Tailored Nanoarchitecturing of Microporous ZIF-8 to Hierarchically Porous Double-Shell Carbons and Their Intrinsic Electrochemical Property

Enhanced Capacitive Deionization of Hollow Mesoporous Carbon Spheres/MOFs Derived Nanocomposites by Interface-Coating and Space-Encapsulating Design

Exploring new carbon-based electrode materials is quite necessary for enhancing capacitive deionization (CDI). Here, hollow mesoporous carbon spheres (HMCSs)/metal-organic frameworks (MOFs) derived carbon materials (NC(M)/HMCSs and NC(M)@HMCSs) are successfully prepared by interface-coating and space-encapsulating design, respectively. The obtained NC(M)/HMCSs and NC(M)@HMCSs possess a hierarchical hollow nanoarchitecture with abundant nitrogen doping, high specific surface area, and abundant meso-/microporous pores. These merits are conducive to rapid ion diffusion and charge transfer during the adsorption process. Compared to NC(M)/HMCSs, NC(M)@HMCSs exhibit superior electrochemical performance due to their better utilization of the internal space of hollow carbon, forming an interconnected 3D framework. In addition, the introduction of Ni ions is more conducive to the synergistic effect between ZIF(M)-derived carbon and N-doped carbon shell compared with other ions (Mn, Co, Cu ions). The resultant Ni-1-800-based CDI device exhibits excellent salt adsorption capacity (SAC, 37.82 mg g-1) and good recyclability. This will provide a new direction for the MOF nanoparticle-driven assembly strategy and the application of hierarchical hollow carbon nanoarchitecture to CDI.

Sulfonated GO coated carbon electrodes with cation-selective functions for enhanced capacitive deionization of saltwater

Deionization of salt, contaminated underground and inorganic waste waters for water recycling and reuse is of increasing importance mainly due to the shortage of freshwater worldwide. Membrane capacitive deionization (MCDI) possessing a high electrosorption capacity and energy efficiency has been considered a promising method for desalination. However, the MCDI reaction system has limited applications because of the high interfacial resistance during operation. In the present work, the novel sulfonated graphene oxide (SGO) serving as a hydrophilic cation exchange membrane that was coated directly on the activated carbon (AC) electrode was prepared to enhance capacitive deionization of saltwater. Experimentally, the electrosorption capacity and charge efficiency of the AC/SGO (negative)||AC (positive) electrode pair using the coated SGO thin film increased from 12.8 to 19.8 mg/g and 56.7 to 89.3%, respectively. The enhancements were associated with the reduction of the co-ion effect during electrosorption. The strong negative PhSO3- group grafted on the SGO thin film could selectively accelerate the transport rate of cations during CDI. The increase of the charge efficiency also led to lower implemented current. This work demonstrates a simple, low-cost and effective desalination method that will likely have many new applications especially in water recycling and reuse.

Core-shell ZnO@CoO nitrogen doped nano-composites as highly sensitive electrochemical sensor for organophosphate pesticides detection

Core-shell ZIF-8@ZIF-67 was synthesized by growing a cobalt-based ZIF-67 on a ZIF-8 seed particle. Herein, through selective etching of the ZIF-8@ZIF-67 core and subsequent direct carbonization, core-shell hollow ZnO@CoO nitrogen-doped nanoporous carbon (HZnO@CoO-NPC) nanocomposites were prepared. HZnO@CoO-NPCs possessed a high nitrogen content, large surface area, high degree of graphitization and excellent electrical conductivity, all of which were attributed to successfully integrating the unique advantages of ZIF-8 and ZIF-67. HZnO@CoO-NPCs were used to assemble acetylcholinesterase (AChE) biosensors for organophosphorus pesticides (OPs) detection. The low detection limit of 2.74 × 10-13 M for chlorpyrifos and 7.6 × 10-15 M for parathion-methyl demonstrated the superior sensing performance. The results showed that the electrochemical biosensor constructed by HZnO@CoO-NPC provided a sensitive and efficient electrochemical strategy for OPs detection.

Synthesis of millimeter-scale ZIF-8 single crystals and their reversible crystal structure changes

Among various metal-organic frameworks (MOFs), the zeolitic imidazole framework (ZIF), constructed by the regular arrangement of 2-methylimidazole and metal ions, has garnered significant attention due to its distinctive crystals and pore structures. Variations in the sizes and shapes of ZIF crystals have been reported by changing the synthesis parameters, such as the molar ratios of organic ligands to metal ions, choice of solvents, and temperatures. Nonetheless, the giant ZIF-8 single crystals beyond the typical range have rarely been reported. Herein, we present the synthesis of millimeter-scale single crystal ZIF-8 using the solvothermal method in N,N-diethylformamide. The resulting 1-mm single crystal is carefully characterized through N2 adsorption-desorption isotherms, scanning electron microscopy, and other analytical techniques. Additionally, single-crystal X-ray diffraction is employed to comprehensively investigate the framework's mobility at various temperatures.

