Cobalt-Catalyzed C-F Bond Borylation of Aryl Fluorides

Cr-catalyzed borylation of C(aryl)-F bonds using a terpyridine ligand

The defluoroborylation of fluoroarenes by chromium-catalyzed cleavage of unactivated C-F bonds is described. The reaction uses HBpin as the boron source, low-cost and commercially available chromium salt as the precatalyst, and terpyridine as a crucial ligand, providing a protocol with atom-efficient benefits and a wide range of applicable substrates for the functionalization of aryl C-F bonds. Preliminary mechanistic studies indicate that an unprecedented Cr-catalyzed magnesiation of the unactivated C-F bond occurred. The generated arylmagnesium intermediates then participated in the subsequent borylation reaction. The application of the strategy in the preparation of valuable derivatives is demonstrated by the late-stage functionalization of boronate ester groups.

Radiosynthesis and whole-body distribution in mice of a 18 F-labeled azepino[4,3-b]indole-1-one derivative with multimodal activity for the treatment of Alzheimer's disease

Recently, the azepino[4,3-b]indole-1-one derivative 1 showed in vitro nanomolar inhibition against butyrylcholinesterase (BChE), the ChE isoform that plays a role in the progression and pathophysiology of Alzheimer's disease (AD), and protects against N-methyl- d-aspartate-induced neuronal toxicity. Three 9-R-substituted (R = F, Br, OMe) congeners were investigated. The 9-F derivative (2a) was found more potent as BChE inhibitors (half-maximal inhibitory concentration value = 21 nM) than 2b (9-Br) and 2c (9-OMe), achieving a residence time (38 s), assessed by surface plasmon resonance, threefold higher than that of 1. To progress in featuring the in vivo pharmacological characterization of 2a, herein the 18 F-labeled congener 2a was synthesized, by applying the aromatic 18 F-fluorination method, and its whole-body distribution in healthy mice, including brain penetration, was evaluated through positron emission tomography imaging. [18 F]2a exhibited a rapid and high brain uptake (3.35 ± 0.26% ID g-1 at 0.95 ± 0.15 min after injection), followed by a rapid clearance (t1/2  = 6.50 ± 0.93 min), showing good blood-brain barrier crossing. After a transient liver accumulation of [18 F]2a, the intestinal and urinary excretion was quantified. Finally, ex vivo pharmacological experiments in mice showed that the unlabeled 2a affects the transmitters' neurochemistry, which might be favorable to reverse cognition impairment in mild-to-moderate AD-related dementias.

Advances in Catalytic C–F Bond Activation and Transformation of Aromatic Fluorides

The activation and transformation of C–F bonds in fluoro-aromatics is a highly desirable process in organic chemistry. It provides synthetic methods/protocols for the generation of organic compounds possessing single or multiple C–F bonds, and effective catalytic systems for further study of the activation mode of inert chemical bonds. Due to the high polarity of the C–F bond and it having the highest bond energy in organics, C–F activation often faces considerable academic challenges. In this mini-review, the important research achievements in the activation and transformation of aromatic C–F bond, catalyzed by transition metal and metal-free systems, are presented.

Nickel-catalyzed enantioselective α-heteroarylation of ketones via C-F bond activation to construct all-carbon quaternary stereocenters

Nickel-catalyzed asymmetric α-heteroarylation of ketones with fluorinated heteroarenes is reported via C-F bond activation. A series of ketones and 2-fluoropyridine derivatives with different functional groups proceed well to provide the corresponding products containing all-carbon quaternary stereocenters in good yields (up to 99% yield) and high ee values (up to 99% ee). In addition, drug molecule donepezil could also be compatible under the reaction conditions to afford late-stage diversification of pharmaceuticals.

