Hard-and-Soft Integration Strategy for Preparation of Exceptionally Stable Zr(Hf)-UiO-66 via Thiol-Ene Click Chemistry

MOFabric: an effective and wearable protective garment towards CWA detoxification

In current trends, an imminent development of self-detoxification filters is highly desirable against exposure to chemical warfare agents (CWAs). Exploiting protective materials that can be applicable in day-to-day life for instantaneous detoxification will be of immense importance. The available technologies in the current scenario are susceptible to secondary emission and pose a need for an alternate design strategy for effective degradation. In addition, the choice of active material and successful impregnation on a suitable substrate for developing potential barriers requires complex material design. In this context, the developed self-standing UiO-66 and UiO-66-NH2 functionalized fabrics (MOFabrics) present an expeditious detoxification performance against CWA simulant, methyl-paraoxon, with a maximum removal percent conversion of 88.9 and 90.68%. It shows a reduced half-life of approximately 10.16 and 11.23 min, in comparison to an unmodified/carboxymethylated fabric of 462 min.

Heating-induced adsorption promoting the efficient removal of toluene by the metal-organic framework UiO-66 (Zr) under visible light

The removal of indoor/outdoor toluene by photocatalysis has drawn much attention due to its low energy consumption and easy availability. However, light inevitably generates heat, and pollutants desorb from catalysts as the temperature rises, which is not beneficial to degradation. Contrast to the frequently occurred phenomena, we firstly found that the adsorption capacity of UiO-66 (Zr) on toluene increased with increasing temperature as adsorption isotherms and in-situ Fourier transform infrared spectra (in-situ FTIR) showed. The optimum temperature was 30 °C. This stage in which adsorption capacity was positively correlated with temperature was called heating-induced adsorption, which achieved a toluene removal efficiency of 69.6 %. By density functional theory (DFT) calculations and changing the metal centers and organic ligands of UiO-66 (Zr) respectively, we disclosed that the heating-induced adsorption was mainly related to the π-π stacking interaction of MOF ligands and toluene. The analysis of samples before and after adsorption showed that the interaction between UiO-66 (Zr) and adsorbed toluene facilitated the charge transfer and prolonged the carrier lifetime, leading to the increase of hydroxyl radicals (•OH) in photocatalysis. Therefore, a synergistic effect between heating-induced adsorption and photocatalysis was proposed by analyzing the adsorption of toluene on UiO-66 (Zr) in detail. This work provided new viewpoint to understand the role of concomitant heat contributed to the adsorption and degradation of toluene during photocatalysis.

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

Continuous-imprinted-layer nanofiber membrane with MXene-based precise-designed nanocages for high-accuracy recognition and separation of shikimic acid

Ti₃C₂T_x (MXene) has attracted extensive attention from scholars at home and abroad due to its rich surface termination functional groups and two-dimensional multilayer structure. In this work, MXene was introduced to the membrane by vacuum-assisted filtration processes, and the formed interlayer channel facilitated the construction of recognition sites and molecular transmission. In this paper, PDA@MXene@PDA@SiO₂-PVDF dual-imprinted mixed matrix membrane (PMS-DIMs) were developed by the cooperative dual-imprinting strategy, which was used for the adsorption of shikimic acid (SA). Firstly, SiO₂-PVDF nanofiber basement membrane were prepared by electrospinning method and the first Polydopamine (PDA)-based imprinted layer was constructed on the membrane. PDA not only realized the imprinting process, PDA modification was used to give MXene nanosheets better antioxidant properties and to confer the SiO₂-PVDF nanofiber membrane the interface stability. After that, the second-imprinted sites were constructed on the stacked MXene nanosheets surface as well as between the layers. The SA dual-imprinted sites significantly increased the efficiency of the selective adsorption efficiency, when the template molecule passed through the membrane, the cooperative dual-imprinting strategy enabled multiplex recognition and adsorption of template molecules. As a consequence, which greatly improving the rebinding ability(262.17 g m^-2), and mselectivity factors (β_Catechol/SA, β_P-HB/SA, β_P-NP/SA were 2.34, 4.50 and 5.68). High stability proved the potentials of the PMS-DIMs for practical application. Precise SA-recognition sites were constructed on the PMS-DIMs, PMS-DIMs not only exhibit excellent selective rebinding properties but also have high permeability.

Investigation of grafting silane coupling agents on superhydrophobicity of carbonyl iron/SiO2 particles for efficient oil/water mixture and emulsion separation

The present study demonstrated the wettability properties of grafting silane coupling agents on carbonyl iron (CI)/SiO₂ particles for efficient oil/water mixture and emulsion separation. CI particles were first reacted with Tetraethoxysilane (TEOS) to create a magnetic component. Then, CI/SiO₂ particles were altered by 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS) and Hexamethyldisilazane (HDMS) to create magnetic superhydrophobic/superoleophilic, recyclable, and reusable sorbent powders. The water contact angle (WCA) values of the as-prepared particles, CI, CI/SiO₂, CI/SiO₂@FAS, and CI/SiO₂@HMDS, were 5.4° ± 1.3°, 6.4° ± 1.4°, 151.9° ± 2.1°, and 170.1° ± 1.1°, respectively. In addition, the oil contact angles (OCAs) of a variety of oils were found to be equivalent to 0°. Hence, superhydrophobic/superoleophilic particles for kind of different oils were shown sorption capacities of 1.7-3.1 g/g and 2.5-4.3 g/g for CI/SiO₂@FAS, and CI/SiO₂@HMDS, respectively. Besides, for 1%w/w hexane/water emulsion separation efficiency higher than 99%, the lowest mass was obtained at 50 and 200 mg for CI/SiO₂@HDMS and CI/SiO₂@HDMS, respectively, suggesting a new effective material for separating tiny oil droplets. Also, the reusability and chemical durability of the superhydrophobic samples made them a prime candidate for use in different harsh conditions.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Superhydrophobic nanohybrid sponges for separation of oil/ water mixtures