Enhancing Electrocatalytic Performance via Thickness-Tuned Hollow N-Doped Mesoporous Carbon with Embedded Co Nanoparticles for Oxygen Reduction Reaction

Improving catalytic performance relies heavily on the rational design of the spatial structure of electrocatalysts, achieved through exposure of active sites, acceleration of the charge/mass transfer rate, and confinement of the reactants. In this study, we have fabricated Co nanoparticles embedded in overhang eave-like hollow N-doped mesoporous carbon (Co@EMPC) by adjusting the thickness of mesoporous polydopamine (mPDA). Thanks to the abundance of short mesoporous channels within the porous structure and the tuned electronic properties resulting from heterojunction structures between metal and carbon, the prepared Co@EMPC provides increased accessibility to active sites and enhanced mass and charge transfer rates. These features contribute to superior performance in the oxygen reduction reaction (ORR), with a half-wave potential of 0.874 V vs RHE, as well as exceptional durability in alkaline media. This study introduces a useful approach to enhance the ORR using eave-like hollow nanoreactors.

Zn-BTC MOF as Self-Template to Hierarchical ZnS/NiS2 Heterostructure with Improved Electrochemical Performance for Hybrid Supercapacitor

Zn-BTC (H3BTC refers to 1, 3, 5-benzoic acid) MOF was used as a self-template and a zinc source to prepare ZnS/NiS2 with a layered heterogeneous structure as a promising electrode material using cation exchange and solid-phase vulcanization processes. The synergistic effect of the two metal sulfides enhances the application of ZnS/NiS2. And the high specific surface area and abundant active sites further promote the mass/charge transfer and redox reaction kinetics. In the three-electrode system, the specific capacitance was as high as 1547 F/g at a current density of 1 A/g, along with satisfactory rate capability (1214 F/g at 6 A/g) and cycling performance. Coupled with activated carbon (AC), the prepared hybrid device (ZnS/NiS2 as the positive electrode and AC as the negative electrode) (ZnS/NiS2/AC) can be operated under a potential window of 1.6 V and provides a high energy density of 26.3 Wh/kg at a power density of 794 W/kg. Notably, the assembled ZnS/NiS2//AC showed little capacity degradation after 5000 charge/discharge cycles.

In situ assembly of one-dimensional Pt@ZnO nanofibers driven by a ZIF-8 framework for achieving a high-performance acetone sensor

To obtain a high-performance gas sensor, it is essential to ingeniously design sensing materials containing the features of high catalytic performance, abundant oxygen vacancies, and splendid grain dispersibility through a simple method. Inspired by the fact that ZIF-8 contains semiconductor metal atoms, well-arranged ZnO nanoparticle (NP)-in situ assembled one-dimensional nanofibers (NFs) are obtained by one-step electrospinning. By incorporating Pt NPs into the cavity of ZIF-8 NPs, well-dispersed Pt@ZnO NPs driven by Pt@ZIF-8 composites are obtained after annealing. The well-arranged Pt@ZnO NP-assembled NFs not only exhibit abundant oxygen vacancies but also avoid the self-aggregation of ZnO and Pt NPs. Meanwhile, the small Pt NPs could improve the catalytic effect in return. Therefore, the gas sensor fabricated based on the above materials exhibits an acetone sensitivity of 6.1 at 370 °C, compared with pristine ZnO NFs (1.6, 5 ppm). Moreover, the well-arranged Pt@ZnO NP-assembled NFs show exceptional sensitivity to acetone with a 70.2 ppb-level detection limit in theory. The synergistic advantages of the designed sensing material open up new possibilities for non-invasive disease diagnosis.

MC-Au/MSS-Z8 porous network assisted advanced electrochemical immunosensing of 25-hydroxyvitamin D3

On-site monitoring of vitamin D levels is subject matter of immediate attention owing to the serious aftermath of its long standing deficiency. Therefore, a novel and efficient voltammetric immunosensing of 25-hydroxyvitamin D₃ (25(OH)VD₃) has been experimented based on an advanced sensing platform composed of meso-microporous silica-zeolitic imidazolate framework-8 (MSS-Z8) with highly enhanced surface area (S_{BET, MSS-Z8} (643.4 m²g^-1) > S_{BET, MSS} (49.95 m²g^-1)), embedded with gold particles (mass loading of 82 μg), particularly of microcubic morphology (MC-Au). Further, the MC-Au/MSS-Z8/FTO platform was fashioned with antibody specific to 25(OH)VD₃ via interaction between Au and abundant -SH groups present on the antibody surface. After optimization of operational parameters, the Ab/MC-Au/MSS-Z8/FTO immunosensor was employed for the determination of 25(OH)VD₃ within 0.01-10⁶ pg mL^-1 concentration range through differential pulse voltammetry technique in [Fe(CN)₆]^3-/4-. Thus, 0.01 pg mL^-1 concentration of 25(OH)VD₃ was the experimental limit of detection of the immunosensor. Further, upon examination of various analytical parameters, it turns out that the immunosensor exhibited low theoretical LOD (0.23 pg mL^-1) and LOQ (0.76 pg mL^-1), wide linear range (0.01-10⁶ pg mL^-1), ultra-sensitivity (143.9 μA [log (pg mL^-1)]^-1 cm^-2), adequate reproducibility (RSD ≤1.23%) and acceptable shelf life. Most importantly, the immunosensor presented proficient performance with spiked human serum samples (Recovery = 97.20-100.7%, RSD value < 5.6%), evincing the adequacy of present biosensing approach.