Cobalt-Catalyzed Formation of Grignard Reagents via C-O or C-S Bond Activation

C(aryl)-OMe bond functionalization catalyzed by cobalt(II) chloride in combination with a nacnac-type ligand and magnesium as a reductant is reported. Borylation and benzoylation of aryl methoxides are demonstrated, and C(aryl)-SMe bond borylation can be achieved under similar conditions. This is the first example of achieving these transformations using cobalt catalysis. Mechanistic studies suggest that a Grignard reagent is generated as an intermediate in a rare example of a magnesiation via a C-O bond activation reaction. Indeed, an organomagnesium species could be directly observed by electrospray ionization mass spectroscopic analysis. Kinetic experiments indicate that a heterogeneous cobalt catalyst performs the C-O bond activation.

Grignard reagent formation via C-F bond activation: a centenary perspective

Examples of Grignard reagents obtained by C-F bond activation with magnesium have kept appearing in the literature over the last century. Due to the high bond dissociation energy of the C-F bond, a lot of effort has been invested in the preparation of highly active forms of magnesium for this purpose. Originally, magnesium activation was achieved by the application of additives, notably iodine. Later work focused on the generation of highly active magnesium powder by reduction of magnesium salts with alkali metals ("Rieke magnesium"). Modern approaches to the problem involve the application of Mg(I)-Mg(I) dimers and C-F bond activation performed by a transition metal catalyst followed by transmetallation with a magnesium salt. The purpose of this article is to provide an overview of fluoro-Grignard reagent preparation approaches reported to date.

Radiosynthesis and characterization of [18F]BS224: a next-generation TSPO PET ligand insensitive to the rs6971 polymorphism

PURPOSE

Translocator protein 18-kDa (TSPO) positron emission tomography (PET) is a valuable tool to detect neuroinflammed areas in a broad spectrum of neurodegenerative diseases. However, the clinical application of second-generation TSPO ligands as biomarkers is limited because of the presence of human rs6971 polymorphism that affects their binding. Here, we describe the ability of a new TSPO ligand, [18F]BS224, to identify abnormal TSPO expression in neuroinflammation independent of the rs6971 polymorphism.

METHODS

An in vitro competitive inhibition assay of BS224 was conducted with [3H]PK 11195 using membrane proteins isolated from 293FT cells expressing TSPO-wild type (WT) or TSPO-mutant A147T (Mut), corresponding to a high-affinity binder (HAB) and low-affinity binder (LAB), respectively. Molecular docking was performed to investigate the interaction of BS224 with the binding sites of rat TSPO-WT and TSPO-Mut. We synthesized a new 18F-labeled imidazopyridine acetamide ([18F]BS224) using boronic acid pinacol ester 6 or iodotoluene tosylate precursor 7, respectively, via aromatic 18F-fluorination. Dynamic PET scanning was performed up to 90 min after the injection of [18F]BS224 to healthy mice, and PET imaging data were obtained to estimate its absorbed doses in organs. To evaluate in vivo TSPO-specific uptake of [18F]BS224, lipopolysaccharide (LPS)-induced inflammatory and ischemic stroke rat models were used.

RESULTS

BS224 exhibited a high affinity (Ki = 0.51 nM) and selectivity for TSPO. The ratio of IC50 values of BS224 for LAB to that for HAB indicated that the TSPO binding affinity of BS224 has low binding sensitivity to the rs6971 polymorphism and it was comparable to that of PK 11195, which is not sensitive to the polymorphism. Docking simulations showed that the binding mode of BS224 is not affected by the A147T mutation and consequently supported the observed in vitro selectivity of [18F]BS224 regardless of polymorphisms. With optimal radiochemical yield (39 ± 6.8%, decay-corrected) and purity (> 99%), [18F]BS224 provided a clear visible image of the inflammatory lesion with a high signal-to-background ratio in both animal models (BPND = 1.43 ± 0.17 and 1.57 ± 0.37 in the LPS-induced inflammatory and ischemic stroke rat models, respectively) without skull uptake.

CONCLUSION

Our results suggest that [18F]BS224 may be a promising TSPO ligand to gauge neuroinflammatory disease-related areas in a broad range of patients irrespective of the common rs6971 polymorphism.

