High diopter spectacle using a flexible Fresnel lens with a combination of grooves

In this study, the Fresnel lens was investigated as a potential candidate for vision correction in patients with myopia. A few previous studies have suggested this idea; however, Fresnel lenses are limited by their aesthetics and quality. Therefore, we designed a combination of Fresnel lens grooves with a constant height and pitch of 13 µm and 0.1 mm, respectively, to overcome the limitations caused by ultra-precision machining with a tool nose radius of 30 µm. A thin replicated Fresnel lens with a power of -5 diopter was procured and applied directly as spectacles that are unattached to the normal lens. The optical performance and image quality of the Fresnel lens were compared with those of a conventional lens possessing the same power in both near and far vision. These results extend the applicability for the use of Fresnel lenses as vision-correcting ophthalmological lenses and imaging systems.

Plasmonic Color Printing via Bottom-Up Laser-Induced Photomodification Process

Plasmonic color printing has received significant attention owing to its advantages such as nonfading and nontoxic color expression, without necessitating the use of chemical dyes. Recently, color generation from laser-induced plasmonic nanostructures has been extensively explored because of its simplicity, cost-effectiveness, and large-scale processability. However, these methods usually utilize a top-down method that causes unexpected background colors. Here, we proposed a novel method of plasmonic color printing via a bottom-up type laser-induced photomodification process. In the proposed method, selective silver nanoparticles (Ag NPs) structure could be fabricated on a transparent substrate through a unique organometallic solution-based laser patterning process. A set of color palettes was formed on the basis of different processing parameters such as laser fluence, scanning speed, and baking time. This color change was verified by finite-difference time-domain (FDTD) simulations via monitoring the spectral peak shift of the localized surface plasmon resonance (LSPR) at Ag NPs. It was also confirmed that the colors can be fabricated at a relatively high scanning speed (≥10 mm/s) on a large substrate (>300 mm²). Since semitransparent color images can be patterned on various transparent substrates, this process will broaden the application range of laser-induced plasmonic color generation.

Solution-processable electrode-material embedding in dynamically inscribed nanopatterns (SPEEDIN) for continuous fabrication of durable flexible devices

A facile and scalable lithography-free fabrication technique, named solution-processable electrode-material embedding in dynamically inscribed nanopatterns (SPEEDIN), is developed to produce highly durable electronics. SPEEDIN uniquely utilizes a single continuous flow-line manufacturing process comprised of dynamic nanoinscribing and metal nanoparticle solution coating with selective embedding. Nano- and/or micro-trenches are inscribed into arbitrary polymers, and then an Ag nanoparticle solution is dispersed, soft-baked, doctor-bladed, and hard-baked to embed Ag micro- and nanowire structures into the trenches. Compared to lithographically embossed metal structures, the embedded SPEEDIN architectures can achieve higher durability with comparable optical and electrical properties and are robust and power-efficient even under extreme stresses such as scratching and bending. As one tangible application of SPEEDIN, we demonstrate a flexible metal electrode that can operate at 5 V at temperatures up to 300 °C even under the influence of harsh external stimuli. SPEEDIN can be applied to the scalable fabrication of diverse flexible devices that are reliable for heavy-duty operation in harsh environments involving high temperatures, mechanical deformations, and chemical hazards.

Imaging performance of an ultra-precision machining-based Fresnel lens in ophthalmic devices

This study aims to resolve the trade-off between the constraints and capabilities of ultra-precision machining to achieve ophthalmic Fresnel lenses. A general Fresnel lens pattern has a narrow variable pitch and curved grooves. However, we obviate the limitations of the tool nose radius constraint and the long tool path via ultra-precision machining of the modified Fresnel lens, ensuring a constant pitch of 0.1 mm and varying the height of straight grooves from 0 to 11 µm. Photorealistic raytracing visualization and MTF simulation verified the compatibility of the lens pattern with human perception sensitivity. Copper-coated mold was fabricated using a diamond tool with a tool nose radius of 5 µm. The replicated flexible Fresnel lens demonstrated a relative MTF imaging performance of 89.1% and was attached to the goggles for the qualitative assessment. The proposed Fresnel lens design and fabrication approach can be extended to applications in the visual and infrared ranges as well.

Flashlight-Induced Strong Self-Adhesive Surface on a Nanowire-Impregnated Transparent Conductive Film

The flashlight annealing process has been widely used in the field of flexible and printed electronics because it can instantly induce chemical and structural modifications over a large area on an electronic functional layer in a subsecond time range. In this study, for the first time, we explored a straightforward method to develop strong self-adhesion on a metal nanowire-based flexible and transparent conductive film via flashlight irradiation. Nanowire interlocking, for strong mechanical bonding at the interface between the nanowires and polyamide film, was achieved by simple hot pressing. Then, by irradiating the nanowire-impregnated film with a flashlight, several events such as interdiffusion and melting of surface polymers could be induced along with morphological changes leading to an increase in the film surface area. As a result, the surface of the fabricated film exhibited strong interfacial interactions while forming intimate contact with the heterogeneous surfaces of other objects, thereby becoming strongly self-adhesive. This readily achievable, self-attachable, flexible, and transparent electrode allowed the self-interconnection of a light-emitting diode chip, and it was also compatible for various applications, such as defogging windows and transparent organic light-emitting diodes.

