Seed Power: Natural Seed and Electrospun Poly(vinyl difluoride) (PVDF) Nanofiber Based Triboelectric Nanogenerators with High Output Power Density

Harnessing Green Electricity from Food: A Split Black Gram-Based Triboelectric Nanogenerator for a Self-Powered Autonomous Lighting System and Portable Electronics

Triboelectric nanogenerators (TENGs) represent a promising solution to mounting environmental concerns associated with battery disposal amid the escalating demand for portable electronics. However, prevailing TENG fabrication predominantly relies on nonbiodegradable, nonbiocompatible, and synthetic materials, posing a grave ecological threat. To mitigate this, there is a pressing need to develop eco-friendly and green TENGs leveraging sustainable, naturally occurring materials. This study pioneers the use of split black gram (SBG) as a tribo-positive material for TENGs. SBG's effectiveness as a tribo-positive material stems from its abundance of oxygen-containing functional groups, as confirmed by FTIR analysis, facilitating electron donation during the triboelectric process. SBG offers compelling advantages, including widespread availability, cost-effectiveness, biodegradability, and hydrophobic and adhesive properties due to its richness in starch and protein, positioning it as an optimal choice for eco-conscious TENG manufacturing. The fabrication process of an SBG-TENG is not only economical and facile but also solvent-free, requiring no specialized tools. Demonstrating commendable performance, the SBG-TENG achieves a maximum power density of 15.36 μW/cm2 at 1 MΩ, with an open circuit voltage of 84 V and short circuit current of 28 μA, comparable to recent studies. In practical applications, the SBG-TENG seamlessly integrates with LEDs and portable electronic devices via a full bridge rectifier, successfully powering them postcapacitor charging. Moreover, an autonomous lighting system is developed by embedding the SBG-TENG in a foot mat, enabling wireless light control through human stepping on the mat, introducing power-saving functionality for residential and office environments. In essence, the introduction of the SBG-TENG not only delivers cost-effectiveness but also minimizes the environmental impact by harnessing sustainable energy from food sources.

Mechanically Robust and Electrically Stable High-Performance Triboelectric Nanogenerator Based on Fluffy-Free EC/Nylon-11 and PTFE/PVDF Nanofibers

Electrospun nanofiber (NF)-based triboelectric nanogenerators (TENGs) have attracted significant attention in recent years due to their high specific surface area, flexibility, and facile fabrication. However, these TENGs' triboelectric (TE) layers composed of electrospun NFs fail easily due to the poor mechanical properties and fluffy characteristics of the NFs. Herein, electropositive and electronegative TE layers based on ethylcellulose-coated nylon-11 (EC/nylon-11) NFs and polytetrafluoroethylene-coated poly(vinylidene fluoride) (PTFE/PVDF) NFs are prepared via electrospinning and postcoating processes. The obtained EC/nylon-11 and PTFE/PVDF NFs are fluffy-free and exhibit 12.26 and 20.33-fold enhancements of Young's modulus compared with those of pure nylon-11 and PVDF NFs, respectively. The optimized TENG exhibits not only superior performance, including an open-circuit voltage (VOC) of 212 V, a short-circuit current (ISC) of 18.5 μA, and a maximum power density of 1.76 W/m2 but also excellent electrical durability for over 100,000 cycles. The TENG's capability is further demonstrated by continuously driving electronics for over 5 min and by being integrated into a self-powered sensor array of electric skin to detect different in vitro stimuli. This work provides an effective approach to obtaining mechanically robust and electrically stable NF-based high-performance TENGs, which may have potential applications in durable, wearable, and self-powered nanoelectronics.

Highly stretchable hydroxyapatite bionanocomposite for high-performance triboelectric nanogenerators

Renewable energy has been a focus in recent years. Triboelectric nanogenerators (TENGs) have potential for converting mechanical energy into electricity. However, there are restrictions on the use of biological materials and bionanocomposites, such as the high cost and complexity of the synthesis process, poor stability, and inadequate output performance. To overcome the constraints of TENGs, we have turned to hydroxyapatite, a biological substance with great biocompatibility and high mechanical strength that can be manufactured from waste materials. We successfully developed a negative triboelectric bionanocomposite hydroxyapatite (HA) loaded polydimethylsiloxane (PDMS) to harness energy from biomechanical sources such as wearable devices. A TENG (2 × 2 cm2) with a pushing force of 2 N and different amounts of HA in PDMS can produce highly stable output voltage, current, surface charge density, and power density values of 300 V, 22.4 μA, 90.36 μC m-2, and 27.34 W m-2, which are 6, 9, and 10 times higher than those without HA, respectively. These improvements were attributed to the highest observed surface potential of 1512 mV. After 20 000 cycles of contact-separation, the HA/PDMS-TENG shows exceptionally stable performance. Furthermore, adding HA improves the mechanical properties and the stretchability of the bionanocomposite. The HA/PDMS bionanocomposite exhibits remarkable stretchability of more than 290%. Effectively harvesting energy from body movements, the TENG gadget may be used to charge multiple commercial capacitors, drive up to 100 LEDs, and power a low-power electronic device. Self-powered sensing and wearable devices are made possible by the HA/PDMS-TENG, which allows their large-scale preparation and deployment.

