Cu/N,N′-Dibenzyloxalamide-Catalyzed N-Arylation of Heteroanilines

Cu-Catalyzed Amination of Base-Sensitive Aryl Bromides and the Chemoselective N- and O-Arylation of Amino Alcohols

We report a general and functional-group-tolerant method for the Cu-catalyzed amination of base-sensitive aryl bromides including substrates possessing acidic functional groups and small five-membered heteroarenes. The results presented herein substantially expand the scope of Cu-catalyzed C-N coupling reactions. The combination of L8, an anionic N1,N2-diarylbenzene-1,2-diamine ligand, along with the mild base NaOTMS leads to the formation of a stable yet reactive catalyst that resists deactivation from coordination to heterocycles or charged intermediates. This system enables the use of low catalyst and ligand loadings. Exploiting the differences in nucleophile deprotonation in C-O and C-N coupling reactions catalyzed by Cu·L8 we developed a method to chemoselectively N- and O-arylate a variety of amino alcohol substrates. Employing NaOt-Bu as the base resulted exclusively in C-O coupling when the amino alcohols featured primary alcohols and more hindered amines or aniline groups. Utilizing NaOTMS enabled the ability to override the steric-based selectivity of these reactions completely and exclusively promoted C-N coupling regardless of the structure of the amino alcohol. The ability to invert the observed chemoselectivity is distinct from previously described methods that require protecting group manipulations or rely entirely on steric effects to control reactivity. These results substantially improve the scope of Cu-catalyzed C-N coupling reactions using N1,N2-diarylbenzene-1,2-diamine ligands and introduce a new chemoselective method to arylate amino alcohols.

Copper-Catalyzed α-Arylation of Nitroalkanes with (Hetero)aryl Bromides/Iodides

α-Aryl substituted nitroalkanes are valuable synthetic building blocks that can be easily converted into α-aryl substituted aldehydes, ketones, carboxylic acids, as well as amines. Herein, an efficient Cu/oxalamide-catalyzed coupling between nitroalkanes and (hetero)aryl halides (Br, I) was developed to direct access highly diverse α-aryl substituted nitroalkanes. Compared with the current state of art, this protocol is more environmentally friendly and practical for synthetic chemists. This approach is characterized by a broad substrate scope on both nitroalkane part (primary nitroalkanes and nitromethane) and sp2 halide part ((hetero)aryl bromides/iodides and alkenyl bromides/iodides). The excellent functional group tolerance was observed, which would enable real world synthetic applications. More importantly, TON of current transformation reached to 3640, when some aryl iodides were used as coupling partners. This represents currently the highest catalyst turnover for transition-metal catalyzed α-arylation of nitroalkanes. Furthermore, the successful application in late-stage modification of complex molecules and synthesis of a known retinoid X receptor (RXR) antagonist exemplified its synthetic potential.

Predicting success in Cu-catalyzed C-N coupling reactions using data science

Data science is assuming a pivotal role in guiding reaction optimization and streamlining experimental workloads in the evolving landscape of synthetic chemistry. A discipline-wide goal is the development of workflows that integrate computational chemistry and data science tools with high-throughput experimentation as it provides experimentalists the ability to maximize success in expensive synthetic campaigns. Here, we report an end-to-end data-driven process to effectively predict how structural features of coupling partners and ligands affect Cu-catalyzed C-N coupling reactions. The established workflow underscores the limitations posed by substrates and ligands while also providing a systematic ligand prediction tool that uses probability to assess when a ligand will be successful. This platform is strategically designed to confront the intrinsic unpredictability frequently encountered in synthetic reaction deployment.

Room-Temperature CuI-Catalyzed N-Arylation of Cyclopropylamine

A general and efficient CuI/N-carbazolyl-1H-pyrrole-2-carbohydrazide catalyst system was developed for the N-arylation of cyclopropylamine using aryl bromides at room temperature. Herein, 5 mol % CuI and 5 mol % of the ligand were used to synthesize N-aryl cyclopropylamines in moderate to excellent yields. This protocol was scaled up to produce the desired product at gram levels and has been generalized for C-N coupling between aryl bromides and amines at room temperature.