Amino-Functionalized Hierarchical Porous Carbon Derived from Zeolitic Imidazolate Frameworks for Ultrasensitive Electrochemical Sensing of Heavy Metals in Water

Electrochemical sensing provides a feasible avenue to monitor heavy metal ions (HMIs) in water, whereas the construction of highly sensitive and selective sensors remains challenging. Herein, we fabricated a novel amino-functionalized hierarchical porous carbon by the template-engaged method using ZIF-8 as the precursor and polystyrene sphere as the template, followed by carbonization and controllable chemical grafting of amino groups for efficient electrochemical detection of HMIs in water. The amino-functionalized hierarchical porous carbon features an ultrathin carbon framework with a high graphitization degree, excellent conductivity, unique macro-, meso-, and microporous architecture, and rich amino groups. As a result, the sensor exhibits prominent electrochemical performance with significantly low limits of detection for individual HMIs (i.e., 0.93 nM for Pb²⁺, 2.9 nM for Cu²⁺, and 1.2 nM for Hg²⁺) and simultaneous detection of HMIs (i.e., 0.62 nM for Pb²⁺, 1.8 nM for Cu²⁺, and 0.85 nM for Hg²⁺), which are superior to most reported sensors in the literature. Moreover, the sensor displays excellent anti-interference ability, repeatability, and stability for HMI detection in actual water samples.

Nanoreactor of Fe, N Co-Doped Hollow Carbon Spheres for Oxygen Reduction Catalysis

A simple template strategy was applied to prepare a Fe, N co-doped hollow carbon (Fe-NHC) nanoreactor for the oxygen reduction reaction (ORR) by coating Fe nanoparticles (Fe-NPs) with polydopamine (PDA), followed by high temperature pyrolysis and acid-leaching. With this method, Fe-NPs were used as both the template and the metal precursor, so that the nanoreactors can preserve the original spherical morphology and embed Fe single atoms on the inner walls. The carbonized PDA contained abundant N content, offering an ideal coordination environment for Fe atoms. By regulating the mass ratio of Fe-NPs and PDA, an optimal sample with a carbon layer thickness of 12 nm (Fe-NHC-3) was obtained. The hollow spherical structure of the nanoreactors and the atomically dispersed Fe were verified by various physical characterizations. As a result, Fe-NHC-3 performed well in ORR tests under alkaline conditions, with high catalytic activity, durability, and methanol resistance, demonstrating that the as-fabricated materials have the potential to be applied in the cathodic catalysis of fuel cells.

A self-powered photoelectrochemical oxytetracycline aptasensor: An integrated heterojunction photoanode of metal-organic framework derived ZnO nanopolyhedra/graphitic carbon nitride with high carrier density

The development of effective strategies for the detection of oxytetracycline (OTC) in soil is of great importance for preserving agri-environmental safety and human health. Herein, a novel photoactive material of metal-organic framework (MOF) derived ZnO nanopolyhedra/graphitic carbon nitride (ZnO/g-C3N4) heterojunction was designed by mixing calcination of zeolite imidazole framework-8 (ZIF-8) and melamine. A self-powered photoelectrochemical aptasensor for the sensitive and selective detection of OTC in soil was proposed using ZnO/g-C3N4 as the photoanode. The photoactivity of the MOF derived ZnO nanopolyhedra was regulated effectively by the introduction of g-C3N4, which resulted in a 7-fold increase in the photocurrent of the ZnO nanopolyhedra at a bias potential of 0 V. It was assigned to the higher carrier density of ZnO/g-C3N4. By virtue of the amplified photocurrent of ZnO/g-C3N4, the specificity of the OTC aptamer and the anti-interference ability of the self-powered sensing method, the designed aptasensor demonstrated the advantages of a wide linear range (0.005-200 nM), low limit of detection (1.49 × 10-3 nM), good selectivity and good reproducibility. For real soil sample analysis, satisfactory recoveries were obtained and further verified by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS).

Carbon Nanocage with Maximum Utilization of Atomically Dispersed Iron as Efficient Oxygen Electroreduction Nanoreactor

As key parameters of electrocatalysts, the density and utilization of active sites determine the electrocatalytic performance toward oxygen reduction reaction. Unfortunately, prevalent oxygen electrocatalysts fail to maximize the utilization of active sites due to inappropriate nanostructural design. Herein, a nano-emulsion induced polymerization self-assembly strategy is employed to prepare hierarchical meso-/microporous N/S co-doped carbon nanocage with atomically dispersed FeN₄ (denoted as Meso/Micro-FeNSC). In situ scanning electrochemical microscopy technology reveals the density of available active sites for Meso/Micro-FeNSC reach to 3.57 × 10¹⁴ sites cm^-2 , representing more than threefold improvement compared to micropore-dominant Micro-FeNSC counterpart (1.07 × 10¹⁴ sites cm^-2 ). Additionally, the turnover frequency of Meso/Micro-FeNSC is also improved to 0.69 from 0.50 e^- site^-1 s^-1 for Micro-FeNSC. These properties motivate Meso/Micro-FeNSC as efficient oxygen electroreduction electrocatalyst, in terms of outstanding half-wave potential (0.91 V), remarkable kinetic mass specific activity (68.65 A g^-1 ), and excellent robustness. The assembled Zn-air batteries with Meso/Micro-FeNSC deliver high peak power density (264.34 mW cm^-2 ), large specific capacity (814.09 mA h g^-1 ), and long cycle life (>200 h). This work sheds lights on quantifying active site density and the significance of maximum utilization of active sites for rational design of advanced catalysts.

