Flexible Double-Sided Light-Emitting Devices Based on Transparent Embedded Interdigital Electrodes

Multi-grayscale driving system for passive-matrix alternating current electroluminescence display

Alternating current electroluminescence (ACEL) has great potential in flexible displays, especially in textile displays. However, since ACEL needs high-frequency, high-voltage AC signal to drive, there remains no driving scheme for pixelated ACEL display to achieve multiple gray scales. In this work, a driving scheme based on full-bridge inverters is proposed for passive-matrix ACEL (PMACEL) display, which achieves multiple gray scales by changing the duty cycle of the square wave. A single-pixel ACEL displaying 16 gray levels (4 bits) and a 5 × 8 fabric PMACEL displaying eight gray levels are demonstrated, enabling flexible ACEL devices to exhibit more vivid tones on a fabric substrate.

Alternating Current Electroluminescence for Human-Interactive Sensing Displays

The development of stimuli-interactive displays based on alternating current (AC)-driven electroluminescence (EL) is of great interest, owing to their simple device architectures suitable for wearable applications requiring resilient mechanical flexibility and stretchability. AC-EL displays can serve as emerging platforms for various human-interactive sensing displays (HISDs) where human information is electrically detected and directly visualized using EL, promoting the development of the interaction of human-machine technologies. This review provides a holistic overview of the latest developments in AC-EL displays with an emphasis on their applications for HISDs. AC-EL displays based on exciton recombination or impact excitations of hot electrons are classified into four representative groups depending upon their device architecture: 1) displays without insulating layers, 2) displays with single insulating layers, 3) displays with double insulating layers, and 4) displays with EL materials embedded in an insulating matrix. State-of-the-art AC HISDs are discussed. Furthermore, emerging stimuli-interactive AC-EL displays are described, followed by a discussion of scientific and engineering challenges and perspectives for future stimuli-interactive AC-EL displays serving as photo-electronic human-machine interfaces.

Solution-processable electrode-material embedding in dynamically inscribed nanopatterns (SPEEDIN) for continuous fabrication of durable flexible devices

A facile and scalable lithography-free fabrication technique, named solution-processable electrode-material embedding in dynamically inscribed nanopatterns (SPEEDIN), is developed to produce highly durable electronics. SPEEDIN uniquely utilizes a single continuous flow-line manufacturing process comprised of dynamic nanoinscribing and metal nanoparticle solution coating with selective embedding. Nano- and/or micro-trenches are inscribed into arbitrary polymers, and then an Ag nanoparticle solution is dispersed, soft-baked, doctor-bladed, and hard-baked to embed Ag micro- and nanowire structures into the trenches. Compared to lithographically embossed metal structures, the embedded SPEEDIN architectures can achieve higher durability with comparable optical and electrical properties and are robust and power-efficient even under extreme stresses such as scratching and bending. As one tangible application of SPEEDIN, we demonstrate a flexible metal electrode that can operate at 5 V at temperatures up to 300 °C even under the influence of harsh external stimuli. SPEEDIN can be applied to the scalable fabrication of diverse flexible devices that are reliable for heavy-duty operation in harsh environments involving high temperatures, mechanical deformations, and chemical hazards.

High-Performance Transparent and Conductive Films with Fully Enclosed Metal Mesh

Metal mesh films as a kind of transparent conductive electrodes (TCEs) have shown high promise in various optoelectronic devices but are still challenged by a combination of high conductivity and transparency, mechanical robustness, and uniform electric field. Herein, we demonstrate a new concept of transparent and conductive films with a fully enclosed metal mesh, which is embedded in deep microcavities and is coated with a conductive polymer layer to combine these metrics. To ensure high conductivity and transparency, metal ink is filled into the fine (down to submicrometers) and deep mesh microcavities by electrowetting-assisted blading with low square resistances of 0.4 and 2.69 Ω sq^-1 at typical transmittances of 76.9 and 87.4%, respectively. The covered thin conductive polymer layer improves the electric field uniformity of metal mesh films by at least three orders of magnitude. The fully enclosed metal mesh films exhibit excellent mechanical flexibility, indicated by the fact that the resistance is almost unchanged after 10,000 bending cycles at a bending radius of ∼5 mm. Based on the fully enclosed metal mesh films, the emission intensity of alternating current electroluminescent devices is improved by more than three times compared with that in the case of solely using common metal mesh films.

Piezo-Actuated One-Axis Vibrational Patterning for Mold-Free Continuous Fabrication of High-Precision Period-Programmable Micro- and Nanopatterns

We present a mold-free high-resolution nanopatterning technology named piezo-actuated one-axis vibrational patterning (POP) that enables continuous and scalable fabrication of micro- and nanopatterns with precisely programmable periods and dimensions. POP utilizes the piezoelectric stack-actuated high-precision uniaxial vibration of a flat, pattern-free rigid tool edge to conduct sub-50 nm-periodic indentations on various compliant substrates laterally fed underneath. By controlling the tool vibration frequency, tool temperature, and substrate feed rate and by combining sequential tool strokes along multiple directions, diverse functional micro- and nanopatterns with variable periods and depths and multidimensional profiles can be continuously created without resorting to mold prefabrication. With its simple but universal principle, excellent scalability, and versatile processability, POP can be practically applied to many functional devices particularly requiring large-area micro- and nanopatterns with specifically designed periods and dimensions.