Near-Infrared Electron Acceptors with Unfused Architecture for Efficient Organic Solar Cells

Exploring structure-property landscape of non-fullerene acceptors for organic solar cells

We present a comprehensive analysis of the structure-property relationship in small molecule non-fullerene acceptors (NFAs) featuring an acceptor-donor-acceptor configuration employing state-of-the-art quantum chemical computational methods. Our focus lies in the strategic functionalization of halogen groups at the terminal positions of NFAs as an effective means to mitigate non-radiative voltage losses and augment photovoltaic and photophysical properties relevant to organic solar cells. Through photophysical studies, we observe a bathochromic shift in the visible region for all halogen-functionalized NFAs, except type-2, compared to the unmodified compound. Most of these functionalized compounds exhibit exciton binding energies below 0.3 eV and ΔLUMO less than 0.3 eV, indicating their potential as promising candidates for organic solar cells. Selected candidate structures undergo an analysis of charge transport properties using the semi-classical Marcus theory based on hopping transport formalism. Molecular dynamics simulations followed by charge transport simulations reveal an ambipolar nature of charge transport in the investigated NFAs, with equivalent hole and electron mobilities compared to the parent compound. Our findings underscore the crucial role of end-group functionalization in enhancing the photovoltaic and photophysical characteristics of NFAs, ultimately improving the overall performance of organic solar cells. This study advances our understanding of the structure-property relationships in NFAs and provides valuable insights into the design and optimization of organic solar cell materials.

Low-Cost Nonfused-Ring Electron Acceptors Enabled by Noncovalent Conformational Locks

ConspectusSince the first bilayer-structured organic solar cells (OSCs) in 1986, fullerenes and their derivatives have dominated the landscape for two decades due to their unique properties. In recent years, the breakthrough in nonfullerene acceptors (NFAs) was mainly attributed to the development of fused-ring electron acceptors (FREAs), whose photovoltaic performance surpassed that of fullerene derivatives. Through the unremitting efforts of the whole community, the power conversion efficiencies (PCEs) have surpassed 19% in FREA-based OSCs. However, FREAs generally suffered from complex synthetic approaches and high product costs, which hindered large-scale production. Therefore, many researchers are seeking a new type of NFA to achieve cost-effective, highly efficient OSCs.In collaboration with Marks and Facchetti in 2012, Huang et al. (Huang, H. J. Am. Chem. Soc. 2012, 134, 10966-10973, 10.1021/ja303401s) proposed the concept of "noncovalent conformational locks" (NoCLs). In the following years, our group has been focusing on the theoretical and experimental exploration of NoCLs, revealing their fundamental nature, formulating a simple descriptor for quantifying their strength, and employing this approach to achieve high-performance organic/polymeric semiconductors for optoelectronics, such as OSCs, thin-film transistors, room-temperature phosphorescence, and photodetectors. The NoCLs strategy has been proven to be a simple and effective approach for enhancing molecular rigidity and planarity, thus improving the charge transport mobilities of organic/polymeric semiconductors, attributed to reduced reorganization energy and suppressed nonradiative decay.In 2018, Chen et al. (Li, S. Adv. Mater. 2018, 30, 1705208, 10.1002/adma.201705208) reported the first example of nonfused-ring electron acceptors (NFREAs) with intramolecular noncovalent F···H interactions. The NoCLs strategy is essential in NFREAs, as it simplifies the conjugated structures while maintaining high coplanarity comparable to that of FREAs. Due to their simple structures and concise synthesis routes, NFREAs show great potential for achieving cost-effective and highly efficient OSCs. In this Account, we provide an overview of our efforts in developing NFREAs with the NoCLs strategy. We begin with a discussion on the distinct features of NFREAs compared with FREAs, and the structural simplification from FREAs to NFREAs to completely NFREAs. Next, we examine several selected typical examples of NFREAs with remarkable photovoltaic performance, aiming to provide an in-depth exploration of the molecular design principle and structure-property-performance relationships. Then, we discuss how to achieve a balance among efficiency, stability, and cost through a two-in-one strategy of polymerized NFREAs (PNFREAs). Finally, we offer our views on the current challenges and future prospects of NFREAs. We hope this Account will trigger intensive research interest in this field, thus propelling OSCs into a new stage.