Catalytic Oxidation of Glycerol over Pt Supported on MOF-Derived Carbon Nanosheets

A series of nitrogen-doped porous carbon nanosheets (NPCNs) doped with transition-metal-supported Pt catalysts were prepared by colloidal deposition and evaluated for the selective oxidation of glycerol to glyceric acid (GLYA) under nonalkaline conditions. The transition metal contained in the catalyst was found to affect its performance and selectivity for GLYA, with the Pt/Zr@NPCN catalyst showing the highest catalytic activity and selectivity. These materials were characterized using Brunauer-Emmett-Teller surface area analysis, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and CO₂ temperature-programmed desorption. The results showed that the small size of the Pt nanoparticles, the interaction between the Pt nanoparticles and the support, and the unique textural properties of the catalyst all promoted glycerol conversion and GLYA selectivity. A Zr concentration of 1.5 wt % and a support preparation temperature of 800 °C were found to provide a catalyst with the optimal performance that exhibited a glycerol conversion and selectivity for GLYA of 68.62 and 77.29%, respectively, at an initial O₂ pressure of 10 bar and 60 °C after 6 h. Even after being recycled five times, this material provided a GLYA selectivity of approximately 75%, although the glycerol conversion decreased from 68 to 50%. The insights may provide new suggestions on the design of efficient support for the selective oxidation of polyols.

Monomicellar assembly to synthesize structured and functional mesoporous carbonaceous nanomaterials

The large pores of functional mesoporous carbonaceous nanomaterials have broad accessibility, making them efficient substrates for the mass transport of chemicals in biomedical applications, gas separation, catalysis, sensing, and energy storage and conversion. Recently, the assembly of monomicelles has been used to control the nanostructure and mesoporosity of carbonaceous nanomaterials, where the structure-oriented unit is a single micelle made up of block copolymers/surfactants and of precursor species (via hydrogen bonds, Coulombic and/or other noncovalent interactions). Each monomicelle then represents a template for a single mesopore, and multiple monomicelles can be stacked like LEGO blocks. After polymerization of the precursor species (in this case dopamine), carbonization results in the carbonaceous nanomaterial. The micellar size, structure and shape can be easily tuned by altering the synthetic conditions, providing a high degree of control over the structure of the final product, which can therefore be shaped into original nanostructures otherwise difficult to synthesize using conventional templating methods. Here we provide a detailed procedure for the preparation of the monomicelles, the monomicellar assembly into mesostructured polymeric samples and the conversion of polymeric samples to carbonaceous frameworks. We describe the functional characterization of two mesoporous carbonaceous nanomaterials that demonstrate excellent sodium-ion storage performance and oxygen reduction reactivity, respectively. The monomicellar assembly process for the synthesis of the ordered mesoporous polymers requires ~5 h; the synthesis, including subsequent centrifugation, freeze drying and carbonization, requires 2 d, whereas the entire procedure, including the characterization of the nanomaterials, requires ~4 d.

MF-094 nanodelivery inhibits oral squamous cell carcinoma by targeting USP30

BACKGROUND

Oral squamous cell carcinoma (OSCC) is a common head and neck cancer, and the incidence of OSCC is increasing. As the mortality of OSCC keeps increasing, it is crucial to clarify its pathogenesis and develop new therapeutic strategies.

METHODS

Confocal laser scanning microscopy was used to evaluate the uptake of nanoparticles (NPs). The potential functions of USP30 were evaluated by cell counting kit (CCK)-8, flow cytometry, biochemical assay, coimmunoprecipitation, qRT-PCR, and immunoblotting. The antitumor effect of NP-loaded USP30 inhibitor MF-094 was evaluated in vitro and in vivo.

RESULTS

In this study, increased USP30 expression was found in OSCC specimens and cell lines through qRT-PCR and immunoblotting. CCK-8, flow cytometry, and biochemical assay revealed that the deubiquitylated catalytic activity of USP30 contributed to cell viability and glutamine consumption of OSCC. Subsequently, USP30 inhibitor MF-094 was loaded in ZIF-8-PDA and PEGTK to fabricate ZIF-8-PDA-PEGTK nanoparticles, which exhibited excellent inhibition of cell viability and glutamine consumption of OSCC, both in vitro and in vivo.

CONCLUSION

The results indicated the clinical significance of USP30 and showed that nanocomposites provide a targeted drug delivery system for treating OSCC.

Hierarchical MXene/Polypyrrole-Decorated Carbon Nanofibers for Asymmetrical Capacitive Deionization

Membrane capacitive deionization (MCDI) has emerged as a promising electric-field-driven technology for brackish water desalination and specific salt or charged ion separation. The use of carbon-based or pseudocapacitive materials alone for MCDI usually suffers from the drawbacks of low desalination capacity and poor cycling stability due to their limited accessible adsorption sites and obstructed charge-carrier diffusion pathways. Therefore, developing a hybrid electrode material with multiple charge storage mechanisms and continuous electron/ion transport pathways that can synergistically improve its specific capacitance and cycling durability has currently become one of the most critical technical demands. Herein, we developed a novel hierarchically architectured hybrid electrode by first spinning MXene into polyacrylonitrile (PAN)-based carbon nanofibers (MCNFs) to obtain a highly conductive carbon nanocomposite framework. The excellent spatial support structure can effectively prevent the dense packing of Cl^-- and DBS^--doped polypyrrole (PPy) molecular chains during the following electrodeposition process, which not only ensures the efficient transport of electrons in the continuous hybrid carbon nanofibrous skeleton but also provides abundant accessible sites for ion adsorption and insertion. The obtained self-supporting membrane electrodes (MCNF@PPy⁺Cl^- and MCNF@PPy⁺DBS^-) have the advantages of outstanding specific capacitance (318.4 and 153.9 F/g, respectively), low charge transfer resistance (10.0 and 5.3 Ω, respectively), and excellent cycling performance (78% and 90% capacitance retention ratios, respectively, after 250 electrochemical cycles). Furthermore, the asymmetrical membrane electrodes showed a superior desalination capacity of 91.2 mg g^-1 in 500 mg/L NaCl aqueous solution and obvious divalent ion (Ca²⁺, Mg²⁺) selective adsorption properties in high-salt water from the cooling towers of thermal power plants.

