2D Gelatin Methacrylate Hydrogels with Tunable Stiffness for Investigating Cell Behaviors

The Role of Matrix Stiffness And Viscosity on Lipid Phenotype And Fat Lineage Potential

Autologous fat transfer is a common procedure that patients undergo to rejuvenate large soft tissue defects. However, these surgeries are complicated by limited tissue sources, donor-site morbidity, and necrosis. While the biofabrication of fat tissue can serve as a clinical option for reconstructive surgery, the influence of matrix mechanics, specifically stiffness and viscosity, on adipogenesis requires further elucidation. Additionally, the effects of these mechanical parameters on metabolic and thermogenic fat potential have yet to be investigated. In this study, gelatin methacryloyl (GelMA) polymers with varying degrees of methacrylation (DoM) were fabricated to create matrices with different stiffnesses and viscosities. Human adipose-derived mesenchymal stem cells were then encapsulated in mechanically tunable GelMA and underwent adipogenesis to investigate the effects of matrix mechanics on lipid phenotype and fat potential. Mechanical testing confirmed that GelMA stiffness was regulated by DoM and weight composition, whereas viscosity was determined by the latter. Further work revealed that while lipid phenotype became more enriched as matrix stiffness and viscosity declined, the potential toward metabolic and thermogenic fat appeared to be more viscous dependent rather than stiffness dependent. In addition, fatty acid binding protein 4 and uncoupling protein 1 gene expression exhibited viscous-dependent behavior despite comparable levels of peroxisome proliferator-activated receptor gamma. However, despite the superior role of viscosity, lipid quantity and mitochondrial abundance demonstrated stiffness-dependent behavior. Overall, this work revealed that matrix viscosity played a more superior role than stiffness in driving adipogenesis and distinguishing between metabolic and thermogenic fat potential. Ultimately, this differentiation in fat production is important for engineering ideal adipose tissue for large soft tissue defects.

Enhanced hepatotoxicity assessment through encapsulated HepG2 spheroids in gelatin hydrogel matrices: Bridging the gap from 2D to 3D culture

Conventional 2D drug screening often fails to accurately predict clinical outcomes. We present an innovative approach to improve hepatotoxicity assessment by encapsulating HepG2 spheroids in gelatin hydrogel matrices with different mechanical properties. Encapsulated spheroids exhibit sustained liver-specific functionality, enhanced expression of drug-metabolizing enzymes, and increased drug sensitivity compared to 2D cultures. The platform detects critical variations in drug response, with significant differences in IC50 values between 2D and spheroid cultures ranging from 1.3-fold to > 13-fold, particularly for acetaminophen. Furthermore, drug-metabolizing enzyme expression varies across hydrogel concentrations, suggesting a role for matrix mechanical properties in modulating hepatocyte function. This novel spheroid-hydrogel platform offers a transformative approach to hepatotoxicity assessment, providing increased sensitivity, improved prediction, and a more physiologically relevant environment. The use of such advanced in vitro models can accelerate drug development, reduce animal testing, and contribute to improved patient safety and clinical outcomes.

Enhanced Vascular-like Network Formation of Encapsulated HUVECs and ADSCs Coculture in Growth Factors Conjugated GelMA Hydrogels

Tissue engineering primarily aimed to alleviate the insufficiency of organ donations worldwide. Nonetheless, the survival of the engineered tissue is often compromised due to the complexity of the natural organ architectures, especially the vascular system inside the organ, which allows food-waste transfer. Thus, vascularization within the engineered tissue is of paramount importance. A critical aspect of this endeavor is the ability to replicate the intricacies of the extracellular matrix and promote the formation of functional vascular networks within engineered constructs. In this study, human adipose-derived stem cells (hADSCs) and human umbilical vein endothelial cells (HUVECs) were cocultured in different types of gelatin methacrylate (GelMA). In brief, pro-angiogenic signaling growth factors (GFs), vascular endothelial growth factor (VEGF165) and basic fibroblast growth factor (bFGF), were conjugated onto GelMA via an EDC/NHS coupling reaction. The GelMA hydrogels conjugated with VEGF165 (GelMA@VEGF165) and bFGF (GelMA@bFGF) showed marginal changes in the chemical and physical characteristics of the GelMA hydrogels. Moreover, the conjugation of these growth factors demonstrated improved cell viability and cell proliferation within the hydrogel construct. Additionally, vascular-like network formation was observed predominantly on GelMA@GrowthFactor (GelMA@GF) hydrogels, particularly on GelMA@bFGF. This study suggests that growth factor-conjugated GelMA hydrogels would be a promising biomaterial for 3D vascular tissue engineering.

