Fluorescent Imprintable Hydrogels via Organic/Inorganic Supramolecular Coassembly

Thixotropic Hydrogels Based on Laponite® and Cucurbituril for Delivery of Lipophilic Drug Molecules

Nowadays the use of hydrogels for biomedical purposes is increasing because of their interesting features that allow the development of targeted drug delivery systems. Herein, hydrogel based on Laponite® (Lap) clay mineral as gelator and cucurbit[6]uril (CB[6]) molecules were synthetized for the delivery of flufenamic acid (FFA) for potential topical application. Firstly, the interaction between CB[6] and FFA was assessed by UV-vis spectroscopic measurements and molecular modeling calculations. Then, the obtained complex was used as filler for Lap hydrogel (Lap/CB[6]/FFA). The properties of the hydrogel in terms of viscosity and, self-repair abilities were investigated; its morphology was imaged by scanning electron and polarized optical microscopies. Furthermore, the changes in the hydrodynamic radii and in the colloidal stability of CB[6]/Lap mixture were investigated in terms of translational diffusion from dynamic light scattering and ζ-potential measurements. Finally, the kinetic in vitro release of FFA, from Lap/CB[6]/FFA hydrogel, was studied in a medium mimicking the pH of skin and the obtained results were discussed both by an experimental point of view and by molecular modeling calculations.

Chiral Polymer Dots Show Unexpected Versatility of Highly Ordered Self-Assembly into Chiroptical Liquid Crystals, Ultra-Thin Films, and Long-Ribbons

Compared to the organic counterparts, chiral self-assembly of nanomaterials shows persistency to kinetic factors such as solvent environments, and consequently, dynamic modulation of self-assembly and functions remains major challenge. Here, it is shown that alkylated, chiral polymer dots (c-PDs) give highly ordered self-assemblies with amplified chirality adaptive to solvent environments, and one-to-many hierarchical aggregation can be realized. The c-PDs tended to self-assemble into nanohelices with cubic packing in the solid state, which, thanks to the thermo-responsiveness, transformed into thermic liquid crystals upon heating. Cotton effects and circularly polarized luminescence evidenced the chirality transfer from central chirality to supramolecular chirality. At the air-water interface, the c-PDs are self-assembled into monolayers, which further stack into multiple layers with chirality transfer and highly ordered packing. In addition, undergoing a good/poor solvent exchange, the c-PDs afforded ultra-long microribbons up to a length scale of millimeters, which are constituted by the bilayer lamellar stacking. The versatile chiral self-assembly modalities with long-range ordered packing arrays of carbonized c-PDs via solvent strategy are realized. This feature is comparable to the organic species, although the c-PDs have no atomic precise structures. This work would surely expand the applications of quantum dot ordered self-assembly with adaptiveness to kinetic factors.

Carbon Dot-Based Hydrogels: Preparations, Properties, and Applications

Hydrogels have extremely high moisture content, which makes it very soft and excellently biocompatible. They have become an important soft material and have a wide range of applications in various fields such as biomedicine, bionic smart material, and electrochemistry. Carbon dot (CD)-based hydrogels are based on carbon dots (CDs) and auxiliary substances, forming a gel material with comprehensive properties of individual components. CDs embedding in hydrogels could not only solve their aggregation-caused quenching (ACQ) effect, but also manipulate the properties of hydrogels and even bring some novel properties, achieving a win-win situation. In this review, the preparation methods, formation mechanism, and properties of CD-based hydrogels, and their applications in biomedicine, sensing, adsorption, energy storage, and catalysis -are summarized. Finally, a brief discussion on future research directions of CD-based hydrogels will be given.

The Cyclobutanocucurbit[5-8]uril Family: Electronegative Cavities in Contrast to Classical Cucurbituril while the Electropositive Outer Surface Acts as a Crystal Packing Driver

The structural parameters for the cyclobutanoQ[5-8] family were determined through single crystal X-ray diffraction. It was found that the electropositive cyclobutano methylene protons (CH2) are important in forming interlinking crystal packing arrangements driven by the dipole-dipole interactions between these protons and the portal carbonyl O of a near neighbor. This type of interaction was observed across the whole family. Electrostatic potential maps also confirmed the electropositive nature of the cyclobutano CH2 but, more importantly, it was established that the cavities are electronegative in contrast to classical Q[5-8], which are near neutral.