Facile access to 5H-thiazolo[2',3':2,3]imidazo[4,5-b]indole derivatives by two-fold Cu-catalysed C-N coupling reactions

In four simple steps, a series of 5H-thiazolo[2',3':2,3]imidazo[4,5-b]indole and 11H-benzo[4',5']thiazolo[2',3':2,3]imidazo[4,5-b]indole derivatives were prepared with high yields. The key step in this procedure was demonstrated to be two-fold Cu-catalysed C-N coupling reactions of 5-bromo-6-(2-bromophenyl)imidazo[2,1-b]thiazole and 3-bromo-2-(2-bromophenyl)benzo[d]imidazo[2,1-b]thiazole with various amines.

Cross-coupling by a noncanonical mechanism involving the addition of aryl halide to Cu(II)

Copper complexes are widely used in the synthesis of fine chemicals and materials to catalyze couplings of heteroatom nucleophiles with aryl halides. We show that cross-couplings catalyzed by some of the most active catalysts occur by a mechanism not previously considered. Copper(II) [Cu(II)] complexes of oxalamide ligands catalyze Ullmann coupling to form the C-O bond in aryl ethers by concerted oxidative addition of an aryl halide to Cu(II) to form a high-valent species that is stabilized by radical character on the oxalamide ligand. This mechanism diverges from those involving Cu(I) and Cu(III) intermediates that have been posited for other Ullmann-type couplings. The stability of the Cu(II) state leads to high turnover numbers, >1000 for the coupling of phenoxide with aryl chloride electrophiles, as well as an ability to run the reactions in air.

Room-Temperature Cu-Catalyzed Amination of Aryl Bromides Enabled by DFT-Guided Ligand Design

Ullmann-type C-N coupling reactions represent an important alternative to well-established Pd-catalyzed approaches due to the differing reactivity and the lower cost of Cu. While the design of anionic Cu ligands, particularly those by Ma, has enabled the coupling of various classes of aryl halides and alkyl amines, most methods require conditions that can limit their utility on complex substrates. Herein, we disclose the development of anionic N1,N2-diarylbenzene-1,2-diamine ligands that promote the Cu-catalyzed amination of aryl bromides under mild conditions. Guided by DFT calculations, these ligands were designed to (1) increase the electron density on Cu, thereby increasing the rate of oxidative addition of aryl bromides, and (2) stabilize the active anionic CuI complex via a π-interaction. Under optimized conditions, structurally diverse aryl and heteroaryl bromides and a broad range of alkyl amine nucleophiles, including pharmaceuticals bearing multiple functional groups, were efficiently coupled at room temperature. Combined computational and experimental studies support a mechanism of C-N bond formation that follows a catalytic cycle akin to the well-explored Pd-catalyzed variants. Modification of the ligand structure to include a naphthyl residue resulted in a lower energy barrier to oxidative addition, providing a 30-fold rate increase relative to what is seen with other ligands. Collectively, these results establish a new class of anionic ligands for Cu-catalyzed C-N couplings, which we anticipate may be extended to other Cu-catalyzed C-heteroatom and C-C bond-forming reactions.

Cu(BF4)2/AC-Catalyzed Synthesis of N-Substituted Anilines, N-Substituted 1,6-Naphthyridin-5(6H)-one, and Isoquinolin-1(2H)-one

Herein, we report practical Cu(BF₄)₂/activated carbon-catalyzed amination of various anilines, isoquinolinone, and naphthyridinone with aryl boronic acids. The ultrasonic and rotary evaporation treatment of the mixture of aq. Cu(BF₄)₂ and activated carbon in methanol afforded a novel Cu(II)-catalyst, which is air-stable and can be effectively applied in the Chan-Lam coupling reaction. The products of N-arylation were isolated in good to excellent yields at low catalytic loading. And Cu(BF₄)₂/AC also showed good reusability.