Metal-Organic Framework-Derived Carbon as a Photoacoustic Modulator of Alzheimer's β-Amyloid Aggregate Structure

Photoacoustic materials emit acoustic waves into the surrounding by absorbing photon energy. In an aqueous environment, light-induced acoustic waves form cavitation bubbles by altering the localized pressure to trigger the phase transition of liquid water into vapor. In this study, we report photoacoustic dissociation of beta-amyloid (Aβ) aggregates, a hallmark of Alzheimer's disease, by metal-organic framework-derived carbon (MOFC). MOFC exhibits a near-infrared (NIR) light-responsive photoacoustic characteristic that possesses defect-rich and entangled graphitic layers that generate intense cavitation bubbles by absorbing tissue-penetrable NIR light. According to our video analysis, the photoacoustic cavitation by MOFC occurs within milliseconds in the water, which was controllable by NIR light dose. The photoacoustic cavitation successfully transforms robust, β-sheet-dominant neurotoxic Aβ aggregates into nontoxic debris by changing the asymmetric distribution of water molecules around the Aβ's amino acid residues. This work unveils the therapeutic potential of NIR-triggered photoacoustic cavitation as a modulator of the Aβ aggregate structure.

Nitrogen and Sulfur Co-Doped Hierarchically Porous Carbon Nanotubes for Fast Potassium Ion Storage

Exploration of advanced carbon anode material is the key to circumventing the sluggish kinetics and poor rate capability for potassium ion storage. Herein, a synergistic synthetic strategy of engineering both surface and structure is adopted to design N, S co-doped carbon nanotubes (NS-CNTs). The as-designed NS-CNTs exhibit unique features of defective carbon surface, hollow tubular channel, and enlarged interlayer space. These features significantly contribute to a large potassium storage capacity of 307 mA h g^-1 at 1 A g^-1 and a remarkable rate performance with a capacity of 151 mA h g^-1 even at 5 A g^-1 . Furthermore, an excellent cyclability with 98% capacity retention after 500 cycles at 2 A g^-1 is also achieved. Systematic analysis by in situ Raman spectroscopy and ex situ TEM demonstrates the structural stability and reversibility in the charge-discharge process. Although the kinetics studies reveal the capacitive-dominated process for potassium storage, density functional theory calculations provide evidence that N, S co-doping contributes to expanding the interlayer space to promote the K-ion insertion, improving the electronic conductivity, and providing ample defective sites to favor the K-ion adsorption.

Mesoporous carbon decorated with MIL-100(Fe) as an electrochemical platform for ultrasensitive determination of trace cadmium and lead ions in surface water

In this work, MIL-100(Fe)-decorated mesoporous carbon powders (MC@MIL-100(Fe)) were prepared by in situ growth of MIL-100(Fe) on the surface of ZIF-8 framework-based mesoporous carbons (MC). The hybrid material was characterized using SEM equipped with EDS mapping for morphology investigation, X-ray photoelectron spectroscopy for chemical valence analysis, and X-ray diffraction for crystal structure determination. The developed sensor separated from the traditional bismuth film decoration, and simultaneously, MC@MIL-100(Fe) was applied for the first time to electrochemically detect trace amounts of Pb(II) and Cd(II). The fabricated MC@MIL-100(Fe)-based electrochemical sensor showed excellent response to the target analytes at -0.55 and - 0.75 V for lead and cadmium ions, respectively. By adjusting some measurement parameters, that is, the loading concentration of MC@MIL-100(Fe), acidity of the HAc-NaAc buffer (ABS), deposition potential, and deposition time, the analytical performance of the proposed electrochemical sensor was examined by exploring the calibration curve, repeatability, reproducibility, stability, and anti-interference under optimized conditions. The response current of the proposed MC@MIL-100(Fe) electrochemical sensor showed a well-defined linear relationship in the concentration ranges of 2-250 and 2-270 μg·L^-1 for Cd(II) and Pb(II), respectively. In addition, the detection limits of the sensor for Cd(II) and Pb(II) were 0.18 and 0.15 μg L^-1, respectively, which are well below the World Health Organization (WHO) drinking water guideline value. The MC@MIL-100(Fe) can be potentially used as an electrochemical platform for monitoring heavy metals in surface water, with satisfactory results.

