Covalent Organic Frameworks: Emerging Organic Solid Materials for Energy and Electrochemical Applications

Asymmetric catalytic synthesis of chiral covalent organic framework composite (S)-DTP-COF@SiO2 for HPLC enantioseparations by normal-phase and reversed-phase chromatographic modes

A novel CCOF core-shell composite material (S)-DTP-COF@SiO2 was prepared via asymmetric catalytic and in situ growth strategy. The prepared (S)-DTP-COF@SiO2 was utilized as separation medium for HPLC enantioseparation using normal-phase and reversed-phase chromatographic modes, which displays excellent chiral separation performance for alcohols, esters, ketones, and epoxides, etc. Compared with chiral commercial chromatographic columns (Chiralpak AD-H and Chiralcel OD-H columns) and some previously reported chiral CCOF@SiO2 (CC-MP CCTF@SiO2 and MDI-β-CD-modified COF@SiO2)-packed columns, there are 4, 3, 13, and 15 tested racemic compounds that could not be resolved on the Chiralpak AD-H column, Chiralcel OD-H column, CC-MP CCTF@SiO2 column, and MDI-β-CD-modified COF@SiO2 column, respectively, which indicates that the resolution effect of (S)-DTP-COF@SiO2-packed column can be complementary to the other ones. The effects of the analyte mass, column temperature, and mobile phase composition on the enantiomeric separation were investigated. The chiral column exhibits good reproducibility after multiple consecutive injections. The RSDs (n = 5) of the peak area and retention time were less than 1.5% for repetitive separation of 2-methoxy-2-phenylethanol and 1-phenyl-1-pentanol. The chiral core-shell composite (S)-DTP-COF@SiO2 exhibited good enantiomeric separation performance, which not only demonstrates its potential as a novel CSP material in HPLC but also expands the range of applications for chiral COFs.

Unveiling the Role of Cationic Pyridine Sites in Covalent Triazine Framework for Boosting Zinc-Iodine Batteries Performance

Rechargeable Zinc-iodine batteries (ZIBs) are gaining attention as energy storage devices due to their high energy density, low-cost, and inherent safety. However, the poor cycling performance of these batteries always arises from the severe leakage and shuttle effect of polyiodides (I3 - and I5 -). Herein, a novel cationic pyridine-rich covalent triazine framework (CCTF-TPMB) is developed to capture and confine iodine (I2) species via strong electrostatic interaction, making it an attractive host for I2 in ZIBs. The as-fabricated ZIBs with I2 loaded CCTF-TPMB (I2@CCTF-TPMB) cathode achieve a large specific capacity of 243 mAh g-1 at 0.2 A g-1 and an exceptionally stable cyclic performance, retaining 93.9% of its capacity over 30 000 cycles at 5 A g-1. The excellent electrochemical performance of the ZIBs can be attributed to the pyridine-rich cationic sites of CCTF-TPMB, which effectively suppress the leakage and shuttle of polyiodides, while also accelerating the conversion reaction of I2 species. Combined in situ Raman and UV-vis analysis, along with theoretical calculations, clearly reveal the critical role played by pyridine-rich cationic sites in boosting the ZIBs performances. This work opens up a promising pathway for designing advanced I2 cathode materials toward next-generation ZIBs and beyond.

Yolk shell structured YS-Si@N-doped carbon derived from covalent organic frameworks for enhanced lithium storage

Silicon (Si) has ultra-high theoretical capacity (4200 mAh g-1) and accordingly is widely studied as anode materials for lithium-ion batteries (LIBs). However, its huge volume expansion during charging/discharging is a fatal challenge. The preparation of Si-based composite materials with yolk shell structure is the key to solving the Si volume expansion. Here, N-doped carbon-coated Si nanoparticles (SiNPs) nanocomposites (YS-Si@NC-60) with yolk shell structure derived from covalent organic frameworks (COFs) was prepared. N-doped carbon shells derived from COFs not only maintain the well-ordered nanosized pores of COFs, which facilitates the transport of Li+ to contact with internal SiNPs, but also provide more extra active sites for Li+ storage. Most importantly, the internal void can effectively alleviate the damage effect of SiNPs volume expansion. The obtained YS-Si@NC-60 as a LIBs anode show high cyclic stability and Li+ storage performances. At 0.1 A g-1, the capacity is 1446 mAh g-1 after 110 cycles, and initial coulomb efficiency is as high as 82.2 %. The excellent performance can be attributed to the unique yolk shell structure. This simple and template-free strategy provides a new idea for preparing Si-C nanocomposites with yolk shell structure.

3D Covalent Organic Frameworks from Design, Synthesis to Applications in Optoelectronics

Covalent organic frameworks (COFs), a new class of crystalline materials connected by covalent bonds, have been developed rapidly in the past decades. However, the research on COFs is mainly focused on two-dimensional (2D) COFs, and the research on three-dimensional (3D) COFs is still in the initial stage. In 2D COFs, the covalent bonds exist only in the 2D flakes and can form 1D channels, which hinder the charge transport to some extent. In contrast, 3D COFs have a more complex pore structure and thus exhibit higher specific surface area and richer active sites, which greatly enhance the 3D charge carrier transport. Therefore, compared to 2D COFs, 3D COFs have stronger applicability in energy storage and conversion, sensing, and optoelectronics. In this review, it is first introduced the design principles for 3D COFs, and in particular summarize the development of conjugated building blocks in 3D COFs, with a special focus on their application in optoelectronics. Subsequently, the preparation of 3D COF powders and thin films and methods to improve the stability and functionalization of 3D COFs are summarized. Moreover, the applications of 3D COFs in electronics are outlined. Finally, conclusions and future research directions for 3D COFs are presented.