Oxalamide/Amide Ligands: Enhanced and Copper-Catalyzed C-N Cross-Coupling for Triarylamine Synthesis

Triarylamines are privileged core structures that are found in versatile optoelectronic materials. New methods are constantly being sought for their preparation. Herein, a new protocol for triarylamine synthesis is presented where a wide range of diarylamines couple smoothly with aryl bromides mediated by a copper oxalamide (or amide) catalytic system. Notably, a new non-C₂-symmetric 1-isoquinolinamide-based N,N-/N,O-bidentate ligand was introduced that could tolerate bulky diarylamines. Plenty of known optoelectronic functional molecules could be synthesized in good to excellent yields. The practicality of this C-N cross-coupling was illustrated by the gram-scale synthesis of a patented thermally activated delayed fluorescence emitter for organic light-emitting diodes.

Visible-Light Copper Nanocluster Catalysis for the C-N Coupling of Aryl Chlorides at Room Temperature

Activation of aryl chlorides in cross-coupling reactions is a long-standing challenge in organic synthesis that is of great interest to industry. Ultrasmall (<3 nm), atomically precise nanoclusters (NCs) are considered one of the most promising catalysts due to their high surface area and unsaturated active sites. Herein, we introduce a copper nanocluster-based catalyst, [Cu₆₁(S^tBu)₂₆S₆Cl₆H₁₄] (Cu₆₁NC) that enables C-N bond-forming reactions of aryl chlorides under visible-light irradiation at room temperature. A range of N-heterocyclic nucleophiles and electronically and sterically diverse aryl/hetero chlorides react in this new Cu₆₁NC-catalyzed process to afford the C-N coupling products in good yields. Mechanistic studies indicate that a single-electron-transfer (SET) process between the photoexcited Cu₆₁NC complex and aryl halide enables the C-N-arylation reaction.

Unification of Ullmann and Kharasch coupling: acid promoted CuI catalysed C–N coupling protocols under ligand, base and solvent free conditions

A ligand, base and solvent-free, Cu catalysed and NiCl2 promoted C-N coupling reaction. Exceptional functional group tolerance which requires 2 h for desired transformations. An economical and effective modification of the Ullman coupling protocol.

A simple and efficient copper-catalyzed three-component reaction to synthesize (Z)-1,2-dihydro-2-iminoquinolines

A operationally simple synthesis of (Z)-1,2-dihydro-2-iminoquinolines that proceeds under mild conditions is achieved by copper-catalyzed reaction of 1-(2-aminophenyl)ethan-1-ones, sulfonyl azides and terminal ynones. In particular, the reaction goes through a base-free CuAAC/ring-opening process to obtain the Z-configured products due to hydrogen bonding.

Practical synthesis of immucillins BCX-1777 and BCX-4430

A practical synthesis of the immucillins BCX-1777 and BCX-4430 has been described.

Synthesis of tri(di)fluoroethylanilines via copper-catalyzed coupling reaction of tri(di)fluoroethylamine with (hetero)aromatic bromides

We have realized the first Ullmann type coupling reaction of tri(di)fluoroethylamine with (hetero)aromatic bromides, employing 5-20 mol% Cu₂O and an oxalamide ligand [N-(2,4,6-trimethoxyphenyl)acetamide]. This efficient and practical method has the following features: (i) avoids the use of an expensive catalyst; (ii) does not require anhydrous solvent and strict air extrusion; (iii) uses bench stable and inexpensive (hetero)aromatic bromides; (iv) is suitable for the synthesis of fluoroalkylated hetero-aromatic substrates; (v) is suitable for gram-scale synthesis. This work also shows the "negative fluorine effect" for the alkylamines in the copper catalysed coupling reactions.