MOF-derived nanoporous carbons with diverse tunable nanoarchitectures

Metal-organic frameworks (MOFs), or porous coordination polymers, are crystalline porous materials formed by coordination bonding between inorganic and organic species on the basis of the self-assembly of the reacting units. The typical characteristics of MOFs, including their large specific surface areas, ultrahigh porosities and excellent thermal and chemical stabilities, as well as their great potential for chemical and structural modifications, make them excellent candidates for versatile applications. Their poor electrical conductivity, however, has meant that they have not been useful for electrochemical applications. Fortuitously, the direct carbonization of MOFs results in a rearrangement of the carbon atoms of the organic units into a network of carbon atoms, which means that the products have useful levels of conductivity. The direct carbonization of zeolitic imidazolate framework (ZIF)-type MOFs, particularly ZIF-8, has successfully widened the scope of possible applications of MOFs to include electrochemical reactions that could be used in, for example, energy storage, energy conversion, electrochemical biosensors and capacitive deionization of saline water. Here, we present the first detailed protocols for synthesizing high-quality ZIF-8 and its modified forms of hollow ZIF-8, core-shell ZIF-8@ZIF-67 and ZIF-8@mesostuctured polydopamine. Typically, ZIF-8 synthesis takes 27 h to complete, and subsequent nanoarchitecturing procedures leading to hollow ZIF-8, ZIF-8@ZIF-67 and ZIF-8@mPDA take 6, 14 and 30 h, respectively. The direct-carbonization procedure takes 12 h. The resulting nanoporous carbons are suitable for electrochemical applications, in particular as materials for supercapacitors.

Design of reduced graphene oxide coating carbon sub-microspheres hierarchical nanostructure for ultra-stable potassium storage performance

The development of high-performance carbon-based anode materials is still a significant challenge for K-ion storage. In our work, we designed reduced graphene oxide coating carbon sub-microspheres hierarchical nanostructure (CS@RGO) hierarchical nanostructure via a simple freeze-drying and subsequent pyrolysis as anode for K-ion batteries (KIBs), which presented an excellent electrochemical performance for K-ion storage, with a reversible specific capacity of 295 mAh g^-1 after 100 cycles at 100 mAh g^-1. Even at a high current density of 1 A g^-1, our CS@RGO still achieves ultra-stable K-ion storage of 200 mAh g^-1 at 1 A g^-1 after 5000 cycles almost without capacity fade. According to the galvanostatic intermittent titration technique result, the CS@RGO hybrid receives a high average diffusion coefficient of 7.35 × 10^-8 cm² s^-1, contributing to the rapid penetration of K-ion, which facilitates the enhancement of electrochemical performance for KIBs. Besides, we also use Raman spectra to investigate the electrochemical behavior of our CS@RGO hybrid for K-ion storage and confirm the reaction process. We believe that our work will offer the opportunity to enable ultra-stable carbon-based materials by the structure design in the K-ion battery field.

Metal Embedded Porous Carbon for Efficient CO2 Cycloaddition under Mild Conditions

Nitrogen-doped porous carbon material was generated via thermal pyrolysis of zeolitic imidazole frameworks (ZIFs). The structure of the ZIF templates was tuned, so that the obtained product was an N-doped porous carbon-containing encapsulated metal nanoparticle. The hierarchical structural and unique properties of pyrolyzed materials are involved in further application, including catalysis. The as-synthesized porous carbon materials were applied as a catalyst for CO2 fixation on cyclic carbonates under near ambient pressure without solvent and co-catalyst. The zinc dispersion in highly porous carbon material, deriving from ZIF-8, exhibited a superior catalytic performance among the synthesized materials. The acid sites (Zn species) and the incorporated basic sites (N-species) present in the porous carbon material are essential for a high affinity for gas adsorption and CO2 conversion. Additionally, the catalyst was found to be very robust and stable during recycling studies as the catalytic performance remained high for seven cycles.

Facile preparation of nanocellulose/Zn-MOF-based catalytic filter for water purification by oxidation process

Sulfate radical (SO₄^•-)-based advanced oxidation processes (SR-AOPs) have recently attracted much attention due to their potential in degrading organic pollutants. Metal-organic frameworks (MOFs) have been reported as effective materials to generate SO₄^•-. However, it is challenging to separate and recover the dispersed MOF particles from the reaction solution when MOFs are used alone. We used cellulose nanofibers (CNFs) as a porous filter template to immobilize Zn-based MOF, zeolitic imidazolate framework-8 (ZIF-8), and obtained a catalytic composite membrane having peroxymonosulfate (PMS) activating function to produce SO₄^•-. The CNF was effective in holding ZIF-8 nanoparticle and making a durable porous filter. The activated PMS-produced ^•OH and SO₄^•- radicals from ZIF-8 play an important role in the catalytic reaction. More than 90% of methylene blue and rhodamine B was degraded by ZIF-8/CNFs composite membrane in the PMS environment within 60 min. The ZIF-8/CNFs catalytic filters can be used several times without performance reduction for organic dye degradation. The results show that ZIF-8/CNFs catalytic membrane can be separated from organic pollution system quickly and used for the efficient separation and recovery of MOF particle-based catalytic materials. Therefore, this study provides a new perspective for fabricating the MOFs particles-immobilized catalytic filter by biomass nanocellulose-based materials for water purification. This method can be used for facile fabrication of the cellulose-based porous functional filter and open diverse applications.

Theory-augmented informatics of ionic liquid electrolytes for co-design with nanoporous electrode materials

Ionic liquids possess compelling properties and vast chemical diversity, promising unprecedented performance and tunability for advanced electrochemical applications in catalysis, sensing, and energy storage. However, with broad tunability comes intractable, multidimensional parameter spaces not easily traversed by empirical approaches, limiting both scientific understanding and technological breakthroughs with these novel materials. In this Communication, we propose an extensible figure of merit that co-optimizes key ionic liquid properties, including electrochemical stability window, viscosity, and molecular ion size with respect to pore sizes of nanoporous electrodes typically utilized in electrochemical technologies. We coupled density functional theory (DFT) with informatics to augment physiochemical property databases to screen for high-performance room-temperature ionic liquid (RTIL) candidate compounds. This co-design framework revealed a number of promising RTILs that are underrepresented in the literature and thus warrant future follow-up investigations.

