Portable Hg2+ Nanosensor with ppt Level Sensitivity Using Nanozyme as the Recognition Unit, Enrichment Carrier, and Signal Amplifier

A colorimetric and electrochemical dual-mode system for identifying and detecting varied Cr species based on fungus-like porous CoS nanosensor

The differentiation of valence states plays a crucial role in determining the toxicity of chromium (Cr) in environmental samples. In this work, two modes of colorimetric and electrochemical analytical methods based on a fungus like porous CoS (FP CoS) nanosensor were developed for rapid, specific, and portable detection trace/ultra-trace chromium species (Cr(VI) and Cr(III)). The FP CoS exhibited peroxidase activity as a nanozyme for the colorimetric detection of Cr(VI), catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue oxidation product (oxTMB) in the presence of Cr(VI) instead of unstable H2O2 as an oxidizer at room temperature over existing methods. Based on the promotion of colorimetric reaction by increasing in Cr(VI) concentration, an effective colorimetric detection of Cr(VI) method was established with a detection limit (LOD) low to 3.93 μg L-1 and unique selectivity for Cr(VI) over 21 interfering ions (containing 15 metal ions and 6 anions). Innovatively, Cr(VI) could be reduced to Cr(III) without TMB, then selectively enriched by redox reaction with FP CoS. Hence, Cr (III) can be selectively and effectively enriched by FP CoS applying voltage, and then detected using cyclic voltammetry, with a lower LOD of 0.116 μg L-1 and high sensitivity ignoring background interferences. By integrating the dual-mode detection channel, the FP CoS nanosensor offers a convenient and flexible method for simultaneously determining Cr(VI), Cr(III), and total chromium in diverse samples.

A signal amplifying MOF-based probe:on-site and ultrasensitive dual-channel portable detection of Hg2+ in groundwater through a fluorimetrically and RGB-based sensing assay

Mercury (II) ions (Hg2+) are a significant source of heavy metal contamination in groundwater, posing a serious threat to human health and the environment. Therefore, there is an urgent need for the development of a new detection technique with high sensitivity for monitoring Hg2+ in contaminated groundwater. Here, we developed a signal amplifying MOF-based probe (NXS@ZIF-8) for on-site and ultrasensitive dual-channel portable detection of Hg2+ in groundwater. The successful grafting of the fluorescent probe (NXS) onto ZIF-8 effectively enhanced the enrichment of the NXS probe, thereby amplifying the detection signal for Hg2+. Upon exposure to Hg2+, NXS@ZIF-8 quickly emits fluorescent signals, which can be easily detected using portable laser-induced fluorescence spectrometers (LIFs) with a low detection limit of 0.30 ppb. Importantly, the platform enables on-site detection of Hg2+ in groundwater samples and direct on-site and in-situ detection of Hg2+ in contaminated groundwater, achieving acceptable results. Furthermore, NXS@ZIF-8 was fabricated as a paper-based sensor and integrated into a portable smartphone device for visual detection of Hg2+ in contaminated groundwater. This work presents an approach for on-site, in-situ and highly sensitive portable detection of heavy metals in contaminated groundwater, eliminating the need for access to specialized laboratory equipment.

Detection of Hg2+ Using a Dual-Mode Biosensing Probe Constructed Using Ratiometric Fluorescent Copper Nanoclusters@Zirconia Metal-Organic Framework/N-Methyl Mesoporphyrin IX and Colorimetry G-Quadruplex/Hemin Peroxidase-Mimicking G-Quadruplex DNAzyme

