The “Fully Catalytic System” in Mitsunobu Reaction Has Not Been Realized Yet

Electrochemical Azo-free Mitsunobu-type Reaction

The classic chemical Mitsunobu reaction suffers from the need of excess alcohol activation reagents and the generation of significant by-products. Efforts to overcome these limitations have resulted in numerous creative solutions, but the substrate scope of these catalytic processes remains limited. Here we report an electrochemical Mitsunobu-type reaction, which features azo-free alcohol activation and broad substrate scope. This user-friendly technology allows a vast collection of heterocycles as the nucleophile, which can couple with a series of chiral cyclic and acyclic alcohols in moderate to high yields and excellent ee's. This practical reaction is scalable, chemoselective, uses simple Electrasyn setup with inexpensive electrodes and requires no precaution to exclude air and moisture. The synthetic utility is further demonstrated on the structural modification of diverse bioactive natural products and pharmaceutical derivatives and its straightforward application in a multiple-step synthesis of a drug candidate.

(3+2) Annulation of 4-Acetoxy Allenoate with Aldimine Enabled by AgF-Assisted P(III)/P(V) Catalysis

A phosphine-catalyzed (3+2) annulation of 4-acetoxy allenoate and aldimine with the assistance of AgF is described. The success of this reaction hinges on the metathesis between the enolate-phosphonium zwitterion and AgF, leading to a key intermediate comprising of silver enolate and a fluorophosphorane P(V)-moiety. The former is able to undergo a Mannich reaction with aldimine, whereas the latter initiates a cascade sequence of AcO-elimination/aza-addition, thus furnishing the P(III)/P(V) catalysis. By taking advantage of the silver enolate, a preliminary attempt at an asymmetric variant was conducted with the combination of an achiral phosphine catalyst and a chiral bis(oxazolinyl)pyridine ligand (PyBox), giving moderate enantioselectivity.

Catalytic Vilsmeier-Haack Reactions for C1-Deuterated Formylation of Indoles

The Vilsmeier-Haack reaction is a powerful tool to introduce formyl groups into electron-rich arenes, but its wide application is significantly restricted by stoichiometric employment of caustic POCl₃. Herein, we reported a catalytic version of the Vilsmeier-Haack reaction enabled by a P(III)/P(V)═O cycle. This catalytic reaction provides a facile and efficient route for the direct construction of C1-deuterated indol-3-carboxaldehyde under mild conditions with stoichiometric DMF-d7 as the deuterium source. The products feature a remarkably higher deuteration level (>99%) than previously reported ones and are not contaminated by the likely unselective deuteration at other sites. The present transformation can also be used to transfer other carbonyl groups. Further downstream derivatizations of these deuterated products manifested their potential applications in the synthesis of deuterated bioactive molecules. Mechanistic insight was disclosed from studies of kinetics and intermediates.

Strategy for the Use of Molecular Oxygen in Organic Synthesis

Our recent studies on the development of new synthetic methods using molecular oxygen (O2), which is an environmentally friendly oxidant, are described in this Account. The character of O2 as an electron acceptor can be utilized for activation of simple organic molecules to generate reactive species. Such reactive species are applicable to advanced molecular transformation, such as C–C and C–X (X = heteroatom) bond formation, functionalization of inactivated C(sp3)–H, and catalytic Mitsunobu reaction, by avoiding direct quenching of the reactive species by O2.

1 Introduction

2 Reactions with Iron Catalysts and Oxygen

2.1 Reactions Using Redox Hydration of Alkenes

2.2 Reactions Using Oxidation of Heteroatoms

3 Reactions with tert-Butyl Nitrite and Oxygen

4 Conclusion

Main Group Redox Catalysis of Organopnictogens: Vertical Periodic Trends and Emerging Opportunities in Group 15

