Microencapsulation for Food Applications: A Review

Coatings Based on Essential Oils for Combating Antibiotic Resistance

In the current era of widespread antimicrobial resistance, the utilization of essential oils (EOs) derived from plants has emerged as a promising alternative in combating pathogens that have developed resistance to antibiotics. This review explores the therapeutic potential of essential oils as valuable tools in restoring the efficacy of antibiotics, highlighting their unique ability to affect bacteria in multiple ways and target various cellular systems. Despite the challenge of elucidating their precise mode of action, EOs have shown remarkable results in rigorous testing against a diverse range of bacteria. This review explores the multifaceted role of EOs in combating bacterial microorganisms, emphasizing their extraction methods, mechanisms of action, and comparative efficacy against synthetic antibiotics. Key findings underscore the unique strategies EOs deploy to counter bacteria, highlighting significant differences from conventional antibiotics. The review extends to advanced coating solutions for medical devices, exploring the integration of EO formulations into these coatings. Challenges in developing effective EO coatings are addressed, along with various innovative approaches for their implementation. An evaluation of these EO coatings reveals their potential as formidable alternatives to traditional antibacterial agents in medical device applications. This renaissance in exploring natural remedies emphasizes the need to combine traditional wisdom with modern scientific advancements to address the urgent need for effective antimicrobial solutions in the post-antibiotic era.

Spray-drying of PEI-/PPI-based nanoparticles for DNA or siRNA delivery

Spray-drying of nucleic acid-based drugs designed for gene therapy or gene knockdown is associated with many advantages including storage stability and handling as well as the possibility of pulmonary application. The encapsulation of nucleic acids in nanoparticles prior to spray-drying is one strategy for obtaining efficient formulations. This, however, strongly relies on the definition of optimal nanoparticles, excipients and spray-drying conditions. Among polymeric nanoparticles, polyethylenimine (PEI)-based complexes with or without chemical modifications have been described previously as very efficient for gene or oligonucleotide delivery. The tyrosine-modification of linear or branched low molecular weight PEIs, or of polypropylenimine (PPI) dendrimers, has led to high complex stability, improved cell uptake and transfection efficacy as well as high biocompatibility. In this study, we identify optimal spray-drying conditions for PEI-based nanoparticles containing large plasmid DNA or small siRNAs, and further explore the spray-drying of nanoparticles containing chemically modified polymers. Poly(vinyl alcohol) (PVA), but not trehalose or lactose, is particularly well-suited as excipient, retaining or even enhancing transfection efficacies compared to fresh complexes. A big mesh size is critically important as well, while the variation of the spray-drying temperature plays a minor role. Upon spray-drying, microparticles in a ∼ 3.3 - 8.5 µm size range (laser granulometry) are obtained, dependent on the polymers. Upon their release from the spray-dried material, the nanoparticles show increased sizes and markedly altered zeta potentials as compared to their fresh counterparts. This may contribute to their high efficacy that is seen also after prolonged storage of the spray-dried material. We conclude that these spray-dried systems offer a great potential for the preparation of nucleic acid drug storage forms with facile reconstitution, as well as for their direct pulmonary application as dry powder.

Inhibitory effect of natural compounds on quorum sensing system in Pseudomonas aeruginosa: a helpful promise for managing biofilm community

Pseudomonas aeruginosa biofilm is a community of bacteria that adhere to live or non-living surfaces and are encapsulated by an extracellular polymeric substance. Unlike individual planktonic cells, biofilms possess a notable inherent resistance to sanitizers and antibiotics. Overcoming this resistance is a substantial barrier in the medical and food industries. Hence, while antibiotics are ineffective in eradicating P. aeruginosa biofilm, scientists have explored alternate strategies, including the utilization of natural compounds as a novel treatment option. To this end, curcumin, carvacrol, thymol, eugenol, cinnamaldehyde, coumarin, catechin, terpinene-4-ol, linalool, pinene, linoleic acid, saponin, and geraniol are the major natural compounds extensively utilized for the management of the P. aeruginosa biofilm community. Noteworthy, the exact interaction of natural compounds and the biofilm of this bacterium is not elucidated yet; however, the interference with the quorum sensing system and the inhibition of autoinducer production in P. aeruginosa are the main possible mechanisms. Noteworthy, the use of different drug platforms can overcome some drawbacks of natural compounds, such as insolubility in water, limited oral bioavailability, fast metabolism, and degradation. Additionally, drug platforms can deliver different antibiofilm agents simultaneously, which enhances the antibiofilm potential of natural compounds. This article explores many facets of utilizing natural compounds to inhibit and eradicate P. aeruginosa biofilms. It also examines the techniques and protocols employed to enhance the effectiveness of these compounds.