Mercury (Hg2+) has been recognized as a global pollutant with a toxic, mobile, and persistent nature. It adversely affects the ecosystem and human health. Already developed biosensors for Hg2+ detection majorly suffer from poor sensitivity and specificity. Herein, a colorimetric/fluorimetric dual-mode sensing approach is designed for the quantitative detection of Hg2+. This novel sensing approach utilizes nanofluorophores, i.e., fluorescent copper nanoclusters-doped zirconia metal-organic framework (CuNCs@Zr-MOF) nanoconjugate (blue color) and N-methyl mesoporphyrin IX (NMM) (red color) in combination with peroxidase-mimicking G-quadruplex DNAzyme (PMDNAzyme). In the presence of Hg2+, dabcyl conjugated complementary DNA with T-T mismatches form the stable duplex with the CuNCs@Zr-MOF@G-quadruplex structure through T-Hg2+-T base pairing. It causes the quenching of fluorescence of CuNCs@Zr-MOF (463 nm) due to the Förster resonance energy transfer (FRET) system. Moreover, the G-quadruplex (G4) structure of the aptamer enhances the fluorescence emission of NMM (610 nm). Besides this, the peroxidase-like activity of G4/hemin DNAzyme offers the colorimetric detection of Hg2+. The formation of duplex with PMDNAzyme increases the catalytic activity. This novel biosensing probe quantitatively detected Hg2+ using both fluorimetry and colorimetry approaches with a low detection limit of 0.59 and 36.3 nM, respectively. It was also observed that the presence of interfering metal ions in case of real aqueous samples does not affect the performance of this novel biosensing probe. These findings confirm the considerable potential of the proposed biosensing probe to screen the concentration of Hg2+ in aquatic products.

Captivating nano sensors for mercury detection: a promising approach for monitoring of toxic mercury in environmental samples

Mercury, a widespread highly toxic environmental pollutant, poses significant risks to both human health and ecosystems. It commonly infiltrates the food chain, particularly through fish, and water resources via multiple pathways, leading to adverse impacts on human health and the environment. To monitor and keep track of mercury ion levels various methods traditionally have been employed. However, conventional detection techniques are often hindered by limitations. In response to challenges, nano-sensors, capitalizing on the distinctive properties of nanomaterials, emerge as a promising solution. This comprehensive review provides insight into the extensive spectrum of nano-sensor development for mercury detection. It encompasses various types of nanomaterials such as silver, gold, silica, magnetic, quantum dot, carbon dot, and electrochemical variants, elucidating their sensing mechanisms and fabrication. The aim of this review is to offer an in-depth exploration to researchers, technologists, and the scientific community, and understanding of the evolving landscape in nano-sensor development for mercury sensing. Ultimately, this review aims to encourage innovation in the pursuit of efficient and reliable solutions for mercury detection, thereby contributing to advancements in environmental protection and public health.

Electrochemiluminescence Sensor Based on CeO2 Nanocrystalline for Hg2+ Detection in Environmental Samples

The excessive concentration of heavy-metal mercury ions (Hg2+) in the environment seriously affects the ecological environment and even threatens human health. Therefore, it is necessary to develop rapid and low-cost determination methods to achieve trace detection of Hg2+. In this paper, an Electrochemiluminescence (ECL) sensing platform using a functionalized rare-earth material (cerium oxide, CeO2) as the luminescent unit and an aptamer as a capture unit was designed and constructed. Using the specific asymmetric matching between Hg2+ and thymine (T) base pairs in the deoxyribonucleic acid (DNA) single strand, the "T-Hg-T" structure was formed to change the ECL signal, leading to a direct and sensitive response to Hg2+. The results show a good linear relationship between the concentration and the response signal within the range of 10 pM-100 µM for Hg2+, with a detection limit as low as 0.35 pM. In addition, the ECL probe exhibits a stable ECL performance and excellent specificity for identifying target Hg2+. It was then successfully used for spiked recovery tests of actual samples in the environment. The analytical method solves the problem of poor Hg2+ recognition specificity, provides a new idea for the efficient and low-cost detection of heavy-metal pollutant Hg2+ in the environment, and broadens the prospects for the development and application of rare-earth materials.