The novel non-fully-fused ring small molecule acceptors: End-capped modification investigation

End-capped modification is an efficacious strategy for developing high-performance acceptor materials. In this paper, the experimentally synthesized A-D-A'-D-A type non-fully-fused ring acceptor IDTBT-4F (R) was used as a reference molecule, and five small molecule acceptors for R1-R5 were investigated by changing R's terminal functional groups. By using DFT/B3PW91/6-31G (d,p) method, the ground-state structures of all molecules were studied. The absorption spectra of these acceptors were gained by the TD-DFT/MPW1PW91/6-31G (d,p) approach. Meanwhile, the charge density difference and transition density matrix were analyzed effectively. It can be observed that, compared to the R molecule, all developed molecules exhibited narrower energy gaps, larger absorption wavelengths, more red-shifted absorption spectra, lower excitation energies, higher dipole moment and greater electron-accepting capacity. The strategy of functional group substitution is superior to halogen substitution in improving the aforementioned parameters. Both terminal π-extension and end-group chlorination strategies can synergistically enhance molecular performance. In addition, we also calculated the electron mobility of the dimers constructed by all the molecules, among which R1 and R4 molecules designed with -COOCH3 functional group substitution and R2 molecule with terminal chlorination achieved superior electron mobility compared to R molecule due to their significant electronic coupling. Overall, the study shows that the designed molecules can be highly effective candidates for applications of organic solar cells.

An Ortho-Bisalkyloxylated Benzene-Based Fully Non-fused Electron Acceptor for Efficient Organic Photovoltaic Cells

To develop the low-cost nonfullerene acceptors (NFAs), two fully non-fused NFAs (TBT-2 and TBT-6) with ortho-bis((2-ethylhexyl)oxy)benzene unit and different side chains onto thiophene-bridges are synthesized through highly efficient synthetic procedures. Both acceptors show good planarity, low optical gaps (≈1.51 eV), and deep highest occupied molecular orbital levels (≤-5.77 eV). More importantly, the single-crystal structure of TBT-2 shows compact molecular arrangement due to the existence of intramolecular interactions between adjacent aromatic units and strong π-π stacking between intermolecular terminal groups. When the two acceptors are fabricated organic photovoltaic (OPV) cells by combining with a wide optical gap polymer donor, the TBT-6 with strong crystallization forms large domain sizes in bulk heterojunction (BHJ) blend. As a result, the TBT-6-based OPV cell shows a low power conversion efficiency (PCE) of 9.53%. In contrast, the TBT-2 with proper crystallization facilitates morphological optimization in the BHJ blend. Consequently, the TBT-2-based OPV cell gives an outstanding PCE of 13.25%, which is one of the best values among OPV cells with similar optical gaps. Overall, this work provides a practical molecular design strategy for developing high-performance and low-cost electron acceptors.

Effects of Halogenation on Cyclopentadithiophenevinylene-Based Acceptors with Excellent Responses in Binary Organic Solar Cells