The application of encapsulation technology in the food Industry: Classifications, recent Advances, and perspectives

Encapsulation technology has been extensively used to enhance the stability, specificity, and bioavailability of essential food ingredients. Additionally, it plays a vital role in improving product quality and reducing production costs. This study presents a comprehensive classification of encapsulation techniques based on the state of different cores (solid, liquid, and gaseous) and offers a detailed description and analysis of these encapsulation methods. Specifically, it introduces the diverse applications of encapsulation technology in food, encompassing areas such as antioxidant, protein activity, physical stability, controlled release, delivery, antibacterial, and probiotics. The potential impact of encapsulation technology is expected to make encapsulation technology a major process and research hotspot in the food industry. Future research directions include applications of encapsulation for enzymes, microencapsulation of biosensors, and novel technologies such as self-assembly. This study provides a valuable theoretical reference for the in-depth research and wide application of encapsulation technology in the food industry.

Gardenia yellow pigment: Extraction methods, biological activities, current trends, and future prospects

Food coloring plays a vital role in influencing consumers' food choices, imparting vibrant and appealing colors to various food and beverage products. Synthetic food colorants have been the most commonly used coloring agents in the food industry. However, concerns about potential health issues related to synthetic colorants, coupled with increasing consumer demands for food safety and health, have led food manufacturers to explore natural alternatives. Natural pigments not only offer a wide range of colors to food products but also exhibit beneficial bioactive properties. Gardenia yellow pigment is a water-soluble natural pigment with various biological activities, widely present in gardenia fruits. Therefore, this paper aims to delve into Gardenia Yellow Pigment, highlighting its significance as a food colorant. Firstly, a thorough understanding and exploration of various methods for obtaining gardenia yellow pigment. Subsequently, the potential functionality of gardenia yellow pigment was elaborated, especially its excellent antioxidant and neuroprotective properties. Finally, the widespread application trend of gardenia yellow pigment in the food industry was explored, as well as the challenges faced by the future development of gardenia yellow pigment in the field of food and health. Some feasible solutions were proposed, providing valuable references and insights for researchers, food industry professionals, and policy makers.

Preparation, Characterization, and Bioactivity Evaluation of Lambda-Cyhalothrin Microcapsules for Slow-Controlled Release System

The utilization of interfacial polymerization in the preparation of microcapsules with a slow-controlled release has been shown to effectively improve pesticide efficacy and reduce environmental pollution. In this study, polyurea microcapsules loaded with lambda-cyhalothrin were prepared by an interfacial polymerization method using modified isocyanate (MDI) as the wall material and GT-34 as the initiator. The microcapsules were fully characterized by optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, etc., and release behaviors were investigated. The results indicated that the microcapsules had a smooth surface and uniform distribution, the average particle size of the microcapsules was 1.97 μm, and the encapsulation efficiency of lambda-cyhalothrin microcapsules could reach 91.48%. Compared with other commercial formulations, the microcapsules exhibited an excellent sustained release property (>7 days) in a 50% acetonitrile aqueous solution (v/v). Subsequently, in vitro release studies showed that the lambda-cyhalothrin microcapsules could consistently control the release of the core materials at different pH, temperature, and MDI addition amount conditions. The release of lambda-cyhalothrin microcapsules was in accordance with the first-order model release, which was mainly by the Fickian diffusion mechanism. Furthermore, the biological activity on Myzus persicae showed that the microcapsules' persistence period was above 21 days, which was longer than that for the emulsifiable concentrate formulation.

Preparation and Physicochemical Analysis of Camellia sinensis cv. 'Ziyan' Anthocyanin Microcapsules

The new tea cultivar Ziyan has a high content of anthocyanin and ester catechins in the raw material, but the conventional processing and application methods are limited. To explore its application potential, the freeze-drying method was used to prepare microcapsules with an embedding time of 30 min, solid content of 30%, and core to wall ratio of 1:10 (g/g). The anthocyanin recovery was 95.94 ± 0.50%, and the encapsulation efficiency was 96.15 ± 0.11%. The stability of microcapsules and composite wall materials was evaluated in the simulation system. Results showed that microcapsules employing a maltodextrin-gum arabic ratio of 2:8 (w/w) as the wall material significantly reduced degradation rates, extending anthocyanin half-life under various storage conditions. Characterization indicated improved physical properties of Ziyan anthocyanin powder post-microencapsulation. FT-IR and DSC- revealed the formation of a new phase between anthocyanins and wall materials, leading to increased enthalpy and enhanced thermal stability. The microencapsulation results of this experiment proved that the storage stability of anthocyanin was effectively enhanced.