Control of thermal deformation with photonic sintering of ultrathin nanowire transparent electrodes

Development of electronic devices on ultrathin flexible plastic substrates is of great value in terms of portability, cost reduction, and mechanical flexibility. However, because thin plastic substrates with low heat capacity can be more easily damaged by thermal energy, their use is limited. Highly flexible nanowire (NW) transparent conductive electrodes on ultrathin (∼10 μm) low cost polyethylene terephthalate (PET) substrates are fabricated. The control of intense pulsed light (IPL) irradiation process parameters to induce NW welding for maximum conductivity and minimal thermal damage of the PET substrate is explored. For this purpose, trends in temperature variation of NW thin films irradiated by IPL under various operating conditions are numerically analyzed using commercial software. Simulations indicate that irradiating light operated at a higher voltage and for a shorter time, and use of multiple pulses of low frequency can reduce thermal deformation of the PET substrate. Furthermore, we experimentally confirm that NW transparent electrodes can be successfully fabricated with less thermal deformation of the ultrathin plastic substrate when light is irradiated under well-controlled conditions derived from the simulation. The highly flexible NW transparent conducting electrode exhibits excellent mechanical flexibility to withstand severe deformation and can be successfully implemented in flexible organic light-emitting diodes (OLEDs).

Facile Fabrication of Highly Conductive, Ultrasmooth, and Flexible Silver Nanowire Electrode for Organic Optoelectronic Devices

So far, one of the fundamental limitations of silver nanowires (Ag NWs) is the high contact resistance among their junctions. Moreover, a rough surface due to its random arrangement is inevitable to electrical short when the nanowire-based electronics is driving. To improve the contact resistance, we suggest that the particle shape nanocrystals are intentionally reduced at the junctions by a localized joule-heat reduction approach from the silver ions. Via localized reductions, the reduced nanoparticles effectively weld the junction's areas, resulting in a 19% decrease in sheet resistance to 9.9 Ω sq^-1. Besides, the nanowires are embedded into a polyamide film with gentle hot pressing. Consequently, the roughness was considerably dropped so that it was successful to demonstrate organic light-emitting diodes (OLEDs) with nanowires, which was beneficial to be laminated with OLEDs under the low temperature. The experimental results show that the Ag NW-embedded films reach 10.9 Ω sq^-1 of the sheet resistance at 92% transmittance and the roughness was only 1.92 nm.

Facile and Scalable Fabrication of Flexible Reattachable Ionomer Nanopatterns by Continuous Multidimensional Nanoinscribing and Low-temperature Roll Imprinting

We develop a facile route to the scalable fabrication of flexible reattachable ionomer nanopatterns (RAINs) by continuous nanoinscribing and low-temperature roll imprinting, which are repeatedly attachable to and detachable from arbitrarily shaped surfaces. First, by sequentially performing continuous nanoinscribing over a polymer substrate along the multiple directions, we readily create the multidimensional nanopattern, which otherwise demands complex nanofabrication. After its transfer to an elastomer pad for use as a soft nanoimprinting stamp, we then conduct a low-temperature roll imprinting of the ionomer film to fabricate a flexible and highly transparent RAIN. Reversible loosening of ionic units in the ionomer material at the mild temperature as low as ∼60-70 °C enables the faithful nanopatterning over thermosensitive organic compounds and fragile materials under a slight pressure. The excellent adhesion purely emerging from ionic interactions uniquely realizes the conformal attachability and clean detachability of RAINs for universal targets in ambient conditions, particularly beneficial for individual wearable and mobile devices requiring the user-specific "on/off" of the nanopattern-driven functionalities. As one vivid example, we demonstrate that a single light-emitting device can be switched from the focused pointer to the widespread flashlight depending on the RAIN application upon user's purpose.

A photonic sintering derived Ag flake/nanoparticle-based highly sensitive stretchable strain sensor for human motion monitoring

Recently, the demand for stretchable strain sensors used for detecting human motion is rapidly increasing. This paper proposes high-performance strain sensors based on Ag flake/Ag nanocrystal (NC) hybrid materials incorporated into a polydimethylsiloxane (PDMS) elastomer. The addition of Ag NCs into an Ag flake network enhances the electrical conductivity and sensitivity of the strain sensors. The intense localized heating of Ag flakes/NCs is induced by intense pulsed light (IPL) irradiation, to achieve efficient sintering of the Ag NCs within a second, without damaging the PDMS matrix. This leads to significant improvement in the sensor sensitivity. Our strain sensors are highly stretchable (maximum strain = 80%) and sensitive (gauge factor = 7.1) with high mechanical stability over 10 000 stretching cycles under 50% strain. For practical demonstration, the fabrication of a smart glove for detecting the motions of fingers and a sports band for measuring the applied arm strength is also presented. This study provides an effective method for fabricating elastomer-based high-performance stretchable electronics.

Defect-Free, Highly Uniform Washable Transparent Electrodes Induced by Selective Light Irradiation

A simple route to fabricate defect-free Ag-nanoparticle-carbon-nanotube composite-based high-resolution mesh flexible transparent conducting electrodes (FTCEs) is explored. In the selective photonic sintering-based patterning process, a highly soft rubber or thin plastic substrate is utilized to achieve close and uniform contact between the composite layer and photomask, with which uniform light irradiation can be obtained with diminished light diffraction. This well-controlled process results in developing a fine and uniform mesh pattern (≈12 μm). The mesh patternability is confirmed to be dependent on heat distribution in the selectively light-irradiated film and the pattern design for FTCE could be adopted for more precise patterns with desired performance. Moreover, using a very thin substrate could allow the mesh to be positioned closer to the strain-free neutral mechanical plane. Due to strong interfacial adhesion between the mesh pattern and substrate, the mesh FTCE could tolerate severe mechanical deformation without performance degradation. It is demonstrated that a transparent heater with fine mesh patterns on thin substrate can maintain stability after 100 repeated washing test cycles in which a variety of stress situations occurring in combination. The presented highly durable FTCE and simple fabrication processes may be widely adoptable for various flexible, large-area, and wearable optoelectronic devices.