Tetrazine-Linked Covalent Organic Frameworks With Acid Sensing and Photocatalytic Activity

The first synthesis and comprehensive characterization of two vinyl tetrazine-linked covalent organic frameworks (COF), TA-COF-1 and TA-COF-2, are reported. These materials exhibit high crystallinity and high specific surface areas of 1323 and 1114 m2 g-1. The COFs demonstrate favorable band positions and narrow band gaps suitable for light-driven applications. These advantages enable TA-COFs to act as reusable metal-free photocatalysts in the arylboronic acids oxidation and light-induced coupling of benzylamines. In addition, these TA-COFs show acid sensing capabilities, exhibiting visible and reversible color changes upon exposure to HCl solution, HCl vapor, and NH3 vapor. Further, the TA-COFs outperform a wide range of previously reported COF photocathodes. The tetrazine linker in the COF skeleton represents a significant advancement in the field of COF synthesis, enhancing the separation efficiency of charge carriers during the photoreaction and contributing to their photocathodic properties. TA-COFs can also degrade 5-nitro-1,2,4-triazol-3-one (NTO), an insensitive explosive present in industrial wastewater, in 20 min in a sunlight-driven photocatalytic process; thus, revealing dual functionality of the protonated TA-COFs as both photodegradation and Brønsted acid catalysts. This pioneering work opens new avenues for harnessing the potential of the tetrazine linker in COF-based materials, facilitating advances in catalysis, sensing, and other related fields.

Rapid and in-situ preparation COFs coated capillary by adsorption method for the separation and determination of phthalate ester using CEC

As a novel class of stationary phase materials, covalent organic frameworks (COFs) have shown great promise in open-tubular capillary electrochromatography. However, the current preparation of COFs coating capillaries heavily relies on tedious and time-consuming covalent bond methods. In this work, a novel, simple and rapid adsorption method was developed for fabrication of TPB-DMTP COF (fabricated from 1,3,5-tris(4-aminophenyl)benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP)) coated capillary. Due to the crystallization process of the COF is greatly shortened because pre-modification capillary does not require silane coupling agent, this method enables the rapid preparation of COFs-coated capillaries. The organic molecular building units only need 25 min to form a stable COFs coating on the inner wall of a capillary by this method. To our knowledge, this is the shortest method for preparing COFs coated capillary up to now. The performance of the TPB-DMTP COF coated capillary was evaluated by using phthalate esters as model analytes. The results demonstrated that the TPB-DMTP COF coated capillary has excellent repeatability and stability. The relative standard deviations (RSDs) of the analyte's retention time of intra-day, inter-day and column-to-column were in the range of 0.05 %-0.27 %, 0.31 %-0.63 % and 0.31 %-0.88 %, respectively. And, no significant changes were observed in separation efficiency and retention time after over 200 runs. Finally, the TPB-DMTP COF coated capillary was applied for the determination of phthalates in marketed plastic bag and the recovery ranged from 88.0 % to 114.0 %.

Imine-linked covalent organic framework with high crystallinity for constructing sensitive purine bases electrochemical sensor

In this work, a covalent organic framework (TADM-COF) with high crystallinity and large specific surface area (2597 m2 g-1) has been successfully synthesized using 1,3,5-(4-aminophenyl) benzene (TAPB) and 2,5-dimethoxy-p-phenyldiformaldehyde (DMTP). The COF was grown in situ on oxide particles to form core-shell nanocomposites (SiO2@TADM COF, Fe3O4@TADM COF and Co3O4@TADM COF) to realize its function as a shell material. Among them, the Co3O4@TADM COF with the highest electrochemical response to purine bases was further cross-linked with multi-walled carbon nanotubes (MWCNT) to construct a novel electrochemical sensor (Co3O4@TADM COF/MWCNT/GCE) for detection of purine bases. In this nanocomposite, Co3O4 possesses rich catalytic active sites, MWCNT ensures superior electrical conductivity and COF provides a stable environment for electrocatalytic reactions as the shell. At the same time, regular pore structure of the COFs also offers smooth channels for the transfer of analytes to the catalytic site. The synergistic effect among the three components showed remarkable sensing performance for the simultaneous detection of guanine (G) and adenine (A) with a wide linear range of 0.6-180 μM and low limits of detection (LODs) of 0.020 μM for G and 0.024 μM for A (S/N = 3), respectively. The developed sensor platform was also successfully applied in the detection of purine bases in thermally denatured herring DNA extract. The work provided a general strategy for amplifying signal of COF and its composite in the electrochemical sensing.

High Sodium Ion Storage by Multifunctional Covalent Organic Frameworks for Sustainable Sodium Batteries

Rechargeable sodium batteries hold great promise for circumventing the increasing demand for lithium-ion batteries (LIBs) and the limited supply of lithium. However, efficient sodium ion storage remains a great impediment in this field. In this study, we report the designed synthesis of a multifunctional two-dimensional covalent organic framework featuring hexaazatrinaphthalene cores linked by imidazole moieties and demonstrate its effective performance in sodium ion storage. Benzimidazole-linked covalent organic framework (BCOF-1) was synthesized by a condensation reaction between hexaazatrinaphthalenehexamine (HATNHA) and terephthalaldehyde (TA) and exhibited a high theoretical specific capacity of 392 mA h g-1. BCOF-1 crystallizes, forming eclipsed AA stacking and mesoporous hexagonal one-dimensional channels with high surface area (840 m2 g-1), facilitating fast ionic mobility and charge transfer and enabling high-rate capability at high current rates. BCOF-1 exhibits pseudocapacitive-like behavior with a high specific capacity of 387 mA h g-1, an energy density of 302 W h kg-1 at 0.1 C, and a power density of 682 W kg-1 at 5 C. Our results demonstrate that redox-active COFs have the desired structural and electronic merits to advance the use of organic electrodes in sodium-ion storage toward sustainable and efficient batteries.

Flexible Linker-Based Triazine-Functionalized 2D Covalent Organic Frameworks for Supercapacitor and Gas Sorption Applications