Advances in silylation and borylation of fluoroarenes and gem-difluoroalkenes via C-F bond cleavage

Organoboron and organosilane compounds are widely used in organic synthesis and pharmaceuticals. In addition, the C-F bond functionalization is a useful tool for the construction of carbon-carbon and carbon-heteroatom bonds. In particular, the late-stage functionalization of bioactive molecules through defluoroborylation and defluorosilylation reactions will provide good opportunities for the development and diversification of new medicinal compounds. Thus, this feature article summarized the methods for the defluorosilylation and defluoroborylation of unreactive monofluoroarenes and gem-difluoroalkenes from 2000 to 2021, which might create some new ideas and will be helpful for further research in this field. These defluoroborylation and defluorosilylation strategies can be applied to synthesize silylated arenes, borylated arenes, silylated fluoroalkenes, and borylated fluoroalkenes, thus providing impressive advantages over traditional methods for the synthesis of organoboron and organosilane compounds in terms of divergent structures.

First-Row d-Block Element-Catalyzed Carbon-Boron Bond Formation and Related Processes

Organoboron reagents represent a unique class of compounds because of their utility in modern synthetic organic chemistry, often affording unprecedented reactivity. The transformation of the carbon-boron bond into a carbon-X (X = C, N, and O) bond in a stereocontrolled fashion has become invaluable in medicinal chemistry, agrochemistry, and natural products chemistry as well as materials science. Over the past decade, first-row d-block transition metals have become increasingly widely used as catalysts for the formation of a carbon-boron bond, a transformation traditionally catalyzed by expensive precious metals. This recent focus on alternative transition metals has enabled growth in fundamental methods in organoboron chemistry. This review surveys the current state-of-the-art in the use of first-row d-block element-based catalysts for the formation of carbon-boron bonds.

Development of radioiodinated pyrimidinopyridone derivatives as targeted imaging probes of activated p38α for single photon emission computed tomography

OBJECTIVE

p38α, a member of the mitogen-activated protein kinase superfamily, is ubiquitously expressed in a variety of mammalian cells. Activated p38α induces inflammatory responses to external stimuli, suggesting that non-invasive detection of activated p38α would be valuable for diagnosing inflammatory diseases. For this purpose, we designed radiolabeled compounds [¹²³I]2-IR and [¹²³I]4-IR based on a potent p38α selective inhibitor R1487 for use with single photon emission computed tomography (SPECT). In this study, we used ¹²⁵I instead of ¹²³I due to its more usable radiochemical properties, synthesized [¹²⁵I]2-IR and [¹²⁵I]4-IR, and evaluated their effectiveness as activated p38α imaging probes.

METHODS

[¹²³I]2-IR and [¹²³I]4-IR were designed by introduction of a ¹²³I atom at the 2- or 4-ositions of the phenoxy ring, preserving the pyrimidinopyridone structure of R1487. We synthesized 2-IR and 4-IR via a 7-step process. The inhibitory potencies of 2-IR, 4-IR, and p38α inhibitors were measured using an ADP-Glo™ kinase assay system. Radioiodination of 2-IR and 4-IR was performed via an organotin-radioiodine exchange reaction using the corresponding tributyltin precursors. Biodistributions were evaluated by determining radioactivity in tissues of interest after intravenous administration of [¹²⁵I]2-IR and [¹²⁵I]4-IR in normal ddY mice and turpentine oil-induced inflammation model mice. In vivo inhibition study was also performed in inflammation model mice after intravenous administration of [¹²⁵I]4-IR with pretreatment of p38α inhibitors.