RaRF confers RA resistance by sequestering RAR to the nucleolus and regulating MCL1 in leukemia cells

Retinoic acid (RA) has broad clinical applications for the treatment of various cancers, particularly acute promyelocytic leukemia. However, RA-based therapy is limited by relapse in patients associated with RA resistance, the mechanism of which is poorly understood. Here, we suggest a new molecular mechanism of RA resistance by a repressor, named RA resistance factor (RaRF). RaRF suppressed transcriptional activity of the RA receptor (RAR) by directly interacting with and sequestering RAR to the nucleolus in response to RA. RaRF was highly expressed in RA-resistant leukemia cells and its expression was strongly correlated with RA sensitivity. MCL1 was upregulated by RA treatment upon RaRF depletion, accompanying leukemic myeloblast differentiation, which is negatively regulated by ectopic RaRF expression. Collectively, we propose that RaRF may be a factor in the resistance mechanism and thus a potential target for leukemia therapy using RA.

Multi-layer transfer and lamination (MTL) process assisted by a high-pressure air jet for highly efficient solution-processed polymer light emitting diodes

This research reports fabrication of highly efficient polymer light-emitting diodes (PLEDs) by a thermally activated multi-layer transfer and lamination (MTL) process. As the first stage of the fabrication process, multiple layers consisting of a light-emitting polymer, electron transport/electron injection layer and metal cathode were sequentially deposited onto a hydrophobic low-surface energy self-assembled monolayer (SAM)-coated glass substrate. Subsequently, a very rapid delamination of PLEDs multi-layers from the SAM-coated glass was achieved by applying a high-pressure air jet. The custom air jet system ensures the excellent multi-film quality and also prevents the occurrence of common buckling and cracks. In addition, the adhesiveness of polyamide (PA) onto polyethylene terephthalate (PET), which serves as a protective barrier from atmospheric water and oxygen, is thermally activated by heating PA above its glass transition temperature. Finally, once delaminated from the PA/PET, the multi-layer structure (light-emitting polymer/electron transport layer/electron injection layer/metal cathode) was successfully laminated onto the target glass (hole transport layer/transparent anode) with a soft roller under mild pressure for the realization of the PLED device. The maximum brightness of the device fabricated by a thermally activated lamination process was around 13 120 cd m^-2 at 8.4 V, whereas the maximum current efficiency and the power efficiency were 5.2 cd A^-1 and 4.0 lm W^-1, respectively.

Rapid and conformal coating of polymer resins by airbrushing for continuous and high-speed roll-to-roll nanopatterning: parametric quality controls and extended applications

We present a facile and scalable coating method based on controlled airbrushing, which is suitable for conformal resin coating in continuous roll-to-roll (R2R) nanoimprint lithography (NIL) process. By controlling the concentration of UV-curable polymeric resin with mixing the volatile solvent and its airbrushing time, the coated resin film thickness can be readily tuned. After R2R NIL using a flexible nanoscale line pattern (nanograting) mold is conducted upon the airbrushed resin film, a large-area uniform nanograting pattern is fabricated with controlled residual layer thickness (RLT) based on the initial film thickness. We investigate the faithful airbrushing condition that can reliably create the uniform thin films as well as various nanopatterns with controlled morphologies. Using more diluted resin and shorter airbrushing time can reduce the RLTs favourably for many applications, yet is apt to induce the nanoscale pores and discontinued lines. We also discuss how to further improve the quality and scalability of resin airbrushing and its potential applications particularly requiring high-speed and conformal coating on highly topographic and flexible surfaces.

Optical Properties of Hybrid Inorganic/Organic Thin Film Encapsulation Layers for Flexible Top-Emission Organic Light-Emitting Diodes

Inorganic/organic hybrid thin film encapsulation layers consist of a thin Al2O3 layer together with polymer material. We have investigated optical properties of thin film encapsulation layers for top-emission flexible organic light-emitting diodes. The transmittance of hybrid thin film encapsulation layers and the electroluminescent spectrum of organic light-emitting diodes that were passivated by hybrid organic/inorganic thin film encapsulation layers were also examined as a function of the thickness of inorganic Al203 and monomer layers. The number of interference peaks, their intensity, and their positions in the visible range can be controlled by varying the thickness of inorganic Al2O3 layer. On the other hand, changing the thickness of monomer layer had a negligible effect on the optical properties. We also verified that there is a trade-off between transparency in the visible range and the permeation of water vapor in hybrid thin film encapsulation layers. As the number of dyads decreased, optical transparency improved while the water vapor permeation barrier was degraded. Our study suggests that, in top-emission organic light-emitting diodes, the thickness of each thin film encapsulation layer, in particular that of the inorganic layer, and the number of dyads should be controlled for highly efficient top-emission flexible organic light-emitting diodes.