Electrochemical Energy Harvesting Using Microbial Active Matter

With the continuous growth in world population and economy, the global energy demand is increasing rapidly. Given that non-renewable energy sources will eventually deplete, there is increasing need for clean, alternative renewable energy sources, which will be inexpensive and involve minimum risk of environmental pollution. In this paper, harnessing the activity of cupric reductase NDH-2 enzyme present in Escherichia coli bacterial cells, we demonstrate a simple and efficient energy harvesting strategy within an electrochemical chamber without the requirement of any external fuels or force fields. The transduction of energy has been demonstrated with various strains of E. coli, indicating that this strategy could, in principle, be applicable for other microbial catalytic systems. We offer a simple mechanism of the energy transduction process considering the bacterial enzyme-mediated redox reaction occurring over the working electrode of the electrochemical cell. Also, the amount of energy generated has been found to be depending on the motility of bacteria within the experimental chamber, suggesting possible opportunities for developing microbial motility-controlled small scale power generators. Finally, we show that the Faradaic electrochemical energy harvested is large enough to power a commercial light emitting diode connected to an amplifier circuit. We expect the present study to generate sufficient interest within soft condensed matter and biophysics communities, and offer useful platforms for controlled energy generation at the small scales.

High-Performance Triboelectric Nanogenerators Based on Commercial Textiles: Electrospun Nylon 66 Nanofibers on Silk and PVDF on Polyester

A high-performance textile triboelectric nanogenerator is developed based on the common commercial fabrics silk and polyester (PET). Electrospun nylon 66 nanofibers were used to boost the tribo-positive performance of silk, and a poly(vinylidene difluoride) (PVDF) coating was deployed to increase the tribo-negativity of PET. The modifications confer a very significant boost in performance: output voltage and short-circuit current density increased ∼17 times (5.85 to 100 V) and ∼16 times (1.6 to 24.5 mA/m2), respectively, compared with the Silk/PET baseline. The maximum power density was 280 mW/m2 at a 4 MΩ resistance. The performance boost likely results from enhancing the tribo-positivity (and tribo-negativity) of the contact layers and from increased contact area facilitated by the electrospun nanofibers. Excellent stability and durability were demonstrated: the nylon nanofibers and PVDF coating provide high output, while the silk and PET substrate fabrics confer strength and flexibility. Rapid capacitor charging rates of 0.045 V/s (2 μF), 0.031 V/s (10 μF), and 0.011 V/s (22 μF) were demonstrated. Advantages include high output, a fully textile structure with excellent flexibility, and construction based on cost-effective commercial fabrics. The device is ideal as a power source for wearable electronic devices, and the approach can easily be deployed for other textiles.

Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃ P]₃ [Bi₂ Br₉ ] (MTPBB) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm^-2 . Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃ ) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm^-2 at an optimal load of 4 MΩ. Moreover, the potential of MTPBB-based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.

Effect of dehydrofluorination reaction on structure and properties of PVDF electrospun fibers

Piezoelectric nanosensors were prepared with a novel type of dehydrofluorinated poly(vinylidene fluoride) (PVDF) nanofibrous membrane. With the synergistic effect of the dehydrofluorination reaction and applied high voltage electric field, the piezoelectric and energy storage properties of fibrous membranes attained great improvement. It was found that the simultaneous introduction of conjugated double bonds to the backbone of PVDF which was accompanied with the elimination of HF, resulted in the decrease of its molecular weight, solution viscosity and hydrophobicity. The crystalline phase, diameter, piezoelectric and energy storage properties of electro-spun PVDF nanofiber membranes significantly depend on the degree of HF elimination in dehydrofluorinated PVDF. The dehydrofluorinated PVDF with 5 hours of reaction exhibits the highest discharged energy density (W_rec) and energy storage efficiency (η), but excessive dehydrofluorination reaction is unfavorable to the energy storage properties. In addition, the dehydrofluorinated PVDF fiber membrane-based nanosensor possesses a larger electrical throughput (open circuit voltage of 30 V, which is three time that of the untreated PVDF), indicating that the introduction of double bonds can also improve the piezoelectric properties of PVDF nanofibers.

A piezoelectric nanosensor was prepared with a novel type of dehydrofluorinated poly(vinylidene fluoride) (PVDF) nanofibrous membrane.