Hydrophilic 3D Interconnected Network of Bacterial Nanocellulose/Black Titania Photothermal Foams as an Efficient Interfacial Solar Evaporator

A lignin-derived carbon dot-upgraded bacterial cellulose membrane as an all-in-one interfacial evaporator for solar-driven water purification

Solar-driven interfacial evaporation has emerged as an efficient approach for wastewater treatment and seawater desalination. New trends demand adaptive technology to develop photothermal membranes with multifunctional features. Herein, we report a robust multi-purpose near-infrared (NIR)-active hydrogel composite (c-BC@N-LCD) from broad-spectrum active nitrogen-doped lignin-derived carbon dots (N-LCDs) covalently cross-linked with a bacterial cellulose (BC) matrix. BC provides adequate porosity and hydrophilicity required for easy water transport while managing heat loss. A commendable evaporation rate (ER) of 2.2 kg m-2 h-1 under one sun (1 kW m-2) is achieved by c-BC@N-LCD. The developed hydrogel system is also found to be efficient for desalination (∼2.1 kg m-2 h-1) and for remediating various pollutants (heavy metal ions, dyes, and pharmaceuticals) from feed water. The efficacy of the membrane remains unaltered by different grades of water, and hence can be adoptable for economically stressed communities living in water-polluted regions as well as those residing in coastal areas.

Bimetallic MOF-Derived Solar-Triggered Monolithic Adsorbent for Enhanced Atmospheric Water Harvesting

The development of economical, energy-saving, and efficient metal-organic framework (MOF)-based adsorbents for atmospheric water collection is highly imperative for the rapid advancement of renewable freshwater resource exploitation. Herein, a feasible one-step solvothermal formation strategy of bimetallic MOF (BMOF) is proposed and applied to construct a solar-triggered monolithic adsorbent for enhanced atmospheric water collection. Benefiting from the reorganization and adjustment of topology structure by Al atoms and Fe atoms, the resultant BMOF(3) consisting of Al-fumarate and MIL-88A has a higher specific surface area (1202.99 m2  g-1 ) and pore volume (0.51 cm3  g-1 ), thereby outperforming the parental MOFs and other potential MOFs in absorbing water. Expanding upon this finding, the solar-triggered monolithic adsorbent is further developed through a bottom-up assembly of polyaniline/chitosan layers and hybridized BMOF(3) skeletons on a glass fiber support. The resultant monolithic adsorbent exhibits superior sorption-desorption kinetics, leading to directional water transport and rapid solar-assisted vapor diffusion. As a proof-of-concept demonstration, an exquisite water harvester is constructed to emphasize a high water yield of 1.19 g g-1 per day of the designed monolithic adsorbent. Therefore, the design and validation of bimetallic MOF-derived solar-triggered adsorbent in this work are expected to provide a reference for the large-scale applications of MOF-based atmospheric water harvesting.

Water Activation in Solar-Powered Vapor Generation

Solar-powered vapor evaporation (SVG), based on the liquid-gas phase conversion concept using solar energy, has been given close attention as a promising technology to address the global water shortage. At molecular level, water molecules escaping from liquid water should overcome the attraction of the molecules on the liquid surface layer to evaporate. For this reason, it is better to reduce the energy required for evaporation by breaking a smaller number of hydrogen bonds or forming weak hydrogen bonds to ensure efficient and convenient vapor production. Many novel evaporator materials and effective water activation strategies have been proposed to stimulate rapid steam production and surpass the theoretical thermal limit. However, an in-depth understanding of the phase/enthalpy change process of water evaporation is unclear. In this review, a summary of theoretical analyses of vaporization enthalpy, general calculations, and characterization methods is provided. Various water activation mechanisms are also outlined to reduce evaporation enthalpy in evaporators. Moreover, unsolved issues associated with water activation are critically discussed to provide a direction for future research. Meanwhile, significant pioneering developments made in SVG are highlighted, hoping to provide a relatively entire chain for more scholars who are just stepping into this field.

Sulfonated PAM/PPy Cryogels with Lowered Evaporation Enthalpy for Highly Efficient Photothermal Water Evaporation

Because of the increasing scarcity of water resources, the desalination of seawater by photothermal evaporation with harvested solar energy has gradually become a popular research topic. The interconnected macroporous cryogel prepared from polymerization and crosslinking below the freezing temperature of the reactant solution has an excellent performance in photothermal water evaporation after loading photothermal materials. In this study, polyacrylamide (PAM) cryogels were prepared by cryo-polymerization and sulfonated in an alkaline solution containing formaldehyde and Na₂SO₃. Importantly, the evaporation enthalpy of water in sulfonated PAM cryogel was reduced to 1187 J·g^-1 due to the introduction of sulfonate groups into PAM, which was beneficial to increase the photothermal evaporation rate and efficiency. The sulfonated PAM cryogels loaded with polypyrrole and the umbrella-shaped melamine foam substrate were combined to form a photothermal evaporation device, and the evaporation rate was as high as 2.50 kg·m^-2·h^-1 under one-sun radiation. Meanwhile, the evaporation rate reached 2.09 kg·m^-2·h^-1 in the 14 wt% high-concentration saline solution, and no salt crystals appeared on the surface of the cryogel after 5 h of photothermal evaporation. Therefore, it was evidenced that the presence of sulfonate groups not only reduced the evaporation enthalpy of water but also prevented salting-out from blocking the water delivery channel during photothermal evaporation, with a sufficiently high evaporation rate, providing a reliable idea of matrix modification for the design of high-efficiency photothermal evaporation materials.

Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment

Cellulose is known to interact well with water, but is insoluble in it. Many polysaccharides such as cellulose are known to have significant hydrogen bond networks joining the molecular chains, and yet they are recalcitrant to aqueous solvents. This review charts the interaction of cellulose with water but with emphasis on the formation of both natural and synthetic fiber composites. Covering studies concerning the interaction of water with wood, the biosynthesis of cellulose in the cell wall, to its dispersion in aqueous suspensions and ultimately in water filtration and fiber-based composite materials this review explores water-cellulose interactions and how they can be exploited for synthetic and natural composites. The suggestion that cellulose is amphiphilic is critically reviewed, with relevance to its processing. Building on this, progress made in using various charged and modified forms of nanocellulose to stabilize oil-water emulsions is addressed. The role of water in the aqueous formation of chiral nematic liquid crystals, and subsequently when dried into composite films is covered. The review will also address the use of cellulose as an aid to water filtration as one area where interactions can be used effectively to prosper human life.

Interface Engineering of a Ti4O7 Nanofibrous Membrane for Efficient Solar-Driven Evaporation

Solar-driven interfacial evaporation provides a feasible and sustainable way to solve the fresh water shortage using abundant solar energy and has recently attracted considerable attention. However, it has been limited by the evaporation rate and solar-heat conversion efficiency of the current materials. Herein, a novel Ti₄O₇ membrane with synergetic photothermal and electrothermal effects was developed using a straightforward in situ approach. Based on interface engineering, the interface between the surface of the membrane and water was hydrophobically modified, and a thermal insulation layer was added to the bottom of the membrane. The optimized self-floating membrane with excellent sunlight absorbability and conductivity achieved a remarkably high evaporation rate of 7.51 kg m^-2 h^-1 with a voltage of 3 V as compensation under one-sun irradiation (1 kW m^-2). Moreover, the bilayered membrane displayed efficient salt ion rejection, and the collected water can meet the World Health Organization (WHO) standard required for potable water.

Cellulose Structures as a Support or Template for Inorganic Nanostructures and Their Assemblies

Cellulose is the most abundant natural polymer and deserves the special attention of the scientific community because it represents a sustainable source of carbon and plays an important role as a sustainable energent for replacing crude oil, coal, and natural gas in the future. Intense research and studies over the past few decades on cellulose structures have mainly focused on cellulose as a biomass for exploitation as an alternative energent or as a reinforcing material in polymer matrices. However, studies on cellulose structures have revealed more diverse potential applications by exploiting the functionalities of cellulose such as biomedical materials, biomimetic optical materials, bio-inspired mechanically adaptive materials, selective nanostructured membranes, and as a growth template for inorganic nanostructures. This article comprehensively reviews the potential of cellulose structures as a support, biotemplate, and growing vector in the formation of various complex hybrid hierarchical inorganic nanostructures with a wide scope of applications. We focus on the preparation of inorganic nanostructures by exploiting the unique properties and performances of cellulose structures. The advantages, physicochemical properties, and chemical modifications of the cellulose structures are comparatively discussed from the aspect of materials development and processing. Finally, the perspective and potential applications of cellulose-based bioinspired hierarchical functional nanomaterials in the future are outlined.

Facile synthesis of nanocellulose-based Cu2O/Ag heterostructure as a surface-enhanced Raman scattering substrate for trace dye detection

Semiconductor metal-oxide/metal heterostructures with synergetic properties have potential applications in photocatalysis and optical sensors. Here, Cu₂O sub-micro cubes were synthesized under environmentally benign conditions using 2, 2, 6, 6-tetramethylpyperdine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils as a reducing and stabilizing agent. Then the surface of the Cu₂O cubes was decorated with silver nanoparticles (AgNPs) by a substitution reaction. The Cu₂O/Ag heterostructures within the cellulose nanofibrils (CNFs) network were employed as a promising surface-enhanced Raman scattering (SERS) assay for efficient sensing of methylene blue (MB), reaching a maximum enhancement factor (EF) of 4.0 × 10⁴. Their SERS intensities depended on the coverage density of AgNPs and the wavelength of the excitation laser. The excellent SERS performance may result from the charge transfer between Ag and Cu₂O molecules and the strong electromagnetic field at the interface. The CNF-Cu₂O/Ag substrates were capable of detecting MB dye down to 10^-8 M level with a relative standard deviation of 10-15%, demonstrating great sensitivity and reproducibility.