Organic photovoltaic cells: from performance improvement to manufacturing processes

Organic photovoltaics (OPVs) have been pursued as a next generation power source due to their light weight, thin, flexible, and simple fabrication advantages. Improvements in OPV efficiency have attracted great attention in the past decade. Because the functional layers in OPVs can be dissolved in common solvents, they can be manufactured by eco-friendly and scalable printing or coating technologies. In this review article, the focus is on recent efforts to control nanomorphologies of photoactive layer and discussion of various solution-processed charge transport and extraction materials, to maximize the performance of OPV cells. Next, recent works on printing and coating technologies for OPVs to realize solution processing are reviewed. The review concludes with a discussion of recent advances in the development of non-traditional lamination and transfer method towards highly efficient and fully solution-processed OPV.

Roll-to-roll cohesive, coated, flexible, high-efficiency polymer light-emitting diodes utilizing ITO-free polymer anodes

This paper reports solution-processed, high-efficiency polymer light-emitting diodes fabricated by a new type of roll-to-roll coating method under ambient air conditions. A noble roll-to-roll cohesive coating system utilizes only natural gravity and the surface tension of the solution to flow out from the capillary to the surface of the substrate. Because this mechanism uses a minimally cohesive solution, the roll-to-roll cohesive coating can effectively realize an ultra-thin film thickness for the electron injection layer. In addition, the roll-to-roll cohesive coating enables the fabrication of a thicker polymer anode film more than 250 nm at one time by modification of the surface energy and without wasting the solution. It is observed that the standard sheet resistance deviation of the polymer anode is only 2.32 Ω/□ over 50 000 bending cycles. The standard sheet resistance deviation of the polymer anode in the different bending angles (0 to 180°) is 0.313 Ω/□, but the case of the ITO-PET is 104.93 Ω/□. The average surface roughness of the polymer anode measured by atomic force microscopy is only 1.06 nm. Because the surface of the polymer anode has a better quality, the leakage current of the polymer light-emitting diodes (PLEDs) using the polymer anode is much lower than that using the ITO-PET substrate. The luminous power efficiency of the two devices is 4.13 lm/W for the polymer anode and 3.21 lm/W for the ITO-PET. Consequently, the PLEDs made by using the polymer anode exhibited 28% enhanced performance because the polymer anode represents not only a higher transparency than the ITO-PET in the wavelength of 560 nm but also greatly reduced roughness. The optimized the maximum current efficiency and power efficiency of the device show around 6.1 cd/A and 5.1 lm/W, respectively, which is comparable to the case of using the ITO-glass.

Roll-to-Roll Nanoimprinting Metamaterials

We investigated continuous fabrication of a large area 2-D metamaterial comprising a metal dot array on a dielectric coated substrate. We demonstrated patterning of metal dots arrays of varying patterns and shapes with diameter of about 2.5 μm and metal-to-metal spacing from 0.3 to 2.5 μm using a nano-imprinting stamp on a roller. The pattern was first fabricated on a standard photolithography mask, reproduced onto a silicon wafer master mold, and then transferred to a flexible polymer mold that was wrapped around a metal roller. The method was used to pattern a thin Al layer on top of SiO2 on a flexible polymer substrate. The aluminum was coated with a resist and the roller moved over the substrate with adjustable speed and pressure to imprint the fine pattern into the resist. The resist was cured, and a very thin layer of residual resist was removed by RIE, followed by a standard etching treatment for patterning the aluminum layer.

The as-etched pattern had very few defects and the optical properties of the metamaterial were excellent and correlated well with simulations. This work has shown that low cost, rapid roll-to-roll processing of 2-D metamaterial structures is possible.

Fabrication and characterization of WO3/Ag/WO3 multilayer transparent anode with solution-processed WO3 for polymer light-emitting diodes

The dielectric/metal/dielectric multilayer is suitable for a transparent electrode because of its high-optical and high-electrical properties; however, it is fabricated by an expensive and inefficient multistep vacuum process. We present a WO3/Ag/WO3 (WAW) multilayer transparent anode with solution-processed WO3 for polymer light-emitting diodes (PLEDs). This WAW multilayer not only has high transmittance and low resistance but also can be easily and rapidly fabricated. We devised a novel method to deposit a thin WO3 layer by a solution process in an air environment. A tungstic acid solution was prepared from an aqueous solution of Na2WO4 and then converted to WO3 nanoparticles (NPs) by a thermal treatment. Thin WO3 NP layers form WAW multilayer with a thermal-evaporated Ag layer, and they improve the transmittance of the WAW multilayer because of its high transmittance and refractive index. Moreover, the surface of the WO3 layer is homogeneous and flat with low roughness because of the WO3 NP generation from the tungstic acid solution without aggregation. We performed optical simulation and experiments, and the optimized WAW multilayer had a high transmittance of 85% with a sheet resistance of 4 Ω/sq. Finally, PLEDs based on the WAW multilayer anode achieved a maximum luminance of 35,550 cd/m2 at 8 V, and this result implies that the solution-processed WAW multilayer is appropriate for use as a transparent anode in PLEDs.