Calix[4]arene-based Supramolecular Gels for Mercury Ion Removal in Water

A calix[4]arene-based gelator 1, with lower-rim mono triazolylpyridine group, capable of spontaneous self-assembly into microspheres in different ethanol/H2 O mixtures, is synthesized. The concentration-dependent 1 H NMR spectra and X-ray single-crystal structure of 1 provided evidence for self-assembly of gelator 1 via cooperative interactions of intermolecular noncovalent forces. Furthermore, metallogels by self-assembly of 1 was found to exhibit remarkable selectivity toward Hg2+ ions. 1 H NMR spectra support that Hg2+ ion was bound to the nitrogen atoms of two coordination sites of 1, which composed of triazole and pyridine. Moreover, the results of field emission scanning electron microscopy and rheology experiments indicated that Hg2+ ions not only enhanced the gelling ability of gelator 1 in ethanol but also led to morphological change of its self-assembly through metal-ligand interactions. Finally, the in situ gelation, triggered by mixing a gelator solution of 1 in ethanol with water samples such as deionized (DI), tap, and lake water, leads to the effective removal of Hg(II) from a water sample which reduced from 400 to 1.6 ppm.

Integrated Design of a Dual-Mode Colorimetric Sensor Driven by Enzyme-like Activity Regulation Strategy for Ultratrace and Portable Detection of Hg2

Colorimetric analysis for mercury detection has great application potential in the prevention of health damage caused by mercury in the environment. Sensitivity, selectivity, and portability are core competencies of sensors, and concentrating these properties in a single sensor for efficient mercury detection remains a great challenge. Herein, a hollow structure CuS@CuSe@PVP (CCP) was prepared in which the enzyme-like activities could be activated by Hg2+ due to the antagonism between Hg and Se, inspiring the establishment of a colorimetric method for Hg2+ detection. As for Hg2+ detection performance, the linear range (LR) and limit of detection (LOD) were 1-900 and 0.81 nM in the POD-like activity system, respectively. Also, 5-550 nM of LR and 2.34 nM of LOD were achieved in the OD-like activity system. Further, a smartphone-mediated portable RGB nanosensor was fabricated, with a LOD down to 6.65 nM in the POD-like system and 7.97 nM in the OD-like system. Moreover, the excellent self-calibration and satisfactory recovery of 94.77%-106.16% were shown in the application of real water samples analysis. This study represented advanced progress toward emerging applications of nanozymes with multiple enzyme-like activities in heavy metal detection and will accelerate the development of efficient and portable heavy metal sensors.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

Smartphone-Enabled Fluorescence and Colorimetric Platform for the On-Site Detection of Hg2+ and Cl- Based on the Au/Cu/Ti3C2 Nanosheets

Smartphone-assisted fluorescence and colorimetric methods for the on-site detection of Hg²⁺ and Cl^- were established based on the oxidase-like activity of the Au-Hg alloy on the surface of Au/Cu/Ti₃C₂ NSs. The Au nanoparticles (NPs) were constructed via in-situ growth on the surface of Cu/Ti₃C₂ NSs and characterized by different characterization techniques. After the addition of Hg²⁺, the formation of Hg-Au alloys could promote the oxidization of o-phenylenediamine (OPD) to generate a new fluorescence emission peak of 2,3-diaminopenazine (ADP) at 570 nm. Therefore, a turn-on fluorescence method for the detection of Hg²⁺ was established. As the addition of Cl^- can influence the fluorescence of ADP, the fluorescence intensity was constantly quenched to achieve the continuous quantitative detection of Cl^-. Therefore, a turn-off fluorescence method for the detection of Cl^- was established. This method had good linear ranges for the detection of Hg²⁺ and Cl^- in 8.0-200.0 nM and 5.0-350.0 µM, with a detection limit of 0.8 nM and 27 nM, respectively. Depending on the color change with the detection of Hg²⁺ and Cl^-, a convenient on-site colorimetric method for an analysis of Hg²⁺ and Cl^- was achieved by using digital images combined with smartphones (color recognizers). The digital picture sensor could analyze RGB values in concentrations of Hg²⁺ or Cl^- via a smartphone app. In summary, the proposed Au/Cu/Ti₃C₂ NSs-based method provided a novel and more comprehensive application for environmental monitoring.

