Interpenetrated Metal-Organic Frameworks with Topology and Versatile Functions

Efficient CO2 Capture and Separation in MOFs: Effect from Isoreticular Double Interpenetration

Severe CO2 emissions has posed an increasingly alarming threat, motivating the development of efficient CO2 capture materials, one of the key parts of carbon capture, utilization, and storage (CCUS). In this study, a series of metal-organic frameworks (MOFs) named Sc-X (X = S, M, L) were constructed inspired by recorded MOFs, Zn-BPZ-SA and MFU-4l-Li. The corresponding isoreticular double-interpenetrating MOFs (Sc-X-IDI) were subsequently constructed via the introduction of isoreticular double interpenetration. Grand canonical Monte Carlo (GCMC) simulations were adopted at 298 K and 0.1-1.0 bar to comprehensively evaluate the CO2 capture and separation performances in Sc-X and Sc-X-IDI, with gas distribution, isothermal adsorption heat (Qst), and van der Waals (vdW)/Coulomb interactions. It is showed that isoreticular double interpenetration significantly improved the interactions between adsorbed gases and frameworks by precisely modulating pore sizes, particularly observed in Sc-M and Sc-M-IDI. Specifically, the Qst and Coulomb interactions exhibited a substantial increase, rising from 28.38 and 22.19 kJ mol-1 in Sc-M to 43.52 and 38.04 kJ mol-1 in Sc-M-IDI, respectively, at 298 K and 1.0 bar. Besides, the selectivity of CO2 over CH4/N2 was enhanced from 55.36/107.28 in Sc-M to 3308.61/7021.48 in Sc-M-IDI. However, the CO2 capture capacity is significantly influenced by the pore size. Sc-M, with a favorable pore size, exhibits the highest capture capacity of 15.86 mmol g-1 at 298 K and 1.0 bar. This study elucidated the impact of isoreticular double interpenetration on the CO2 capture performance in MOFs.

A novel threefold interpenetrated zirconium metal-organic framework exhibiting separation ability for strong acids

We report on the synthesis and selective adsorption property of a novel threefold interpenetrated Zr-based metal-organic framework (MOF), [Zr12O8(OH)8(HCOO)15(BPT)3] (BPT3- = [1,1'-biphenyl]-3,4',5-tricarboxylate) (abbreviated as Zr-BPT). This MOF shows a high tolerance to acidic conditions and has permanent pores, the size of which (approx. <5.6 Å) is the smallest ever reported among porous Zr-based MOFs with high acid tolerance. Zr-BPT selectively adsorbs aryl acids due to its strong affinity for them and exhibits separation ability, even between strong acid molecules, such as sulfonic and phosphonic acids. This is the first demonstration of a MOF exhibiting selective adsorption and separation ability for strong acids.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines

A europium(III) metal-organic framework (MOF), namely, {[[(CH₃)₂NH₂]₃Eu₂(DTTP-2OH)₂(HCOO)(H₂O)]·4H₂O}_n (Eu-MOF, H₄DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H₂O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10^-4 S cm^-1) at room temperature with a maximum conductivity of 1.91 × 10^-3 S cm^-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 μM for tetracycline, 0.13 μM for oxytetracycline and 0.11 μM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Fluorine extraction from organofluorine molecules to make fluorinated clusters in yttrium MOFs

A new rare earth based two-dimensional coordination network and a three-dimensional metal-organic framework (MOF) have been synthesized using bicinchoninic acid (BCA) and yttrium(iii) ions. Yttrium dimer nodes are formed in the absence of a modulator, resulting in a 2D layered coordination network (Y-BCA-2D). The presence of fluorinating agents, e.g., 2-fluorobenzoic acid (2-FBA), 2,6-difluorobenzoic acid (2,6-DFBA), and perfluorohexanoic acid (PFHxA) result in μ₃-F bridged metal hexaclusters (Y₆F₈) that form a three-dimensional MOF (Y-BCA-3D). It was found that Y³⁺ can break highly stable C-F bonds in aromatic and aliphatic fluorinated compounds. Single-crystal X-ray diffraction (SC-XRD) shows the presence of fluorine in the metal cluster which was confirmed by energy dispersive X-ray spectroscopy (EDS). High resolution X-ray photoelectron spectroscopy (XPS) and ¹⁹F Nuclear Magnetic Resonance (NMR) also verify the presence of metal-fluorine bonds in the cluster. The Y-BCA-3D MOF selectively adsorbs CO₂ but not N₂.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Surface, Interface and Structure Optimization of Metal-Organic Frameworks: Towards Efficient Resourceful Conversion of Industrial Waste Gases

Industrial waste gas emissions from fossil fuel over-exploitation have aroused great attention in modern society. Recently, metal-organic frameworks (MOFs) have been developed in the capture and catalytic conversion of industrial exhaust gases such as SO₂ , H₂ S, NO_x , CO₂ , CO, etc. Based on these resourceful conversion applications, in this review, we summarize the crucial role of the surface, interface, and structure optimization of MOFs for performance enhancement. The main points include (1) adsorption enhancement of target molecules by surface functional modification, (2) promotion of catalytic reaction kinetics through enhanced coupling in interfaces, and (3) adaptive matching of guest molecules by structural and pore size modulation. We expect that this review will provide valuable references and illumination for the design and development of MOF and related materials with excellent exhaust gas treatment performance.

Metal–organic frameworks with -type connectivity: design, pore structure engineering, and potential applications

The structure, pore size regulation, and potential applications of MOFs featuring ftw-type connectivity have been reviewed.