In recent years, non-fused non-fullerene acceptors (NFAs) have attracted increasing consideration due to several advantages, which include simple preparation, superior yield, and low cost. In the work reported here, we designed and synthesized three new NFAs with the same cyclopentadithiophenevinylene (CPDTV) trimer as the electron-donating unit and different terminal units (IC for FG10, IC-4F for FG8, and IC-4Cl for FG6). Both halogenated NFAs, i.e., FG6 and FG8, show red-shifted absorption spectra and higher electron mobilities (more pronounced for FG6) in comparison with FG10. Moreover, the dielectric constants of these materials also increased upon halogenation of the IC terminal units, thus leading to a reduction in the exciton binding energy, which is favorable for dissociation of excitons and subsequent charge transfer despite the driving force (highest occupied molecular orbital and lowest unoccupied molecular orbital offsets) being very small. The organic solar cells (OSCs) constructed using these acceptors and PBDB-T, as the donor, showed PCE values of 15.08, 12.56, and 9.04% for FG6, FG8, and FG10, respectively. The energy loss for the FG6-based device was the lowest (0.45 eV) of all the devices, and this may be attributed to it having the highest dielectric constant, which leads to a reduction in the binding energy of exciton and a small driving force for hole transfer from FG6 to PBDB-T. The results indicate that the NFA containing the CPDTV oligomer core and halogenated terminal units can efficiently spread the absorption spectrum to the NIR zone. Non-fused NFAs have a bright future in the quest to obtain efficient OSCs with low cost for marketable purposes.

Asymmetric non-fullerene acceptors enable high photovoltaic performance via the synergistic effect of carbazole-terminated alkyl spacer and halogen substitution

A novel design approach of asymmetric NFA via synergetic alkyl spacer length and halogen substitution enables high photovoltaic performance.

High-Performance Nonfused Ring Electron Acceptors with V-Shaped Side Chains

Motivated by simplifying the synthesis of nonfullerene acceptor and establishing the relation between molecular structure and photovoltaic performance, two isomeric nonfused ring electron acceptors (o-TT-Cl and m-TT-Cl), whose properties can be adjusted by changing the side chains, are designed and synthesized with several high-yield steps. o-TT-Cl with V-shaped side chain induces a dominated J-aggregation and displays much better solubility and more ordered packing than m-TT-Cl with linear side chain. Thus, the o-TT-Cl-based blend film generates better phase morphology and charge transport than m-TT-Cl-based one. Finally, the power conversion efficiency of o-TT-Cl-based devices is 12.84%, which is much higher than that of m-TT-Cl-based ones (6.54%). This work highlights the importance of side chains engineering on improving photovoltaic performance of nonfused ring electron acceptors.

Versatile Sequential Casting Processing for Highly Efficient and Stable Binary Organic Photovoltaics

Forming an ideal bulk heterojunction (BHJ) morphology is a critical issue governing the photon to electron process in organic solar cells (OSCs). Complementary to the widely-used blend casting (BC) method for BHJ construction, sequential casting (SC) can also enable similar or even better morphology and device performance for OSCs. Here, BC and SC methods on three representative donor:acceptor (D:A) blends are utilized, that is, PM6:PC₇₁ BM, PM6:IT-4F and PM6:L8-BO. Higher power conversion efficiencies (PCEs) in all cases by taking advantage of beneficial morphology from SC processing are achieved, and a champion PCE of 18.86% (certified as 18.44%) based on the PM6:L8-BO blend is reached, representing the record value among binary OSCs. The observations on phase separation and vertical distribution inspire the proposal of the swelling-intercalation phase-separation model to interpret the morphology evolution during SC processing. Further, the vertical phase segregation is found to deliver an improvement of device performance via affecting the charge transport and collection processes, as evidenced by the D:A-ratio-dependent photovoltaic properties. Besides, OSCs based on SC processing show advantages on device photostability and upscale fabrication. This work demonstrates the versatility and efficacy of the SC method for BHJ-based OSCs.

Unfused Acceptors Matching π-Bridge Blocks with Proper Frameworks Enable Over 12% As-Cast Organic Solar Cells