Colorimetric mercury detection with enhanced sensitivity using magnetic-Au hybrid nanoparticles

Due to the neural toxicity of mercury, there is a need for the development of on-site detection systems for Hg²⁺ monitoring. To this end, a new colorimetric mercury detection probe, Fe₃O₄@SiO₂@Au (magnetic-Au; Mag-Au) hybrid nanoparticles, has been developed. The Au on the surface of Mag-Au is an indicator of Hg²⁺, which forms an AuHg alloy (amalgam) on their surface (Mag-Au@Hg), with excellent peroxidase-like activity. The oxidation of 3,3',5,5'-tetramethylbenzidine by Mag-Au@Hg resulted in a color change of the indicator solution, which was enhanced with increasing Hg²⁺ concentration. Mag-Au can be used to detect Hg²⁺ at nanomolar concentrations. Additionally, magnetic separation can be used to easily purify and concentrate the Mag-Au@Hg from samples, and thus avoid interference from unwanted residues or colored samples. The feasibility of Mag-Au for Hg²⁺ detection was tested with an artificial urine solution and it can be used to detect Hg²⁺ in various real samples, such as river water, seawater, food, and biological samples.

Ultrasensitive fluorescence sensor for Hg2+ in food based on three-dimensional upconversion nanoclusters and aptamer-modulated thymine-Hg2+-thymine strategy

Mercury (Hg²⁺) is a potentially toxic heavy metal ion found to be drastically deleterious to humans. Herein, an ultrasensitive fluorescence sensor was developed using three-dimensional upconversion nanoclusters (EBSUCNPs) and aptamer-modulated thymine-Hg²⁺-thymine strategy. The EBSUCNPs were used as the energy donors, the PDANPs served as the acceptors, and the aptamer was applied as an identification tag for Hg²⁺. Due to the energy transfer effect, the fluorescence of EBSUCNPs can be effectively quenched by Polydopamine nanoparticles (PDANPs). In the existence of Hg²⁺, T (thymine)-rich aptamers between EBSUCNPs and PDANPs were hybridized with Hg²⁺ to yield thymine-Hg²⁺-thymine and folded back to hairpin structure, causing PDANPs to detach from the EBSUCNPS and the recovery of fluorescence. Under optimum conditions, the linear sensing range of Hg²⁺ was 0.5-20 µg/L, and the detection limit was 0.28 µg/L. Furthermore, it exhibited excellent selectivity and anti-interference, which made it an ideal method for identifying Hg²⁺ in spiked samples.

Durable Nanocellulose-Stabilized Emulsions of Dithizone/Chloroform in Water for Hg2+ Detection: A Novel Approach for a Classical Problem

The use of dithizone (DTZ) for colorimetric heavy-metal detection is approximately one century old. However, its pending stability issues and the need for simple indicators justify further research. Using cellulose nanofibers, we attained DTZ-containing emulsions with high stability. These emulsions had water (at least 95 wt %) and acetic acid (1-8 mL/L) conforming the continuous phase, while dispersed droplets of diameter <1 μm contained chloroform-solvated DTZ (3 wt %). The solvation cluster was computed by molecular dynamics simulations, suggesting that chloroform slightly reduces the dihedral angle between the two sides of the thiocarbazone chain. Nanocellulose concentrations over 0.2 wt % sufficed to obtain macroscopically homogeneous mixtures with no phase separation. Furthermore, the rate of degradation of DTZ in the nanocellulose-stabilized emulsion did not differ significantly from a DTZ/chloroform solution, outperforming DTZ/toluene and DTZ/acetonitrile. Not only is the emulsion readily and immediately responsive to mercury(II), but it also decreases interferences from other ions and from natural samples. Unexpectedly, neither lead(II) nor cadmium(II) triggered a visual response at trace concentrations. The limit of detection of these emulsions is 15 μM or 3 mg/L, exceeding WHO limits for mercury(II) in drinking water, but they could be effective at raising alarms.

