Instant Gelation System as Self-Healable and Printable 3D Cell Culture Bioink Based on Dynamic Covalent Chemistry

Mesenchymal Stem Cell Exosome-Integrated Antibacterial Hydrogels for Nasal Mucosal Injury Treatment

Hydrogels have emerged as appealing prospects for wound healing due to their superior biocompatible qualities. However, the integration of antibacterial active substances into hydrogels for effective wound repair remains challenging. Here, we present a novel double-network hydrogel for nasal mucosal injury repair with antibacterial and self-healing capabilities. This hydrogel is the result of mixing aldehyde polyethylene glycol (PEG) and a carboxymethyl chitosan (CMCS)-based hydrogel with a photocured methylacrylate gelatin (GelMA) hydrogel to envelop mesenchymal stem cell exosomes (MSC-Exos). CMCS is rich in amino groups and facilitates antibacterial repair. Given the dynamically reversible Schiff base connections between the amino group of chitosan and the aldehyde group of modified PEG, the hydrogel can be easily injected into the lesion site because of its excellent injection and shear thinning properties. GelMA introduces an additional network layer for the hydrogel, which enhances its strength and extends the duration of stem cell exosomes on the wound surface. On the basis of these characteristics, we provide evidence that this compound hydrogel can substantially increase cell proliferation and regeneration, inhibit scar hyperplasia, and stimulate angiogenesis in rabbit nasal septum mucosa trauma models. These results suggest that MSC exosome-loaded hydrogels (ME-Gel) have substantial clinical potential for the repair and regeneration of nasal mucosa after surgery or trauma.

Hyaluronic Acid-Dopamine-NCSN Hydrogel Combined With Extracellular Matrix Promotes Wound Healing

The skin barrier is essential to prevent pathogenic invasion. When injury occurs, multiple biological pathways are promptly activated and wound repair processes are triggered. The effective healing of wounds is essential for survival, and dysfunction could result from aberrant wound repair. Preparation of many hydrogels, which involve the addition of growth/cell factors or mimic extracellular matrix (ECM) components, has not resulted in significant advances in tissue recovery. ECM contains a large number of biologically active molecules that activate a variety of cellular transduction pathways, which are essential for wound repair. Here, this work prepares hyaluronic acid-dopamine-thiourea (HA-DA-NCSN) hydrogels exhibiting ultrafast gelation in situ, following the methods of Xu et al., and subsequently designs a hydrogel containing ECM particles. In addition, the loaded ECM material, specifically decellularized ECM material, not only enhances the strength of the hydrogel network, but also delivers bioactive substances that make it a suitable platform for skin wound repair. The ECM hydrogel has great potential as an efficient bioactive wound dressing. This research suggests that this strategy is likely to improve skin wound closure in rat skin wound models.

3D/4D printing of cellulose nanocrystals-based biomaterials: Additives for sustainable applications

Cellulose nanocrystals (CNCs) have gained significant attraction from both industrial and academic sectors, thanks to their biodegradability, non-toxicity, and renewability with remarkable mechanical characteristics. Desirable mechanical characteristics of CNCs include high stiffness, high strength, excellent flexibility, and large surface-to-volume ratio. Additionally, the mechanical properties of CNCs can be tailored through chemical modifications for high-end applications including tissue engineering, actuating, and biomedical. Modern manufacturing methods including 3D/4D printing are highly advantageous for developing sophisticated and intricate geometries. This review highlights the major developments of additive manufactured CNCs, which promote sustainable solutions across a wide range of applications. Additionally, this contribution also presents current challenges and future research directions of CNC-based composites developed through 3D/4D printing techniques for myriad engineering sectors including tissue engineering, wound healing, wearable electronics, robotics, and anti-counterfeiting applications. Overall, this review will greatly help research scientists from chemistry, materials, biomedicine, and other disciplines to comprehend the underlying principles, mechanical properties, and applications of additively manufactured CNC-based structures.