Covalent organic frameworks (COFs) having a large surface area, porosity, and substantial amounts of heteroatom content are recognized as the ideal class of materials for energy storage and gas sorption applications. In this work, we have synthesized four different porous COF materials by the polycondensation of a heteroatom-rich flexible triazine-based trialdehyde linker, namely 2,4,6-tris(4-formylphenoxy)-1,3,5-triazine (TPT-CHO), with four different triamine linkers. Triamine linkers were chosen based on differences in size, symmetry, planarity, and heteroatom content, leading to the synthesis of four different COF materials named IITR-COF-1, IITR-COF-2, IITR-COF-3, and IITR-COF-4. IITR-COF-1, synthesized within 24 h from the most planar and largest amine monomer, exhibited the largest Brunauer-Emmett-Teller (BET) surface area of 2830 m2 g-1, superior crystallinity, and remarkable reproducibility compared to the other COFs. All of the synthesized COFs were explored for energy and gas storage applications. It is shown that the surface area and redox-active triazene rings in the materials have a profound effect on energy and gas storage enhancement. In a three-electrode setup, IITR-COF-1 achieved an electrochemical stability potential window (ESPW) of 2.0 V, demonstrating a high specific capacitance of 182.6 F g-1 with energy and power densities of 101.5 Wh kg-1 and 298.3 W kg-1, respectively, at a current density of 0.3 A g-1 in 0.5 M K2SO4 (aq) with long-term durability. The symmetric supercapacitor of IITR-COF-1//IITR-COF-1 exhibited a notable specific capacitance of 30.5 F g-1 and an energy density of 17.0 Wh kg-1 at a current density of 0.12 A g-1. At the same time, it demonstrated 111.3% retention of its initial specific capacitance after 10k charge-discharge cycles. Moreover, it exhibited exceptional CO2 capture capacity of 25.90 and 10.10 wt % at 273 and 298 K, respectively, with 2.1 wt % of H2 storage capacity at 77 K and 1 bar.

A Stimuli-Responsive Dual-Emitting Covalent Organic Framework Shows Selective Sensing of Highly Corrosive Acidic Media via Fluorescence Turn-On Signal with White Light Emission

Luminescent covalent organic frameworks (LCOFs) have been employed as platforms for sensing analytes. Judicial incorporation of appropriate functional units inside the framework leads to the different electronic states in the presence of external stimuli, e.g., temperature, pH, etc. We report herein a new COF (TPEPy) as a solid-state acid sensor specific for the highly acidic environments that range from pH ∼0.5 to ∼3.0. This COF shows a protonation-induced reversible color change from bright yellow to deep red upon decreasing the pH from 3 to 0.5 and vice versa. No visual color change was, however, observed above pH 3.0. Photoluminescence (PL) studies show that the intrinsic emission peak of the TPEPy COF at 530 nm is shifted to 420 nm owing to the N-protonation of the imine nitrogen of COF within this pH range. Extensive studies demonstrate that the protonation behavior of the COF is counterion dependent. This was revealed when different acids, e.g., HCl, HNO3, HBr, and HI, were employed. The intensity of the proton-induced emission peak at 420 nm depends significantly upon the counterions with the order of HCl > HNO3 > HBr > HI. These anions interact with the protonated TPEPy COF by cation-anion and H-bonding interactions. Further, the pristine COF showed near white light emission at a particular pH of 2.5 (CIE coordinates 0.27, 0.32). From the PL spectrophotometric titrations, the deprotonation pKa was experimentally found to be 1.8 ± 0.02 for the TPEPy COF. The sensor reported herein is reversible, reusable, and regenerable and is useful for assessing pH fluctuations within a strongly acidic range via digital signaling.

Aqueous Sol-Gel Synthesis and Shaping of Covalent Organic Frameworks

The intrinsic fragility and insoluble nature of covalent organic frameworks (COFs) have strongly impeded their processability for practical applications. Herein, an aqueous-based sol-gel synthetic strategy is reported for the synthesis and shaping of COFs with task-specific applications that satisfy the principles of green chemistry for gram-scale production of crystalline materials. Our successful approach involves three pivotal aspects: the "prodrug mimic" design of water-soluble monomers, the utilization of hydrolyzable bonds, and the manipulation of reaction kinetics. The generality of the method is demonstrated by the successful preparation of representative high-surface area two-dimensional (2D) COFs with several commonly used amines. By virtue of this strategy, a COF colloidal dispersion is achieved and can be formulated into processable fluids, structured films, and COF monoliths. Remarkably, the obtained lightweight (∼0.020 g cm-3) and robust aerogels displayed outstanding adsorption capacity (exceeding 57 times its own weight) toward a variety of organic solvents and exhibited superior thermal insulating properties compared to the widely used sponge and cotton. This work demonstrates a versatile strategy for the synthesis and shaping of processable COF materials in water that will contribute to the development of COF monoliths for advanced applications.

Covalent Organic Frameworks in Aqueous Zinc-Ion Batteries

The development and utilization of green renewable energy are imperative with the aggravation of environmental pollution and energy crisis. In recent years, the exploration of electrochemical energy storage systems has gradually become a research hotspot in energy. Among them, aqueous zinc-ion batteries (ZIBs) have progressively developed into highly competitive and efficient energy storage devices owing to their inherent safety, natural abundance, and higher theoretical capacity. However, the practical application of ZIBs suffers from the limitation of challenges such as the absence of proper cathode materials and the unavoidable zinc dendrites and side reactions of Zn anode. Covalent organic frameworks (COFs) are an attractive class of electrode materials due to their inherent advantages, like structural designability, high stability, and ordered-open channels, bestowing them with great potential to overcome the problems of ZIBs. In this review, we concentrate on the discussion of designed strategies of COFs applied to ZIBs. Furthermore, the methods of using COFs to solve the challenging problems of cathode development, anode modification, and electrolyte optimization for ZIBs are summarized. Finally, the existing difficulties, solution measures, and prospects of COFs for ZIBs applications are discussed. Our commentary hopes to serve as a valuable reference for developing COFs-based ZIBs.

Modulated Connection Modes of Redox Units in Molecular Junction Covalent Organic Frameworks for Artificial Photosynthetic Overall Reaction

The precise tuning of components, spatial orientations, or connection modes for redox units is vital for gaining deep insight into efficient artificial photosynthetic overall reaction, yet it is still hard achieve for heterojunction photocatalysts. Here, we have developed a series of redox molecular junction covalent organic frameworks (COFs) (M-TTCOF-Zn, M = Bi, Tri, and Tetra) for artificial photosynthetic overall reaction. The covalent connection between TAPP-Zn and multidentate TTF endows various connection modes between water photo-oxidation (multidentate TTF) and CO2 photoreduction (TAPP-Zn) centers that can serve as desired platforms to study the possible interactions between redox centers. Notably, Bi-TTCOF-Zn exhibits a high CO production rate of 11.56 μmol g-1 h-1 (selectivity, ∼100%), which is more than 2 and 6 times higher than those of Tri-TTCOF-Zn and Tetra-TTCOF-Zn, respectively. As revealed by theoretical calculations, Bi-TTCOF-Zn facilitates a more uniform distribution of energy-level orbitals, faster charge transfer, and stronger *OH adsorption/stabilization ability than those of Tri-TTCOF-Zn and Tetra-TTCOF-Zn.