The influence of substrates addition order on colorimetric assay based on MnO2 nanocubes: A novel turn-off H2O2 assay strategy in water-soak foods

Herein, novel MnO₂ nanocubes were facilely synthesized by manipulating the dosage of KMnO₄ and l-Dopa with the aid of ultrasound. The as-prepared MnO₂ nanocubes exhibited interesting oxidation activity which was influenced by the addition order of substrates (H₂O₂ and 3,3,5,5-tetramethylbenzidine (TMB)). After the mechanism study, we found that H₂O₂ and TMB can be competitively oxidized by MnO₂ nanocubes, which was different from the peroxidase- and oxidase-like activities. According to the discovery, a novel turn-off H₂O₂ assay method based on MnO₂ nanocubes was established, where H₂O₂ was firstly incubated with MnO₂ nanocubes for 3 min and then TMB was added for the instantaneous chromogenic reaction. In addition to the shorter operation time, the colorimetric results were less affected by temperature and unchanged within 30 min without terminating reaction. Moreover, the method showed ultra-high sensitivity with low limit of detection (0.027 μmol L^-1) and acceptable reliability for H₂O₂ assay in water-soak foods.

Application of Nanozymes in Environmental Monitoring, Management, and Protection

Nanozymes are nanomaterials with enzyme-like activity, possessing the unique properties of nanomaterials and natural enzyme-like catalytic functions. Nanozymes are catalytically active, stable, tunable, recyclable, and versatile. Therefore, increasing attention has been paid in the fields of environmental science and life sciences. In this review, we focused on the most recent applications of nanozymes for environmental monitoring, environmental management, and environmental protection. We firstly introduce the tuning catalytic activity of nanozymes according to some crucial factors such as size and shape, composition and doping, and surface coating. Then, the application of nanozymes in environmental fields are introduced in detail. Nanozymes can not only be used to detect inorganic ions, molecules, organics, and foodborne pathogenic bacteria but are also involved in the degradation of phenolic compounds, dyes, and antibiotics. The capability of nanozymes was also reported for assisting air purification, constructing biofuel cells, and application in marine antibacterial fouling removal. Finally, the current challenges and future trends of nanozymes toward environmental fields are proposed and discussed.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Rapid Determination of Mercury Ions in Environmental Water Based on an N-Rich Covalent Organic Framework Potential Sensor

In this article, an N-rich covalent organic framework (COFTFPB-TZT) was successfully synthesized using 4,4′,4′-(1,3,5-triazine-2,4,6-triyl) trianiline (TZT), and 4-[3,5-bis (4-formyl-phenyl) phenyl] benzaldehyde (TFPB). The as-prepared COFTFPB-TZT possesses irregular cotton wool patches with a large specific surface area. A novel selective electrode based on COFTFPB-TZT was used for the determination of Mercury ions. The abundance of N atoms in COFTFPB-TZT provides more coordination sites for Hg2+ adsorption, resulting in a change in the surface membrane potential of the electrode to selectively recognize Hg2+. Under optimal experimental conditions, the ion-selective electrode shows a good potential response to Hg2+, with a linear range of 1.0 × 10−9∼1.0 × 10−4, a Nernst response slope of 30.32 ± 0.2 mV/-PC at 25°C and a detection limit of 4.5 pM. At the same time, the mercury-ion electrode shows a fast response time of 10 s and good reproducibility and stability. The selectivity coefficients for Fe2+, Zn2+, As3+, Cr6+, Cu2+, Cr3+, Al3+, Pb2+, NH4+, Ag+, Ba2+, Mg2+, Na+, and K+ are found to be small, indicating no interference in the detection system. The proposed method can be successfully applied to the determination of Hg2+ in 3 typical environmental water samples, with a recovery rate of 98.6–101.8%. In comparison with the spectrophotometric method utilizing dithizone, the proposed method is simple and fast and holds great potential application prospects in environmental water quality monitoring and other fields.