A light-responsive wound dressing hydrogel: Gelatin based self-healing interpenetrated network with metal-ligand interaction by ferric citrate

Interpenetrated network (IPN) hydrogels with desired mechanical properties were prepared based on gelatin. A copolymer of dimethyl aminoethyl methacrylate (DMAEMA) with 2-Acrylamido-2-methylpropane sulfonic acid (AMPS) in gelatin was chemically cross-linked with methylene bis acrylamide (MBA) to form a semi-IPN hydrogel. Also, IPN hydrogel is fabricated from the AMPS-co-DMAEMA and gelatin in the presence of ferric ions with both chemical and physical cross-linkers. According to the compression test, the metal-ligand interaction has a remarkable impact on the mechanical strength of hydrogel. Ferric ions caused a decrease in the pores size confirmed by the SEM images of hydrogels, resulting in preserving its mechanical stability during the swelling test due to a more robust structure of hydrogel. Ferric to ferrous ions reduction is observed under visible light irradiation, which results in a light-sensitive hydrogel with a higher rate of biodegradation compared to semi-IPN hydrogels. MTT assay results implied that the synthesized hydrogels are non-toxic for the L-929 cell line. Also, for more detailed investigations, histological studies are conducted as in vivo tests. With regards to the improvements of mechanical properties harnessed in IPN hydrogels by ferric ions along with the extraordinary self-healing capability, IPNs would be considered an appropriate option for tissue engineering.

Functionalization of hyaluronic acid for development of self-healing hydrogels for biomedical applications: A review

Materials that are capable of undergoing self-repair following any physical damage or rupture due to external stimuli are identified as self-healing materials. Such materials are engineered by crosslinking the polymer backbone chains typically through reversible linkages. These reversible linkages include imines, metal-ligand coordination, polyelectrolyte interaction, disulfide, etc. These bonds are reversibly responsive to changes in various stimuli. Newer self-healing materials are now being developed in the field of biomedicine. Chitosan, cellulose, starch etc. are a few examples of polysaccharides that are generally used to synthesize such materials. Hyaluronic acid has been a very recent addition to the list of polysaccharides that are being investigated for construction of self-healing materials. It is non-toxic, non-immunogenic, has good gelation property and good injectability. Hyaluronic acid based self-healing materials are particularly employed for targeted drug delivery, protein and cell delivery, electronics, biosensors and many such biomedical applications. This review critically focuses on the functionalization of hyaluronic acid to fabricate self-healing hydrogels for biomedical applications. It also explores and sums up the mechanical data as well as self-healing efficiency of the hydrogels across wide range of interactions as discussed in the review below.

Hyaluronic acid-g-lipoic acid granular gel for promoting diabetic wound healing

Diabetic patients are prone to developing chronic inflammation after trauma and have persistent nonhealing wounds. Reactive oxygen species (ROS) and recurrent bacterial infections at the site of long-term wounds also further delay skin wound healing and tissue regeneration. In this study, a granular gel (which exhibits ROS scavenging and antibacterial properties) is fabricated based on hyaluronic acid-g-lipoic acid (HA-LA). Briefly, HA-LA is synthesized to fabricate HA-LA microgels, which are further assembled by Ag+ via its coordination effect with disulfide in dithiolane to form a granular gel. The extrudable bulk granular gel possesses a shear-thinning feature and is immediately restored to a solid state after extrusion, and this can be easily applied to the whole wound area. Therefore, the grafted LA not only allows for the construction of the granular gel but also removes excess ROS from the microenvironment. Additionally, the presence of Ag+ realizes the assembly of microgels and has antibacterial effects. In vivo experiments show that the HA-LA granular gel eliminates excessive ROS at the wound site and up-regulates the secretion of reparative growth factors, thus, accelerating common and diabetic wound healing significantly. Therefore, the ROS-scavenging granular gel that can be applied to the wound surface with chronic inflammation demonstrates strong clinical utility.

Structurally Dynamic Gelatin-Based Hydrogels with Self-Healing, Shape Memory, and Cytocompatible Properties for 4D Printing

Three-dimensional (3D) printable hydrogels with a shape memory effect have emerged as a new class of 4D printing materials recently and found wide applications in various fields. However, synergistically endowing such materials with good mechanical strength and biocompatibility for biomedical uses remains challenging. In this study, a series of multiresponsive hydrogels have been prepared through a dynamic covalent imine/Diels-Alder network from biocompatible starting materials of modified gelatin and poly(ethylene glycol)-based polymers. By further secondary crosslinking with a hyperbranched triethoxysilane reagent (HPASi) that contains multiple supramolecular hydrogen bonding, the hydrogels presented a strengthened self-healing and temperature-responsive shape memory effect. With the additional features of superior stretchability (elongation at break up to 523%), good cytocompatibility, and 3D printable properties, these multifunctional hydrogels showed great potential for broad biomedical applications.