Interpenetrated Metal-Porphyrinic Framework for Enhanced Nonlinear Optical Limiting

Structural interpenetration in metal-organic frameworks (MOFs) significantly impacts on their properties and functionalities. However, understanding the interpenetration on third-order nonlinear optics (NLO) of MOFs have not been reported to date. Herein, we report two 3D porphyrinic MOFs, a 2-fold interpenetrated [Zn₂(TPyP)(AC)₂] (ZnTPyP-1) and a noninterpenetrated [Zn₃(TPyP)(H₂O)₂(C₂O₄)₂] (ZnTPyP-2), constructed from 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP(H₂)) and Zn(NO₃)₂ (AC = acetate, C₂O₄ = oxalate). ZnTPyP-1 achieves excellent optical limiting (OL) performance with a giant nonlinear absorption coefficient (3.61 × 10⁶ cm/GW) and large third-order susceptibility (7.73 × 10^-7 esu), which is much better than ZnTPyP-2 and other reported OL materials. The corresponding MOFs nanosheets are dispersed into a polydimethylsiloxane (PDMS) matrix to form highly transparent and flexible MOFs/PDMS glasses for practical OL application. In addition, the OL response optimized by adjusting the MOFs concentration in the PDMS matrix and the type of metalloporphyrin are discussed in the ZnTPyP-1 system. The theoretical calculation confirmed that the abundant π-π interaction from porphyrinic groups in the interpenetrated framework increased the electron delocalization/transfer and boosted the OL performance. This study opens a new avenue to enhance OL performance by the construction of interpenetrated structures and provides a new approach for the preparation of transparent and flexible MOF composites in nonlinear optical applications.

Interpenetration Control in Thorium Metal-Organic Frameworks: Structural Complexity toward Iodine Adsorption

The rational design and synthesis of metal-organic frameworks with well-controlled interpenetration have been active research areas of inquiry, particularly for porosity-related applications. Herein, we extend the use of the ligand steric modulation strategy to initiate the first study of the interpenetration control of thorium-based MOFs. The approximate "hardness" of the Th⁴⁺ cation, which was conjugated with aromatic substitutions and delicately modified synthetic conditions, allows for the crystallization of single crystals of seven new Th-MOFs with five distinct topologies. Solvothermal reactions of Th(NO₃)₄ with the triphenyl H₂TPDC ligand under variable conditions exclusively gave rise to an interpenetrated Th-MOF with a hex topology, namely Th-SINAP-16. Modifications of the ligand sterics with two pendant methyl groups to 2',5'-Me₂TPDC^2- and 2,2″-Me₂TPDC^2- afforded two noninterpenetrated UiO-68-type Th-MOFs (Th-SINAP-17 and Th-SINAP-20, respectively) with record-high pore volumes (74.8% and 75.3%, respectively) among all the thorium MOFs. Moreover, another four Th-MOFs Th-SINAP-n (n = 18, 19, 21, and 22) with three different topologies were obtained by a simple synthetic modulation. Notably, Th-SINAP-16 and Th-SINAP-21 represent the second rare examples of interpenetrated Th-MOFs reported to date. These findings revealed the unprecedented structural complexity and synthetic accessibility of Th-MOFs among all tetravalent metal containing MOFs. Such features make Th-MOFs as an ideal platform to elucidate the structure-property relationship for various applications, e.g. iodine adsorption.

Transient Catenation in a Zirconium-Based Metal-Organic Framework and Its Effect on Mechanical Stability and Sorption Properties

Interpenetration of two or more sublattices is common among many metal-organic frameworks (MOFs). Herein, we study the evolution of one zirconium cluster-based, 3,8-connected MOF from its non-interpenetrated (NU-1200) to interpenetrated (STA-26) isomer. We observe this transient catenation process indirectly using ensemble methods, such as nitrogen porosimetry and X-ray diffraction, and directly, using high-resolution transmission electron microscopy. The approach detailed here will serve as a template for other researchers to monitor the interpenetration of their MOF samples at the bulk and single-particle limits. We investigate the mechanical stability of both lattices experimentally by pressurized in situ X-ray diffraction and nanoindentation as well as computationally with density functional theory calculations. Both lines of study reveal that STA-26 is considerably more mechanically stable than NU-1200. We conclude this study by demonstrating the potential of these MOFs and their mixed phases for the capture of gaseous n-hexane, used as a structural mimic for the chemical warfare agent sulfur mustard gas.

Metal-Organic Frameworks Based on Group 3 and 4 Metals

Metal-organic frameworks (MOFs) based on group 3 and 4 metals are considered as the most promising MOFs for varying practical applications including water adsorption, carbon conversion, and biomedical applications. The relatively strong coordination bonds and versatile coordination modes within these MOFs endow the framework with high chemical stability, diverse structures and topologies, and interesting properties and functions. Herein, the significant progress made on this series of MOFs since 2018 is summarized and an update on the current status and future trends on the structural design of robust MOFs with high connectivity is provided. Cluster chemistry involving Y, lanthanides (Ln, from La to Lu), actinides (An, from Ac to Lr), Ti, and Zr is initially introduced. This is followed by a review of recently developed MOFs based on group 3 and 4 metals with their structures discussed based on the types of inorganic or organic building blocks. The novel properties and arising applications of these MOFs in catalysis, adsorption and separation, delivery, and sensing are highlighted. Overall, this review is expected to provide a timely summary on MOFs based on group 3 and 4 metals, which shall guide the future discovery and development of stable and functional MOFs for practical applications.

Two isostructural Ln3+-based heterometallic MOFs for the detection of nitro-aromatics and Cr2O72−

In/Eu-CBDA and In/Tb-CBDA can be used as potential chemical sensors for application in the detection of nitro-aromatics and Cr₂O₇²⁻.