Emerging unfused-ring acceptors (UFAs) have been explored in pursuit of low-cost high-efficient organic solar cells (OSCs). Assembling unfused building blocks into proper frameworks are challenging for the molecular design of UFAs. The authors report herein four UFAs adopting either dithiophene cyclopentadiene (DTC) or dithieno[3,2-b:2',3'-d]pyrrole (DTP) as π-bridge units with different molecular frameworks for high-efficient as-cast OSCs. All these acceptors exhibit strong near-infrared absorption and narrow optical band gap (E_g ^opt  < 1.50 eV). DTC-bridged symmetric and DTP-bridged asymmetric UFAs exhibit higher planar conformation as well as suitable miscibility and homogeneous phase separation when blending with polymer donor PBDB-T to promote efficient charge transport in the blends. Their blends with PBDB-T contribute optimal PCE of 12.17% and 11.92% in as-cast OSCs, among the highest values for UFAs based as-cast devices in the literature. Experimental and theoretical simulations systematically reveal the impact of manipulating the molecular framework of UFAs on their conformation, optoelectronic, and photovoltaic performance. The results indicate the matching π-bridge units with molecular frameworks as an attractive approach to design UFAs for high-performance as-cast OSCs.

Simultaneous Tuning of Alkyl Chains and End Groups in Non-fused Ring Electron Acceptors for Efficient and Stable Organic Solar Cells

Fine-tuning the alkyl chains and end groups of non-fused ring electron acceptors (NFREAs) plays vital roles in the promotion of charge transfer (CT) and power conversion efficiency (PCE). In this work, we developed a series of A-D-A'-D-A-type NFREAs, which possess the same terminals (A), the cyclopentadithiophene unit (D), and the thieno[3,4-c]pyrrole-4,6-dione (A'). Despite the subtle difference in side chains and halogenated end groups, the six acceptors exhibit a considerable difference in the efficiency and device stability of the organic solar cells (OSCs). Among the molecules, chlorinated NFREAs show a broader light absorption than the fluorinated ones do. Compared with C8C8-4F (1-octylnonyl and fluorination) and C6C4-4Cl (2-butyloctyl and chlorination), C8C8-4Cl (1-octylnonyl and chlorination) exhibits a lower highest occupied molecular orbital level, higher electron mobility, and denser molecular packing. The OSCs based on PM6:C8C8-4Cl yield the best PCE of 14.11%, which is attributed to the faster charge transport, high miscibility, and preferable morphology. Moreover, the PM6:C8C8-4Cl devices retain 91.1% of the initial PCE after being placed in air with 67% relative humidity for 50 days. This work shows that the simultaneous optimization of side chains and end groups facilitates the CT and improves the stability in the OSCs, offering a novel view into the molecular design of A-D-A'-D-A-type NFREAs.

Near-Infrared Materials: The Turning Point of Organic Photovoltaics

Near-infrared (NIR)-absorbing organic semiconductors have opened up many exciting opportunities for organic photovoltaic (OPV) research. For example, new chemistries and synthetical methodologies have been developed; especially, the breakthrough Y-series acceptors, originally invented by our group, specifically Y1, Y3, and Y6, have contributed immensely to boosting single-junction solar cell efficiency to around 19%; novel device architectures such as tandem and transparent organic photovoltaics have been realized. The concept of NIR donors/acceptors thus becomes a turning point in the OPV field. Here, the development of NIR-absorbing materials for OPVs is reviewed. According to the low-energy absorption window, here, NIR photovoltaic materials (p-type (polymers) and n-type (fullerene and nonfullerene)) are classified into four categories: 700-800 nm, 800-900 nm, 900-1000 nm, and greater than 1000 nm. Each subsection covers the design, synthesis, and utilization of various types of donor (D) and acceptor (A) units. The structure-property relationship between various kinds of D, A units and absorption window are constructed to satisfy requirements for different applications. Subsequently, a variety of applications realized by NIR materials, including transparent OPVs, tandem OPVs, photodetectors, are presented. Finally, challenges and future development of novel NIR materials for the next-generation organic photovoltaics and beyond are discussed.