RESULTS

We synthesized 2-IR and 4-IR at total yields of 17.5% and 19.2%, respectively. 4-IR had higher p38α inhibitory potency than 2-IR; both compounds were significantly less potent than R1487. [¹²⁵I]2-IR and [¹²⁵I]4-IR were successfully obtained from tributyltin precursors with high radiochemical yield (> 65%), purity (> 97%), and molar activity (~ 81 GBq/µmol). [¹²⁵I]4-IR showed high radioactivity accumulation in the inflamed tissue (7.0 ± 1.2%D/g), rapid delivery throughout the body, and rapid blood clearance, resulting in a high inflammation-to-blood ratio (6.2 ± 0.4) and a high inflammation-to-muscle ratio (5.2 ± 1.3) at 30 min, while [¹²⁵I]2-IR showed low radioactivity accumulation in inflamed tissue over the experimental period. Further, radioactivity accumulation in inflamed tissue after [¹²⁵I]4-IR administration was significantly decreased by pretreatment with selective inhibitors.

CONCLUSIONS

[¹²³I]4-IR would be a promising imaging agent for detection of activated p38α.

C–F bond activation of perfluorinated arenes using NHC-stabilized cobalt half-sandwich complexes

A study on the reactivity of cobalt half-sandwich complexes [Cp(*)Co(NHC)(olefin)] with perfluoroarenes demonstrates that C–F activation occurs along a one-electron oxidative addition pathway.

Iron-catalyzed C–F bond silylation and borylation of fluoroarenes

Iron-catalyzed functionalization of inert bonds has scarcely been documented.

Cobalt-Catalyzed Defluorosilylation of Aryl Fluorides via Grignard Reagent Formation

Transition-metal-catalyzed transformations of the carbon-fluorine bond not only tackle an interesting problem of challenging bond activation but also offer new synthetic strategies where the relatively inert C-F bond is converted to versatile functional groups. Herein we report a practical cobalt-catalyzed silylation of aryl fluorides that uses a cheap electrophilic silicon source with magnesium. This method is compatible with various silicon sources and can be operated under aerobic conditions. Mechanistic studies support the in situ formation of a Grignard reagent, which is captured by the electrophilic silicon source.

Palladium-catalysed C-F alumination of fluorobenzenes: mechanistic diversity and origin of selectivity

A palladium pre-catalyst, [Pd(PCy₃)₂] is reported for the efficient and selective C–F alumination of fluorobenzenes with the aluminium(i) reagent [{(ArNCMe)₂CH}Al] (1, Ar = 2,6-di-iso-propylphenyl). The catalytic protocol results in the transformation of sp² C–F bonds to sp² C–Al bonds and provides a route to reactive organoaluminium complexes (2a–h) from fluorocarbons. The catalyst is highly active. Reactions proceed within 5 minutes at 25 °C (and at appreciable rates at even −50 °C) and the scope includes low-fluorine-content substrates such as fluorobenzene, difluorobenzenes and trifluorobenzenes. The reaction proceeds with complete chemoselectivity (C–F vs. C–H) and high regioselectivities (>90% for C–F bonds adjacent to the most acidic C–H sites). The heterometallic complex [Pd(PCy₃)(1)₂] was shown to be catalytically competent. Catalytic C–F alumination proceeds with a KIE of 1.1–1.3. DFT calculations have been used to model potential mechanisms for C–F bond activation. These calculations suggest that two competing mechanisms may be in operation. Pathway 1 involves a ligand-assisted oxidative addition to [Pd(1)₂] and leads directly to the product. Pathway 2 involves a stepwise C–H → C–F functionalisation mechanism in which the C–H bond is broken and reformed along the reaction coordinate, guiding the catalyst to an adjacent C–F site. This second mechanism explains the experimentally observed regioselectivity. Experimental support for this C–H activation playing a key role in C–F alumination was obtained by employing [{(MesNCMe)₂CH}AlH₂] (3, Mes = 2,4,6-tri-methylphenyl) as a reagent in place of 1. In this instance, the kinetic C–H alumination intermediate could be isolated. Under catalytic conditions this intermediate converts to the thermodynamic C–F alumination product.

A palladium pre-catalyst, [Pd(PCy₃)₂] is reported for the efficient and selective C–F alumination of fluorobenzenes with the aluminium(i) reagent [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl).

