Red Fluorescent Carbon Dot Powder for Accurate Latent Fingerprint Identification using an Artificial Intelligence Program

Luminescent nanomaterials for developing high-contrast latent fingerprints

Fingerprint patterns (or epidermal ridges) are by far one of the most reliable techniques for individual identification. Fingerprint patterns get deposited on all kinds of solid surfaces due to human transudation or exudation process. Bodily fluids through sweat glands contain moisture, natural oils and proteins. Since latent fingerprint patterns are not readily recognizable they are collected from a crime scene and are further processed physically or chemically. Fingerprints obtained using conventional black and white powders face severe drawbacks including low sensitivity, high background interference from the substrates, involvement of toxic materials, and poor stability. To overcome the above-listed issues, especially for coloured and transparent substrates, luminescent materials have emerged as potential agents for rapid visualization of high-contrast latent fingerprints. This review covers the recent advancements in luminescent nanomaterials of both kinds (up and down conversion) and persistent nanophosphors for developing latent fingerprints. Special emphasis has been given to an unusual class of luminescent materials known as persistent nanophosphors, which do not require a constant excitation, thereby completely eradicating background noise. The review also covers different approaches to gathering fingerprints such as powder dusting, cyanoacrylate fuming, ninhydrin fuming and vacuum metal deposition.

Nitrogen-Doped Carbon Quantum Dots with Photoactivation Properties for Ultraviolet Ray Detection

Photoactivation is a phenomenon that could enhance the photoluminescence (PL) and photostability upon UV/vis light exposure, which is usually observed in CdSe/ZnS quantum dots (QDs). However, the photoactivation phenomenon has been scarcely reported in fluorescent carbon quantum dots (CQDs). Herein, the nitrogen-doped carbon quantum dots (N-CQDs) were prepared through a facile solvothermal approach with naphthalenetracarboxylic dianhydride and serine as precursors. Upon simple UV light irradiation for 10 min, the fluorescence quantum yield (QY) of N-CQDs could increase up to 10-fold. Based on this phenomenon, the N-CQDs were explored as an ultraviolet (UV) light sensor to assess the intensity of ultraviolet radiation in sunlight and indirectly evaluate the UV-blocking efficiency of various sunscreen products. Thus, this contribution not only provided an insight into developing a low-cost UV detector but also opened a door for the development of carbon quantum dots with converse-photobleaching properties.

Particle Size-Tunable Polydopamine Nanoparticles for Optical and Electrochemical Imaging of Latent Fingerprints on Various Surfaces

Powder dusting method is the most widely used approach due to its low cost, simplicity, minimal instrument dependence, and extensive applicability for developing latent fingerprints (LFPs). Herein, a novel optical and electrochemical dual-mode method for high-resolution LFP enhancement has been explored based on size-tunable polydopamine (PDA) nanoparticles (NPs) and scanning electrochemical microscopy (SECM). Dark PDAs rich in functional groups and negative charges can combine with the residues of LFPs on various surfaces with high sensitivity and selectivity to realize high-resolution visual fingerprint physical patterns on various porous and nonporous substrates with light color. However, optical visualization is not feasible for LFPs on dark or multicolored surfaces. Fortunately, based on the differences in electrochemical reactivity between ridges and furrows caused by the conductivity and reducibility of PDA powders, SECM can serve as a powerful supplement to optical methods to effectively overcome background color interference and distinctly display fingerprint patterns. Intriguingly, it is noteworthy that the binding amount and particle size of PDA powder significantly affected the optical and electrochemical visualization of LFPs: more powder binding amounts provided darker ridges in optical, and more surface reaction sites (larger powder binding mass at the same particle size or smaller particle size at the same mass) provided higher currents of ridges in electrochemical imaging. It demonstrates that the PDA powder as a dual-mode developer for LFPs offers a promising method for individual identification in forensics.

J P, Harohally NV, Krishnamurthy C, Jathi K, Ahmad A, Alshammari MB, Lokanath NK. Structural Investigation of Schiff Base Ligand and Dinuclear Copper Complex: Synthesis, Crystal Structure, Computational, and Latent Fingerprint Analysis

The structural studies of the fluorinated Schiff base ligand and its copper complex were synthesized and characterized by Fourier transform infrared, UV-visible, and photoluminescence spectroscopy. Single-crystal X-ray diffraction analysis unveils a dinuclear copper complex arising from double bridging acetate anions to copper ions that are chelated by the tridentate Schiff base ligand Cu(LS). The trigonality index τ5 of 0.080 indicates a distorted square pyramidal coordination geometry for the metal. The SL ligand and complex exhibit intra- and intermolecular interactions, leading to unique supramolecular architectures. The structural changes between the free halogenated Schiff base ligand and upon coordination with the metal were extensively studied by experimental and theoretical approaches. The intra- and intermolecular interactions have been analyzed by Hirshfeld surface and quantum theory of atoms in molecules analysis, and the enrichment ratio highlights the most favored interactions in the formation of molecular packing. The chemical and physical properties, such as the HOMO - LUMO energy gap, chemical reactivity, and electron density topology, are studied using density functional theory studies. In addition, the Schiff base ligand compound is used to study the latent fingerprint analysis.