Complementary treatment of siTERT for improving the antitumor effect of TERT-specific I-131 therapy

Sodium iodide symporter (NIS)-based radionuclide therapy provides an effective means of treating malignant tumors. However, it is sometimes inadequate because of limited effects on radio-resistant tumors, and thus, combination therapies with other therapeutic options have been requested to enhance its efficacy. Human telomerase reverse transcriptase (hTERT) has been reported to be involved in the progression of most cancers and also been viewed as a good candidate for targeting tumor. Application of TERT-specific radionuclide therapies using NIS gene transfer have been reported to treat TERT-positive tumors, but this approach only demonstrated tumor regression rather than eradication. As inhibiting TERT expression by introducing the hTERT-specific shRNA (siTERT) has been suggested as a therapeutic option, we investigated the complementary role of siTERT treatment after the TERT-specific I-131 therapy and its possibility as a novel anticancer therapeutic strategy. Retroviruses containing TERT promoter/NIS for TERT specific Radionuclide therapy and siTERT for TERT targeting antisense therapy were produced. Hep3B cells expressing TERT specific NIS (Hep3B-TERT/NIS) were xenografted into nude mouse and visualized with micro-SPECT/CT for monitoring NIS activity. The levels of hTERT mRNA, protein and its activity were confirmed by RT-PCR, Western blotting and Telomerase repeat amplification protocol assay. Cell proliferation was monitored by MTT assay and induced apoptosis was confirmed by Annexin-V-PI staining. Therapeutic effects of I-131 and/or siTERT were evaluated by clonogenic assay and mouse tumor model. Reduction of hTERT mRNA, protein and TERT activity by siTERT were observed in Hep3B-TERT/NIS cells. The viabilities of the infected cells were significantly decreased to 50% versus siScramble treated controls. The early apoptotic cell population was increased by siTERT. The survival rates of cells treated with siTERT or I-131 alone were 72.4±7.6% and 56.2±5.2%, respectively. However, the survival rate of cells treated with I-131 and siTERT were decreased to 22.1±2.8%. From mouse xenograft model, we also found that the siTERT gene therapy showed synergism to the radioiodine therapy for reducing tumor growth in vivo. Our Results suggested that complementary siTERT gene therapy offers a novel strategy of cancer therapy to improve the therapeutic efficacy of TERT-specific I-131.

Effect of a synthetic peroxisome proliferator-activated receptor-gamma (PPARγ) ligand on breast cancer cells

e14638

Background: Peroxisome proliferator-activated receptor-gamma (PPARγ) ligands have been identified as a potential source of therapy for human cancers. And, it is reported that PPAR-γ ligands could serve as negative regulators of breast cancer development and progression, but their mechanism is still unknown. The purpose of this study was to determine whether the PPAR- γ ligand induces cell cycle arrest and apoptosis of MDA-MB-231(ERα-negative) and MCF-7(ERα-positive) breast cancer cell. Methods: The effect of PPAR-γ ligands on the cell viability of breast cancer cells was determined using mitochondrial tetrazolium(MTT) assay. The cell cycle distribution and apoptosis induction were evaluated by using the flow cytometry. The expression of apoptosis-related proteins were measured with Western blot analysis. Results: The treatment of MDA-MB- 231 cell with PPAR-γ ligand, troglitazone was shown to induce cell cycle G1 arrest and induction of apoptosis. Moreover, troglitazone treatment, applied in a dose-dependent manner, caused a marked decrease in phosphorylated retinoblastoma(pRb), cyclin D1, D2, D3, cyclin dependent kinase(Cdk) 2, 4, and 6 expression as well as a significant increase in Cdk inhibitor, p21 and p27. Troglitazone showed antiproliferative effect on MCF-7 cell with tamoxifen, respectively and synergically. Troglitazone and tamoxifen could induce G1 arrest and apoptosis of MCF-7 cell, through upregulation of Bax and downregulation of Bcl-2 and cyclin D1. Conclusions: PPAR-γ ligand, troglitazone induces cell cycle arrest and apoptosis of MDA-MB-231 cell and increases the sensitivity of anti-hormonal therapy in MCF-7 cell. These results suggest that troglitazone has anticancer effect on both ERα-negative and positive breast cancer cells.

No significant financial relationships to disclose.

GSTP1 promoter hypermethylation during breast cancer development

Abstract #5042

Background. Promoter hypermethylation in precursor lesions of the breast cancer may be biomarkers of cancer risk and targets for cancer chemoprevention. GSTP1 is inactivated by promotor hypermethylation in invasive breast cancers. However, little is known about epigenetic silencing of GSTP1 gene by promoter hypermethylation in precursor lesions.
 Method. To determine the significance of GSTP1 promoter hypermethylation in breast carcinogenesis, methylation status of GSTP1 gene was studied by nested methylation-specific PCR and GSTP1 expression was studied by immunohistochemistry in invasive ductal carcinoma (IDC), ductal carcinoma in situ (DCIS), usual ductal hyperplasia (UDH) and normal breast tissue.
 Results. GSTP1 promoter hypermethylation was detected in 4/24 (16.7%) of UDH, 18/49 (36.7%) of DCIS, and 14/36 (38.9%) of IDC. No hypermethylation was detected in normal breast tissues. GSTP1 promoter hypermethylation was found to be progressively elevated during breast carcinogenesis (P < 0.01). GSTP1 promoter hypermethylation was associated with loss of GSTP1 expression (P < 0.01 for UDH, P < 0.001 for DCIS and IDC).
 Conclusion. Our results suggest that GSTP1 promoter hypermethylation is an early event in breast carcinogenesis and appears to functionally silence GSTP1 expression. GSTP1 promoter hypermethylation in the precursor lesions of breast cancer may be used as a target for cancer chemoprevention.

Citation Information: Cancer Res 2009;69(2 Suppl):Abstract nr 5042.

