Advanced X-ray Shielding Materials Enabled by the Coordination of Well-Dispersed High Atomic Number Elements in Natural Leather

Polyethyleneimine/hydrated titanium oxide-functionalized fibrous adsorbent for removing cobalt: Adsorption performance and irradiation stability

Radionuclides of ⁶⁰Co often encountered in the fields of radiation therapy, medical preparation, and equipment sterilization, which have been considered fatal. Therefore, developing efficient and irradiation-stable adsorbents for the removal of ⁶⁰Co in wastewater is urgently needed. An irradiation-stable fibrous adsorbent was fabricated through the surface functionalization of collagen fibers (CFs) by polyethyleneimine (PEI) and hydrated titanium oxide (TiO) (PEI-TiO-CFs). PEI-TiO-CFs, including their adsorption performance and irradiation stability, were systematically investigated. Results showed that PEI-TiO-CFs exhibit a maximum adsorption capacity of 0.5575 mmol g^-1. In addition, the adsorption capacity of PEI-TiO-CFs only demonstrated a slight decrease in the selectivity investigation of Co²⁺ mixed with another coexisting ion, such as Na⁺, K⁺, and NO^3-, Cl^-. Furthermore, breakthrough point of PEI-TiO-CFs in column is high at 80 BV (bed volume) and the PEI-TiO-CF column can be mostly regenerated using 12 BV of Na₂EDTA solution. Excellent irradiation stability of PEI-TiO-CFs was confirmed by the maintained morphology and adsorption capacity after irradiation at 350 kGy of ⁶⁰Co γ-ray. Results indicated that PEI-TiO-CFs are an effective adsorbent for radioactive cobalt removal from aqueous solutions.

Natural leather based gamma-ray shielding materials enabled by the coordination of well-dispersed Bi3+/Ba2+ ions and RE2O3 coating

Gamma rays is widely used in modern science and technology, but it may cause health damage to practitioners. In the present study, natural composites based on leather and high-Z elements (atomic number ≥ 56) were fabricated and used as gamma rays shielding materials. These shielding materials were prepared by coating rare earth nanoparticles (Er2O3 or La2O3) onto the surface of natural leather, which was first impregnated with Bi3+ and Ba2+. Results show that the attenuation efficiency of the prepared Er1.31Bi5.46-NL (1.31 and 5.46 mmol cm−3 loaded elements) with thickness of 3.2 mm was 61.57% for incident rays at 121.78 keV (152Eu) and reached 96.4% in the incident of 59.5 keV (241Am), which is comparable to that of 0.25-mm lead plate (54.54 mmol cm−3). In addition, these natural-leather-based shielding materials exhibited low density (approximately 1/10 of Pb), high strength and wearable behaviors.

Graphical abstract

Leather for flexible multifunctional bio-based materials: a review

Nowadays, diverse leather usage conditions and increasing demands from consumers challenge the leather industry. Traditional leather manufacturing is facing long-term challenges, including low-value threshold, confined application fields, and environmental issues. Leather inherits all the biomimetic properties of natural skin such as flexibility, sanitation, cold resistance, biocompatibility, biodegradability, and other cross-domain functions, achieving unremitting attention in multi-functional bio-based materials. Series of researches have been devoted to creating and developing leather-based flexible multi-functional bio-materials, including antibacterial leather, conductive leather, flame-retardant leather, self-cleaning leather, aromatic leather, and electromagnetic shielding leather. In this review, we provide a comprehensive overview of the commonly used leather-based functional materials. Furthermore, the possible challenges for the development of functional leathers are proposed, and expected development directions of leather-based functional materials are discussed. This review may promote and inspire the emerging preparation and applications of leather for flexible functional bio-based materials.

Graphical Abstract

Polyurethane-based retanning agents with antimicrobial properties

Polyurethane-based retanning agents with antimicrobial properties were synthesized by the chemical incorporation of ciprofloxacin (CPFX) units into polyurethane chains. The chemical structures were characterized by Fourier transform infrared (FTIR) and gel permeation chromatography (GPC). Then, the retanning agents were applied in the leather retanning process. Owing to the conjugation of CPFX into polyurethane chains, the molecular weight increases, further leading to the decrease in hydroxyl value and increase in particle size. The shrinkage temperature was improved after retanning. Owing to the filling of retanning agents in the gap of collagen fibers, the average thickness of leather increased by 65.8%. The mechanical properties of leather were visibly improved because of the large number of –COOH coordinate with Cr3+ and more hydrogen crosslinking with carboxyl group, amino group, and hydroxyl group of leather collagen. Furthermore, leather retanned by these polyurethane-based retanning agents presented good antimicrobial properties. The antibacterial activity could be conserved above 89% even after rinsing for ten times.

BSA-templated Ultrasmall Ag/Gd2O3 as A Self-enabled Nanotheranostics for MR/CT/PA tri-modality Imaging and Photothermal Therapy

It is becoming more and more important to effectively integrate multiple complementary diagnostic imaging and synergistic therapy into a nano-platform, but it is still challenging. Here, we used bovine serum...