A growing number of organopnictogen redox catalytic methods have emerged-especially within the past 10 years-that leverage the plentiful reversible two-electron redox chemistry within Group 15. The goal of this Perspective is to provide readers the context to understand the dramatic developments in organopnictogen catalysis over the past decade with an eye toward future development. An exposition of the fundamental differences in the atomic structure and bonding of the pnictogens, and thus the molecular electronic structure of organopnictogen compounds, is presented to establish the backdrop against which organopnictogen redox reactivity-and ultimately catalysis-is framed. A deep appreciation of these underlying periodic principles informs an understanding of the differing modes of organopnictogen redox catalysis and evokes the key challenges to the field moving forward. We close by addressing forward-looking directions likely to animate this area in the years to come. What new catalytic manifolds can be developed through creative catalyst and reaction design that take advantage of the intrinsic redox reactivity of the pnictogens to drive new discoveries in catalysis?

1,3-Diphenyldisiloxane Enables Additive-Free Redox Recycling Reactions and Catalysis with Triphenylphosphine

The recently reported chemoselective reduction of phosphine oxides with 1,3-diphenyldisiloxane (DPDS) has opened up the possibility of additive-free phosphine oxide reductions in catalytic systems. Herein we disclose the use of this new reducing agent as an enabler of phosphorus redox recycling in Wittig, Staudinger, and alcohol substitution reactions. DPDS was successfully utilized in ambient-temperature additive-free redox recycling variants of the Wittig olefination, Appel halogenation, and Staudinger reduction. Triphenylphosphine-promoted catalytic recycling reactions were also facilitated by DPDS. Additive-free triphenylphosphine-promoted catalytic Staudinger reductions could even be performed at ambient temperature due to the rapid nature of phosphinimine reduction, for which we characterized kinetic and thermodynamic parameters. These results demonstrate the utility of DPDS as an excellent reducing agent for the development of phosphorus redox recycling reactions.

Let's Make White Phosphorus Obsolete

Industrial and laboratory methods for incorporating phosphorus atoms into molecules within the framework of Green Chemistry are in their infancy. Current practice requires large inputs of energy, involves toxic intermediates, and generates substantial waste. Furthermore, a negligible fraction of phosphorus-containing waste is recycled which in turn contributes to negative environmental impacts, such as eutrophication. Methods that begin to address some of these drawbacks are reviewed, and some key opportunities to be realized by pursuing organophosphorus chemistry under the principles of Green Chemistry are highlighted. Methods used by nature, or in the chemistry of other elements such as silicon, are discussed as model processes for the future of phosphorus in chemical synthesis.

Cross-Linked Surface Engineering to Improve Iron Porphyrin Catalytic Activity

Quasi-two-dimensional (QTD) structural heterogeneous catalysts have attracted a broad interest in multidisciplinary research due to their unique structure, preeminent surface properties and outstanding catalytic performance. Herein, a HZIF@TCPP-Fe/Fe heterogeneous catalyst based on cross-linked surface engineering is constructed by supporting QTD TCPP-Fe/Fe ultra-thin metallized film (≈2 nm) on hollow skeleton of zeolite imidazolate frameworks. The designed QTD structure exhibits high efficiency for the catalytic oxidative dehydrogenation of aromatic hydrazides reactions which is the key technology in various industrial processes. Taking advantage of QTD structure with excellent accessibility, the metallized film with irregular defects not only enhances electron transfer during the reaction but also exposes more surface-active sites. Furthermore, the prepared HZIF@TCPP-Fe/Fe heterogeneous catalyst can be recycled and reused, which is of great significance in the field of green chemistry.

An Improved PIII/PV═O-Catalyzed Reductive C-N Coupling of Nitroaromatics and Boronic Acids by Mechanistic Differentiation of Rate- and Product-Determining Steps