The ultrathin palladium nanosheets for sensitive and visual Hg2+ detection in the food chain

The detection of mercury, one of the ten most dangerous chemicals, is significant to provide helpful information for assessing mercury toxicity and health risks. However, it is a challenge to explore simple, sensitive, accurate, and cheap Hg²⁺ detection methods. Noble metal nanomaterials are used for Hg²⁺ detection by the colorimetric method widely. Still, the pure noble metal materials' detection limit of Hg²⁺ is high, and sensitivity enhancement usually requires further complex modification. Here, we use a facile one-step route to synthesize ultra-thin two-dimensional palladium nanosheets (PdNS), which have high selectivity and sensitivity for Hg²⁺ detection by colorimetric method with a low detection limit (0.55 ppb). The detection of Hg²⁺ by PdNS involves multiple mechanisms, including the formation of amalgam and PdO to improve the peroxidase-mimic activity of PdNS and PdNS motor function to increase its collision probability with the detection reactant. The PdNS can be used to detect Hg²⁺ in various actual samples. The detection results are highly consistent with the data obtained by the atomic fluorescence spectrometer (AFS). Then, we developed a Hg²⁺ detection kit, which can realize simple, sensitive, and accurate Hg²⁺ detection by naked eye or cellphone at a meager cost (0.3 dollars each sample).

Achieving Ultrasensitive Point-of-Care Assay for Mercury Ions with a Triple-Mode Strategy Based on the Mercury-Triggered Dual-Enzyme Mimetic Activities of Au/WO3 Hierarchical Hollow Nanoflowers

The exploration of new strategies for portable detection of mercury ions with high sensitivity and selectivity is of great value for biochemical and environmental analyses. Herein, a straightforward, convenient, label-free, and portable sensing platform based on a Au nanoparticle (NP)-decorated WO₃ hollow nanoflower was constructed for the sensitive and selective detection of Hg(II) with a pressure, temperature, and colorimetric triple-signal readout. The resulting Au/WO₃ hollow nanoflowers (Au/WO₃ HNFs) could efficaciously impede the aggregation of Au NPs, thus significantly improving their catalytic activity and stability. The sensing mechanism of this new strategy using pressure as a signal readout was based on the mercury-triggered catalase mimetic activity of Au/WO₃ HNFs. In the presence of the model analyte Hg(II), H₂O₂ in the detection system was decomposed to O₂ fleetly, resulting in a detectable pressure signal. Accordingly, the quantification of Hg(II) was facilely realized based on the pressure changes, and the detection limit could reach as low as 0.224 nM. In addition, colorimetric and photothermal detection of Hg(II) using the Au/WO₃ HNFs based on their mercury-stimulated peroxidase mimetic activity was also investigated, and the detection limits were calculated to be 78 nM and 0.22 μM for colorimetric and photothermal methods, respectively. Hence, this nanosensor can even achieve multimode determination of Hg(II) with the concept of point-of-care testing (POCT). Furthermore, the proposed multimode sensing platform also displayed satisfactory sensing performance for the Hg(II) assay in actual water samples. This promising strategy may provide novel insights on the fabrication of a multimode POCT platform for sensitive, selective, and accurate detection of heavy metal ions.

L-Cysteine functionalized graphene oxide nanoarchitectonics: A metal-free Hg2+ nanosensor with peroxidase-like activity boosted by competitive adsorption

Developing non-noble metal, even metal-free chemical sensors for the detection of toxic heavy metal ions is significantly desirable for economically and environmentally sustainable application but has heretofore remained elusive. Herein, a _L-cysteine functionalized graphene oxide nanosheet (CGO) nanoarchitectonics, greenly synthesized by a very simple method at room temperature, was utilized to realize the simultaneous enrichment and colorimetric detection of trace mercury ions (Hg²⁺). It was discovered that CGO, as a nanozyme mimic exhibited greatly enhanced peroxidase-like catalytic activity than the pristine graphene oxide. By exploring the interactions of CGO nanozyme with colorimetric substrate, 3,3',5,5'-tetramethylbenzidine (TMB) and target Hg²⁺ ions, we found that the sensing principle was based mainly on the competitive adsorption between Hg²⁺ ions and TMB over CGO. The pre-capture of Hg²⁺ ions hindered the TMB binding on CGO, resulting in the promoted oxidation of TMB by H₂O₂ to produce more colored oxidation products, from which the colorimetric sensing of Hg²⁺ was realized with a good detection effect on 5 μg L^-1 solution. As an enrichment-sensing integration platform, this metal-free sensor is cost-effective and sensitive, and presents considerable anti-interference ability over other metal ions. Overall, this work not only expands the application of graphene-based materials in colorimetric detection but also provides a general sensing principle to construct highly sensitive sensors.