Axon-like aligned conductive CNT/GelMA hydrogel fibers combined with electrical stimulation for spinal cord injury recovery

Rehabilitation and regenerative medicine are two promising approaches for spinal cord injury (SCI) recovery, but their combination has been limited. Conductive biomaterials could bridge regenerative scaffolds with electrical stimulation by inducing axon regeneration and supporting physiological electrical signal transmission. Here, we developed aligned conductive hydrogel fibers by incorporating carbon nanotubes (CNTs) into methacrylate acylated gelatin (GelMA) hydrogel via rotating liquid bath electrospinning. The electrospun CNT/GelMA hydrogel fibers mimicked the micro-scale aligned structure, conductivity, and soft mechanical properties of neural axons. For in vitro studies, CNT/GelMA hydrogel fibers supported PC12 cell proliferation and aligned adhesion, which was enhanced by electrical stimulation (ES). Similarly, the combination of aligned CNT/GelMA hydrogel fibers and ES promoted neuronal differentiation and axon-like neurite sprouting in neural stem cells (NSCs). Furthermore, CNT/GelMA hydrogel fibers were transplanted into a T9 transection rat spinal cord injury model for in vivo studies. The results showed that the incorporating CNTs could remain at the injury site with the GelMA fibers biodegraded and improve the conductivity of regenerative tissue. The aligned structure of the hydrogel could induce the neural fibers regeneration, and the ES enhanced the remyelination and axonal regeneration. Behavioral assessments and electrophysiological results suggest that the combination of aligned CNT/GelMA hydrogel fibers and ES could significantly restore motor function in rats. This study demonstrates that conductive aligned CNT/GelMA hydrogel fibers can not only induce neural regeneration as a scaffold but also support ESto promote spinal cord injury recovery. The conductive hydrogel fibers enable merging regenerative medicine and rehabilitation, showing great potential for satisfactory locomotor recovery after SCI.

Fabrication and Characterization of an Enzyme-Triggered, Therapeutic-Releasing Hydrogel Bandage Contact Lens Material

PURPOSE

The purpose of this study was to develop an enzyme-triggered, therapeutic-releasing bandage contact lens material using a unique gelatin methacrylate formulation (GelMA+).

METHODS

Two GelMA+ formulations, 20% w/v, and 30% w/v concentrations, were prepared through UV polymerization. The physical properties of the material, including porosity, tensile strain, and swelling ratio, were characterized. The enzymatic degradation of the material was assessed in the presence of matrix metalloproteinase-9 (MMP-9) at concentrations ranging from 0 to 300 µg/mL. Cell viability, cell growth, and cytotoxicity on the GelMA+ gels were evaluated using the AlamarBlueTM assay and the LIVE/DEADTM Viability/Cytotoxicity kit staining with immortalized human corneal epithelial cells over 5 days. For drug release analysis, the 30% w/v gels were loaded with 3 µg of bovine lactoferrin (BLF) as a model drug, and its release was examined over 5 days under various MMP-9 concentrations.

