocol features a facile work-up procedure and good functional group compatibility, especially for N,N-dimethyl amides with long-chain alkyl groups and heteroatom-containing amines. Notably, a few representative gram-scale reactions proceed smoothly to furnish the desired amides in high yields, which demonstrates the potential of this process for further practical applications. Several control experiments are carried out and a plausible mechanism is provided.

Ultrafast amidation of esters using lithium amides under aerobic ambient temperature conditions in sustainable solvents

Using 2-methyl THF as solvent enables efficient and ultrafast amidation of esters by lithium amides at room temperature in air, edging closer towards reaching air- and moisture-compatible polar organometallic chemistry.

Lithium amides constitute one of the most commonly used classes of reagents in synthetic chemistry. However, despite having many applications, their use is handicapped by the requirement of low temperatures, in order to control their reactivity, as well as the need for dry organic solvents and protective inert atmosphere protocols to prevent their fast decomposition. Advancing the development of air- and moisture-compatible polar organometallic chemistry, the chemoselective and ultrafast amidation of esters mediated by lithium amides is reported. Establishing a novel sustainable access to carboxamides, this has been accomplished via direct C–O bond cleavage of a range of esters using glycerol or 2-MeTHF as a solvent, in air. High yields and good selectivity are observed while operating at ambient temperature, without the need for transition-metal mediation, and the protocol extends to transamidation processes. Pre-coordination of the organic substrate to the reactive lithium amide as a key step in the amidation processes has been assessed, enabling the structural elucidation of the coordination adduct [{Li(NPh₂)(O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CPh(NMe₂))}₂] (8) when toluene is employed as a solvent. No evidence for formation of a complex of this type has been found when using donor THF as a solvent. Structural and spectroscopic insights into the constitution of selected lithium amides in 2-MeTHF are provided that support the involvement of small kinetically activated aggregates that can react rapidly with the organic substrates, favouring the C–O bond cleavage/C–N bond formation processes over competing hydrolysis/degradation of the lithium amides by moisture or air.

The synthesis of unnatural α-alkyl- and α-aryl-substituted serine derivatives

The synthesis of α-aryl- and α-alkyl-substituted serine derivatives via [3,3]-sigmatropic rearrangement of allyl carbamates as a key step is reported. Allyl carbamates were obtained from the corresponding allyl alcohols. The former were prepared through three approaches. Aryl-substituted ones were synthesized via the Stille coupling reaction of aryl iodides with enantiomerically enriched vinyl stannanes. Conversely, alkyl-substituted allyl alcohols were prepared by an analogous strategy involving the Negishi coupling reaction of enantiomerically enriched vinyl iodides or by enzymatic kineric resolution of the corresponding racemic alcohols.

Highly chemoselective difluoromethylative homologation of iso(thio)cyanates: expeditious access to unprecedented α,α-difluoro(thio)amides

The new motif - α,α-difluoromethyl thioamide - has been assembled starting from isothiocyanate (as thioamide precursor) and a formal difluoromethyl-carbanion generated from commercially available TMSCHF2. Upon proper activation of this reagent with potassium tert-amylate, the high-yielding transfer of the difluorinated nucleophile takes place under high chemocontrol. Various sensitive functionalities (e.g. ester, nitrile, nitro, azido groups) can be accommodated across the isothiocyanate core, thus allowing a wide scope. The methodology is highly flexible and adaptable to prepare analogous α,α-difluoromethyl oxoamides by conveniently using isocyanates as the electrophilic building-blocks.

Chemoselective reduction of isothiocyanates to thioformamides mediated by the Schwartz reagent

Thioformamides are easily prepared – under full chemocontrol – through the partial reduction of isothiocyanates with the in situ generated Schwartz reagent.

Homologation chemistry with nucleophilic α-substituted organometallic reagents: chemocontrol, new concepts and (solved) challenges

The transfer of a reactive nucleophilic CH2X unit into a preformed bond enables the introduction of a fragment featuring the exact and desired degree of functionalization through a single synthetic operation. The instability of metallated α-organometallic species often poses serious questions regarding the practicability of using this conceptually intuitive and simple approach for forming C-C or C-heteroatom bonds. A deep understanding of processes regulating the formation of these nucleophiles is a precious source of inspiration not only for successfully applying theoretically feasible transformations (i.e. determining how to employ a given reagent), but also for designing new reactions which ultimately lead to the introduction of molecular complexity via short experimental sequences.

A practical guide for using lithium halocarbenoids in homologation reactions

ABSTRACT

Lithium halocarbenoids are versatile reagents for accomplishing homologation processes. The fast α-elimination they suffer has been considered an important limitation for their extensive use. Herein, we present a series of practical considerations for an effective employment in the homologation of selected carbon electrophiles.

GRAPHICAL ABSTRACT

Enamines as Surrogates of Alkene Carbanions for the Reductive Alkenylation of Secondary Amides: An Approach to Allylamines

A new strategy to construct allylamines through reductive alkenylation of secondary amides with enamines is reported. The method features the use of trifluoromethanesulfonic anhydride as an activation reagent of amides, and enamines as unconventional alkenylation reagents. In this manner, enamines serve as surrogates of alkene carbanions instead of the classical enolates equivalents. A possible mechanism involving a Hoffmann-like elimination of the amine-borane complex intermediate is proposed.

Isocyanates and isothiocyanates as versatile platforms for accessing (thio)amide-type compounds

The addition of carbon (Grignard and organolithium reagents) and hydride nucleophiles (Schwartz reagent) to isocyanates and isothiocyanates constitutes a versatile, direct and high yielding approach to the synthesis of functionalized (thio)amide derivatives including haloamides and formamides. The chemoselective delivery of a nucleophilic (eventually configurationally stable) organometallic species to a given iso(thio)cyanate is the crucial parameter for the success of the strategy. Thus, the influence of the factors governing classical methodologies (e.g. dehydrative condensation) such as steric hindrance and electronic properties of the reactants become practically negligible.

Chemoselective direct reductive trifluoromethylation of amides: a flexible access to functionalized α-trifluoromethylamines

A one-pot method is reported for the direct transformation of secondary amides to α-trifluoromethylamines.