Two-dimensional mesoporous nitrogen-rich carbon nanosheets loaded with CeO2 nanoclusters as nanozymes for the electrochemical detection of superoxide anions in HepG2 cells

Two-dimensional (2D) porous carbon-based composite nanosheets loaded with metal oxide nanoclusters are expected to be promising electrocatalysts for high-performance electrochemical sensors. However, for this complicated composite material, strict reaction conditions and complex synthesis steps limit its general application in electrochemical detection. Here we present a facile method to fabricate 2D mesoporous nitrogen-rich carbon nanosheets loaded with CeO₂ nanoclusters (2D-mNC@CeO₂), for fabricating superoxide anions (O₂^•-) electrochemical sensor. The method is based on block copolymers self-assembly and the affinity of polydopamine to metal ions to obtain organic-inorganic hybrid, which can be directly converted into 2D-mNC@CeO₂ through carbonization strategy without structural deterioration. Characterizations demonstrate that the 2D-mNC@CeO₂ owned the 2D N-doped carbon structure with an interlinked hierarchical mesoporous and the uniformly dispersed CeO₂ nanoclusters on the surface. Benefitted from the unique structure, the 2D-mNC@CeO₂ shortens electron transfer distance, enhances mass transfer efficiency, exposes numerous active sites, and obtain a high Ce³⁺/Ce⁴⁺ ratio for improving electrocatalytic performance. The 2D-mNC@CeO₂/SPCEs sensors for O₂^•- detection has a detection limit of 0.179 μM (S/N = 3) and sensitivity of 401.4 μA cm^-2 mM^-1. The sensors can be applied to capture electrochemical signals of O₂^•- released from HepG2 cells, demonstrating the application potential of the sensors to monitor O₂^•- in biological fields.

Tuning Active Species in N-Doped Carbon with Fe/Fe3C Nanoparticles for Efficient Oxygen Reduction Reaction

Transition metal-nitrogen-carbon (M-N-C) catalysts (M = Fe, Co, etc.) are the most promising substituents of Pt-based catalysts for oxygen reduction reaction (ORR). However, the insufficient active species in catalysts inevitably hamper their widespread applications. Herein, we report the regulation of the active species in the catalysts of multicomponent N-doped carbon with Fe/Fe₃C nanoparticles by polydopamine (PDA) coating. It is found that the PDA is conducive to increasing the pyridinic, graphitic, and total N content in the carbon matrix. Benefiting from the chelating effects, the PDA further profits the formation of Fe-Nx structures and the implantation of Fe/Fe₃C nanoparticles in the matrix during the pyrolysis. As expected, the resultant catalysts exhibit over 15 times mass activity toward ORR than nitrogen-doped carbon. Moreover, our developed catalysts show long-term stability as well as high methanol tolerance, which is superior to that of the commercial Pt/C electrode. This work provides a new avenue to explore a wider range of high-performance ORR electrocatalysts by regulating the active species.

Realizing Toluene Deep Mineralization by Coupling Nonthermal Plasma and Nitrogen-Enriched Hollow Hybrid Carbon

Achieving excellent efficiency to mineralize volatile organic compounds (VOCs) under nonthermal plasma catalysis (NTP-catalysis) systems tremendously relies on the catalyst design. Herein, we report a dual-template strategy for synthesizing a core-shell structured nitrogen-enriched hollow hybrid carbon (N-HHC) by a facile pyrolysis of a Mn-ZIF-8@polydopamine core-shell precursor. N-HHC exhibits a remarkable plasma synergy effect and superior degradation efficiency for toluene (up to 90% with a specific input energy of 281 J/L), excellent CO₂ selectivity (>45%), and byproduct-inhibiting capability. Such outstanding functionality of the developed N-HHC is uniquely attributed to its hollow multistage and channeling structure, high concentration of O₃-decomposing species (pyrrolic and oxide pyridinic-N), and abundant ZnO active sites. Shedding light on an efficient synthetic strategy for designing an advanced nanocatalyst with enhanced VOC destruction in the NTP-catalysis system, the present results could be extended to design other N-doped metal/metal oxide-decorated hollow porous carbons for environment-related applications.

Inorganic salt-induced synthesis of lignin derived hierarchical porous carbon with self-embedded quantum dots and ultrahigh mesoporosity for supercapacitors

Lignin-based hierarchical porous carbon with self-embedded carbon quantum dots for supercapacitor electrodes.

