Injectable Cell- and Growth Factor-Free Poly(4-hydroxybutyrate) (P4HB) Microspheres with Open Porous Structures and Great Efficiency of Promoting Bone Regeneration

Icariin upregulates methyltransferase-like 14-mediated prolyl 4-hydroxylase beta subunit m6A modification to promote osteogenic differentiation of bone marrow stem cells

Prolyl 4-hydroxylase beta subunit (P4HB) plays a vital role in bone formation. This study intends to clarify the role of P4HB in the therapeutic effect of Icariin (ICA) on osteoporosis. Herein, in vivo and in vitro models were constructed by performing ovariectomy (OVX) in rats and inducing osteogenic differentiation in bone marrow stem cells (BMSCs), respectively. Hematoxylin and eosin staining and micro-computed tomography analysis were performed to evaluate osteoporosis in OVX rats. Alizarin Red staining, alkaline phosphatase staining, and the ALP activity test were employed to assess osteogenesis. m6A dot blotting and methylated RNA immunoprecipitation were used to determine m6A modification. We found that P4HB was downregulated in bone tissues of patients with osteoporosis and OVX rats. P4HB facilitated osteogenic differentiation of BMSCs. What's more, ICA upregulated P4HB expression, promoted osteogenic differentiation of BMSCs, and alleviated osteoporosis in OVX rats, which were reversed by knocking down P4HB. ICA enhanced the stability and m6A modification of P4HB. METTL14 mediated m6A modification of P4HB mRNA. In addition, METTL14 knockdown overturned the promotive effects of ICA on P4HB m6A level and BMSC osteogenic differentiation. To sum up, ICA elevated the METTL14-mediated m6A modification of P4HB to facilitate BMSC osteogenic differentiation.

Fabrication of Bioresorbable Barrier Membranes from Gelatin/Poly(4-Hydroxybutyrate) (P4HB)

Dental implant surgery is a procedure that replaces damaged or missing teeth with an artificial implant. During this procedure, guided bone regeneration (GBR) membranes are commonly used to inhibit the migration of epithelium and GBR at the surgical sites. Due to its biodegradability, good biocompatibility, and unique biological properties, gelatin (GT) is considered a suitable candidate for guiding periodontal tissue regeneration. However, GT-based membranes come with limitations, such as poor mechanical strength and mismatched degradation rates. To confront this challenge, a series of GT/poly(4-hydroxybutyrate) (P4HB) composite membranes are fabricated through electrospinning technology. The morphology, composition, wetting properties, mechanical properties, biocompatibility, and in vivo biodegradability of the as-prepared composite membranes are carefully characterized. The results demonstrate that all the membranes present excellent biocompatibility. Moreover, the in vivo degradation rate of the membranes can be manipulated by changing the ratio of GT and P4HB. The results indicate that the optimized GT/P4HB membranes with a high P4HB content (75%) may be suitable for periodontal tissue engineering because of their good mechanical properties and biodegradation rate compatible with tissue growth.

Multifunctional Fluorinated Lubricant-Infused Poly(4-Hydroxybutyrate) (P4HB) Membranes for Full-Thickness Abdominal Wall Defect Repair

Abdominal wall defect caused by surgical trauma, congenital rupture, or tumor resection may result in hernia formation or even death. Tension-free abdominal wall defect repair by using patches is the gold standard to solve such problems. However, adhesions following patch implantation remain one of the most challenging issues in surgical practice. The development of new kinds of barriers is key to addressing peritoneal adhesions and repairing abdominal wall defects. It is already well recognized that ideal barrier materials need to have good resistance to nonspecific protein adsorption, cell adhesion, and bacterial colonization for preventing the initial development of adhesion. Herein, electrospun poly(4-hydroxybutyrate) (P4HB) membranes infused with perfluorocarbon oil are used as physical barriers. The oil-infused P4HB membranes can greatly prevent protein attachment and reduce blood cell adhesion in vitro. It is further shown that the perfluorocarbon oil-infused P4HB membranes can reduce bacterial colonization. The in vivo study reveals that perfluoro(decahydronaphthalene)-infused P4HB membranes can significantly prevent peritoneal adhesions in the classic abdominal wall defects' model and accelerate defect repair, as evidenced by gross examination and histological evaluation. This work provides a safe fluorinated lubricant-impregnated P4HB physical barrier to inhibit the formation of postoperative peritoneal adhesions and efficiently repair soft-tissue defects.

Polyhydroxyalkanoates: the natural biopolyester for future medical innovations

Polyhydroxyalkanoates (PHAs) are a family of natural microbial biopolyesters with the same basic chemical structure and diverse side chain groups. Based on their excellent biodegradability, biocompatibility, thermoplastic properties and diversity, PHAs are highly promising medical biomaterials and elements of medical devices for applications in tissue engineering and drug delivery. However, due to the high cost of biotechnological production, most PHAs have yet to be applied in the clinic and have only been studied at laboratory scale. This review focuses on the biosynthesis, diversity, physical properties, biodegradability and biosafety of PHAs. We also discuss optimization strategies for improved microbial production of commercial PHAs via novel synthetic biology tools. Moreover, we also systematically summarize various medical devices based on PHAs and related design approaches for medical applications, including tissue repair and drug delivery. The main degradation product of PHAs, 3-hydroxybutyrate (3HB), is recognized as a new functional molecule for cancer therapy and immune regulation. Although PHAs still account for only a small percentage of medical polymers, up-and-coming novel medical PHA devices will enter the clinical translation stage in the next few years.