Exploiting Novel Unfused-Ring Acceptor for Efficient Organic Solar Cells with Record Open-Circuit Voltage and Fill Factor

Unfused-ring acceptors (UFAs) show bright application prospects in organic solar cells (OSCs) thanks to their easy synthesis, low cost, and good device performance. The selection of central-core building block and suitable side chain are the key factors to achieve high-performance UFAs. Current tremendous endeavors for the development of UFAs mainly concentrate on obtaining higher short-circuit current density (J_sc ), albeit accompanied by low open-circuit voltage (V_oc ) and modest fill factor (FF). Herein, two novel A-D-A'-D-A type UFAs (BTCD-IC and BTCD-2FIC), which have the same new electron-withdrawing central-core dithieno[3',2':3,4;2'',3'':5,6]-benzo[1,2-c][1,2,5]thiadia-zole (DTBT) and cyclopentadithiophene unit (CPDT, substituted by 2-butyl-1-octyl alkyl chain) coupling with different terminals, were designed and synthesized. Two UFAs showed strong and broad light absorption in the wavelength range of 300-850 nm owing to the strong intramolecular charge transfer effect favorable by DTBT core. Compared with BTCD-IC, BTCD-2FIC with F-containing terminal group exhibited higher molar extinction coefficient, lower energy level, higher charge mobility, stronger crystallinity, more ordered molecular stacking, and better film morphology. As a result, when blended with donor polymer PBDB-T (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']-dithiophene-4,8-dione)]), the BTCD-2FIC-based OSC achieved a superior power conversion efficiency (PCE) of 11.32 %, with a high V_oc of 0.85 V, a J_sc of 18.24 mA cm^-2 , and a FF of 73 %, than BTCD-IC-based OSC (PCE=8.96 %). Impressively, the simultaneously enhanced V_oc and FF values of the PBDB-T:BTCD-2FIC device were the highest values of the A-D-A'-D-A-type UFAs. The results demonstrate the application of electron-withdrawing DTBT central-core unit in efficient UFAs provides meaningful molecular design guidance for high-performance OSCs.

Ladder-Type Fused Benzodithiophene Extended along the Short-Axis Direction as a New Donor Building Block for Efficient Organic Solar Cells

Ladder-type fused aromatic systems are important core structures of small molecule acceptors for organic solar cells (OSCs). In this study, a new ladder-type donor building block, based on the benzo[1,2-b:4,5-b']dithiophene (BDT) unit where the 3,7 positions of the BDT thiophene rings and the 3' position of the thiophene rings of the vertical BDT were fused to construct a seven-ring core structure named f-DTBDT, was investigated. In the f-DTBDT structure, the fusion of the BDT core and the thiophene rings at the 4,8 positions of BDT constrains all of the aromatic rings in a coplanar structure. The newly designed f-DTBDT was successfully employed as a core donor building block and conjugated with three electron-withdrawing acceptors (2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene) malononitrile (2HIC), 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (2FIC), and 2-(5,6-dichloro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (2ClIC)) as acceptor-donor-acceptor (A-D-A)-type acceptor materials for OSCs. Characterization results showed that the three synthesized A-D-A acceptors of DTBDT-IC, DTBDT-4F, and DTBDT-4Cl have high absorption behavior in the vis-NIR region as result of an intramolecular charge transfer interaction engendered by f-DTBDT and the ending group. The absorption regions of the acceptors were complementary with that of polymer PM6. Also, the frontier orbital energy levels of the new acceptors and wide-band-gap PM6 are well matched. Bulk heterojunction OSCs were fabricated using PM6 and the acceptors, and the highest power conversion efficiency (PCE) of 10.15% was obtained when using PM6:DTBDT-4F as the active layer.

Asymmetric Non-Fullerene Small-Molecule Acceptors toward High-Performance Organic Solar Cells

Applying an asymmetric strategy to construct non-fullerene small-molecule acceptors (NFSMAs) in organic solar cells (OSCs) plays a vital role in the development of organic photovoltaic materials. In the past several years, taking advantage of the larger dipole moment and stronger intermolecular interactions, asymmetric NFSMAs have witnessed tremendous progress in OSCs with a power conversion efficiency of over 18%. From a structural point of view, besides the possible changes in the conformation effect on molecular packing, asymmetric acceptors can also achieve a balance between the solubility and the crystallinity. Herein, we systematically investigate the structure-property-performance relationships of asymmetric NFSMAs that have recently emerged and try to clarify the feasibility and practicality of an asymmetric strategy for the design of higher-performance NFSMAs. Finally, we put forward our views and a concise outlook on the asymmetric strategy.

