One-Step Formation of Microporous Hydrogel Sponges Encapsulating Living Cells by Utilizing Bicontinuous Dispersion of Aqueous Polymer Solutions

3D Printable Gelatin Methacryloyl (GelMA)-Dextran Aqueous Two-Phase System with Tunable Pores Structure and Size Enables Physiological Behavior of Embedded Cells In Vitro

The restricted porosity of most hydrogels established for in vitro 3D tissue engineering applications limits embedded cells with regard to their physiological spreading, proliferation, and migration behavior. To overcome these confines, porous hydrogels derived from aqueous two-phase systems (ATPS) are an interesting alternative. However, while developing hydrogels with trapped pores is widespread, the design of bicontinuous hydrogels is still challenging. Herein, an ATPS consisting of photo-crosslinkable gelatin methacryloyl (GelMA) and dextran is presented. The phase behavior, monophasic or biphasic, is tuned via the pH and dextran concentration. This, in turn, allows the formation of hydrogels with three distinct microstructures: homogenous nonporous, regular disconnected-pores, and bicontinuous with interconnected-pores. The pore size of the latter two hydrogels can be tuned from ≈4 to 100 µm. Cytocompatibility of the generated ATPS hydrogels is confirmed by testing the viability of stromal and tumor cells. Their distribution and growth pattern are cell-type specific but are also strongly defined by the microstructure of the hydrogel. Finally, it is demonstrated that the unique porous structure is sustained when processing the bicontinuous system by inkjet and microextrusion techniques. The proposed ATPS hydrogels hold great potential for 3D tissue engineering applications due to their unique tunable interconnected porosity.

Sequence-Encoded Differences in Phase Separation Enable Formation of Resilin-like Polypeptide-Based Microstructured Hydrogels

Microstructured hydrogels are promising platforms to mimic structural and compositional heterogeneities of the native extracellular matrix (ECM). The current state-of-the-art soft matter patterning techniques for generating ECM mimics can be limited owing to their reliance on specialized equipment and multiple time- and energy-intensive steps. Here, a photocross-linking methodology that traps various morphologies of phase-separated multicomponent formulations of compositionally distinct resilin-like polypeptides (RLPs) is reported. Turbidimetry and quantitative 1H NMR spectroscopy were utilized to investigate the sequence-dependent liquid-liquid phase separation of multicomponent solutions of RLPs. Differences between the intermolecular interactions of two different photocross-linkable RLPs and a phase-separating templating RLP were exploited for producing microstructured hydrogels with tunable control over pore diameters (ranging from 1.5 to 150 μm) and shear storage moduli (ranging from 0.2 to 5 kPa). The culture of human mesenchymal stem cells demonstrated high viability and attachment on microstructured hydrogels, suggesting their potential for developing customizable platforms for regenerative medicine applications.

Predatory bacterial hydrogels for topical treatment of infected wounds

Wound infection is becoming a considerable healthcare crisis due to the abuse of antibiotics and the substantial production of multidrug-resistant bacteria. Seawater immersion wounds usually become a mortal trouble because of the infection of Vibrio vulnificus. Bdellovibrio bacteriovorus, one kind of natural predatory bacteria, is recognized as a promising biological therapy against intractable bacteria. Here, we prepared a B. bacteriovorus-loaded polyvinyl alcohol/alginate hydrogel for the topical treatment of the seawater immersion wounds infected by V. vulnificus. The B. bacteriovorus-loaded hydrogel (BG) owned highly microporous structures with the mean pore size of 90 μm, improving the rapid release of B. bacteriovorus from BG when contacting the aqueous surroundings. BG showed high biosafety with no L929 cell toxicity or hemolysis. More importantly, BG exhibited excellent in vitro anti-V. vulnificus effect. The highly effective infected wound treatment effect of BG was evaluated on mouse models, revealing significant reduction of local V. vulnificus, accelerated wound contraction, and alleviated inflammation. Besides the high bacterial inhibition of BG, BG remarkably reduced inflammatory response, promoted collagen deposition, neovascularization and re-epithelization, contributing to wound healing. BG is a promising topical biological formulation against infected wounds.