Post-synthetic modifications of covalent organic frameworks (COFs) for diverse applications

Covalent organic frameworks (COFs) are porous and crystalline organic polymers, which have found usage in various fields. These frameworks are tailorable through the introduction of diverse functionalities into the platform. Indeed, functionality plays a key role in their different applications. However, sometimes functional groups are not compatible with reaction conditions or can compete and interfere with other groups of monomers in the direct synthetic method. Also, pre-synthesis of bulky moieties in COFs can negatively affect crystal formation. To avoid these problems a post-synthetic modification (PSM) approach is a helpful tactic. Also, with the assistance of this strategy porous size can be tunable and stability can be improved without considerable effect on the crystallite. In addition, conductivity, hydrophobicity/ hydrophilicity, and chirality are among the features that can be reformed with this method. In this review, different types of PSM strategies based on recent articles have been divided into four categories: (i) post-functionalization, (ii) post-metalation, (iii) chemical locking, and (iv) host-guest post-modifications. Post-functionalization and chemical locking methods are based on covalent bond formation while in post-metalation and host-guest post-modifications, non-covalent bonds are formed. Also, the potential of these post-modified COFs in energy storage and conversion (lithium-sulfur batteries, hydrogen storage, proton-exchange membrane fuel cells, and water splitting), heterogeneous catalysts, food safety evaluation, gas separation, environmental domains (greenhouse gas capture, radioactive element uptake, and water remediation), and biological applications (drug delivery, biosensors, biomarker capture, chiral column chromatography, and solid-state smart nanochannels) have been discussed.

Polypyrene Porous Organic Framework for Efficiently Capturing Electron Specialty Gases

The polypyrene polymer with an extended π-conjugated skeleton is attractive for perfluorinated electron specialty gas (F-gas) capture as the high electronegativity of fluorine atoms makes F-gases strongly electronegative gases. Herein, a polypyrene porous organic framework (termed as Ppy-POF) with an extended π-conjugated structure and excellent acid resistance was constructed. Systematic studies have shown that the abundant π-conjugated structures and gradient electric field distribution in Ppy-POF can endow it exceptional adsorption selectivity for high polarizable F-gases and xenon (Xe), which has been collaboratively confirmed by single-component gas adsorption experiments, time-dependent adsorption rate tests, dynamic breakthrough experiments, etc. Electrostatic potential distribution and charge density difference based on Grand Canonical Monte Carlo simulations and density functional theory calculations demonstrate that the selective adsorption of F-gases and Xe in Ppy-POF is attributed to the strong charge-transfer effect and polarization effect between Ppy-POF and gases. These results manifest that the POF with an extended π-conjugated structure and gradient electric field distribution has great potential in efficiently capturing electron specialty gases.

Organic Cathode Materials for Rechargeable Aluminum-Ion Batteries

Organic electrode materials (OEMs) have shown enormous potential in ion batteries because of their varied structural components and adaptable construction. As a brand-new energy-storage device, rechargeable aluminum-ion batteries (RAIBs) have also received a lot of attention due to their high safety and low cost. OEMs are expected to stand out among many traditional RAIB cathode materials. However, how to improve the electrochemical performance of OEMs in RAIBs on a laboratory scale is still challenging. This work reviews and discusses the uses of conductive polymers, carbonyl compounds, imine polymers, polycyclic aromatic hydrocarbons, organic frameworks, and other organic materials as the cathodes of RAIBs, as well as energy-storage mechanisms and research progress. It is hoped that this Review can provide the design guidelines for organic cathode materials with high capacity and great stability used in aluminum-organic batteries and develop more efficient organic energy storage cathodes.

2D Covalent Organic Frameworks Based on Heteroacene Units

Covalent organic frameworks (COFs) are a unique new class of porous materials that arrange building units into periodic ordered frameworks through strong covalent bonds. Accompanied with structural rigidity and well-defined geometry, heteroacene-based COFs have natural advantages in constructing COFs with high stability and crystallinity. Heteroacene-based COFs usually have high physical and chemical properties, and their extended π-conjugation also leads to relatively low energy gap, effectively promoting π-electron delocalization between network units. Owing to excellent electron-withdrawing or -donating ability, heteroacene units have incomparable advantages in the preparation of donor-acceptor type COFs. Therefore, the physicochemical robust and fully conjugated heteroacene-based COFs solve the problem of traditional COFs lacking π-π interaction and chemical stability. In recent years, significant breakthroughs are made in this field, the choice of various linking modes and building blocks has fundamentally ensured the final applications of COFs. It is of great significance to summarize the heteroacene-based COFs for improving its complexity and controllability. This review first introduces the linkages in heteroacene-based COFs, including reversible and irreversible linkages. Subsequently, some representative building blocks are summarized, and their related applications are especially emphasized. Finally, conclusion and perspectives for future research on heteroacene-based COFs are presented.

Two dimensional architectures of graphitic carbon nitride with the substitution of heteroatoms for bifunctional electrochemical detection of nilutamide

The exploration of graphitic carbon nitride (g-C₃N₄), a two-dimensional (2D) metal-free polymer semiconducting material, is largely discussed due to its large specific surface area, high electrical conductivity, thermal stability, and adaptable electronic structure. The adaption of sulfur (S) and phosphorous (P) atoms into the layers of g-C₃N₄ increases the electrochemical performance of detecting nilutamide (NT). The aggregation severity can be decreased by integrating S/P into g-C₃N₄, thereby improving surface area and electrical conductance. The g-C₃N₄, S/gC₃N₄, P/g-C₃N₄, and S/P/g-C₃N₄ were studied with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Fourier transform infrared (FTIR), Ultraviolet visible spectroscopy (UV), Thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The well-assigned S/P/g-C₃N₄ exhibited a good crystalline structure with more active sites for improved electron transfer toward NT detection. Both differential pulse voltammetry (DPV) and amperometry (IT) was studied for NT detection. The electrochemical studies were done with a linear range of 0.019-1.17 μM to 5.36-1891.98 μM in DPV and 0.01 μM-158.3 μM in IT technique. The attained limit of detection in DPV analysis was 3.2 nM and with IT analysis 2.4 nM. The nanocomposite S/P/g-C₃N₄ shows good selectivity towards NT. The fabricated electrode showed excellent repeatability, reproducibility, and stability, with a significant recovery range in real sample analysis.