Induction of cell cycle arrest and apoptosis in breast cancer cells by troglitazone, a peroxisome proliferator-activated receptor-gamma (PPAR-γ) ligand

Abstract #5034

Background: Peroxisome proliferator-activated receptor-gamma(PPAR-γ) ligands inhibit cell proliferation and induce apoptosis in cancer cells. And, it is reported that PPAR-γ ligands could serve as negative regulators of breast cancer development and progression, but their mechanism is still unknown. Here we wished to determine whether the PPAR-γ ligand induces cell cycle arrest and apoptosis of MDA-MB-231(ERα-negative) and MCF-7(ERα-positive) breast cancer cell.
 Methods: The effect of PPAR-γ ligands on the cell viability of breast cancer cells was determined using mitochondrial tetrazolium(MTT) assay. The cell cycle distribution and apoptosis induction were evaluated by using the flow cytometry. The expression of apoptosis-related proteins were measured with Western blot analysis. Statistical analysis was performed using Student's t test, and p<0.05 was considered significant.
 Results: The treatment of MDA-MB-231 cell with PPAR-γ ligand, troglitazone was shown to induce cell cycle G1 arrest and induction of apoptosis. Moreover, troglitazone treatment, applied in a dose-dependent manner, caused a marked decrease in phosphorylated retinoblastoma(pRb), cyclin D1, D2, D3, cyclin dependent kinase(Cdk) 2, 4, and 6 expression as well as a significant increase in Cdk inhibitor, p21 and p27. Troglitazone showed antiproliferative effect on MCF-7 cell with tamoxifen, respectively and synergically. Troglitazone and tamoxifen could induce G1 arrest and apoptosis of MCF-7 cell, through upregulation of Bax and downregulation of Bcl-2 and cyclin D1.
 Conclusion: PPAR-γ ligand, troglitazone induces cell cycle arrest and apoptosis of MDA-MB-231 cell and increases the sensitivity of anti-hormonal therapy in MCF-7 cell. These results suggest that troglitazone has anticancer effect on both ERα-negative and positive breast cancer cells.

Citation Information: Cancer Res 2009;69(2 Suppl):Abstract nr 5034.

Phosphoinositide 3-OH kinase p85alpha and p110beta are essential for androgen receptor transactivation and tumor progression in prostate cancers

Phosphoinositide 3-OH kinases (PI3Ks) are a group of major intracellular signaling molecules. In our previous study, we found that inhibition of PI3K activity suppressed the androgen receptor (AR)-mediated gene expression in prostate cancer cells. The AR has been considered as a critical determinant for the development and progression of human prostate cancers. In this study, we sought to identify the PI3K isoforms involved in AR transactivation. Using a gene-specific small interference RNA (siRNA) approach, we determined that the regulatory isoform p85alpha and the catalytic isoform p110beta, but not p110alpha, were required for androgen-stimulated AR transactivation and cell proliferation in prostate cancer cells. Consistently, overexpression of wild-type p110beta but not p110alpha gene led to androgen-independent AR transactivation. Silencing p110beta gene in prostate cancer cells abolished tumor growth in nude mice. Of the dual (lipid and protein) kinase activities, p110beta's lipid kinase activity was required for AR transactivation. Further analysis by a chromatin immunoprecipitation assay showed that p110beta is indispensable for androgen-induced AR-DNA interaction. Finally, gene expression analysis of clinical specimens showed that both p85alpha and p110beta were highly expressed in malignant prostate tissues compared to the nonmalignant compartments, and their expression levels correlated significantly with disease progression. Taken together, our data demonstrated that p85alpha and p110beta are essential for androgen-stimulated AR transactivation, and their aberrant expression or activation might play an important role in prostate cancer progression.

Development of Canine Systemic Lupus Erythematosus Model

The purpose of this study was to develop a model for canine systemic lupus erythematosus. Systemic lupus erythematosus (SLE) is a systemic autoimmune syndrome defined by clinical and serological features, including arthritis, glomerulonephritis, dermatitis and autoantibodies. SLE was induced in eight normal dogs by immunization with heparan sulphate, the major glycosaminoglycan of the glomerular basement membrane. All the heparan sulphate-immunized dogs showed mild-to-moderate levels of proteinuria and skin disease. Cutaneous signs associated with SLE including alopecia, erythema, crusting, scaling and seborrhoea were observed. Immunohistological examination of the skin lesions revealed deposition of immunoglobulin M and complement in the dermal-epidermal junction. Three of eight dogs showed lameness. The antinuclear antibody tests were positive with the antibody titres higher than 1:128. Therefore, this experimental SLE model could be useful for studying immune-mediated skin disease and autoimmunity.

The heme pocket afforded by Gly117 is crucial for proper heme ligation and activity of CooA

CooA, a CO-sensing homodimeric transcription activator from Rhodospirillum rubrum, undergoes a conformational change in response to CO binding to its heme prosthetic group that allows it to bind specific DNA sequences. In a recent structural study (Lanzilotta, W. N., Schuller, D. J., Thorsteinsson, M. V., Kerby, R. L., Roberts, G. P., and Poulos, T. L. (2000) Nat. Struct. Biol. 7, 876-880), it was suggested that CO binding to CooA results in a modest repositioning of the C-helices that serve as the dimer interface. Gly(117) is one of the residues on the C-helix within 7 A of the heme iron on the Pro(2) side of the heme in CooA. Analysis of a series of Gly(117) variants revealed altered CO-sensing function and heme ligation states dependent on the size of the substituted amino acid at this position; bulky substitutions perturbed CooA both spectrally and functionally. A combination of spectroscopic and mutagenic studies showed that a representative Gly(117) variant, G117I CooA, was specifically perturbed in its Pro(2) ligation in both Fe(III) and Fe(II) forms, but comparison with other CooA variants indicated that perturbation of Pro(2) ligation is not the basis for the lack of CO response in G117I CooA. These results have led to the hypothesis that (i) the heme and the C-helix region move toward each other following CO binding and the interaction of the heme with the C-helix is crucial for CooA activation, and (ii) this event occurs only when a properly sized heme pocket is afforded.