Novel In Situ-Cross-Linked Electrospun Gelatin/Hydroxyapatite Nonwoven Scaffolds Prove Suitable for Periodontal Tissue Engineering

Periodontal diseases affect millions of people worldwide and can result in tooth loss. Regenerative treatment options for clinical use are thus needed. We aimed at developing new nonwoven-based scaffolds for periodontal tissue engineering. Nonwovens of 16% gelatin/5% hydroxyapatite were produced by electrospinning and in situ glyoxal cross-linking. In a subset of scaffolds, additional porosity was incorporated via extractable polyethylene glycol fibers. Cell colonization and penetration by human mesenchymal stem cells (hMSCs), periodontal ligament fibroblasts (PDLFs), or cocultures of both were visualized by scanning electron microscopy and 4′,6-diamidin-2-phenylindole (DAPI) staining. Metabolic activity was assessed via Alamar Blue^® staining. Cell type and differentiation were analyzed by immunocytochemical staining of Oct4, osteopontin, and periostin. The electrospun nonwovens were efficiently populated by both hMSCs and PDLFs, while scaffolds with additional porosity harbored significantly more cells. The metabolic activity was higher for cocultures of hMSCs and PDLFs, or for PDLF-seeded scaffolds. Periostin and osteopontin expression was more pronounced in cocultures of hMSCs and PDLFs, whereas Oct4 staining was limited to hMSCs. These novel in situ-cross-linked electrospun nonwoven scaffolds allow for efficient adhesion and survival of hMSCs and PDLFs. Coordinated expression of differentiation markers was observed, which rendered this platform an interesting candidate for periodontal tissue engineering.

Slippery 3-dimensional porous bioabsorbable membranes with anti-adhesion and bactericidal properties as substitute for vaseline gauze

Vaseline gauze is a common type of wound dressing that consist of absorbent gauze impregnated with white petrolatum. It has excellent anti-adhesive property which can reduce trauma during dressing changes. However, this kind of wound dressing doesn't have bacterial killing property. Thus, a new kind of wound dressing that has anti-adhesive and bactericidal properties is needed urgently. Creating slippery liquid-impregnated porous surfaces (SLIPS) that insensitive to the structure of porous solid are generally viewed as a new anti-adhesion strategy. To expand the potential utility of SLIPS as substitute for vaseline gauze, dual-functional slippery membranes with anti-adhesion and bactericidal properties by using triclosan, vegetable oils and polylactic acid (PLA) were prepared. It's demonstrated that the triclosan-loaded/vegetable oils-infused PLA membranes (T/V-PM) has good cytocompatibility in vitro. Notably, the T/V-PM can gradually release biocide molecule into surrounding aqueous media. Moreover, the T/V-PM can kill planktonic bacterial cells without loss of their antifouling property. The in vivo study revealed that the T/V-PM can prevent the secondary injuries during wound dressing changes. This simple and low-cost strategy can be applied to inhibit blood and bacterial adhesion, and prevent tissue adhesion at the wound site. It's confirmed that the T/V-PM have great potential as substitute for vaseline gauze.

Bioactive Poly(4-hydroxybutyrate)/Poly(ethylene glycol) Fibrous Dressings Incorporated with Zinc Oxide Nanoparticles for Efficient Antibacterial Therapy and Rapid Clotting

Antibacterial and hemostatic. This article is protected by copyright. All rights reserved.

A Polyhydroxyalkanoates-Based Carrier Platform of Bioactive Substances for Therapeutic Applications

Bioactive substances (BAS), such as small molecule drugs, proteins, RNA, cells, etc., play a vital role in many therapeutic applications, especially in tissue repair and regeneration. However, the therapeutic effect is still a challenge due to the uncontrollable release and instable physico-chemical properties of bioactive components. To address this, many biodegradable carrier systems of micro-nano structures have been rapidly developed based on different biocompatible polymers including polyhydroxyalkanoates (PHA), the microbial synthesized polyesters, to provide load protection and controlled-release of BAS. We herein highlight the developments of PHA-based carrier systems in recent therapeutic studies, and give an overview of its prospective applications in various disease treatments. Specifically, the biosynthesis and material properties of diverse PHA polymers, designs and fabrication of micro- and nano-structure PHA particles, as well as therapeutic studies based on PHA particles, are summarized to give a comprehensive landscape of PHA-based BAS carriers and applications thereof. Moreover, recent efforts focusing on novel-type BAS nano-carriers, the functionalized self-assembled PHA granules in vivo, was discussed in this review, proposing the underlying innovations of designs and fabrications of PHA-based BAS carriers powered by synthetic biology. This review outlines a promising and applicable BAS carrier platform of novelty based on PHA particles for different medical uses.

Controllable preparation of bioactive open porous microspheres for tissue engineering

Biodegradable microspheres have been widely applied as cell carriers for tissue engineering and regenerative medicine. However, most cell carriers only have simple planar structure and show poor biological activity and...

Bioabsorbable poly(4-hydroxybutyrate) (P4HB) fibrous membranes as a potential dermal substitute

Dermal substitutes are indispensable for repairing large full-thickness skin defects. Only a few biomaterials for dermal substitution have been put into clinical practice. Therefore, novel artificial dermal substitutes that can meet clinical requirements are in urgent need. Biodegradable poly(4-hydroxybutyrate) (P4HB), which has been approved by the U.S. FDA, can be considered as a possible alternative biomaterial to construct dermal substitutes. In this work, three-dimensional P4HB fibrous membranes were constructed by an electrospinning technique. These P4HB fibrous membranes showed excellent air-permeability, and better water uptake capacity compared to P4HB strip and polycaprolactone (PCL) fibrous membrane controls. The in vitro hemocompatibility and cytotoxicity of P4HB fibrous membranes were investigated. In vivo Sprague-Dawley (SD) rat model studies revealed that P4HB fibrous membranes can be used as artificial dermis to improve wound healing for full-thickness skin defects.