Facile Modification of a Noncovalently Fused-Ring Electron Acceptor Enables Efficient Organic Solar Cells

Electron acceptors with nonfused aromatic cores (NCAs) have aroused increasing interest in organic solar cells due to the low synthetic complexity and flexible chemical modification, but the corresponding device performance still lags behind. Herein, we designed and synthesized two new quinoxaline-based NCAs, namely, QOC6-4H and QOC6-4Cl. Although both NCAs show good backbone coplanarity, QOC6-4Cl with chlorinated end groups exhibits higher extinction coefficient, enhanced crystallinity, and more compact π-π stacking, which is correlated with the stronger intermolecular interactions induced by chlorine atoms. Benefiting from the broader and stronger optical absorption, improved carrier mobilities, and suppressed charge recombination, a notable power conversion efficiency (PCE) of 12.32% with a distinctly higher short-current density (J_sc) of 22.91 mA cm^-2 and a fill factor (FF) of 69.01% could be obtained for the PBDB-T:QOC6-4Cl-based device. The PCEs of PBDB-T:QOC6-4H were only lower than 8%, which could mainly be attributed to the unsymmetric charge transport. Our work proves that the chlorination of end groups is a facile and effective strategy to enhance the intermolecular interactions and thus the photovoltaic performance of NCAs, and a careful modulation of the intermolecular interactions plays a vital role in further developing both high-performance and low-cost organic photovoltaic materials.

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Non-Fullerene Acceptors with Quinoxaline as the Core

To date, the fused-ring electron acceptors show the best photovoltaic performances, and the development of simple non-fullerene acceptors via intramolecular noncovalent interactions can reduce synthetic costs. In this work, four simple non-fullerene acceptors with an A-D-A'-D-A configuration (QCIC1, QCIC2, QCIC3, and QCIC4) were synthesized. They contained the same conjugated backbone (A': quinoxaline; D: cyclopentadithiophene; A: dicyano-indanone) but different halogen atoms and alkyl side chains. Due to the chlorination on the end-groups and the most and/or longest branched alkyl side chains on the backbone, the blended film composed of QCIC3 and donor poly{[2,6'-4,8-di(5-ethylhexylthienyl)benzo [1,2-b : 4,5-b']dithiophene]-alt-[5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c : 4',5'-c']dithiophene-4,8-dione)]} (PBDB-T) exhibited the strongest π-π stacking and the most suitable phase-separation domains among the four blended films. Therefore, the QCIC3-based organic solar cells yielded the highest power conversion efficiency of 10.55 %. This work provides a pathway to optimize the molecular arrangements and enhance the photovoltaic property of simple electron acceptors through subtle chemical modifications.

Regulating the Aggregation of Unfused Non-Fullerene Acceptors via Molecular Engineering towards Efficient Polymer Solar Cells

Tuning molecular aggregation via structure design to manipulate the film morphology still remains as a challenge for polymer solar cells based on unfused non-fullerene acceptors (UF-NFAs). Herein, a strategy was developed to modulate the aggregation patterns of UF-NFAs by systematically varying the π-bridge (D) unit and central core (A') unit in A-D-A'-D-A framework (A and D refer to electron-withdrawing and electron-donating moieties, respectively). Specifically, the quantified contents of H- or J-aggregation and crystallite disorder of three UF-NFAs (BDIC2F, BCIC2F, and TCIC2F) were analyzed via UV/Vis spectrometry and grazing incidence X-ray scattering. The results showed that the H-aggregate-dominated BCIC2F with less crystallite disorder exhibited a more favorable blend morphology with polymer donor PBDB-T (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']dithiophene-4,8-dione)]) relative the other two UF-NFAs, resulting in improved exciton dissociation and charge tranport. Consequently, photovoltaic devices based on BCIC2F delivered a promising power conversion efficiency of 12.4 % with an exceptionally high short-circuit current density of 22.1 mA cm^-2 .