Phenediamine bridging phthalocyanine-based covalent organic framework polymers used as anode materials for lithium-ion batteries

In this study, phenediamine bridging phthalocyanine-based covalent organic framework materials (CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA) with increasingly-widening pore sizes are prepared by reacting cobalt octacarboxylate phthalocyanine with p-phenylenediamine (PDA), benzidine (BDA) and 4,4''-diamino-p-terphenyl (TDA), respectively. The effects of frame size on the morphology structure and its electrochemical properties were explored. X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and transmission electron microscopy (TEM) images show that the pore sizes of the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA are about 1.7 nm, 2.0 nm and 2.3 nm, respectively, which are close to the simulated results after geometric conformation optimization using Material Studio software. In addition, the specific surface areas of CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA are 62, 81 and 137 m² g^-1, respectively. With increase in the frame size, the specific surface area of the corresponding material increases, which is bound to produce different electrochemical behaviors. Consequently, the initial capacities of the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA electrodes in lithium-ion batteries (LIBs) are 204, 251 and 382 mA h g^-1, respectively. As the charge and discharge processes continue, the active points in the electrode material are continuously activated, leading to a continuous increase in charge and discharge capacities. After 300 cycles, the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA electrodes exhibit capacities of 519, 680 and 826 mA h g^-1, respectively, and after 600 cycles, the capacities are maintained at 602, 701 and 865 mA h g^-1, respectively, with a stable capacity retention rate at a current density of 100 mA g^-1. The results show that the large-size frame structure materials have a larger specific surface area and more favorable lithium ion transmission channels, which produce greater active point utilization and smaller charge transmission impedance, thus showing larger charge and discharge capacity and superior rate capability. This study fully confirms that frame size is a key factor affecting the properties of organic frame electrodes, providing design ideas for the development of high-performance organic frame electrode materials.

Design strategies of covalent organic framework-based electrodes for supercapacitor application

Supercapacitors (SCs) have been recognized as a promising electrochemical energy storage (EES) device, thanks to their high-power density, long lifespan, fast charge-discharge capability, and eco-friendliness. The breakthrough of electrode materials that determine the electrochemical performance of SCs is urgently desired. Covalent organic frameworks (COFs), an emerging and burgeoning class of crystalline porous polymeric materials, have been found to have huge potential for application in EES devices by virtue of their unique properties including atomically adjustable structures, robust and tunable skeletons, well-defined and open channels, high surface areas, etc. In this feature article, we aim at summarizing the design strategies of COF-based electrode materials for SCs based on the representative advances. The current challenges and future perspectives of COFs for SC application are highlighted as well.

Supramolecular Engineering of Cathode Materials for Aqueous Zinc-ion Energy Storage Devices: Novel Benzothiadiazole Functionalized Two-Dimensional Olefin-Linked COFs

Two-dimensional covalent organic frameworks (COFs) have emerged as promising materials for energy storage applications exhibiting enhanced electrochemical performance. While most of the reported organic cathode materials for zinc-ion batteries use carbonyl groups as electrochemically-active sites, their high hydrophilicity in aqueous electrolytes represents a critical drawback. Herein, we report a novel and structurally robust olefin-linked COF-TMT-BT synthesized via the aldol condensation between 2,4,6-trimethyl-1,3,5-triazine (TMT) and 4,4'-(benzothiadiazole-4,7-diyl)dibenzaldehyde (BT), where benzothiadiazole units are explored as novel electrochemically-active groups. Our COF-TMT-BT exhibits an outstanding Zn²⁺ storage capability, delivering a state-of-the-art capacity of 283.5 mAh g^-1 at 0.1 A g^-1 . Computational and experimental analyses reveal that the charge-storage mechanism in COF-TMT-BT electrodes is based on the supramolecularly engineered and reversible Zn²⁺ coordination by the benzothiadiazole units.

COF-Based Electrodes with Vertically Supported Tentacle Array for Ultrahigh Stability Flexible Energy Storage

As an emerging porous crystal polymer, covalent organic frameworks (COFs) possess unique characteristics, such as high porosity, excellent stability, diverse topologies, designable open channels, and functional tunability. However, limited by the solid powder form, most COFs display low active site utilization and weak binding force with the current collector. In this pioneering research, we integrate redox-active COFs onto carbon fiber surfaces (AC-COFs) via strong covalent bridging. The 2,6-diaminoanthraquinone (DAAQ) pillars embedded on the carbon fiber surface are the key to precisely controlling the growth direction of COFs. The obtained tentacle-like array vertically supported on the surface of the carbon fiber can effectively induce charge transfer and prevent COFs from aggregating/collapsing. The strong covalent coupling and increase of accessible active sites contributed to the high specific capacitance of AC-COFs electrode (1034 mF cm^-2). In addition, the COF-based flexible electrode retains an initial capacitance of 98% after 20000 charge-discharge cycles. The flexible all-solid-state symmetric supercapacitor is assembled by PVA/H₂SO₄ gel electrolyte with an areal capacitance of 715 mF cm^-2. Besides, a red LED can be easily powered by three-bending AC-COFs//AC-COFs devices. The innovative synthesis strategy opens up new opportunities to develop high-performance flexible energy storage devices based on COFs.

Activated Ni-O-Ir Enhanced Electron Transfer for Boosting Oxygen Evolution Reaction Activity of LaNi1-x Irx O3

Tuning the structure of the active center of catalysts to atomic level provides the most efficient utilization of the active component, which plays an especially important role for precious metals. In this study, the liquid phase ion exchange method is used to introduce atomic Ir into LaNiO₃ perovskite oxide, which shows excellent catalytic performance in the oxygen evolution reaction (OER). The catalyst, LaNi_0.96 Ir_0.04 O₃ , with the optimal concentration of Ir, displays an overpotential of just 280 mV at 10 mA cm^-2 . The introduced Ir enriches the surface electron density significantly, which not only improves site-to-site electron transfer between O and Ni sites but also allows stable adsorption of the intermediates. The results of cyclic voltammetry tests reveal the superior overpotential and remarkable efficiency of the OER process because of the strong interactions in Ni-O-Ir. Moreover, the Ir atom inhibits the participation of a lattice oxygen oxidation mechanism (LOM) in LaNiO₃ that guarantees the stability of the catalyst in alkaline conditions. It is anticipated that this work will be instrumental for the preparation and study of a broad range of atomic metal-doped perovskite oxides for water splitting.