Experimental, spectroscopic, and computational studies are reported that provide an evidence-based mechanistic description of an intermolecular reductive C–N coupling of nitroarenes and arylboronic acids catalyzed by a redox-active main-group catalyst (1,2,2,3,4,4-hexamethylphosphetane P-oxide, i.e., 1·[O]). The central observations include the following: (1) catalytic reduction of 1·[O] to P^III phosphetane 1 is kinetically fast under conditions of catalysis; (2) phosphetane 1 represents the catalytic resting state as observed by ³¹P NMR spectroscopy; (3) there are no long-lived nitroarene partial-reduction intermediates observable by ¹⁵N NMR spectroscopy; (4) the reaction is sensitive to solvent dielectric, performing best in moderately polar solvents (viz. cyclopentylmethyl ether); and (5) the reaction is largely insensitive with respect to common hydrosilane reductants. On the basis of the foregoing studies, new modified catalytic conditions are described that expand the reaction scope and provide for mild temperatures (T ≥ 60 °C), low catalyst loadings (≥2 mol%), and innocuous terminal reductants (polymethylhydrosiloxane). DFT calculations define a two-stage deoxygenation sequence for the reductive C–N coupling. The initial deoxygenation involves a rate-determining step that consists of a (3+1) cheletropic addition between the nitroarene substrate and phosphetane 1; energy decomposition techniques highlight the biphilic character of the phosphetane in this step. Although kinetically invisible, the second deoxygenation stage is implicated as the critical C–N product-forming event, in which a postulated oxazaphosphirane intermediate is diverted from arylnitrene dissociation toward heterolytic ring opening with the arylboronic acid; the resulting dipolar intermediate evolves by antiperiplanar 1,2-migration of the organoboron residue to nitrogen, resulting in displacement of 1·[O] and formation of the target C–N coupling product upon in situ hydrolysis. The method thus described constitutes a mechanistically well-defined and operationally robust main-group complement to the current workhorse transition-metal-based methods for catalytic intermolecular C–N coupling.

A practical route to azo compounds by metal-free aerobic oxidation of arylhydrazides using an NOx system

Metal-free aerobic oxidation of aryl hydrazides catalyzed by NO_x was developed for the practical and environment friendly synthesis of azo compounds.

Convergent Synthesis of Polysubstituted Furans via Catalytic Phosphine Mediated Multicomponent Reactions

Tri- or tetrasubstituted furans have been prepared from terminal activated olefins and acyl chlorides or anhydrides by a multicomponental convergent synthesis mode. Instead of stoichiometric nBu₃P, only catalytic nBu₃P or nBu₃P=O is needed to furnish the furans in modest to excellent yields with a good functional group tolerance under the aid of reducing agent silane. This synthetic method features a silane-driven catalytic intramolecular Wittig reaction as a key annulation step and represents the first successful application of catalytic Wittig reaction in multicomponent cascade reaction.

Redox-neutral organocatalytic Mitsunobu reactions

Nucleophilic substitution reactions of alcohols are among the most fundamental and strategically important transformations in organic chemistry. For over half a century, these reactions have been achieved by using stoichiometric, and often hazardous, reagents to activate the otherwise unreactive alcohols. Here, we demonstrate that a specially designed phosphine oxide promotes nucleophilic substitution reactions of primary and secondary alcohols in a redox-neutral catalysis manifold that produces water as the sole by-product. The scope of the catalytic coupling process encompasses a range of acidic pronucleophiles that allow stereospecific construction of carbon-oxygen and carbon-nitrogen bonds.

Driving Recursive Dehydration by PIII/PV Catalysis: Annulation of Amines and Carboxylic Acids by Sequential C-N and C-C Bond Formation

A method for the annulation of amines and carboxylic acids to form pharmaceutically relevant azaheterocycles via organophosphorus P^III/P^V redox catalysis is reported. The method employs a phosphetane catalyst together with a mild bromenium oxidant and terminal hydrosilane reductant to drive successive C–N and C–C bond-forming dehydration events via the serial action of a catalytic bromophosphonium intermediate. These results demonstrate the capacity of P^III/P^V redox catalysis to enable iterative redox-neutral transformations in complement to the common reductive driving force of the P^III/P^V couple.

Esterification by Redox Dehydration Using Diselenides as Catalytic Organooxidants

Ortho-functionalized aryl diselenides are catalytic (5.0 mol %) oxidants for the construction of esters from carboxylic acids and alcohols in the presence of stoichiometric triethyl phosphite and dioxygen in air as the terminal redox reagents (redox dehydration conditions). The reaction proceeds through the intermediacy of the anhydride and requires the presence of 10% DMAP to drive the esterification.