A chemosensor-based chiral coassembly with switchable circularly polarized luminescence

Fluorescent chemosensors represent fast response to analytes with pronounced luminescent variations. They are promising as potential candidates in controlling luminescence and chiroptical activities of self-assembled chiral systems, which however have not been accomplished to date. We present a coassembled multiple component system that could respond to SO2 derivatives, giving rise to dynamic aggregation behaviors and switchable luminescence as well as circularly polarized luminescence (CPL). Cholesteryl-naphthalimide and coumarin derivatives coassemble into vesicles and nanohelices under the solvent strategy, behaving as energy transfer donor and accepter respectively. Energy transfer enables CPL transition from green to red depending on the molar fraction. After the addition of SO2 derivatives, hypochromic shifts occur to CPL due to the nucleophilic addition reaction to coumarin domain, hindering energy transfer and allow for the emergence of pristine luminescence. Here, we show a protocol to control over luminescence and chiroptical features of supramolecular chiral self-assemblies using fluorescent chemosensors.

Tetraphenylethene Functionalized Polyhedral Oligomeric Silsesquioxane Fluorescent Probe for Rapid and Selective Trifluralin Sensing in Vegetables and Fruits

A novel fluorescent probe was designed and synthesized from tetraphenylethene (TPE) and polyhedral oligomeric silsesquioxanes (POSS) via Heck-palladium catalyzed cross-coupling reaction. The as-synthesized TPE functionalized probe performed good solvent stability and selectively preconcentration capability towards target analyte due to its stable structure and the adsorption property. The morphology as well as the physical and chemical properties of the POSS@TPE were carefully characterized. The POSS@TPE was employed to develop an effective fluorescent probe for trifluralin, with a response range of 0.1-80 mg/kg and a detection limit of 0.102 mg/kg. The mixed mechanisms of inner-filter effect (IFE) and photoinduced electron transfer (PET) explain the selectivity of POSS@TPE. Rapid detection for trifluralin in tomato and celery has been achieved with recoveries between 99.4-120.7% (RSD≤3.4%), and the results were verified compared with GC-MS method.

Multiple Stimuli-Responsive Supramolecular Hydrogels Constructed by Decamethylcucurbit[5]uril-para-phenylenediamine Exclusion Complex

The hydrogels composed of decamethylcucurbit[5]uril (Me₁₀ Q[5]) and para-phenylenediamine (p-PDA) are first reported herein. They are the first Q[5]-based supramolecular hydrogels, the formation of which is driven by portal exclusion between Me₁₀ Q[5] and p-PDA. The composition, structure, and properties of the Me₁₀ Q[5]/p-PDA-based hydrogels are investigated by various techniques. Since the 1D supramolecular chain forms via portal exclusion between Me₁₀ Q[5] and p-PDA is the key to the formation of the hydrogels, any competitive species, such as metal ions, organic molecules, and amino acids, which can affect the portal exclusion, can change the behavior of the Me₁₀ Q[5]/p-PDA-based hydrogels. Hence, the hydrogels can be used for various applications. Importantly, the results may provide a new research direction for the preparation of Q[n]-based hydrogels via portal exclusion of Q[n]s with guests.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Large-scale visualization of the dispersion of liquid-exfoliated two-dimensional nanosheets

An ultrafast, non-invasive and large-scale visualization method has been developed to evaluate the dispersion of two-dimensional nanosheets in aqueous solution with a fluorescence microscope by the formation of excimers from the improvement of cation-π interactions.

Double-Network Heparin Dynamic Hydrogels: Dynagels as Anti-bacterial 3D Cell Culture Scaffolds

Double cross-linked dynamic hydrogels, dynagels, have been prepared through reversible imine bonds and supramolecular interactions, which showed good pH responsiveness, injectability, self-healing property and biocompatibility. With the further encapsulation of heparin, the obtained hydrogels exhibited good anti-bacterial activity and promotion effects for 3D cell culture.