High Performance and Long-cycle Life Rechargeable Aluminum Ion Battery: Recent Progress, Perspectives and Challenges

The rising energy crisis and environmental concerns caused by fossil fuels have accelerated the deployment of renewable and sustainable energy sources and storage systems. As a result of immense progress in the field, cost-effective, high-performance, and long-life rechargeable batteries are imperative to meet the current and future demands for sustainable energy sources. Currently, lithium-ion batteries are widely used, but limited lithium (Li) resources have caused price spikes, threatening progress toward cleaner energy sources. Therefore, post-Li, batteries that utilize highly abundant materials leading to cost-effective energy storage solutions while offering desirable performance characteristics are urgently needed. Aluminum-ion battery (AIB) is an attractive concept that uses highly abundant aluminum while offering a high theoretical gravimetric and volumetric capacity of 2980 mAh g^-1 and 8046 mAh cm^-3 , respectively. As a result, intensified efforts have been made in recent years to utilize numerous electrolytes, anodes, and cathode materials to improve the electrochemical performance of AIBs, and potentially create high-performance, low-cost, and safe energy storage devices. Herein, recent progress in the electrolyte, anode, and cathode active materials and their utilization in AIBs and their related characteristics are summarized. Finally, the main challenges facing AIBs along with future directions are highlighted.

Insight into the Nanotribological Mechanism of Two-Dimensional Covalent Organic Frameworks

Two-dimensional (2D) materials are promising in reducing friction-induced energy loss and wear in automotive and electronics industries because of their superior tribological performance. As a kind of organic 2D materials, the structure and functionality of covalent organic frameworks (COFs) are much easier to tailor compared to other inorganic 2D materials, which expand their potential application in a Micro-Electro-Mechanical System (MEMS). In this manuscript, several kinds of COFs are synthesized and characterized on the surface of highly oriented pyrolytic graphite (HOPG) to investigate the nanotribological mechanism of organic 2D materials. It is surprisingly revealed that the friction coefficients of surface COFs are positively correlated with the pore sizes of honeycomb networks. The COFs with smaller pores would have a smoother potential energy surface and exhibit a lower friction coefficient. Besides, the porous structures of surface COFs make them good candidates to be host templates. The host-guest assembly structures are successfully constructed after introducing coronene molecules, and these host-guest systems display higher friction coefficients because the assembly structure of the guest molecules would be perturbed during the friction process and bring additional slip energy barriers, but the capacity of COFs to form composite assembly with functional guest molecules greatly promotes their further application in the MEMS.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Ratiometric immunosensor with DNA tetrahedron nanostructure as high-performance carrier of reference signal and its applications in selective phoxim determination for vegetables

A ratiometric electrochemical immunosensor, based on DNA tetrahedron nanostructure (DTNS), is introduced for vegetable phoxim determination. DTNS spontaneously adheres onto gold-nanoparticle-modified electrode and forms stable three-dimensional structure, providing plenty of binding sites to the built-in reference, methylene blue (MB). Monoclonal antibody (m-Ab) is vertically linked onto DTNS vertex, selectively responses antigenic phoxim, and promotes the target signal of I_PHO. Thus, a ratiometric indicator, I_PHO/I_MB, is sensibly established with the target signal (I_PHO) and the reference signal (I_MB). Modifications, mechanisms and advances of the proposed method are subsequently examined with morphological methods and electrochemical experiments. This method brings considerable advances in analytical behaviors. The ratiometric signal presents better performance than solo system in repeatability and long-time stability. As-fabricated sensor presents wide dynamic range as 0.1∼30 μg/L, and limit of detection is well defined as 0.003 μg/L (S/N = 3). Finally, this method is verified with real-vegetable-sample analysis, certified HPLC and recovery test.

Electrochemical (Bio)Sensors Based on Covalent Organic Frameworks (COFs)

Covalent organic frameworks (COFs) are defined as crystalline organic polymers with programmable topological architectures using properly predesigned building blocks precursors. Since the development of the first COF in 2005, many works are emerging using this kind of material for different applications, such as the development of electrochemical sensors and biosensors. COF shows superb characteristics, such as tuneable pore size and structure, permanent porosity, high surface area, thermal stability, and low density. Apart from these special properties, COF’s electrochemical behaviour can be modulated using electroactive building blocks. Furthermore, the great variety of functional groups that can be inserted in their structures makes them interesting materials to be conjugated with biological recognition elements, such as antibodies, enzymes, DNA probe, aptamer, etc. Moreover, the possibility of linking them with other special nanomaterials opens a wide range of possibilities to develop new electrochemical sensors and biosensors.

Recent Development of Morphology-Controlled Hybrid Nanomaterials for Triboelectric Nanogenerator: A Review

Being cognizant of modern electronic devices, the scientists are continuing to investigate renewable green-energy resources for a decade. Amid different energy harvesting systems, the triboelectric nanogenerators (TENGs) have been found to be the most promising mechanical harvesting technology and have drawn attention to generate electrical energy. Thanks to its instant output power, choice to opt for wide-ranging materials, low maintenance cost, easy fabrication process and environmentally friendly nature. Due to numerous working modes of TENGs, it is dedicated to desired application at ambient conditions. In this review, an advance correlation of TENGs have been explained based on the variety of nanostructures, including 0D, 1D, 2D, 3D, metal organic frameworks (MOFs), coordination polymers (CPs), covalent organic frameworks (COFs), and perovskite materials. Moreover, an overview of previous and current perspectives of various nanomaterials, synthesis, fabrication and their applications in potential fields have been discussed in detail.