Unveiling Hidden Prints: Optically stimulated luminescence for latent fingerprint detection

Fluorescent lighting and optical techniques have been widely utilized to enhance the detection of latent fingerprints. However, the development of new techniques is imperative to expand the range of surfaces from which latent fingerprints can be detected. When relying on traditional methods, fingerprint evidence can remain undetected or even disregarded due to insufficient detection and limited detail, especially when dealing with a luminescent background. In this study, we propose the utilization of optically stimulated luminescence (OSL) applied to a Ba2SiO4 matrix, co-doped with Eu2+ and Dy3+, as a powerful method for visualizing latent fingerprints on various surfaces, including thin plastic bags, rigid duct tape, thin aluminum foil, and glass slices. This technique effectively eliminates any luminescent background and significantly enhances optical imaging. This represents the first successful application of OSL in the development of latent fingerprints, thus paving the way for more efficient and effective forensic techniques in the future.

Excitation-independent deep-blue emitting carbon dots with 62% emission quantum efficiency and monoexponential decay profile for high-resolution fingerprint identification

Reaching emissive nanomaterials at short wavelengths with a high quantum efficiency (QE) is an attractive task for researchers. This is more demanding in carbon dots (CDs) with diverse applications that usually emit photons at wavelengths around 450-620 nm. In this study, deep blue-emissive doped-CDs (d-CDs) with high photoluminescence (PL) QE up to 62% and excitation-independent properties were prepared via a short-time microwave irradiation method. The prepared CDs showed simultaneous amorphous and crystalline features, with average sizes of 4.75 nm and bright emission color located at 422 nm. It was found that the presence of sulfur-related dopant levels plays a key role in emission properties in such a way that the PL signal drops significantly in the absence of N-acetyl-l-cysteine (NAC) as a dopant source. On the other hand, the trisodium citrate dihydrate (TSC) was selected as a carbon source to form the main carbon skeleton without it no emission was recorded. Monoexponential-fitted recombination trend with an average lifetime of about 10 ns also confirmed excellent PL emission properties with uniform energy levels and minimized defect-contributing recombinations. The practical use of the as-prepared N, S-doped CDs was assessed in fingerprint detection indicating a bright and clear scheme for both core and termination regions of the fingerprint. Simplicity, cost-effectiveness, high-product yield, low toxicity, along with high/stable PL quantum efficiency in deep-blue wavelengths, and demonstrated ability for fingerprint purposes, support the prospective application of these dual doped-CDs for sensing and bioimaging applications.

Enhanced Fluorescence and Environmental Stability of Red-Emissive Carbon Dots via Chemical Bonding with Cellulose Films

The development of red emission carbon dots with bright solid-state fluorescence would significantly broaden their application in optoelectronic devices and sensors. Herein, a red-emissive carbon dot-based nanocomposite has been synthesized through chemical bonding with cellulose films. The red emission originating from the surface states of carbon dots was maintained in the cellulose films. Due to the stable chemical bonding, the photoluminescence intensity and emission wavelength remained unchanged for 12 months, and the quantum yield of the composite was enhanced over 4 times. It also showed outstanding stability in water or weak acid-base environments under pHs ranging from 2 to 11. Therefore, the mechanism of chemical bonding that eliminated the defects and preserved the efficient radiative process through surface states was proposed.

Preparation of Novel Magnetic Nanomaterials Based on "Facile Coprecipitation" for Developing Latent Fingerprints (LFP) in Crime Scenes

Recently, the application of novel nanomaterials, especially magnetic nanomaterials in the development of latent fingerprints (LFP), has become the hot focus for forensic scientists and criminal investigators. As a type of recyclable, environment-friendly material, Fe₃O₄ nanoparticles achieve a wonderful effect in visualization of LFP. We first report the synthesis and encapsulation of nano-Fe₃O₄ through "facile coprecipitation", (3-mercaptopropyl)triethoxysilane was covalently embedded into Fe₃O₄ nanoparticles, and the Fe₃O₄ core was encapsulated by the nanosilver to prepare novel magnetic nanomaterials (P-MNP@Ag) with the core-shell configuration. For comparison, the magnetic nanomaterials (S-MNP@Ag) were prepared by surface modification. Their composition, structure, and properties were characterized by SEM, TEM, XRD, IR, XPS, and VSM. Compared with commercially available gold powder, silver powder, bare magnetic powder, and prepared S-MNP@Ag, the development effect of LFP on different objects by using P-MNP@Ag had better performance, which presented the advantages of low background interference, high sensitivity, and clear secondary details in LFP. In the crime scenes of some influential cases, P-MNP@Ag had been applied to the visualization of LFP. The biometric identification of criminal suspects was confirmed through fingerprint comparison, which was highly affirmed by the public security department.