RESULTS

The 30% w/v GelMA+ demonstrated higher crosslinking density, increased tensile strength, smaller pore size, and lower swelling ratio (p < 0.05). In contrast, the 20% w/v GelMA+ degraded at a significantly faster rate (p < 0.001), reaching almost complete degradation within 48 h in the presence of 300 µg/mL of MMP-9. No signs of cytotoxic effects were observed in the live/dead staining assay for either concentration after 5 days. However, the 30% w/v GelMA+ exhibited significantly higher cell viability (p < 0.05). The 30% w/v GelMA+ demonstrated sustained release of the BLF over 5 days. The release rate of BLF increased significantly with higher concentrations of MMP-9 (p < 0.001), corresponding to the degradation rate of the gels.

DISCUSSION

The release of BLF from GelMA+ gels was driven by a combination of diffusion and degradation of the material by MMP-9 enzymes. This work demonstrated that a GelMA+-based material that releases a therapeutic agent can be triggered by enzymes found in the tear fluid.

Fibrous hydrogels by electrospinning: Novel platforms for biomedical applications

Hydrogels, hydrophilic and biocompatible polymeric networks, have been used for numerous biomedical applications because they have exhibited abilities to mimic features of extracellular matrix (ECM). In particular, the hydrogels engineered with electrospinning techniques have shown great performances in biomedical applications. Electrospinning techniques are to generate polymeric micro/nanofibers that can mimic geometries of natural ECM by drawing micro/nanofibers from polymer precursors with electrical forces, followed by structural stabilization of them. By exploiting the electrospinning techniques, the fibrous hydrogels have been fabricated and utilized as 2D/3D cell culture platforms, implantable scaffolds, and wound dressings. In addition, some hydrogels that respond to external stimuli have been used to develop biosensors. For comprehensive understanding, this review covers electrospinning processes, hydrogel precursors used for electrospinning, characteristics of fibrous hydrogels and specific biomedical applications of electrospun fibrous hydrogels and highlight their potential to promote use in biomedical applications.

Towards spatially-organized organs-on-chip: Photopatterning cell-laden thiol-ene and methacryloyl hydrogels in a microfluidic device

Micropatterning techniques for 3D cell cultures enable the recreation of tissue-level structures, but the combination of patterned hydrogels with organs-on-chip to generate organized 3D cultures under microfluidic perfusion remains challenging. To address this technological gap, we developed a user-friendly in-situ micropatterning protocol that integrates photolithography of crosslinkable, cell-laden hydrogels with a simple microfluidic housing, and tested the impact of crosslinking chemistry on stability and spatial resolution. Working with gelatin functionalized with photo-crosslinkable moieties, we found that inclusion of cells at high densities (≥ 107/mL) did not impede thiol-norbornene gelation, but decreased the storage moduli of methacryloyl hydrogels. Hydrogel composition and light dose were selected to match the storage moduli of soft tissues. To generate the desired pattern on-chip, the cell-laden precursor solution was flowed into a microfluidic chamber and exposed to 405 nm light through a photomask. The on-chip 3D cultures were self-standing and the designs were interchangeable by simply swapping out the photomask. Thiol-ene hydrogels yielded highly accurate feature sizes from 100 - 900 μm in diameter, whereas methacryloyl hydrogels yielded slightly enlarged features. Furthermore, only thiol-ene hydrogels were mechanically stable under perfusion overnight. Repeated patterning readily generated multi-region cultures, either separately or adjacent, including non-linear boundaries that are challenging to obtain on-chip. As a proof-of-principle, primary human T cells were patterned on-chip with high regional specificity. Viability remained high (> 85%) after 12-hr culture with constant perfusion. We envision that this technology will enable researchers to pattern 3D co-cultures to mimic organ-like structures that were previously difficult to obtain.

Cholate Conjugated Cationic Polymers for Regulation of Actin Dynamics

Cytoskeletal movement is a compulsory necessity for proper cell functioning and is largely controlled by actin filament dynamics. The actin dynamics can be finetuned by various natural and artificial materials...