Strategic design of Fe and N co-doped hierarchically porous carbon as superior ORR catalyst: from the perspective of nanoarchitectonics

In this study, we present microporous carbon (MPC), hollow microporous carbon (HMC) and hierarchically porous carbon (HPC) to demonstrate the importance of strategical designing of nanoarchitectures in achieving advanced catalyst (or electrode) materials, especially in the context of oxygen reduction reaction (ORR). Based on the electrochemical impedance spectroscopy and ORR studies, we identify a marked structural effect depending on the porosity. Specifically, mesopores are found to have the most profound influence by significantly improving electrochemical wettability and accessibility. We also identify that macropore contributes to the rate capability of the porous carbons. The results of the rotating ring disk electrode (RRDE) method also demonstrate the advantages of strategically designed double-shelled nanoarchitecture of HPC to increase the overall electron transfer number (n) closer to four by offering a higher chance of the double two-electron pathways. Next, selective doping of highly active Fe–N_x sites on HPC is obtained by increasing the nitrogen content in HPC. As a result, the optimized Fe and N co-doped HPC demonstrate high ORR catalytic activity comparable to the commercial 20 wt% Pt/C in alkaline electrolyte. Our findings, therefore, strongly advocate the importance of a strategic design of advanced catalyst (or electrode) materials, especially in light of both structural and doping effects, from the perspective of nanoarchitectonics.

This study elucidates the role of each class of nanopore by in-depth electrochemical analysis of three types of ZIF-8-derived carbons. Also, engineered co-doping of Fe and N is found essential to selectively form Fe–N_x sites in the carbon matrix.

Sandwich-type electrochemical aptasensor based on hollow mesoporous carbon spheres loaded with porous dendritic Pd@Pt nanoparticles as signal amplifier for ultrasensitive detection of cardiac troponin I

Signal amplification is crucial to improve the sensitivity for the electrochemical detection of cardiac troponin I (cTnI), one of the ideal biomarkers for early acute myocardial infarction (AMI) diagnosis. Herein, we developed a novel signal amplification strategy to construct a sandwich-type electrochemical aptasensor for the detection of cTnI. Core-shell Pd@Pt dendritic bimetallic nanoparticles loaded on melamine modified hollow mesoporous carbon spheres (Pd@Pt DNs/NH₂-HMCS) was prepared as labels to conjugate with thiol-modification DNA aptamers probe for signal amplification. While introducing numerous amino groups, the melamine functionalized hollow mesoporous carbon spheres (NH₂-HMCS) retained the edge-plane-like defective sites for the adhesion and electrocatalytic reduction of H₂O₂. With the unique characteristics of NH₂-HMCS, it not only enhanced the dispersity and loading capacity of core-shell Pd@Pt dendritic bimetallic nanoparticles (Pd@Pt DNs), but also improved the stability of bonding by the affinity interaction between Pd@Pt DNs and amino groups of melamine. Meanwhile, the synergistic catalysis effect between Pd@Pt DNs and NH₂-HMCS significantly enhanced the electrocatalytic reduction of H₂O₂ and further amplified the signal. Under optimal conditions, this recommended aptasensor for cTnI detection displayed a wide dynamic range from 0.1 pg/mL to 100.0 ng/mL and a low detection limit of 15.4 fg/mL (S/N = 3). The sensor also successfully realized the analysis of cTnI-spiked human serum samples, meaning potential applications in AMI diagnosis.

KOH-Activated Hollow ZIF-8 Derived Porous Carbon: Nanoarchitectured Control for Upgraded Capacitive Deionization and Supercapacitor

Herein, the synergistic effects of hollow nanoarchitecture and high specific surface area of hollow activated carbons (HACs) are reported with the superior supercapacitor (SC) and capacitive deionization (CDI) performance. The center of zeolite imidazolate framework-8 (ZIF-8) is selectively etched to create a hollow cavity as a macropore, and the resulting hollow ZIF-8 (HZIF-8) is carbonized to obtain hollow carbon (HC). The distribution of nanopores is, subsequently, optimized by KOH activation to create more nanopores and significantly increase specific surface area. Indeed, as-prepared hollow activated carbons (HACs) show significant improvement not only in the maximum specific capacitance and desalination capacity but also capacitance retention and mean desalination rates in SC and CDI, respectively. As a result, it is confirmed that well-designed nanoarchitecture and porosity are required to allow efficient diffusion and maximum electrosorption of electrolyte ions.

Facile synthesis of ultrathin two-dimensional graphene-like CeO2-TiO2 mesoporous nanosheet loaded with Ag nanoparticles for non-enzymatic electrochemical detection of superoxide anions in HepG2 cells

Here we presented a new facile strategy to fabricate ultrathin two-dimensional (2D) metal oxide nanosheets, by using polydopamine-coated graphene (rGO@PDA) as a template under simply wet-chemical conditions. Based on the strategy, graphene-like CeO₂-TiO₂ mesoporous nanosheet (MNS-CeO₂-TiO₂) was prepared and was loaded with dispersive Ag nanoparticles (AgNPs) to obtain effective electrocatalysts (denoted as Ag/MNS-CeO₂-TiO₂) for electrochemical detection of superoxide anion (O₂^•-). Characterizations demonstrated that MNS-CeO₂-TiO₂ exhibited ultrathin thickness, larger specific surface area, and pore volume in comparison with its bulk counterpart. The above properties of MNS-CeO₂-TiO₂ shorten electron transmission distance, promotes mass transfer, and is conducive to the dispersion of post-modified AgNPs. Therefore, the recommended Ag/MNS-CeO₂-TiO₂ sensors (denoted as Ag/MNS-CeO₂-TiO₂/SPCE) exhibited satisfactory properties, including the sensitivity of 737.1 μA cm^-2 mM^-1, the detection limit of 0.0879 μM (S/N = 3), and good selectivity. Meanwhile, the sensors also successfully realized in the online monitoring of O₂^•- released from HepG2 cells, meaning the prepared sensors had practical application potential towards the analysis of O₂^•- in biological samples.