Study on the Functionalization and Signaling Efficiency of the Hybridization Chain Reaction Using Traditional and Single Molecular Characterizations

Fluorogenic Aptamer-Based Hybridization Chain Reaction for Signal-Amplified Imaging of Apurinic/Apyrimidinic Endonuclease 1 in Living Cells

A fluorogenic aptamer (FA)-based hybridization chain reaction (HCR) could provide a sensitive and label-free signal amplification method for imaging molecules in living cells. However, existing FA-HCR methods usually face some problems, such as a complicated design and significant background leakage, which greatly limit their application. Herein, we developed an FA-centered HCR (FAC-HCR) method based on a remote toehold-mediated strand displacement reaction. Compared to traditional HCRs mediated by four hairpin probes (HPs) and two HPs, the FAC-HCR displayed significantly decreased background leakage and improved sensitivity. Furthermore, the FAC-HCR was used to test a non-nucleic acid target, apurinic/apyrimidinic endonuclease 1 (APE1), an important BER-involved endonuclease. The fluorescence analysis results confirmed that FAC-HCR can reach a detection limit of 0.1174 U/mL. By using the two HPs for FAC-HCR with polyetherimide-based nanoparticles, the activity of APE1 in living cells can be imaged. In summary, this study could provide a new idea to design an FA-based HCR and improve the performance of HCRs in live cell imaging.

Triplex DNA-based aggregation-induced emission probe: A new platform for hybridization chain reaction-based fluorescence sensing assay

The hybridization chain reaction (HCR), as one of the nucleic acid amplification technologies, is combined with fluorescence signal output with excellent sensitivity, simplicity, and stability. However, current HCR-based fluorescence sensing methods still have some defects such as the blocking effect of the HCR combination with fluorophores and the aggregation-caused quenching (ACQ) phenomenon of traditional fluorophores. Herein, a triplex DNA-based aggregation-induced emission probe (AIE-P) was designed as the fluorescent signal transduction, which is able to provide a new platform for HCR-based sensing assay. The AIE-P was synthesized by attaching the AIE fluorophores to terminus of the oligonucleotide through amido bond, and captured the products of HCR to form triplex DNA. In this case, the AIE fluorophores were located in close proximity to generate fluorescence. This assay provided turn-on fluorescence efficiency with a high signal-to-noise ratio and excellent amplification capability to solve the shortcoming of HCR-based fluorescence sensing methods. It enabled sensitive detection of Vibrio parahaemolyticus in the range of 102-106 CFU mL-1, and with a low limit of detection down to 39 CFU mL-1. In addition, this assay expressed good specificity and practicability. The triplex DNA-based AIE probe forms a universal molecular tool for developing HCR-based fluorescence sensing methods.

Solid-State Nanopore Sensors with Enhanced Sensitivity through Nucleic Acid Amplification

Solid-state nanopores have wide applications in DNA sequencing, energy conversion and storage, seawater desalination, sensors, and reactors due to their high stability, controllable geometry, and a variety of pore-forming materials. Solid-state nanopore sensors can be used for qualitative and quantitative analyses of ions, small molecules, proteins, and nucleic acids. The combination of nucleic acid amplification and solid-state nanopores to achieve trace detection of analytes is gradually attracting attention. This review outlines nucleic acid amplification strategies for enhancing the sensitivity of solid-state nanopore sensors by summarizing the articles published in the past 10 years. The future development prospects and challenges of nucleic acid amplification in solid-state nanopore sensors are discussed. This review helps readers better understand the field of solid-state nanopore sensors. We believe that solid-state nanopore sensors will break through the bottleneck of traditional detection and become a powerful single-molecule detection platform.