Interface assembly of specific recognition gripper wrapping on activated collagen fiber for synergistic capture effect of iodine

Efficient capture of radioactive iodine (¹²⁹I, ¹³¹I) is of great significance in spent fuel treatment. In this paper, a new adsorbent named Catechin@ACF was successfully prepared through interface assembly of specific recognition gripper with plant polyphenols (catechin) on activated collagen fiber (ACF), and the catechin membrane with specific grip on iodine was successfully constructed on the surface of ACF. The results showed that the adsorbent assembled catechin membrane was rich in aromatic rings, hydroxyl groups and imine adsorption sites, and possessed specific recognition and capture characteristics of iodine. Moreover, the as-prepared Catechin@ACF showed excellent capture capacity for iodine vapor and iodine in organic solution with the maximum capture capacity of 2122.68 mg/g and 258.29 mg/g, respectively. In iodine-cyclohexane solution, the adsorption process was in according with the Pseudo first order kinetic and Langmuir isothermal model. In addition, the specific recognition and capture mechanism analysis indicated that the aromatic rings, phenolic hydroxyl groups and imine groups in the catechin membrane were the specific and effective grippers for iodine, and finally iodine formed a stable conjugated system with the adsorbent in the form of I^- and I₃^-. Therefore, the as-prepared specific iodine capturer Catechin@ACF was expected to play a vital role in the capture of radioactive iodine in spent fuel off-gas because of its specific recognition, high capture capacity, large-scale preparation, and environment-friendly.

Shielding of Cosmic Radiation by Fibrous Materials

Cosmic radiation belongs to the challenges engineers have to deal with when further developing space travel. Besides the severe risks for humans due to high-energy particles or waves, the impact of cosmic radiation on electronics and diverse materials cannot be neglected, even in microsatellites or other unmanned spacecraft. Here, we explain the different particles or waves found in cosmic radiation and their potential impact on biological and inanimate matter. We give an overview of fiber-based shielding materials, mostly applied in the form of composites, and explain why these materials can help shielding spaceships or satellites from cosmic radiation.

Research advances in the fabrication of biosafety and functional leather: A way-forward for effective management of COVID-19 outbreak

With the recent events following the pandemic COVID-19, global awareness about the use of biosafety materials has been in raise. Leather industry being a major commodity-driven sector, its role in addressing the issues concerning the safe use of leather products has become inevitable for the sustainability of the industry. A significant number of researches have been conducted to fabricate bio-safe leather by incorporating different types of antimicrobial agents during leather manufacturing. Besides, the increasing diversity in the development of synthetic materials and the impact of COVID-19 outbreak on automotive industry may create more demand from customers for incorporating different functionalities in leather without losing its inherent properties. Some of the key functionalities discussed include resistance to microbial growth, self-cleaning through superhydrophobicity and photocatalysis, thermal regulation, flame retardance and scented leather. This review focusses on the fabrication of such advanced functional leather materials over the past decade with special emphasis on antimicrobial leather. Some of the key factors elaborated in the review include the state of art approaches for the preparation of functional materials, mode of incorporation of the same into the leather matrix, the mechanism behind with a perspective on the challenges involved in fabrication for real-world applications. A major outcome of this review is that even though several kinds of cutting edge researches are happening in the field of leather manufacturing, most of them were not validated for its practical applicability and sustainability of the proposed solution. This could be majorly attributed to the cost involved in fabrication of such materials, which forms a crucial factor when it comes to a mass production industry such as leather. Also, the researchers should concentrate on the toxicity of the fabricated materials which can impede the process of adopting such emerging and need of the hour technologies in the near future. Knowledge obtained from this review on fabrication of bio-safety leather against bacteria, mold and fungi would help further to integrate the antiviral property into the same which is a global need. Also, fabrication of functionalized leather would open new avenues for leather manufactures to venture into the development of advanced leather products such as flexible electronics, radiation shielding and fire fighting garments etc.

Multifunctional Leather Surface Design by Using Carbon Nanotube-Based Composites

This paper deals with original research in smart leather surface design for the development of multifunctional properties by using multi-walled carbon nanotube (MWCNT)-based nanocomposites. The conductive properties were demonstrated for both sheepskin and bovine leather surfaces for 0.5% MWCNTs in finishing nanocompositions with prospects for new material design intended for flexible electronics or multifunctional leathers. The photocatalytic properties of bovine leather surface treated with 0.5% MWCNTs were shown against an olive oil stain after visible light exposure and were attributed to reactive oxygen species generation and supported by contact angle measurements in dynamic conditions. The volatile organic compounds' decomposition and antibacterial tests confirmed the self-cleaning experimental conclusions. Ultraviolet protection factor had excellent values for leather surfaces treated with multi-walled carbon nanotube and the fastness resistance tests showed improved performance compared to control samples. Scanning electron microscopy with energy dispersive X-ray (SEM-EDX), X-ray photoelectron spectroscopy (XPS), and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy analysis confirmed the influence of different leather surfaces on MWCNT dispersion with an effect on nanoparticle reactivity and efficiency in self-cleaning properties. Multifunctional leather surfaces were designed and demonstrated through MWCNT-based nanocomposite use under conventional finishing conditions.