Polyimide-Based Covalent Organic Framework as a Photocurrent Enhancer for Efficient Dye-Sensitized Solar Cells

Covalent organic frameworks (COFs) are of great interest in the energy and optoelectronic fields due to their high porosity, superior thermal stability, and highly ordered conjugated architecture, which are beneficial for charge migration, charge separation, and light harvesting. In this study, polyimide COFs (PI-COFs) are synthesized through the condensation reaction of pyromellitic dianhydride (PMDA) with tris(4-aminophenyl) amine (TAPA) and then doped in the TiO₂ photoelectrode of a dye-sensitized solar cell (DSSC) to co-work with N719 dye to explore their functionality. As a benchmark, the pristine DSSC without the doping of PI-COFs exhibits a power conversion efficiency of 9.05% under simulated one sun illumination. The doping of 0.04 wt % PI-COFs contributes an enhanced short-circuit current density (J_SC) from 17.43 to 19.03 mA/cm², and therefore, the cell efficiency is enhanced to 9.93%. The enhancement of J_SC is attributed to the bifunctionality of PI-COFs, which enhances the charge transfer/injection and suppresses the charge recombination through the host (PI-COF)-guest (N719 dye) interaction. In addition, the PI-COFs also function as a cosensitizer and contribute a small quantity of photoinduced electrons upon sunlight illumination. Surface modification of oxygen plasma improves the hydrophilicity of PI-COF particles and reinforces the heterogeneous linkage between PI-COF and TiO₂ nanoparticles, giving rise to more efficient charge injection. As a result, the champion cell exhibits a high power conversion efficiency of 10.46% with an enhanced J_SC of 19.43 mA/cm². This methodology of increasing solar efficiency by modification of the photoelectrode with the doping of PI-COFs in the TiO₂ nanoparticles is promising in the development of DSSCs.

Porous liquids - the future is looking emptier

The development of microporosity in the liquid state is leading to an inherent change in the way we approach applications of functional porosity, potentially allowing access to new processes by exploiting the fluidity of these new materials. By engineering permanent porosity into a liquid, over the transient intermolecular porosity in all liquids, it is possible to design and form a porous liquid. Since the concept was proposed in 2007, and the first examples realised in 2015, the field has seen rapid advances among the types and numbers of porous liquids developed, our understanding of the structure and properties, as well as improvements in gas uptake and molecular separations. However, despite these recent advances, the field is still young, and with only a few applications reported to date, the potential that porous liquids have to transform the field of microporous materials remains largely untapped. In this review, we will explore the theory and conception of porous liquids and cover major advances in the area, key experimental characterisation techniques and computational approaches that have been employed to understand these systems, and summarise the investigated applications of porous liquids that have been presented to date. We also outline an emerging discovery workflow with recommendations for the characterisation required at each stage to both confirm permanent porosity and fully understand the physical properties of the porous liquid.

COF-43 based voltammetric sensor for Ag(I) determination: optimization of experimental conditions by Box-Behnken design

Hydrazone-linked covalent organic framework-43 (COF-43) was synthesized and the carbon paste electrode (CPE) modified with this COF was used as a voltammetric sensor to measure silver(I). Various characterization tests (XRD, FTIR, BET, SEM/EDX, electrochemical impedance (EIS), and cyclic voltammetry (CV)) were performed on the synthesized COF-43 and the prepared COF-43/CPE. Box-Behnken design was used to optimize the preparation and operation conditions of the sensor. EIS and CV investigations reveal the diffusive characteristics of silver transport in the electrode matrix. An appropriate mechanism for the sensor procedure has been suggested and ratified by electrochemical and SEM/EDX techniques. The COF-43 used has several recognition elements for the selective binding of silver ion and due to its high porosity provides a large space for the deposition and reduction of large amounts of silver. Therefore, due to the correct selection of COF used in the construction of the sensor, high selectivity and sensitivity for the prepared sensor has been achieved. The obtained data disclosed that the modification of the carbon paste electrode by COF-43 significantly improves the analytical characteristics of the sensor, which specifies the performance of COF-43 as a sensory material for determining silver(I). The obtained calibration curve is linear in the concentration range from 0.001 μM to 10.0 μM and the detection limit is 1.5 × 10^-10 M. Various statistical tests have been employed to evaluate the sensor performance. The appropriate accuracy and precision of the proposed method were confirmed using the analysis of variance (ANOVA) approach. Potential interferences were investigated and it was found that the other species did not have a significant effect on the sensor performance. The prepared sensor has been successfully used to measure silver in two samples of photographic effluents, bleaching, and fixing agents. The results from the analysis of real samples demonstrate the reliable applicability of the fabricated sensor.

Ultrasensitive Detection of Ochratoxin A With a Zeolite Imidazolate Frameworks Composite–Based Electrochemical Aptasensor

Ochratoxin A (OTA) is a harmful mycotoxin, which is mainly secreted by Penicillium and Aspergillus species. In this work, an electrochemical aptasensor is presented for OTA detection based on Au nanoparticles (AuNPs) modified zeolite imidazolate frameworks (ZIFs) ZIF-8 platform and duplex-specific nuclease (DSN) triggered hybridization chain reaction (HCR) signal amplification. G-quadruplex-hemin assembled HCR nanowire acted as a nicotinamide adenine dinucleotide (NADH) oxidase and an HRP-mimicking DNAzyme. Besides, thionine (Thi) was enriched as a redox probe for signal amplification in this pseudobienzyme electrocatalytic system. Under the optimal conditions, the analytical response ranged from 1 to 10⁷ fg ml⁻¹ with a detection limit of 0.247 fg ml⁻¹. Furthermore, the aptasensor was proven to be applied in real wheat samples with a recovery between 96.8 and 104.2%, illustrating the potential prospects in practical detection.

2D and 3D Covalent Organic Frameworks: Cutting-Edge Applications in Biomedical Sciences

Covalent organic frameworks (COFs) are crystalline porous organic structures with two- or three-dimensional (2D or 3D) features and composed of building blocks being connected via covalent bonds. The manifold applications of COFs in optoelectronic devices, energy conversion and storage, adsorption, separation, sensing, organocatalysis, photocatalysis, electrocatalytic reactions, and biomedicine are increasing because of their notable intrinsic features such as large surface area, porosity, designable structure, low density, crystallinity, biocompatibility, and high chemical stability. These properties have rendered 2D and 3D COF-based materials as desirable entities for drug delivery, gene delivery, photothermal therapy, photodynamic therapy, combination therapy, biosensing, bioimaging, and anticancer activities. Herein, different reactions and methods for the synthesis of 2D and 3D COFs are reviewed with special emphasis on the construction and state-of-the-art progress pertaining to the biomedical applications of 2D and 3D COFs of varying shapes, sizes, and structures. Specifically, stimuli-responsive COFs-based systems and targeted drug delivery approaches are summarized.