Single Molecular Nanopores as a Label-Free Method for Homogeneous Conformation Investigation and Anti-Interference Molecular Analysis

In this paper, we propose a "reciprocal strategy" that, on the one hand, explores the ability of solid-state nanopores in a homogeneous high-fidelity characterization of nucleic acid assembly and, on the other hand, the formed nucleic acid assembly with a large size serves as an amplifier to provide a highly distinguished and anti-interference signal for molecular sensing. Four-hairpin hybridization chain reaction (HCR) with G-rich tail tags is taken as the proof-of-concept demonstration. G-rich tail tags are commonly used to form G-quadruplex signal probes on the side chain of HCR duplex concatemers. When such G-tailed HCR concatemers translocate the nanopore, abnormal, much higher nanopore signals over normal duplexes can be observed. Combined with atomic force microscopy, we reveal the G-rich tail may easily induce the "intermolecular interaction" between HCR concatemers to form "branched assembly structure (BAS)". To the best of our knowledge, this is the first evidence for the formation BAS of the G tailed HCR concatemers in a homogeneous solution. Systematic nanopore measurements further suggest the formation of these BASs is closely related to the types of salt ions, the amount of G, the concentration of substrate hairpins, the reaction time, and so forth. Under optimized conditions, these BASs can be grown to just the right size without being too large to block the pores, while producing a current 14 times that of conventional double-stranded chains. Here, these very abnormal large current blockages have, in turn, been taken as an anti-interference signal indicator for small targets in order to defend the high noises resulting from co-existing big species (e.g., enzymes or other long double-stranded DNA).

Construction of hybridization chain reaction induced optical signal directed change of photonic crystals-DNA hydrogel sensor and its visual determination for aflatoxin B1

Herein, we have introduced hybridization chain reaction (HCR) into the photonic crystals (PhCs) hydrogel, for the first time, realizing HCR for inducing the change of the optical signal of PhCs hydrogel and using this hydrogel as a sensor for determination of the aflatoxin B1 (AFB1). By using specific sequences as the cross-linker, the extension of the cross-linker by HCR drives the swelling of the hydrogel, and the optical property of 2D PhCs array converts this swelling into a change of the Debye diffraction ring. Moreover, by further selecting the aptamer to construct the cross-linker, the hydrogel is also endowed with a unique capability for AFB1, making the hydrogel a novel sensor based on the signal amplification strategy. The results show that the designed hairpin DNAs can effectively trigger the HCR and cause the swelling of hydrogel, and the hydrogel sensor has a good determination performance and high specific recognition for AFB1.

A nanopore counter for highly sensitive evaluation of DNA methylation and its application in in vitro diagnostics

DNA methylation has been considered an essential epigenetic biomarker for diagnosing various diseases, such as cancer. A simple and sensitive way for DNA methylation level detection is necessary. Inspired by the label-free and ultra-high sensitivity of solid-state nanopores to double-stranded DNA (dsDNA), we proposed a nanopore counter for evaluating DNA methylation by integrating a dual-restriction endonuclease digestion strategy coupled with polymerase chain reaction (PCR) amplification. Simultaneous application of BstUI/HhaI endonucleases can ensure the full digestion of the unmethylated target DNA but shows no effect on the methylated ones. Therefore, only the methylated DNA remains intact and can trigger the subsequent PCR reaction, producing a large quantity of fixed-length PCR amplicons, which can be directly detected through glassy nanopores. By simply counting the event rate of the translocation signals, the concentration of methylated DNA can be determined to range from 1 aM to 0.1 nM, with the detection limit as low as 0.61 aM. Moreover, a 0.01% DNA methylation level was successfully distinguished. The strategy of using the nanopore counter for highly sensitive DNA methylation evaluation would be a low-cost but reliable alternative in the analysis of DNA methylation.

Lego-Like Catalytic Hairpin Assembly Enables Controllable DNA-Oligomer Formation and Spatiotemporal Amplification in Single Molecular Signaling