The catalytic Mitsunobu reaction: a critical analysis of the current state-of-the-art

The Mitsunobu reaction is widely regarded as the pre-eminent method for performing nucleophilic substitutions of alcohols with inversion of configuration. However, its applicability to large-scale synthesis is undermined by the fact that alcohol activation occurs at the expense of two stoichiometric reagents - a phosphine and an azodicarboxylate. The ideal Mitsunobu reaction would be sub-stoichiometric in the phosphine and azodicarboxylate species and employ innocuous terminal oxidants and reductants to achieve recycling. This Review article provides a summary and analysis of recent advances towards the development of such catalytic Mitsunobu reactions.

Phosphine Organocatalysis

The hallmark of nucleophilic phosphine catalysis is the initial nucleophilic addition of a phosphine to an electrophilic starting material, producing a reactive zwitterionic intermediate, generally under mild conditions. In this Review, we classify nucleophilic phosphine catalysis reactions in terms of their electrophilic components. In the majority of cases, these electrophiles possess carbon-carbon multiple bonds: alkenes (section 2), allenes (section 3), alkynes (section 4), and Morita-Baylis-Hillman (MBH) alcohol derivatives (MBHADs; section 5). Within each of these sections, the reactions are compiled based on the nature of the second starting material-nucleophiles, dinucleophiles, electrophiles, and electrophile-nucleophiles. Nucleophilic phosphine catalysis reactions that occur via the initial addition to starting materials that do not possess carbon-carbon multiple bonds are collated in section 6. Although not catalytic in the phosphine, the formation of ylides through the nucleophilic addition of phosphines to carbon-carbon multiple bond-containing compounds is intimately related to the catalysis and is discussed in section 7. Finally, section 8 compiles miscellaneous topics, including annulations of the Hüisgen zwitterion, phosphine-mediated reductions, iminophosphorane organocatalysis, and catalytic variants of classical phosphine oxide-generating reactions.

A General One-Pot Synthesis of 2H-Indazoles Using an Organophosphorus-Silane System

A simple and direct approach for the regioselective construction of the privileged 2H-indazole scaffold is described. The developed one-pot strategy involves phospholene-mediated N-N bond formation to access 2H-indazoles. The amount of organophosphorus reagent was minimized by recycling the phospholene oxide with organosilane reductants. Starting from functionalized 2-nitrobenzaldehydes and primary amines, a mild reductive cyclization, involving the use of commercially available phospholene oxide and silanes, delivered a wide variety of substituted 2H-indazoles in good to excellent yields.

Nucleophilic Substitutions of Alcohols in High Levels of Catalytic Efficiency

A practical method for the nucleophilic substitution (S _N) of alcohols furnishing alkyl chlorides, bromides, and iodides under stereochemical inversion in high catalytic efficacy is introduced. The fusion of diethylcyclopropenone as a simple Lewis base organocatalyst and benzoyl chloride as a reagent allows notable turnover numbers up to 100. Moreover, the use of plain acetyl chloride as a stoichiometric promotor in an invertive S _N-type transformation is demonstrated for the first time. The operationally straightforward protocol exhibits high levels of stereoselectivity and scalability and tolerates a variety of functional groups.

A General Catalytic Method for Highly Cost- and Atom-Efficient Nucleophilic Substitutions

A general formamide-catalyzed protocol for the efficient transformation of alcohols into alkyl chlorides, which is promoted by substoichiometric amounts (down to 34 mol %) of inexpensive trichlorotriazine (TCT), is introduced. This is the first example of a TCT-mediated dihydroxychlorination of an OH-containing substrate (e.g., alcohols and carboxylic acids) in which all three chlorine atoms of TCT are transferred to the starting material. The consequently enhanced atom economy facilitates a significantly improved waste balance (E-factors down to 4), cost efficiency, and scalability (>50 g). Furthermore, the current procedure is distinguished by high levels of functional-group compatibility and stereoselectivity, as only weakly acidic cyanuric acid is released as exclusive byproduct. Finally, a one-pot protocol for the preparation of amines, azides, ethers, and sulfides enabled the synthesis of the drug rivastigmine with twofold S_N 2 inversion, which demonstrates the high practical value of the presented method.