Pyrazine-cored covalent organic frameworks for efficient CO2 adsorption and removal of organic dyes

The rational introduction of nitrogen heterocycles to a linker of covalent organic frameworks (COFs) can effectively capture CO2 and remove dyes in sewage. Here we report the designed synthesis of...

Covalent organic framework DQTP modified pencil graphite electrode for simultaneous determination of bisphenol A and bisphenol S

The sensitivity and selectivity of electrochemical analysis are challenging due to the materials used for electrode modification as well as electrical conductivity, catalytic activity and recognition ability of the working electrode. In this work, a portable 3D-printed electrochemical electrode clamp was designed and applied in combination with the developed covalent organic framework (COF DQTP)-modified pencil graphite electrode (DQTP/PGE). The β-ketoenamine-linked COF DQTP synthesized by 1,3,5-triformylphloroglucinol (TP) and 2,6-diaminoanthraquinone (DQ) through solvothermal method is a porous crystalline with excellent conductivity and large periodic π-arrays, coupled with commercial available pencil graphite electrode to fabricate a disposable sensor for simultaneous determination of environmental endocrine disruptors bisphenol A and bisphenol S. The DQTP/PGE sensor exhibited high electrical conductivity and catalytic activity, and a good linearity was obtained in a range of 0.5-30 μM for two bisphenols with a detection limit of 0.15 μM (S/N = 3). Moreover, the sensor showed a reproducible and stable response over one month with negligible interference, and an accepted recovery with real food packaging samples.

Controllable Synthesis and Performance Modulation of 2D Covalent-Organic Frameworks

Covalent-organic frameworks (COFs) are especially interesting and unique as their highly ordered topological structures entirely built from plentiful π-conjugated units through covalent bonds. Arranging tailorable organic building blocks into periodically reticular skeleton bestows predictable lattices and various properties upon COFs in respect of topology diagrams, pore size, properties of channel wall interfaces, etc. Indeed, these peculiar features in terms of crystallinity, conjugation degree, and topology diagrams fundamentally decide the applications of COFs including heterogeneous catalysis, energy conversion, proton conduction, light emission, and optoelectronic devices. Additionally, this research field has attracted widespread attention and is of importance with a major breakthrough in recent year. However, this research field is running with the lack of summaries about tailorable construction of 2D COFs for targeted functionalities. This review first covers some crucial polymeric strategies of preparing COFs, containing boron ester condensation, amine-aldehyde condensation, Knoevenagel condensation, trimerization reaction, Suzuki CC coupling reaction, and hybrid polycondensation. Subsequently, a summary is made of some representative building blocks, and then underlines how the electronic and molecular structures of building blocks can strongly influence the functional performance of COFs. Finally, conclusion and perspectives on 2D COFs for further study are proposed.

Molecular Engineering of Covalent Organic Framework Cathodes for Enhanced Zinc-Ion Batteries

Covalent organic frameworks (COFs) are potentially promising electrode materials for electrochemical charge storage applications thanks to their pre-designable reticular chemistry with atomic precision, allowing precise control of pore size, redox-active functional moieties, and stable covalent frameworks. However, studies on the mechanistic and practical aspects of their zinc-ion storage behavior are still limited. In this study, a strategy to enhance the electrochemical performance of COF cathodes in zinc-ion batteries (ZIBs) by introducing the quinone group into 1,4,5,8,9,12-hexaazatriphenylene-based COFs is reported. Electrochemical characterization demonstrates that the introduction of the quinone groups in the COF significantly pushes up the Zn²⁺ storage capability against H⁺ and elevates the average (dis-)charge potential in aqueous ZIBs. Computational and experimental analysis further reveals the favorable redox-active sites that host Zn²⁺ /H⁺ in COF electrodes and the root cause for the enhanced electrochemical performance. This work demonstrates that molecular engineering of the COF structure is an effective approach to achieve practical charge storage performance.

Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges

The study of the electrochemical catalyst conversion of renewable electricity and carbon oxides into chemical fuels attracts a great deal of attention by different researchers. The main role of this process is in mitigating the worldwide energy crisis through a closed technological carbon cycle, where chemical fuels, such as hydrogen, are stored and reconverted to electricity via electrochemical reaction processes in fuel cells. The scientific community focuses its efforts on the development of high-performance polymeric membranes together with nanomaterials with high catalytic activity and stability in order to reduce the platinum group metal applied as a cathode to build stacks of proton exchange membrane fuel cells (PEMFCs) to work at low and moderate temperatures. The design of new conductive membranes and nanoparticles (NPs) whose morphology directly affects their catalytic properties is of utmost importance. Nanoparticle morphologies, like cubes, octahedrons, icosahedrons, bipyramids, plates, and polyhedrons, among others, are widely studied for catalysis applications. The recent progress around the high catalytic activity has focused on the stabilizing agents and their potential impact on nanomaterial synthesis to induce changes in the morphology of NPs.

Covalent Organic Frameworks and Their Derivatives for Better Metal Anodes in Rechargeable Batteries

Metal anodes based on a plating/stripping electrochemistry such as metallic Li, Na, K, Zn, Ca, Mg, Fe, and Al are recognized as promising anode materials for constructing next-generation high-energy-density rechargeable metal batteries owing to their low electrochemical potential, high theoretical specific capacity, superior electronic conductivity, etc. However, inherent issues such as high chemical reactivity, severe growth of dendrites, huge volume changes, and unstable interface largely impede their practical application. Covalent organic frameworks (COFs) and their derivatives as emerging multifunctional materials have already well addressed the inherent issues of metal anodes in the past several years due to their abundant metallophilic functional groups, special inner channels, and controllable structures. COFs and their derivatives can solve the issues of metal anodes by interfacial modification, homogenizing ion flux, acting as nucleation seeds, reducing the corrosion of metal anodes, and so on. Nevertheless, related reviews are still absent. Here we present a detailed review of multifunctional COFs and their derivatives in metal anodes for rechargeable metal batteries. Meanwhile, some outlooks and opinions are put forward. We believe the review can catch the eyes of relevant researchers and supply some inspiration for future research.