Au nanoparticle-hydrogel nanozyme-based colorimetric detection for on-site monitoring of mercury in river water

A sensitive on-site mercury sensing platform was developed for simple and effective monitoring of mercury levels in the field. The simple and practical mercury detection system was designed by integrating an Au nanoparticle-PEG hydrogel block nanozyme (Au-HBNz) into a polymer film-based colorimetric device. Upon addition of Hg²⁺ ions, Au-HBNz exhibited excellent peroxidase-like activity, catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine into a blue-colored product, which has a maximum absorbance at 652 nm. The resulting color intensity change was evaluated using a smartphone for simple and rapid Hg²⁺ detection with a broad detection range (0.008-20 μg∙mL^-1) and a linear concentration-response relationship (R² = 0.96). The detection limit (1.10 ng∙mL^-1) was lower than the maximum permissible Hg²⁺ levels in drinking water set by the World Health Organization (6 ng∙mL^-1) and U.S. Environmental Protection Agency (2 ng∙mL^-1). The recoveries of Hg²⁺ determination in river water by spiking Hg²⁺ samples ranged from 92 to 106%, which indicated high validity and applicability of the Hg²⁺ detection system for field measurements. Thus, the developed sensor enables highly selective and efficient real-time monitoring of Hg²⁺.

Copper sulfide nanoclusters with multi-enzyme-like activities and its application in acid phosphatase sensing based on enzymatic cascade reaction

Nanozymes are artificial enzymes, which can substitute natural enzymes for wide range of catalysis-based applications. However, it is challenging to explore novel mimic enzymes or multi-enzyme mimics. Herein we report the facile preparation of uniform CuS nanoclusters (NCs), which possessed outstanding tetra-enzyme mimetic catalytic activities, including peroxidase (POD)-mimics, catalase (CAT)-mimics, ascorbic acid oxidase (AAO)-mimics and superoxide dismutase (SOD)-mimics. The catalytic mechanism of POD-like was coming from the oxygen vacancies of CuS. Furthermore, the steady-state kinetics of POD-, CAT- and AAO mimics of CuS NCs were systematically explored. On basis of the enzymatic cascade reaction that acid phosphatase (ACP) involved in a weak acidic environment, in the presence of O-phenylenediamine, quinoxaline fluorescent substance will be generated. Thus, a fluorescent biosensor platform was proposed for detection of ACP with the linear range of 0.05-25 U L^-1 and limit of detection of 0.01 U L^-1. The as-proposed method was applicable to real serum sample detection accurately and reproducibly. Considering the simple preparation, good stability, excellent multi-enzyme activities and controllable experimental operation, CuS NCs would provide a basis for expanding to other biocatalytic and biomedical applications.

Cobalt metal-organic framework modified carbon cloth/paper hybrid electrochemical button-sensor for nonenzymatic glucose diagnostics

In the growing pandemic, family healthcare is widely concerned with the increase of medical self-diagnosis away from the hospital. A cobalt metal-organic framework modified carbon cloth/paper (Co-MOF/CC/Paper) hybrid button-sensor was developed as a portable, robust, and user-friendly electrochemical analytical chip for nonenzymatic quantitative detection of glucose. Highly integrated electrochemical analytical chip was successfully fabricated with a flexible Co-MOF/CC sensing interface, effectively increasing the specific area and catalytic sites than the traditional plane electrode. Based on the button-sensor, rapid quantitative detection of glucose was achieved in multiple complex bio-matrixes, such as serum, urine, and saliva, with desired selectivity, stability, and durability. With the advantages of low cost, high environment tolerance, ease of production, our nanozyme-based electrochemical analytical chip achieved reliable nonenzymatic electrocatalysis, has great potential for the application of rapid on-site analysis in personalized diagnostic and disease prevention.