Microencapsulation for Pharmaceutical Applications: A Review

In order to improve bioavailability, stability, control release, and target delivery of active pharmaceutical ingredients (APIs), as well as to mask their bitter taste, to increase their efficacy, and to minimize their side effects, a variety of microencapsulation (including nanoencapsulation, particle size <100 nm) technologies have been widely used in the pharmaceutical industry. Commonly used microencapsulation technologies are emulsion, coacervation, extrusion, spray drying, freeze-drying, molecular inclusion, microbubbles and microsponge, fluidized bed coating, supercritical fluid encapsulation, electro spinning/spray, and polymerization. In this review, APIs are categorized by their molecular complexity: small APIs (compounds with low molecular weight, like Aspirin, Ibuprofen, and Cannabidiol), medium APIs (compounds with medium molecular weight like insulin, peptides, and nucleic acids), and living microorganisms (such as probiotics, bacteria, and bacteriophages). This article provides an overview of these microencapsulation technologies including their processes, matrix, and their recent applications in microencapsulation of APIs. Furthermore, the advantages and disadvantages of these common microencapsulation technologies in terms of improving the efficacy of APIs for pharmaceutical treatments are comprehensively analyzed. The objective is to summarize the most recent progresses on microencapsulation of APIs for enhancing their bioavailability, control release, target delivery, masking their bitter taste and stability, and thus increasing their efficacy and minimizing their side effects. At the end, future perspectives on microencapsulation for pharmaceutical applications are highlighted.

Optimal omegas - barriers and novel methods to narrow omega-3 gaps. A narrative review

Dietary intakes of omega-3 long chain polyunsaturated fatty acids (O3LC-PUFAs) such as eicosapentaenoic and docosahexaenoic acid are central to development and health across the life course. O3LC-PUFAs have been linked to neurological development, maternal and child health and the etiology of certain non-communicable diseases including age-related cognitive decline, cardiovascular disease, and diabetes. However, dietary inadequacies exist in the United Kingdom and on a wider global scale. One predominant dietary source of O3LC-PUFAs is fish and fish oils. However, growing concerns about overfishing, oceanic contaminants such as dioxins and microplastics and the trend towards plant-based diets appear to be acting as cumulative barriers to O3LC-PUFAs from these food sources. Microalgae are an alternative provider of O3LC-PUFA-rich oils. The delivery of these into food systems is gaining interest. The present narrative review aims to discuss the present barriers to obtaining suitable levels of O3LC-PUFAs for health and wellbeing. It then discusses potential ways forward focusing on innovative delivery methods to utilize O3LC-PUFA-rich oils including the use of fortification strategies, bioengineered plants, microencapsulation, and microalgae.

Chicoric acid inserted in protein Z cavity exhibits higher stability and better wound healing effect under oxidative stress

Oxidative stress is one of the limiting factors that inhibit wound healing. Phytochemicals especially chicoric acid have the potential to act as an antioxidant and scavenge reactive oxygen species, thereby promoting wound healing. However, most of the phytochemicals were easy to be degraded during storage or using due to the oxidative status in wound site. Herein, we introduce a high stable protein Z that can encapsulate chicoric acid during foaming. TEM results showed that the size of protein Z-chicoric acid is in the range of nanoscale (named PZ-CA nanocomposite), and protein Z encapsulation can significantly improve the stability of chicoric acid under oxidative stress. Moreover, PZ-CA nanocomposite exhibited favorable antioxidant properties, biocompatibility, and the ability to promote cell migration in vitro. The role of PZ-CA nanocomposite in skin regeneration was explored by a mice model. Results in vivo suggest that the PZ-CA nanocomposite promotes wound healing with a faster rate as compared with a commercial spray solution, mostly through attenuating the oxidative stress, promoting cell proliferation and collagen deposition. This work not only provides a delivery vector for bioactive molecules, but also develops a kind of nanocomposite with the property of promoting wound healing.