The industrial revolution has led to different types of environmental pollution, including frequent leakage of crude oil to marine waters and the contamination of wastewater with immiscible or emulsified oils and organic liquids from various industrial residues. Hence, developing multifunctional materials for oil/water separation is a field of high significance for the remediation of oil-polluted water. Recently, advanced superwetting materials have been employed for oily wastewater treatment. This review summarizes the recent development in fabricating superhydrophobic/superoleophilic nanohybrid polyurethane, melamine, and cellulose sponges for oil/water separation. The use of organic and/or inorganic nanohybrid materials opens the horizon for designing a diverse and wide range of superhydrophobic sponges due to the synergistic effect between the surface roughness and chemical composition. The discussion is organized based on different classes of low surface energy materials including thermoplastics, thermosets, elastomers, fluorinated polymers, conductive polymers, organosilanes, long alkyl chain compounds, and hydrophobic carbon-based materials. Recent examples for the separation of both immiscible and emulsified oil/water mixtures are presented, with a focus on fabrication strategies, separation efficiency, recyclability, mechanical performance, and durability. Currently, most studies did not focus on the mechanical/chemical stability of the fabricated sponges, and hence, future research directions shall address the fabrication of robust and long-term durable superhydrophobic sponges with proper guidelines. Similarly, more research focus is required to design superhydrophobic sponges for the separation of emulsified oil/water mixtures and heavy crude oil samples. Superhydrophobic sponges can be employed for treatment of oily wastewater, emulsion separation, and cleanup of crude oil spills.

Synchronous Construction of the Hierarchical Pores and High Hydrophobicity of Stable Metal-Organic Frameworks through a Dual Coordination-Competitive Strategy

Hierarchical-pore construction and functionalities are critical to further extend the applications of some stable MOFs, such as water remediation, fuel purification, oil/water separation, and self-cleaning, which are rarely achieved simultaneously. Herein, we demonstrate a method of synchronously constructing high-hydrophobicity Zr-based metal-organic frameworks with hierarchical pores (HP-UiO-66) through a dual coordination-competitive strategy. The addition of alkanoic acids and Zn²⁺ ions as coordination-competitors could reduce the coordinative degree between the ligand and Zr⁴⁺ ions to effectively induce defect formation. The resulting unsaturated Zr⁴⁺ ions could fully combine with the existing alkanoic acid with a long chain to afford HP-UiO-66 with high-hydrophobicity characteristics. In addition, the particle size of pristine UiO-66 could be adjusted effectively from around 280 to 120 nm using different alkanoic acids when Zn²⁺ ions are not added. This study provided a simple way for effectively controlling the morphology and structure of UiO-66 at the same time. Moreover, this kind of high-hydrophobicity HP-UiO-66 showed potential applications in oil/water separation and selective adsorption of organic mixtures.

Programmable Logic in Metal-Organic Frameworks for Catalysis

Metal-organic frameworks (MOFs) have emerged as one of the most widely investigated materials in catalysis mainly due to their excellent component tunability, high surface area, adjustable pore size, and uniform active sites. However, the overwhelming number of MOF materials and complex structures has brought difficulties for researchers to select and construct suitable MOF-based catalysts. Herein, a programmable design strategy is presented based on metal ions/clusters, organic ligands, modifiers, functional materials, and post-treatment modules, which can be used to design the components, structures, and morphologies of MOF catalysts for different reactions. By establishing the corresponding relationship between these modules and functions, researchers can accurately and efficiently construct heterometallic MOFs, chiral MOFs, conductive MOFs, hierarchically porous MOFs, defective MOFs, MOF composites, and MOF-derivative catalysts. Further, this programmable design approach can also be used to regulate the physical/chemical microenvironments of pristine MOFs, MOF composites, and MOF-derivative materials for heterogeneous catalysis, electrocatalysis, and photocatalysis. Finally, the challenging issues and opportunities for the future research of MOF-based catalysts are discussed. Overall, the modular design concept of this review can be applied as a potent tool for exploring the structure-activity relationships and accelerating the on-demand design of multicomponent catalysts.

Stable Zr-UiO-67 constructed through polymeric network assisted post-synthetic modification and its wettability modulation

Stable Zr-UiO-67 is prepared by introducing a fluorine-containing layer on its surface through a polymeric network assisted post-synthetic modification (PSM) strategy. The stability of the MOFs in acidic, alkaline and saline environments is improved because of the existence of a protective layer. The MOFs are superlyophobic towards liquids with a surface tension threshold of over 48 mN m^-1, making them a potential choice for separating various liquid-liquid mixtures and emulsions.

Microwave-Assisted Solvothermal Synthesis of Covalent Organic Frameworks (COFs) with Stable Superhydrophobicity for Oil/Water Separation

COFs were synthesized by a microwave-assisted solvothermal route, with the building blocks containing 1,3,5-tris(4-aminophenyl) benzene and 2,3,5,6-tetra-fluoroterephthalaldehyde (or 1,4-phthalaldehyde). The -F groups introduced into the benzene ring promoted hydrophobicity and stability of the COFs. The universality and long effectiveness of oil adsorption can be realized when applying COFs as adsorbent. The powder also exhibited excellent water-in-oil emulsions separation performance, with the separation efficiency no lower than 99.5%. In this work, the use of microwave solvothermal synthesis of superhydrophobic COFs is potential to replace the conventional synthesis process and more suitable for industrial scale-up production. Furthermore, the findings provide a new strategy for solving the problem of oil spill treatment and industrial water-in-oil emulsions separation by using the emerging 2D COFs.