MSCs-laden injectable self-healing hydrogel for systemic sclerosis treatment

As a novel cellular therapy, the anti-inflammatory and immunomodulatory virtues of mesenchymal stem cells (MSCs) make them promising candidates for systemic sclerosis (SSc) treatment. However, the clinical efficacy of this stratagem is limited because of the short persistence time, poor survival, and engraftment of MSCs after injection in vivo. Herein, we develop a novel MSCs-laden injectable self-healing hydrogel for SSc treatment. The hydrogel is prepared using N, O-carboxymethyl chitosan (CS-CM) and 4-armed benzaldehyde-terminated polyethylene glycol (PEG-BA) as the main components, imparting with self-healing capacity via the reversible Schiff-base connection between the amino and benzaldehyde groups. We demonstrate that the hydrogel laden with MSCs not only promoted the proliferation of MSCs and increased the cellular half-life in vivo, but also improve their immune-modulating functions. The tube formation assay indicates that the MSCs could significantly promote angiopoiesis. Moreover, the MSCs-laden hydrogel could inhibit fibrosis by modulating the synthesis of collagen and ameliorate disease progression in SSc disease model mice after subcutaneous injection of bleomycin. All these results highlight this novel MSCs-laden hydrogel and its distinctive functions in treatment of chronic SSc, indicating the additional potential to be used widely in the clinic.

•

We proposed novel MSCs-laden injectable self-healing hydrogel for SSc treatment.

•

The hydrogel was constructed by PEG-BA and CS-CM.

•

MSCs-laden hydrogel promotes angiopoiesis and inhibit fibrosis.

In situ-crosslinked hydrogel-induced experimental glaucoma model with persistent ocular hypertension and neurodegeneration

A reliable animal model providing chronic and persistent ocular hypertension and characteristic neurodegeneration is essential to recapitulate human glaucoma and understand the underlying pathophysiological mechanisms behind this disease. Many approaches have been tried to establish persistently elevated intraocular pressure (IOP), while no efficient model and no systematic evaluation has been widely accepted yet. Herein, we developed a novel approach to reliably induce persistent IOP elevation using an injectable hydrogel formulated by hyperbranched macromolecular poly(ethylene glycol) (HB-PEG) and thiolated hyaluronic acid (HA-SH) under physiological conditions and established a systematic system for model evaluation. By formulation screening, an appropriate hydrogel with proper mechanical property, non-swelling profile and cytocompatibility was selected for further experiment. By intracameral injection, a persistent IOP elevation over 50% above baseline was obtained and it led to progressive retinal ganglion cell loss and ganglion cell complex thickness reduction. The evaluation of the efficacy of the model was thoroughly analyzed by whole-mounts retina immunostaining, optical coherence tomography, and hematoxylin-eosin staining for histological changes and by electroretinography for visual function changes. The N35-P50 amplitude of the pattern electroretinography and the N2-P2 amplitude of the flash visual-evoked potential were decreased, while the scotopic electroretinography showed no statistically significant changes. The in situ-forming HB-PEG/HA-SH hydrogel system could be an appropriate strategy for developing a reliable experimental glaucoma model without any confounding factors. We expect this model would be conducive to the development of neuroprotective and neuro-regenerative therapies.

Development and Characterization of Complementary Polymer Network Bioinks for 3D Bioprinting of Soft Tissue Constructs

The development of three-dimensional (3D) bioprinting has been hindered by a narrow "biofabrication window" with a limited variety of feasible bioinks which are compatible with both high printability and well cytocompatibility. Herein, a generalizable strategy using complementary polymer network (CPN) bioinks has been developed in the current study, to address the conflict between the printability and cytocompatibility of bioinks in extrusion 3D bioprinting, especially for the manufacture of soft tissue constructs. In our strategy, CPN bioinks are formed though mixing two interpenetrated polymer networks, one of which is a photocrosslinkable polymer network, and the other is a dynamic polymer network crosslinked by reversible covalent linkage, thereby endowed with well reversible thixotropy. Compatible with well printability, shape fidelity, and cytocompatibility, the utilization of CPN bioinks provides a viable solution for extrusion 3D bioprinting of photocrosslinkable biomaterials at a low concentration, thus suitable for soft tissue construct fabrication. Briefly, this study is testified to be a successful attempt to extend the bioink diversity within the "biofabrication window", and offers a novel insight into designing more feasible bioinks based on their special rheological properties, for further tissue engineering and biomedicine application. This article is protected by copyright. All rights reserved.

3D-bioprinted cancer-on-a-chip: level-up organotypic in vitro models

Combinatorial conjugation of organ-on-a-chip platforms with additive manufacturing technologies is rapidly emerging as a disruptive approach for upgrading cancer-on-a-chip systems towards anatomic-sized dynamic in vitro models. This valuable technological synergy has potential for giving rise to truly physiomimetic 3D models that better emulate tumor microenvironment elements, bioarchitecture, and response to multidimensional flow dynamics. Herein, we showcase the most recent advances in bioengineering 3D-bioprinted cancer-on-a-chip platforms and provide a comprehensive discussion on design guidelines and possibilities for high-throughput analysis. Such hybrid platforms represent a new generation of highly sophisticated 3D tumor models with improved biomimicry and predictability of therapeutics performance.