Systematic Evaluation of 2-Arylazocarboxylates and 2-Arylazocarboxamides as Mitsunobu Reagents

2-Arylazocarboxylate and 2-arylazocarboxamide derivatives can serve as replacements of typical Mitsunobu reagents such as diethyl azodicarboxylate. A systematic investigation of the reactivity and physical properties of those azo compounds has revealed that they have an excellent ability as Mitsunobu reagents. These reagents show similar or superior reactivity as compared to the known azo reagents and are applicable to the broad scope of substrates. p K_a and steric effects of substrates have been investigated, and the limitation of the Mitsunobu reaction can be overcome by choosing suitable reagents from the library of 2-arylazocarboxylate and 2-aryl azocarboxamide derivatives. Convenient recovery of azo reagents is available by one-pot iron-catalyzed aerobic oxidation, for example. SC-DSC analysis of representative 2-arylazocarboxylate and 2-arylazocarboxamide derivatives has shown high thermal stability, indicating that these azo reagents possess lower chemical hazard compared with typical azo reagents.

The Goldilocks Principle in Phase Labeling. Minimalist and Orthogonal Phase Tagging for Chromatography-Free Mitsunobu Reaction

An inexpensive and chromatography-free Mitsunobu methodology has been developed using low molecular weight and orthogonally phase-tagged reagents, a tert-butyl-tagged highly apolar phosphine, and a water-soluble DIAD analogue. The byproduct of the Mitsunobu reactions can be removed by sequential liquid-liquid extractions using traditional solvents such as hexanes, MeOH, water, and EtOAc. Owing to the orthogonal phase labeling, the spent reagents can be regenerated. This new variant of the Mitsunobu reaction promises to provide an alternative and complementary solution for the well-known separation problem of the Mitsunobu reaction without having to resort to expensive, large molecular weight reagents and chromatography.

Bridged [2.2.1] bicyclic phosphine oxide facilitates catalytic γ-umpolung addition-Wittig olefination

A novel bridged [2.2.1] bicyclic phosphine oxide, devised to circumvent the waste generation and burdens of purification that are typical of reactions driven by the generation of phosphine oxides, has been prepared in three steps from commercially available cyclopent-3-ene-1-carboxylic acid. The performance of this novel phosphine oxide was superior to those of current best-in-class counterparts, as verified experimentally through kinetic analysis of its silane-mediated reduction. It has been applied successfully in halide-/base-free catalytic γ-umpolung addition-Wittig olefinations of allenoates and 2-amidobenzaldehydes to produce 1,2-dihydroquinolines with good efficiency. One of the 1,2-dihydroquinoline products was converted to known antitubercular furanoquinolines.

Aerobic, Diselenide-Catalyzed Redox Dehydration: Amides and Peptides

At 2.5 mol % loadings using reaction temperatures between 30-55 °C, ortho-functionalized diaryl diselenides are highly effective organocatalytic oxidants for aerobic redox dehydrative amidic and peptidic bond formation using triethyl phosphite as a simple terminal reductant. This simple-to-perform organocatalytic reaction relies on the ability of selenols to react directly with dioxygen in air without recourse to metal catalysts. It represents an important step toward the development of a general, economical, and benign catalytic redox dehydration protocol.

Efficient synthesis of esters through oxone-catalyzed dehydrogenation of carboxylic acids and alcohols

An environmentally friendly oxone (20 mol%) catalyzed esterification of carboxylic acids with alcohols has been developed, providing an attractive alternative to the construction of valuable carbonyl esters.

Photocatalytic esterification under Mitsunobu reaction conditions mediated by flavin and visible light

Excited flavin facilitates stereoselective coupling of alcohols and acids to esters in the presence of triphenylphosphine and catalytic amount of dialkyl hydrazinedicarboxylate.