Stability of Hydroxy-α-Sanshool in Medium-Chain Triglyceride Oil and Corresponding Oil/Water Emulsions

The pungent component of sansho (Japanese pepper, Zanthoxylum pipritum) is sanshool, which is easily oxidized and decomposed. We have previously reported several sanshool stabilizers, such as α-tocopherol (α-Toc). Sansho pericarp powder treated with middle-chain triglycerides (MCTs) can be used to obtain extracts containing hydroxy-α-sanshool (HαS). Although HαS is stabilized when α-Toc is added to the MCT extracts, the loss of HαS is accelerated when it is mixed with a powder such as lactose. The separation of α-Toc from sanshools was thought to inevitably lead to their oxidation. Therefore, using sansho pericarp MCT extracts with or without α-Toc, oil/water (o/w) emulsions were prepared by adding a surfactant, glycerin, and water to these extracts. In both emulsions, HαS was stable in accelerated tests at 50 °C. However, when lactose powder was added to the emulsions and an accelerated test was performed, HαS in the emulsion containing α-Toc was stable, but HαS in the emulsion without α-Toc was unstable. These results highlight the importance of maintaining the close proximity of HαS and α-Toc in the emulsion. The stabilization of sanshools using emulsion technology can facilitate the production of various processed beverages, foods, cosmetics, and pharmaceuticals containing Japanese pepper.

Development of Crosslinker-Free Polysaccharide-Lysozyme Microspheres for Treatment Enteric Infection

Antibiotic abuse in the conventional treatment of microbial infections, such as inflammatory bowel disease, induces cumulative toxicity and antimicrobial resistance which requires the development of new antibiotics or novel strategies for infection control. Crosslinker-free polysaccharide-lysozyme microspheres were constructed via an electrostatic layer-by-layer self-assembly technique by adjusting the assembly behaviors of carboxymethyl starch (CMS) on lysozyme and subsequently outer cationic chitosan (CS) deposition. The relative enzymatic activity and in vitro release profile of lysozyme under simulated gastric and intestinal fluids were investigated. The highest loading efficiency of the optimized CS/CMS-lysozyme micro-gels reached 84.9% by tailoring CMS/CS content. The mild particle preparation procedure retained relative activity of 107.4% compared with free lysozyme, and successfully enhanced the antibacterial activity against E. coli due to the superposition effect of CS and lysozyme. Additionally, the particle system showed no toxicity to human cells. In vitro digestibility testified that almost 70% was recorded in the simulated intestinal fluid within 6 h. Results demonstrated that the cross-linker-free CS/CMS-lysozyme microspheres could be a promising antibacterial additive for enteric infection treatment due to its highest effective dose (573.08 μg/mL) and fast release at the intestinal tract.

The Protective Role of Scorias spongiosa Polysaccharide-Based Microcapsules on Intestinal Barrier Integrity in DSS-Induced Colitis in Mice

Scorias spongiosa, a type of edible fungus, is beneficial for intestinal health. However, the mechanisms by which polysaccharides derived from S. spongiosa contribute to the integrity of the intestinal barrier have been little investigated. In the present study, 40 C57BL/6J mice were assigned into five groups: (1) Normal; (2) Dextran sulfate sodium (DSS)Administration; (3) DSS + Uncapped polysaccharides; (4) DSS + Low microcapsules; (5) DSS + High microcapsules. After one week of administration of S. spongiosa polysaccharides, all mice, excluding the Normal group, had free access to the drinking water of 3.5% DSS for seven days. Serum and feces were then taken for analysis. Scanning electron microscopy analysis indicated the structure of the micro-capped polysaccharides with curcumin was completed with a rough surface, which differs from the uncapped polysaccharides. Noticeably, S. spongiosa polysaccharides enhanced intestinal barrier integrity as evidenced by increasing the protein levels of Claudin-1, ZO-1 and ZO-2. Low-capped polysaccharides mitigated the DSS-induced oxidative stress by increasing catalase (CAT) concentration and decreasing malondialdehyde (MDA) and myeloperoxidase (MPO) concentrations. Besides, DSS treatment caused a disturbance of inflammation and the contents of IL-1β, IL-6, TNF-α and CRP were downregulated and the contents of IL-4, IL-10 and IFN-γ were upregulated by S. spongiosa polysaccharides. Research on the potential mechanisms indicated that S. spongiosa polysaccharides inhibited the DSS-triggered activation of NF-κB signaling. Moreover, the JAK/STAT1 and MAPK pathways were suppressed by S. spongiosa polysaccharides in DSS-challenged mice, with Lcap showing the strongest efficacy. 16S rDNA amplicon sequencing revealed that the richness and diversity of the microbial community were reshaped by S. spongiosa polysaccharide ingestion. Therefore, our study substantiated that S. spongiosa polysaccharides exhibited protective effects against colitis mice by reshaping the intestinal microbiome and maintaining the balance of intestinal barrier integrity, antioxidant capacity and colonic inflammation through regulation of the NF-κB-STAT1-MAPK axis.