Polysaccharide-based electroconductive hydrogels: Structure, properties and biomedical applications

Architecting an appropriate platform for biomedical applications requires setting a balance between simplicity and complexity. Polysaccharides (PSAs) play essential roles in our life in food resources, structural materials, and energy storage capacitors. Moreover, the diversity and abundance of PSAs have made them an indispensable part of food ingredients and cosmetics. PSA-based hydrogels have been extensively reviewed in biomedical applications. These hydrogels can be designed in different forms to show optimum performance. For instance, electroactive PSA-based hydrogels respond under an electric stimulus. Such performance can be served in stimulus drug release and determining cell fate. This review classifies and discusses the structure, properties, and applications of the most important polysaccharide-based electroactive hydrogels (agarose, alginate, chitosan, cellulose, and dextran) in medicine, focusing on their usage in tissue engineering, flexible electronics, and drug delivery applications.

Multiple Crosslinking Hyaluronic Acid Hydrogels with Improved Strength and 3D Printability

Hyaluronic acid (HA) hydrogel is preferred for biomedicine applications, as it possesses biodegradability, biocompatibility, and cell-regulated capacity as well as high hydration nature similar to the native extracellular matrix. However, HA hydrogel fabricated via a 3D printing technique often faces poor printing properties. In this study, maleiated sodium hyaluronate (MHA) with a high substituted degree of the acrylate group (i.e., 2.27) and thiolated sodium hyaluronate (SHHA) were synthesized. By blending these modified HAs, the MHA/SHHA hydrogels were prepared via pre-crosslinking through thiol-acrylate Michael addition and subsequently covalent crosslinking using thiol-acrylate and acrylate-acrylate photopolymerization mechanisms. Rheological properties, swelling behaviors, and mechanical properties can be modulated by altering the molar ratio of the thiol group and acrylate group. The results showed that the MHA/SHHA hydrogel precursors have rapidly gelling capacity and improved compressive strength. Based on these results, high-resolution hydrogel scaffolds with good structural stability were prepared by extrusion-based 3D printing. This HA hydrogel is cytocompatible and capable of supporting adherence of L929 cells, indicating its great potential for tissue engineering scaffolds.

A Hybrid Injectable and Self-Healable Hydrogel System as 3D Cell Culture Scaffold

Cell therapies have great potential for the treatment of many different diseases, while the direct application of cells to the targeted location leads to limited therapeutic outcomes due to the low cell engraftment and cell survival rate. Injectable hydrogels have been developed to facilitate cell delivery; however, those currently developed hydrogel systems still face the limited cell survival rate. Here, an injectable and self-healable hydrogel is reported through the combination of hyperbranched PEG-based multi-hydrazide macro-crosslinker (HB-PEG-HDZ) and aldehyde-functionalized hyaluronic acid (HA-CHO), with gelatin added to increase the crosslinking density and cell activity. The hydrogels can be formed only in 7 s due to the relatively high content of the functional end groups. The reversible crosslinking mechanism between the hydrazide and aldehyde groups endows the hydrogel with shear-thinning and self-healing properties. The hydrogels with gelatin exhibit relatively better mechanical properties and cell activity. The hydrogels can improve the survival, attachment, and engraftment of injected cells due to the rapid sol-gel transition, which can promote an enhanced regenerative response.

A double-crosslinked self-healing antibacterial hydrogel with enhanced mechanical performance for wound treatment

Self-healing hydrogel systems usually suffer from poor mechanical performance stemmed from weaker and reversible non-covalent interactions or dynamic chemical bonds, which hamper their practical applications. This issue is addressed by adopting a double-crosslinking design involving both dynamic Schiff base bonds and non-dynamic photo-induced crosslinking. This leads to the formation of a special topological structure which simultaneously provide good self-healing capability and enhanced mechanical performance (elastic recovery and tensile modulus of 157.4 kPa, close to modulus of native skin). The quaternary ammonium and protonated amino groups can provide superior antibacterial capability; and Schiff base formation between residual aldehyde groups and amino groups on tissue surface contribute to hydrogel's adhesion to tissues (5.9 kPa). Furthermore, the multifunctional hydrogels with desirable mechanical performance, self-healing capability, superior antibacterial capability and tissue adhesion can significantly promote healing of infectious cutaneous wound, tissue remodeling and regeneration.