Redox-mediated transcriptional activation in a CooA variant

CooA, the carbon monoxide-sensing transcription factor from Rhodospirillum rubrum, binds CO at a reduced (Fe(II)) heme moiety with resulting conformational changes that promote DNA binding. In this study, we report a variant of CooA, M124R, that is active in transcriptional activation in a redox-dependent manner. Where wild-type CooA is active only in the Fe(II) + CO form, M124R CooA is active in both Fe(II) + CO and Fe(III) forms. Analysis of the pH dependence of the activity of Fe(III) M124R CooA demonstrated that the activity was also coordination state-dependent with a five-coordinate, high-spin species identified as the active form and Cys(75) as the retained ligand. In contrast, the active Fe(II) + CO forms of both wild-type and M124R CooA are six-coordinate and low-spin with a protein ligand other than Cys(75), so that WT and Fe(III) M124R CooA are apparently achieving an active conformation despite two different heme coordination and ligation states. A hypothesis to explain these results is proposed. This study demonstrates the utility of CooA as a model system for the isolation of functionally interesting heme proteins.

Characterization of variants altered at the N-terminal proline, a novel heme-axial ligand in CooA, the CO-sensing transcriptional activator

CooA, the carbon monoxide-sensing transcription factor from Rhodospirillum rubrum, binds CO through a heme moiety resulting in conformational changes that promote DNA binding. The crystal structure shows that the N-terminal Pro(2) of one subunit (Met(1) is removed post-translationally) provides one ligand to the heme of the other subunit in the CooA homodimer. To determine the importance of this novel ligand and the contiguous residues to CooA function, we have altered the N terminus through two approaches: site-directed mutagenesis and regional randomization, and characterized the resulting CooA variants. While Pro(2) appears to be optimal for CooA function, it is not essential and a variety of studied variants at this position have substantial CO-sensing function. Surprisingly, even alterations that add a residue (where Pro(2) is replaced by Met(1)-Tyr(2), for example) accumulate heme-containing CooA with functional properties that are similar to those of wild-type CooA. Other nearby residues, such as Phe(5) and Asn(6) appear to be important for either the structural integrity or the function of CooA. These results are contrasted with those previously reported for alteration of the His(77) ligand on the opposite side of the heme.

In vitro and In vivo activities of LB 10827, a new oral cephalosporin, against respiratory pathogens

The in vitro antibacterial activities of LB 10827, a new oral cephalosporin, against common respiratory tract pathogens were compared with those of six beta-lactams (cefdinir, cefuroxime, cefprozil, penicillin G, amoxicillin-clavulanate, and ampicillin), two quinolones (trovafloxacin and ciprofloxacin), and one macrolide (clarithromycin). The MIC of LB 10827 at which 90% of the penicillin-resistant strains of Streptococcus pneumoniae tested were inhibited was 0.5 microg/ml, and the drug was 4- to 32-fold more active than the compared beta-lactams. The potent activity of LB 10827 against Haemophilus influenzae and Moraxella catarrhalis was retained, and the presence of beta-lactamase in both strains had little effect on the in vitro activity of the compound. Time-kill studies revealed that LB 10827 had bactericidal activity against these respiratory pathogens. This agent reduced original counts of all pathogens tested by >/=3 log(10) CFU/ml at the MIC, and the regrowth was completely prevented for 12 h. The potent in vitro antibacterial activity of LB 10827 against respiratory pathogens has been proved in both mouse pneumonia and neutropenic rat models. These results strongly suggest that this agent has potential for the treatment of respiratory tract infections.

Synthesis and antibacterial activities of novel C(3)-aminopyrimidinyl substituted cephalosporins including against respiratory tract pathogens

The variety of cephalosporins 1 and 2 which possessed C(3)-aminopyrimidinyl substituents were prepared and evaluated for their antibacterial activities. They exhibited excellent in vitro activities especially against respiratory tract pathogens such as penicillin resistant Streptococcus pneumonia. Moraxella catarrhalis and Haemophilus influenza.

Enhanced sensitivity of Streptomyces seoulensis to menadione by superfluous lipoamide dehydrogenase

Lipoamide dehydrogenase from Streptomyces seoulensis could facilitate menadione-mediated cytochrome c reduction, which was mostly inhibited by superoxide dismutase, indicating the obvious involvement of superoxide radical anion. In this reaction, the production of superoxide radical anion occurred via a menadione semiquinone radical anion. When exposed to menadione, lipoamide dehydrogenase-overexpressing cells showed a much lower survival rate with a concomitant decrease of intracellular protein thiol than the wild-type strain. These results suggest that lipoamide dehydrogenase is a facilitating agent in the redox cycling of quinone compounds in vivo as well as in vitro and could inevitably increase the potential toxicity of the compounds.