Sponge-Like Macroporous Hydrogel with Antibacterial and ROS Scavenging Capabilities for Diabetic Wound Regeneration

Hydrogels with soft and wet properties have been intensively investigated for chronic disease tissue repair. Nevertheless, tissue engineering hydrogels containing high water content are often simultaneously suffered from low porous size and low water-resistant capacities, leading to undesirable surgery outcomes. Here, a novel sponge-like macro-porous hydrogel (SM-hydrogel) with stable macro-porous structures and anti-swelling performances is developed via a facile, fast yet robust approach induced by Ti₃ C₂ MXene additives. The MXene-induced SM-hydrogels (80% water content) with 200-300 µm open macropores, demonstrating ideal mass/nutrient infiltration capability at ≈20-fold higher water/blood-transport velocity over that of the nonporous hydrogels. Moreover, the highly strong interactions between MXene and polymer chains endow the SM-hydrogels with excellent anti-swelling capability, promising equilibrium SM-hydrogels with identical macro-porous structures and toughened mechanical performances. The SM-hydrogel with versatile functions such as facilitating mass transport, antibacterial (bacterial viability in (Acrylic acid-co-Methacrylamide dopamine) copolymer-Ti₃ C₂ MXene below 25%), and reactive oxygen species scavenging capacities (96% scavenging ratio at 120 min) synergistically promotes diabetic wound healing (compared with non-porous hydrogels the wound closure rate increased from 39% to 81% within 7 days). Therefore, the durable SM-hydrogels exhibit connective macro-porous structures and bears versatile functions induced by MXene, demonstrating its great potential for wound tissue engineering.

Colloidal multiscale porous adhesive (bio)inks facilitate scaffold integration

Poor cellular spreading, proliferation, and infiltration, due to the dense biomaterial networks, have limited the success of most thick hydrogel-based scaffolds for tissue regeneration. Here, inspired by whipped cream production widely used in pastries, hydrogel-based foam bioinks are developed for bioprinting of scaffolds. Upon cross-linking, a multiscale and interconnected porous structure, with pores ranging from few to several hundreds of micrometers, is formed within the printed constructs. The effect of the process parameters on the pore size distribution and mechanical and rheological properties of the bioinks is determined. The developed foam bioinks can be easily printed using both conventional and custom-built handheld bioprinters. In addition, the foam inks are adhesive upon in situ cross-linking and are biocompatible. The subcutaneous implantation of scaffolds formed from the engineered foam bioinks showed their rapid integration and vascularization in comparison with their non-porous hydrogel counterparts. In addition, in vivo application of the foam bioink into the non-healing muscle defect of a murine model of volumetric muscle loss resulted in a significant functional recovery and higher muscle forces at 8 weeks post injury compared with non-treated controls.

Leachable-Free Fabrication of Hydrogel Foams Enabling Homogeneous Viability of Encapsulated Cells in Large-Volume Constructs

The popularity of cell-laden injectable hydrogels has steeply increased due to their compatibility with minimally invasive surgical procedures. However, the diffusion of indispensable molecules for cell survival through bulk hydrogel structures, particularly oxygen, is often limited to micrometric distances, often hampering cell viability or uniform tissue formation in constructs with clinically relevant sizes. The introduction of micropores in hydrogels or the use of oxygen-generating materials has enabled combining advantages of porous 3D scaffolds with the injectability properties of in situ-solidifying hydrogels. Here, cell-laden injectable gelatin methacryloyl (GelMA) foams are fabricated using a single polymer formulation. Air bubbles are introduced into GelMA solutions using a simple-to-implement method based on pulling/pushing the solution through a syringe. Human mesenchymal stem cells derived from the adipose tissue (hASCs) cultured in bulk hydrogels (diameter c.a. 5 mm) show low permanence in the core of the materials and stain for factors associated to hypoxia (hypoxia-inducible factor-1 alpha (HIF-1α)) after 7 days of culture. In opposition, cells cultured in optimized foams do not stain for HIF-1α, show high permanence, homogeneous viability, and consistent phenotype in the whole depth of the biomaterials, while secreting increased amounts of regenerative growth factors to the surrounding medium.

Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications

This review summarizes recent advances of aqueous two-phase systems (ATPSs), particularly their interfaces, with a focus on biomedical applications.