While the solid-state nanopore shows increasing potential during sensitive and label-free single molecular analysis, target concentration and signal amplification method is in urgent need. In this article, a solution via designing a model nucleic acid circuit reaction that can produce "Y" shape-structure three-way DNA oligomers with controllable size and polymerization degree is proposed. Such a so-called lego-like three-way catalytic hairpin assembly (LK-3W-CHA) can provide both concentration amplification (via CHA circuit) and programmable size control (via lego-like building mode) to enhance spatiotemporal resolution in single molecular sensing of solid-state nanopore. Oligomers containing 1-4 DNA three-way junctions (Y monomers, Y1-Y4) are designed in proof-of-concept experiments and applications. When the oligomers are applied to direct translocation measurements, Y2-Y4 can significantly increase the signal resolution and stability than that of Y1. Meanwhile, Y1 to Y4 can be used as the tags on the long DNA carrier to provide very legible secondary signals for specific identification, multiple assays, and information storage. Compared with other possible tags, Y1-Y4 provides higher signal density and amplitude, and quasi-linear "inner reference" for each other, which may provide more systematic, reliable, and controllable experimental results.

Split G-Quadruplexes Enhance Nanopore Signals for Simultaneous Identification of Multiple Nucleic Acids

Assembly of DNA structures based on hybridization like split G-quadruplex (GQ) have great potential for the base-pair specific identification of nucleic acid targets. Herein, we combine multiple split G-quadruplex (GQ) assemblies on designed DNA nanostructures (carrier) with a solid-state nanopore sensing platform. The split GQ probes recognize various nucleic acid sequences in a parallel assay that is based on glass nanopore analysis of molecular structures. Specifically, we split a GQ into two asymmetric parts extended with sequences complementary to the target. The longer G-segment is in solution, and the shorter one is on a DNA carrier. If the target is present, the two separate GQ parts will be brought together to facilitate the split GQ formation and enhance the nanopore signal. We demonstrated detection of multiple target sequences from different viruses with low crosstalk. Given the programmability of this DNA based nanopore sensing platform, it is promising in biosensing.

Coupling nucleic acid circuitry with the CRISPR-Cas12a system for universal and signal-on detection

We report a universal and signal-on HCR based detection platform via innovatively coupling the CRISPR-Cas12a system with HCR. By using this CRISPR-HCR pathway, we can detect different targets by only changing the crRNA. The CRISPR-HCR platform coupling with an upstream amplifier can achieve a practical sensitivity as low as ∼aM of ASFV gene in serum.

MUC1 detection and in situ imaging method based on aptamer conformational switch and hybridization chain reaction

Mucin 1 (MUC1) overexpression in tumor cells is related to various cancers, including breast, stomach, and lung cancer. MUC1 detection and imaging are important for cancer localization in tissue sections to support histopathological diagnosis. In this study, we developed a simple, enzyme-free MUC1 detection and in situ imaging method. Three hairpin probes, Apt-trigger, HP1-FAM, and HP2, were designed for MUC1 recognition and hybridization chain reaction (HCR). The Apt-trigger probe was composed of two sequences: the MUC1 aptamer and HCR trigger sequence. The 5' end of the HP1-FAM probe was modified with a FAM signal molecule. In the presence of MUC1, the aptamer sequence is activated and bound to MUC1, which opens the hairpin structure. Then, the trigger sequence gets exposed and, complementary to HP1-FAM, triggers a continuous HCR process. This method was successfully used to detect MUC1 of 200 pM-25 nM and MUC1 in situ imaging in specific cells, such as human breast carcinoma (MCF-7) and human colon cancer (HT-29) cells.

Signaling probe design for amplification-free detection of bacterial genes using DNA microarray

DNA microarrays are useful to detect microorganisms for various purposes including clinical testing and food safety. However, conventional DNA microarrays need complicated operations such as amplification, fluorescence labeling, and washing steps. To address this issue, we previously developed the signaling probe-based DNA microarray system that can eliminate these steps, and demonstrated a direct detection of bacterial genes. Nonetheless, this system requires well-designed probe sets due to the fluorescence resonance energy transfer (FRET)-based mode of action. Up to date, the probe design was highly dependent on the trial-and-error processes. In this study, we propose a strategy to rationally design the sequences of signaling probes based on the thermodynamic analysis. This analysis aided to improve the probe performance approximately 2.8 times, without experiments, by suppressing the secondary structure formation of the probes. We successfully demonstrated the specific and amplification-free detection of 5S rRNA from total RNA extracted from Escherichia coli within 30 min.