Simple Non-Fused Electron Acceptors Leading to Efficient Organic Photovoltaics

Despite the remarkable progress achieved in recent years, organic photovoltaics (OPVs) still need work to approach the delicate balance between efficiency, stability, and cost. Herein, two fully non-fused electron acceptors, PTB4F and PTB4Cl, are developed via a two-step synthesis from single aromatic units. The introduction of a two-dimensional chain and halogenated terminals for these non-fused acceptors plays a synergistic role in optimizing their solid stacking and orientation, thus promoting an elongated exciton lifetime and fast charge-transfer rate in bulk heterojunction blends. As a result, PTB4Cl, upon blending with PBDB-TF polymer, has enabled single-junction OPVs with power conversion efficiencies of 12.76 %, representing the highest values among the reported fully unfused electron acceptors so far.

An unfused-ring acceptor with high side-chain economy enabling 11.17% as-cast organic solar cells

Side-chain engineering on nonfullerene acceptors (NFAs) is crucial for modulating their solubility and crystallinity as well as packing behaviours in active layers to pursue high-performance organic solar cells (OSCs). High weight ratios of side chains are generally used by NFAs for the desired device efficiencies. Side-chain economy has seldom been discussed despite increased cost and difficulties in synthesis when optimizing the molecular design. Herein, we introduce 7H-dibenzo[c,g]carbazole (DCB) as an electron-donating core to design unfused-ring acceptors (UFAs) with a dramatically low weight ratio of side chains. DCB-4F has thus been designed and compared with the carbazole cored analogue (CB-4F). The unique conformation of the DCB core endows DCB-4F with higher solubility (8.2 mg mL^-1 in chloroform) compared to CB-4F (2.2 mg mL^-1) when using the same side chains. Featuring a lowest unoccupied molecular orbital (LUMO) level of -3.86 eV and an optical bandgap of 1.55 eV, the DCB-4F film exhibits an absorption profile (maximum 667 nm) complementary to polymer donor PM6. The PM6:DCB-4F as-cast OSCs deliver a power conversion efficiency (PCE) of 9.56% with a high open-circuit voltage (V_OC) of 1.00 V. By adding 10 wt% PC₇₁BM into the casting solutions, a greatly improved PCE of 11.17% is readily achieved, which is one of the highest PCEs for as-cast single-junction UFA-based devices. The PM6:DCB-4F based blends show homogeneous nano-fiberous morphology and higher hydrophobicity. The design of conformation-tuned NFAs using sterically hindered DCB-like cores is promising to achieve highly efficient as-cast OSCs.

Alkyl-Side-Chain Engineering of Nonfused Nonfullerene Acceptors with Simultaneously Improved Material Solubility and Device Performance for Organic Solar Cells

Two nonfullerene small molecules, TBTT-BORH and TBTT-ORH, which have the same thiophene-benzothiadiazole-thiophene (TBTT) core flanked with butyloctyl (BO)- and octyl (O)-substituted rhodanines (RHs) at both ends, respectively, are developed as electron acceptors for organic solar cells (OSCs). The difference between the alkyl groups introduced into TBTT-BORH and TBTT-ORH strongly influence the intermolecular aggregation in the film state. Differential scanning calorimetry and UV-vis absorption studies reveal that TBTT-ORH exhibited stronger molecular aggregation behavior than TBTT-BORH. On the contrary, the material solubility is greatly improved by the introduction of a BO group in TBTT-BORH, and the inevitably low molecular interaction and packing ability of the as-cast TBTT-BORH film can be effectively increased by a solvent-vapor annealing (SVA) treatment. OSCs based on the two acceptors and PTB7-Th as a polymer donor are fabricated owing to their complementary absorption and sufficient energy-level offsets. The best power conversion efficiency of 8.33% is obtained with the SVA-treated TBTT-BORH device, where, together with a high open-circuit voltage of 1.02 V, the charge-carrier mobility and the short-circuit current density were greatly improved by the SVA treatment to levels comparable to those of the TBTT-ORH device because of the suppressed charge recombination and improved film morphology. In this work, the simultaneous improvement of both material solubility and device performance is achieved through alkyl side-chain engineering to balance the trade-offs among material solubility/crystallinity/device performance.