Sepiapterin reductase producing L-threo-dihydrobiopterin from Chlorobium tepidum

A novel type of NADPH-dependent sepiapterin reductase, which catalysed uniquely the reduction of sepiapterin to l-threo-dihydrobiopterin, was purified 533-fold from the cytosolic fraction of Chlorobium tepidum, with an overall yield of 3%. The native enzyme had a molecular mass of 55 kDa and SDS/PAGE revealed that the enzyme consists of two subunits with a molecular mass of 26 kDa. The enzyme was optimally active at pH8.8 and 50 degrees C. Apparent Km values for sepiapterin and NADPH were 21 and 6.2 microM, respectively, and the kcat value was 5.0 s-1. Diacetyl could also serve as a substrate, with a Km of 4.0 mM. The inhibitory effects of N-acetylserotonin, N-acetyldopamine and melatonin were very weak. The Ki value of N-acetyldopamine was measured as 400 microM. The N-terminal amino acid sequence was revealed as Met-Lys-His-Ile-Leu-Leu-Ile-Thr-Gly-Ala-Xaa-Lys - Lys - Ile - Xaa - Arg - Ala - Ile - Ala - Leu - Glu - Xaa - Ala - Arg - Xaa-Xaa-Xaa-His-His-His-, which shared relatively high sequence similarity with other sepiapterin reductases.

Lipoamide dehydrogenase from streptomyces seoulensis: biochemical and genetic properties

Lipoamide dehydrogenase was purified around 22-fold relative to the crude extracts of Streptomyces seoulensis with an overall yield of 9. 5%. The enzyme was composed of two identical subunits with a molecular mass of 54 kDa and contained 1 mol of FAD per mol of subunit. The absorption spectra of the enzyme revealed the absorption maxima of flavoprotein at 272, 349, and 457 nm. Catalytically active two-electron reduced lipoamide dehydrogenase was produced by anaerobic reduction with one equivalent of NADH. Addition of excess amount of NADH led to the four-electron reduced lipoamide dehydrogenase. The reaction of the enzyme in the reduction reaction of lipoamide or lipoic acid could be explained by a ping-pong mechanism like many other lipoamide dehydrogenases reported earlier. The enzyme also catalysed the reduction of various quinone compounds with NADH as electron donor via a ping-pong mechanism. The enzyme can catalyse a single electron transfer in case of quinone-reducing process, evidenced by the production of 1, 4-naphthosemiquinone radical anion. The quinone-reducing activity of the enzyme was dramatically inhibited by NAD+, indicating the involvement of four-electron reduced form. The structural gene for the enzyme was cloned using a DNA fragment PCR-amplified with the primers designed from N-terminal and internal amino acid sequences. The deduced amino acid sequence shared striking similarity with those of lipoamide dehydrogenases from prokaryotes and eukaryotes. The gene was named lpd. All tested Streptomyces contained one homologue of the lpd gene, which is consistent with the fact that most organisms contain only one lipoamide dehydrogenase.

Tepidopterin, 1-O-(L-threo-biopterin-2'-yl)-beta-N-acetylglucosamine from Chlorobium tepidum

A novel pterin compound, designated as tepidopterin, was detected from a thermophilic photosynthetic green sulphur bacterium, Chlorobium tepidum. The amount of tepidopterin inside the cell was estimated to be 2-5 micromol g(-1) dry weight of cell. This compound was purified through a high performance liquid chromatography using preparative DeltaPak C18 column. This compound was characterized by chromatographic behavior and by absorption and fluorescence properties. Its structure was determined to be 1-O-(L-threo-biopterin-2'-yl)-beta-N-acetylglucosamine by 1D- and 2D-NMR spectroscopy, mass spectrometry and CD. The relative amount of tetrahydrotepidopterin was estimated to be 96.7% inside the cell, that of dihydrotepidopterin 2.9%, and that of fully oxidized tepidopterin 0.4%. The amount of tepidopterin within the cell increased continuously until the beginning of the stationary phase of the cell growth.

Unique isozymes of superoxide dismutase in Streptomyces griseus

Two unique isozymes of superoxide dismutase (EC 1.15.1.1) were purified to apparent homogeneity from Streptomyces griseus by a purification procedure consisting of ammonium sulfate precipitation and chromatographies on DEAE Sephacel, Sephacryl S-200, and DEAE 5PW. Superoxide dismutase I was composed of four identical subunits of 13.0 kDa. The absorption spectrum of superoxide dismutase I exhibited absorption bands at 276 and 378 nm and a broad shoulder at 530 nm. The g values of electron paramagnetic resonance spectrum of superoxide dismutase I were g1 = 2.304, g2 = 2.248, and g3 = 2.012 and the resonance centered at g3 = 2.012 was split into triplet, indicating nickel-containing superoxide dismutase. Superoxide dismutase I contained 0.89 g-atom of nickel per mole of 13.0-kDa subunit. Superoxide dismutase II was composed of four identical subunits of 22.0 kDa. The absorption spectrum of superoxide dismutase II showed the featureless absorption band in the range of 300-500 nm. The g values of electron paramagnetic resonance spectrum of superoxide dismutase II were gz = 4.762, gx = 4.072, and gy = 3.742, indicating iron-containing superoxide dismutase. Superoxide dismutase II uniquely contains 0.40 g-atom of iron per mole of monomer as well as 0.43 g-atom of zinc per mole of monomer. The immunological cross-reactivity between two isozymes was not found. Nickel-containing superoxide dismutase was widely distributed within the genus Streptomyces; however, iron- and zinc-containing superoxide dismutase was not found in S. albus and S. longisporoflavus, on the basis of the immunological cross-reactivity.