Methodologies and Strategies for Selective Borylation of C-Het and C-C Bonds

Organoborons have emerged as versatile building blocks in organic synthesis to achieve molecular diversity and as carboxylic acid bioisosteres with broad applicability in drug discovery. Traditionally, these compounds are prepared by the substitution of Grignard/lithium reagents with electrophilic boron species and Brown hydroboration. Recent developments have provided new routes for the efficient preparation of organoborons by applying reactions using chemical feedstocks with leaving groups. As compared to the previous methods that used organic halides (I, Br, and Cl), the direct borylation of less reactive C-Het and C-C bonds has become highly important to get efficiency and functional-group compatibility. This Review aims to provide a comprehensive overview of this topic, including (1) C-F bond borylation, (2) C-O bond borylation, (3) C-S bond borylation, (4) C-N bond borylation, and (5) C-C bond borylation. Considerable attention is given to the strategies and mechanisms involved. We expect that this Review will inspire chemists to discover more efficient transformations to expand this field.

Cobalt fluorides: preparation, reactivity and applications in catalytic fluorination and C-F functionalization

Recent advances in the investigation of cobalt fluorides in organofluorine chemistry are highlighted. The preparation and reactivity of inorganic and organometallic cobalt fluorides are discussed. The in-depth understanding of the structures and reactivity of cobalt fluorides allows chemists to develop diverse innovative catalytic fluorination and C-F functionalization.

Activation of C–F, Si–F, and S–F Bonds by N-Heterocyclic Carbenes and Their Isoelectronic Analogues

Reactions involving C–F, Si–F, and S–F bond cleavage with N-heterocyclic carbenes and isoelectronic species are reviewed. Most examples involve activation of aromatic C–F bond via an SNAr pathway and nucleophilic substitution of fluorine in electron-deficient olefins. The mechanism of the C–F bond activation depends on the reaction partners and the reaction can proceed via addition–elimination, oxidative addition (concerted or stepwise) or metathesis. The adducts formed upon substitution find applications in organic synthesis, as ligands and as stable radical precursors, but in most cases, their full potential remains unexplored.

1 Introduction

1.1 The C–F Bond

1.2 C–F Bond Activation: A Short Summary

1.3 C–F Bond Activation: A Special Case of SNAr

1.4 N-Heterocyclic Carbenes (NHCs)

1.5 The Purpose of this Article

2 C–F bond Activation in Acyl Fluorides

3 Activation of Vinylic C–F Bonds

4 Activation of Aromatic C–F Bonds

5 X–F Bond Activation (X = S or Si)

6 C–F Bond Activation by Main Group Compounds Isoelectronic with NHCs

7 Conclusions and Outlook

Visible-Light-Induced Selective Defluoroborylation of Polyfluoroarenes, gem-Difluoroalkenes, and Trifluoromethylalkenes

Fluorinated organoboranes serve as versatile synthetic precursors for the preparation of value-added fluorinated organic compounds. Recent progress has been mainly focused on the transition-metal catalyzed defluoroborylation. Herein, we report a photocatalytic defluoroborylation platform through direct B-H activation of N-heterocyclic carbene boranes, through the synergistic merger of a photoredox catalyst and a hydrogen atom transfer catalyst. This atom-economic and operationally simple protocol has enabled defluoroborylation of an extremely broad scope of multifluorinated substrates including polyfluoroarenes, gem-difluoroalkenes, and trifluoromethylalkenes in a highly selective fashion. Intriguingly, the defluoroborylation protocol can be transition-metal free, and the regioselectivity obtained is complementary to the reported transition-metal-catalysis in many cases.

Indolylboronic Acids: Preparation and Applications

Indole derivatives are associated with a variety of both biological activities and applications in the field of material chemistry. A number of different strategies for synthesizing substituted indoles by means of the reactions of indolylboronic acids with electrophilic compounds are considered the methods of choice for modifying indoles because indolylboronic acids are easily available, stable, non-toxic and new reactions using indolylboronic acids have been described in the literature. Thus, the aim of this review is to summarize the methods available for the preparation of indolylboronic acids as well as their chemical transformations. The review covers the period 2010-2019.