A review on metal nanozyme-based sensing of heavy metal ions: Challenges and future perspectives

Large scale mining, manufacturing industries, exploitation of underground water, depletion of groundwater level, and uncontrolled discharge of industrial wastes have caused severe heavy metal ion pollution to the environment throughout the world. Therefore, the rapid detection of such toxic metal ions is inevitable. However, conventional methods require sophisticated instruments and skilled manpower and are difficult to operate in on-field conditions. Recently, metal nanozyme-based assays have been found to have the potential as an alternative to conventional methods due to their portability, simplicity, and high sensitivity to detect metal ion concentration to as low as parts per trillion (ppt). Metal nanozyme-based systems for heavy metal ions enable rapid and cheap screening on the spot with a very simple instrument such as a UV-vis absorption spectrophotometer and therefore, are convenient for use in field operations, especially in remote parts of the world. The sensing mechanism of a nanozyme-based sensor is highly dependent on its surface properties and specific interactions with particular metal ion species. Such method often encounters selectivity issues, unlike natural enzyme-based assays. Therefore, in this review, we mainly focus our discussion on different types of target recognition and inhibition/enhancement mechanisms, and their responses toward the catalytic activity in the sensing of target metal ions, design strategies, challenges, and future perspectives.

Protein-mediated wool-ball-like copper sulfide as a multifunctional nanozyme for dual fluorescence "turn-on" sensors of cysteine and silver ions

Developing a multifunctional nanozyme based biosensor with a convenient approach and high reliability is of vital interest for multiplex detection. In this study, wool-ball-like copper sulfide (WBLCS) was obtained facilely using an amphiphilic protein. The acidic amino acid residues and the amphiphilic properties of protein molecules play cooperative roles in the fabrication of hierarchical nanostructures. Unlike copper sulfide with irregular morphologies, the single component WBLCS acts as a multifunctional nanozyme possessing both superior cysteine oxidase- and peroxidase-mimicking activity. Fascinatingly, the addition of silver ions can significantly enhance the performance of the cascade system at a very low fluorescence substrate concentration. Based on this, dual fluorescence "turn on" sensors of cysteine and silver ions with extremely high sensitivity and selectivity are developed. This is the first report to explore multiple fluorescence "turn on" sensing systems based on one single nanozyme. Hence, the present finding has significant implication towards the design of superstructured nanozymes combining different multi-functionalities at the nanoscale for sensing multiplex target molecules sensitively and selectively in practice.

Nearly Monodisperse Copper Selenide Nanoparticles for Recognition, Enrichment, and Sensing of Mercury Ions

In the current work, Cu(I)_1.28Cu(II)_0.36Se nanoparticles were synthesized via a simple procedure and were applied for the first time for recognition, adsorption, enrichment, and detection of Hg(II) ions. The experimental results show that 99.9% Hg(II) could be adsorbed by Cu(I)_1.28Cu(II)_0.36Se nanoparticles within just 30 s, and the Hg(II) concentration could be lowered down to a super-low level of 0.01 ppb. Cu(I)_1.28Cu(II)_0.36Se nanoparticles also demonstrate high selectivity to Hg(II) and Ag(I) among nine representative metal ions. The enrichment experiments show that Hg(II) of ultratrace concentration could be enriched significantly by Cu(I)_1.28Cu(II)_0.36Se nanoparticles, and thus, the detection limit of Hg(II) based on inductively coupled plasma emission spectroscopy-mass spectrometry would be pushed down by 2 orders of magnitude. These outstanding features of Cu(I)_1.28Cu(II)_0.36Se nanoparticles could be well accounted for in terms of the solubility product principle and the high affinity between selenium and mercury. Cu(I)_1.28Cu(II)_0.36Se nanoparticles were also found to have peroxidase-like activity, which could be inhibited by Hg(II) but not by Ag(I). This unique characteristic coupled with the solubility product principle successfully allows recognition and detection of Hg(II) even in the presence of Ag(I), which has a similar pK_sp to Hg(II). As a result, the qualitative and quantitative analyses of Hg(II) could be performed by the naked eye and UV-visible spectroscopy, respectively. The current results indicate that Cu(I)_1.28Cu(II)_0.36Se nanoparticles not only have great potential in various aspects of dealing with Hg(II) pollution but would also shed light on discovering new nanomaterials to address other heavy metal ions.