Triple-Modulated Chiral Inversion of Co-Assembly System Based on Alanine Amphiphile and Cyanostilbene Derivative

The construction of chiroptical materials with controllable chirality is of special importance in biology and chemistry. Although tunable chirality can be realized in various systems, it remains a fundamental challenge to realize multimodulated chiral inversion. Herein, we report that chiral alanine derivative and fluorescent cyanostilbene derivative co-assemble to prepare supramolecular chiral systems, where twist nanofibers with totally inverted supramolecular chirality and circularly polarized luminescence are obtained through stoichiometric modulation. The supramolecular handedness can be inverted by means of altering the cooling rate and incorporating metal ions. The mechanism study reveals that the synergistic effect among hydrogen bonds, coordination interactions, and π-π stacking interactions contributes to the chirality inversion. This work establishes an effective strategy to precisely modulate supramolecular chirality in multiple ways, which shows great potential in developing smart chiroptical materials capable of achieving complex functionalities.

Aggregation-Induced Emission Fluorescent Gels: Current Trends and Future Perspectives

The development of fluorescent gels, if not the current focus, is at the center of recent efforts devoted to the invention of a new generation of gels. Fluorescent gels have numerous properties that are intrinsic to the gel structure, with additional light-emitting properties making them attractive for different applications. This review focuses on current studies associated with the development of fluorescent gels using aggregation-induced emission fluorophores (AIEgens) to ultimately suggest new directions for future research. Here, we discuss major drawbacks of the methodologies used frequently for the fabrication of fluorescent gels using traditional fluorophores compared to those using AIEgens. The fabrication strategies to develop AIE-based fluorescent gels, including physical mixing, soaking, self-assembly, noncovalent interactions, and permanent chemical reactions, are discussed thoroughly. New and recent findings on developing AIE-active gels are explained. Specifically, physically prepared AIE-based gels including supramolecular, ionic, and chemically prepared AIE-based gels are discussed. In addition, the intrinsic fluorescent properties of natural gels, known as clustering-triggered fluorescent gel, and new and recent relevant findings published in peer-reviewed journals are explained. This review also revealed the biomedical applications of AIE-based fluorescent hydrogels including drug delivery, biosensors, bioimaging, and tissue engineering. In conclusion, the current research situation and future directions are identified.

Functionalized naphthalenediimide based supramolecular charge-transfer complexes via self-assembly and their photophysical properties

Two new intermolecular CT complexes having large Stokes shift (>170 nm) and significant fluorescence life-time (∼1.55 ns) have been prepared and exploited for cell imaging application.

Stimulus-responsive luminescent hydrogels: Design and applications

Luminescent hydrogels are emerging soft materials with applications in photoelectric, biomedicine, sensors and actuators, which are fabricated via covalently conjugation of luminophors to hydrogelators or physical loading of luminescent organic/inorganic materials into hydrogel matrices. Due to the intrinsic stimulus-responsiveness for hydrogels such as thermo-, pH, ionic strength, light and redox, luminescent hydrogels could respond to external physical or chemical stimuli through varying the luminescent properties such as colors, fluorescent intensity and so on, affording diverse application potential in addition to the pristine individual hydrogels or luminescent materials. Based on the rapid development of such area, here we systematically summarize and discuss the design protocols, properties as well as the applications of stimulus-responsive luminescent hydrogels. Because of the stimuli-responsiveness, biocompatibility, injectable and controllability of luminescent hydrogels, they are widely used as functional smart materials. We illustrate the applications of luminescent hydrogels. The future developments about luminescent hydrogels are also presented.

Noncovalently Modulated Chiral Nanoclays for Circularly Polarized Luminescence Color Conversion

Incorporating chirality to 2D architectures could greatly expand their applications due to their merits of large surface area and fine dispersity in solution compared with 1D or 3D materials, which however remains to have considerable challenges so far. In this work, we present the successful incorporation of chirality at different levels with 2D clay nanosheets where luminescent and circularly polarized luminescence color conversion could be realized. N-terminal π-conjugated chiral amino acids were utilized as chiral species to induce the formation of chiral environments on an aminoclay surface via electrostatic attraction. The noncovalently modified chiral nanoclay sheets shall undergo self-assembly into 1D twisted fibers, showing emerged nanoscale chirality. Such a noncovalently modified chiral surface of clay provided a matrix to accommodate guest molecules, whereby an electron-deficient compound was effectively trapped through charge-transfer interaction. A synergistic effect was observed in such ternary assemblies, allowing for the emergence of luminescent and circularly polarized luminescence color conversion from blue to red with a high dissymmetry g-factor up to 2.1 × 10^-2. This study offers an effective and facile manner to synthesize chiral mineral 2D materials with fine chiroptical responses.