Acidic Groups Functionalized Carbon Dots Capping Channels of a Proton Conductive Metal-Organic Framework by Coordination Bonds to Improve the Water-Retention Capacity and Boost Proton Conduction

Crystalline porous materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been demonstrated to be versatile material platforms for the development of solid proton conductors. However, most crystalline porous proton conductors suffer from decreasing proton conductivity with increasing temperature due to releasing water molecules, and this disadvantage severely restricts their practical application in electrochemical devices. In this work, for the first time, hydrophilic carbon dots (CDs) were utilized to hybridize with high proton conductivity MOF-802, which is a model of MOF proton conductors, aiming to improve its water-retention capacity and thus enhance proton conduction. The resultant CDs@MOF-802 exhibits impregnable proton conduction with increasing temperature, and the proton conductivity reaches 10^-1 S cm^-1, much superior to that of MOF-802, making CDs@MOF-802 one of the most efficient MOF proton conductors reported so far. This study provides a new strategy to improve the water-retention capacity of porous proton conductors and further realize excellent proton conduction.

Aggregation induced emission based active conjugated imidazole luminogens for visualization of latent fingerprints and multiple anticounterfeiting applications

Aggregation-induced emission based organic heterocyclic luminogens bearing conjugated electronic structures showed much attention due to its excellent fluorescence in aggregation state. In this communication, a novel conjugated blue light emitting imidazole molecule is synthesized by one pot multicomponent reaction route is reported for the first time. The prepared molecule exhibits a strong fluorescence in aggregation state with exceptional properties, such as high purity, inexpensive, eco-friendly, large scale production, high photostability, etc. By considering these advantages, a new fluorescence based platform has been setup for in-situ visualization of latent fingerprints and its preservation by spray method followed by Poly(vinyl alcohol) masking. A clear and well defined fluorescence fingerprint images are noticed on variety of surfaces by revealing level 1-3 ridge features upon ultraviolet 365 nm light exposure. The dual nature of binding specificity as well as excellent fluorescence properties permits the visualization of latent fingerprints for longer durations (up to 365 days) with superior contrast, high sensitivity, efficiency, selectivity and minimal background hindrance. We further fabricated unclonable invisible security ink for various printing modes on valuable goods for protection against forging. The developed labels are displaying uniform distribution of ink and exceptional stability under various atmospheric environments. The development of long preservative information using aggregation-induced emission based luminogen opens up a new avenue in advanced forensic and data security applications.

Fluorescent Cationic Conjugated Polymer-Based Adaptive Developing Strategy for Both Sebaceous and Blood Fingerprints

Both latent sebaceous and blood fingerprints may provide valuable information for forensic investigation. To detect both types of fingerprints with no need to predistinguish them, a new adaptive developing strategy was proposed. A cationic conjugated polymer with poly[p-(phenylene ethylene)-alt-(thienylene ethynylene)] backbone (PPETE-NMe₃⁺) was synthesized, which was dissolved in N,N-dimethylformamide (DMF) to form the developing solution. Fingerprints were developed by a simple dropping and incubating process without any pre-/post-treatments. Fluorescent photographs of the developed fingerprints on various substrates demonstrated that this developing strategy was effective for both types of fingerprints on nonporous substrates. Gray value analysis further confirmed the enhancement of the legibility of the fingerprint images. The preliminary mechanism exploration suggested that certain weak interactions, such as hydrophobic interaction and electrostatic interaction, may synergistically contribute to the interaction between the polymer and fingerprint components. The molecular design of the polymer combined with an appropriate solvent endowed the developing system the adaptiveness toward different types of fingerprints. This adaptive developing strategy made the fingerprint-developing process more efficient and may be further extended to more practical application scenes.

Highly Stable, Nondestructive, and Simple Visualization of Latent Blood Fingerprints Based on Covalent Bonding Between the Fluorescent Conjugated Polymer and Proteins in Blood

Latent blood fingerprints (LBFPs) can provide critical information of foul play and help identify the suspects at violent crime scenes. The current methods for LBFP visualization are still not satisfactory because of the low sensitivity or complicated protocol. This study demonstrates a simple and effective LBFP visualization strategy by integrating a new amphiphilic fluorescent amino-functionalized conjugated polymer with the cotton-pad developing protocol. LBFPs on various substrates are visualized by simply covering them with the polymer solution-soaked cotton pads. The images display clear fingerprint patterns, ridge details, and sweat pores, even on very challenging substrates such as painted wood and multicolored can. The gray value analysis confirms semiquantitatively the enhancement of the contrast between ridges and furrows. Even LBFPs with various contaminations or aged for more than 600 days are effectively developed and visualized. The developed fingerprint images show superior stability over long storage time and against solvent washing. Moreover, the polymer causes no degradation of DNAs in the blood, suggesting the possibility of further DNA profiling and identification after development. The mechanistic investigation suggests that the formation of positive or inverted images can be attributed to the synergistic effects from the affinity between polymer and blood, and the affinity betwen polymer and substrate, as well as the slight quenching of polymer fluorescence by blood. Furthermore, the covalent bonding between the protonated primary amino group and proteins in blood endows the stability of the developed fingerprints. The result rationalizes the molecular design of the fluorescent polymer and sheds new light on the future strategies to effective LBFP visualization in practical applications.