Spatiotemporally Controlled Photoresponsive Hydrogels: Design and Predictive Modeling from Processing through Application

Photoresponsive hydrogels (PRHs) are soft materials whose mechanical and chemical properties can be tuned spatially and temporally with relative ease. Both photo-crosslinkable and photodegradable hydrogels find utility in a range of biomedical applications that require tissue-like properties or programmable responses. Progress in engineering with PRHs is facilitated by the development of theoretical tools that enable optimization of their photochemistry, polymer matrices, nanofillers, and architecture. This review brings together models and design principles that enable key applications of PRHs in tissue engineering, drug delivery, and soft robotics, and highlights ongoing challenges in both modeling and application.

Hydrogel scaffolds for tissue engineering: the importance of polymer choice

We explore the design and synthesis of hydrogel scaffolds for tissue engineering from the perspective of the underlying polymer chemistry. The key polymers, properties and architectures used, and their effect on tissue growth are discussed.

Gelatin interpenetration in poly N-isopropylacrylamide network reduces the compressive modulus of the scaffold: A property employed to mimic hepatic matrix stiffness

The progression of liver disease from normal to cirrhotic state is characterized by modulation of the stiffness of the extracellular matrix (ECM). Mimicking this modulation in vitro scaffold could provide a better insight into hepatic cell behavior. In this study, interpenetrating poly(N-isopropylacrylamide-co-gelatin) cryogels were synthesized in 48 different compositions to yield scaffolds of different properties. It was observed that a high concentration of N-isopropylacrylamide (NIPAAm) leads to the formation of small pores while gelatin interpenetration on poly-NIPAAm framework renders porous structure. Swelling properties and porosity of the gels decreased with an increase in NIPAAm concentration owing to the increased compactness of the gels. Gelatin interpenetration relaxed the gels and enhanced these properties. An increase in gelatin concentration led to a reduction in compressive moduli indicating that gelatin interpenetration in the poly-NIPAAm network softens the cryogel. With the increase in NIPAAm concentration, the effect of gelatin interpenetration in reducing the compressive moduli expanded. The cytocompatibility studies indicated that the gels are cell-adherent and compatible with HepG2. Furthermore, biochemical and real-time polymerase chain reaction studies revealed that HepG2 and Huh-7 cells cultured on scaffolds mimicking the ECM stiffness of normal liver (1.5-2.5 kPa) exhibited optimum liver-specific functionalities. Increasing the stiffness to fibrotic (4-9 kPa) and cirrhotic (10-20 kPa) ECM decreases the functionality.

The Effect of Matrix Stiffness of Biomimetic Gelatin Nanofibrous Scaffolds on Human Cardiac Pericyte Behavior

Congenital heart disease (CHD) is the most common and deadly congenital anomaly, accounting for up to 7.5% of all infant deaths. Survival in children born with CHD has improved dramatically over the past several decades (this positive trend being counterbalanced by the fact that more patients develop heart failure). Seminal data indicate an alteration of the extracellular matrix occurs with time in these hearts due to diffuse and abundant interstitial fibrosis. This results in an escalation in the stiffness of the local myocardial microenvironment. However, the influence of matrix stiffness in regulating the function of resident human stromal cells has not been reported. The objective of this study was to determine the impact of scaffold stiffness on the antigenic and functional profile of cardiac pericytes (CPs) isolated from patients with CHD. To this end, we have first manufactured gelatin nanofibrous scaffolds with varying degrees of stiffness using an in situ cross-linking electrospinning technique in a pure water solvent system. We assessed Young's modulus and performed a comprehensive physicochemical characterization of the scaffolds employing scanning electron microscopy and Fourier transform infrared spectroscopy. We next evaluated the changes induced by a different scaffold stiffness on CP morphology, antigenic profile, viability, proliferation, angiocrine activity, and induced differentiation. Results indicate that soft matrixes with a fiber diameter of ∼400 nm increase CP proliferation, secretion of angiopoietin 2, and F-actin stress fiber formation, without affecting the antigenic profile, viability, or differentiation. These data indicate for the first time that human CPs can be functionally influenced by slight changes in matrix stiffness. The study elucidates the importance of mechanical/morphological cues in modulating the behavior of stromal cells isolated from patients with CHD.