Photodynamic Activity of Graphene Oxide/Polyaniline/Manganese Oxide Ternary Composites toward Both Gram-Positive and Gram-Negative Bacteria

Impact of alternate Mn doping in ternary nanocomposites on their structural, optical and antimicrobial properties: Comparative analysis of photocatalytic degradation and antibacterial activity

The present study was done to investigate and compare the photocatalytic and antibacterial activity of two in situ Manganese doped ternary nanocomposites. The dual ternary hybrid systems comprised Mn-doped Ag₂WO₄ coupled with MoS₂-GO and Mn-doped MoS₂ coupled with Ag₂WO₄-GO. Both hierarchical alternate Mn-doped ternary heterojunctions formed efficient plasmonic catalysts for wastewater treatment. The novel nanocomposites were well-characterized using XRD, FTIR, SEM-EDS, HR-TEM, XPS, UV-VIS DRS, and PL techniques confirming the successful insertion of Mn⁺² ions in respective host substrates. The bandgap of the ternary nanocomposites evaluated by the tauc plot showed them visible light-active nanocomposites. The photocatalytic ability of both Mn-doped coupled nanocomposites was investigated against the dye methylene blue. Both ternary nanocomposites showed excellent sunlight harvesting ability for dye degradation in 60 min. The maximum catalytic efficiency of both photocatalysts was obtained at a solution pH value of 8, photocatalyst dose and oxidant dose of 30 mg/100 mL and 1 mM for Mn-Ag₂WO₄/MoS₂-GO, 50 mg/100 mL, 3 mM for Mn-MoS₂/Ag₂WO₄-GO keeping IDC of 10 ppm for all photocatalysts. The nanocomposites showed excellent photocatalytic stability after five successive cycles. The response surface methodology was used as a statistical tool for the evaluation of the photocatalytic response of several interacting parameters for dye degradation by ternary composites. The antibacterial activity was determined by the inactivation of gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria by support-based doped ternary hybrids.

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Invisible Bactericidal Coatings on Generic Surfaces through a Convenient Hand Spray

Robust antimicrobial coatings featuring high transparency, strong bactericidal activity, and an easy application procedure on generic surfaces can be widely accepted by the public to prevent pandemics. In this work, we demonstrated the hand-sprayer-based approach to deposit complex oxide coatings composed of Co-Mn-Cu-Zn-Ag on screen protectors of smartphones through acidic redox-assisted deposition (ARD). The as-obtained coatings possess high transparency (99.74% transmittance at 550 nm) and long-lasting durability against swiping (for 135 days of average use) or wet cleaning (for a routine of 3 times/day for 33 days). The spray coating enabling 3.14% Escherichia coli viability can further be reduced to 0.21% through a consistent elemental composition achieved via the immersion method. The high intake of Cu²⁺ in the coating is majorly responsible for the bactericidal activity, and the presence of Ag⁺ and Zn²⁺ is necessary to achieve almost complete eradication. The success of extending the bactericidal coatings on other typical hand-touched surfaces (e.g., stainless steel railings, rubber handrails, and plastic switches) in public areas has been demonstrated.

High-Efficiency Photodynamic Antibacterial Activity of NH2-MIL-101(Fe)@MoS2/ZnO Ternary Composites

Bacterial infections are a serious threat to human health, and the development of effective antibacterial agents represents a critical solution. In this study, NH₂-MIL-101(Fe)@MoS₂/ZnO ternary nanocomposites are successfully prepared by a facile wet-chemistry procedure, where MoS₂ nanosheets are grown onto the MIL-101 scaffold forming a flower-like morphology with ZnO nanoparticles deposited onto the surface. The ternary composites exhibit a remarkable sterilization performance under visible light irradiation toward both Gram-negative and Gram-positive bacteria, eliminating 98.6% of Escherichia coli and 90% of Staphylococcus aureus after exposure to visible light for 30 min, a performance markedly better than that with NH₂-MIL-101(Fe)@MoS₂ binary composites and even more so than MoS₂ nanosheets alone. This is ascribed to the unique electronic band structure of the composites, where the separation of the photogenerated carriers is likely facilitated by the S-scheme mechanism in the NH₂-MIL-101(Fe)@MoS₂ binary composites and further enhanced by the formation of a p-n heterojunction between MoS₂ and ZnO in the ternary composites. This interfacial charge transfer boosts the effective production of superoxide radicals by the reduction of oxygen, and the disproportionation reaction with water leads to the formation of hydroxy radicals, as attested in spectroscopic and microscopic measurements. Results from this study highlight the significance of structural engineering of nanocomposites in the manipulation of the electronic band structure and hence the photodynamic activity.

Advances in Biologically Applicable Graphene-Based 2D Nanomaterials

Climate change and increasing contamination of the environment, due to anthropogenic activities, are accompanied with a growing negative impact on human life. Nowadays, humanity is threatened by the increasing incidence of difficult-to-treat cancer and various infectious diseases caused by resistant pathogens, but, on the other hand, ensuring sufficient safe food for balanced human nutrition is threatened by a growing infestation of agriculturally important plants, by various pathogens or by the deteriorating condition of agricultural land. One way to deal with all these undesirable facts is to try to develop technologies and sophisticated materials that could help overcome these negative effects/gloomy prospects. One possibility is to try to use nanotechnology and, within this broad field, to focus also on the study of two-dimensional carbon-based nanomaterials, which have excellent prospects to be used in various economic sectors. In this brief up-to-date overview, attention is paid to recent applications of graphene-based nanomaterials, i.e., graphene, graphene quantum dots, graphene oxide, graphene oxide quantum dots, and reduced graphene oxide. These materials and their various modifications and combinations with other compounds are discussed, regarding their biomedical and agro-ecological applications, i.e., as materials investigated for their antineoplastic and anti-invasive effects, for their effects against various plant pathogens, and as carriers of bioactive agents (drugs, pesticides, fertilizers) as well as materials suitable to be used in theranostics. The negative effects of graphene-based nanomaterials on living organisms, including their mode of action, are analyzed as well.

Modification strategies of membranes with enhanced Anti-biofouling properties for wastewater Treatment: A review

This review addresses composite membranes used for wastewater treatment, focusing heavily on the anti-biofouling properties of such membranes. Biofouling caused by the development of a thick biofilm on the membrane surface is a major issue that reduces water permeance and reduces its lifetime. Biofilm formation and adhesion are mitigated by modifying membranes with two-dimensional or zero-dimensional carbon-based nanomaterials or their modified substituents. In particular, nanomaterials based on graphene, including graphene oxide and carbon quantum dots, are mainly used as nanofillers in the membrane. Functionalization of the nanofillers with various organic ligands or compositing the nanofiller with other materials, such as silver nanoparticles, enhances the bactericidal ability of composite membranes. Moreover, such membrane modifications reduce biofilm adhesion while increasing water permeance and salt/dye rejection. This review discusses the recent literature on developing graphene oxide-based and carbon quantum dot-based composite membranes for biofouling-resistant wastewater treatment.