A–D–C–D–A type non-fullerene acceptors based on the benzotriazole (BTA) unfused core for organic solar cells

Increase of fluorine atoms to modulate the molecular orientation and thus enhanced the photovoltaic performances.

Designing high performance conjugated materials for photovoltaic cells with the aid of intramolecular noncovalent interactions

This review summarizes the recent progress in high performance photovoltaic materials with the aid of intramolecular noncovalent interactions.

B←N-Incorporated Dibenzo-azaacene with Selective Near-Infrared Absorption and Visible Transparency

Organic compounds with selective near-infrared absorption and visible transparency are very desirable for fabrication of transparent/semitransparent optoelectronic devices. Herein, we develop a molecule with selective near-infrared absorption property, QBNA-O, in which four B←N units are incorporated to the core and two benzodioxin groups are introduced at the termini of the dibenzo-azaacene skeleton. QBNA-O exhibits a small optical gap of 1.39 eV due to the strong electron-donating benzodioxin groups and the strong electron-withdrawing B←N units. In toluene solution, QBNA-O shows a strong absorption peak at 856 nm with the full width at half maximum (FWHM) of only 41 nm as well as very weak absorption in the visible range from 380 nm to 760 nm. Thin films of QBNA-O exhibit the average visible transparency (AVT) of 78 % at the thickness of 205 nm and 90 % at the thickness of 45 nm. Solution-processed organic field-effect transistors (OFETs) of QBNA-O display ambipolar transporting behavior with the electron mobility of 0.52 cm²  V^-1  s^-1 and the hole mobility of 0.013 cm²  V^-1  s^-1 together with excellent air-stability. The selective NIR absorbing property and excellent charge transporting property imply that QBNA-O can be used to fabricate transparent organic optoelectronic devices.

Simple Near-Infrared Electron Acceptors for Efficient Photovoltaics and Sensitive Photodetectors

Although promising progress has been made in near-infrared (NIR) electron acceptors for broadening photoresponse of optoelectronics, there are still strong needs for efficient NIR materials with low synthetic complexities. In this work, three simple NIR acceptors are developed with absorption up to 1000 nm and possessing the same dithiophene cores with varied heteroatom linkages to carbon (C) atom for W1, to silicon (Si) for W2, and to nitrogen (N) for W3. It is found that the tuning of only one atom for simple acceptors can surprisingly lead to a large difference in photoelectric properties and solid stacking, as well as the performance in optoelectronics. Although quite simple, these electron acceptors, especially W1 (C), can also perform quite efficiently as organic photovoltaics (OPVs) as well as sensitive organic photodetectors (OPDs) when blended with PTB7-Th polymer. It is worthy to note that, among the representative NIR acceptors with over 950 nm absorption, W1 possesses one of the best figure-of-merit when considering the photoelectric performance versus synthetic complexity of materials. As a result, the PTB7-Th:W1-based OPDs reach a fast temporal response, ultralow-light intensity detection of 1.70 × 10^-11 W·cm^-2, and a high specific detectivity of 4.28 × 10¹² cm·Hz^1/2·W^-1 at 830 nm, representing a highly sensitive self-powered OPD approach the commercial broadband silicon detectors. These simple structure materials provide a potential example for further application of NIR electron acceptor.