Tale of Two Layered Semiconductor Catalysts toward Artificial Photosynthesis

Co-embedding oxygen vacancy and copper particles into titanium-based oxides (TiO2, BaTiO3, and SrTiO3) nanoassembly for enhanced CO2 photoreduction through surface/interface synergy

Photocatalytic CO₂ reduction into valuable fuel and chemical production has been regarded as a prospective strategy for tackling with the issues of the increasing of greenhouse gases and shortage of sustainable energy. A composite photocatalysis system employing a semiconductor enriched with oxygen vacancy and coupled with metallic cocatalyst can facilitate charge separation and transfer electrons. In this work, mesoporous TiO₂ and titanium-based perovskite oxides (BaTiO₃ and SrTiO₃) nanoparticle assembly incorporated with abundant oxygen vacancy and copper particles have been successfully synthesized for CO₂ photoreduction. As an example, the TiO₂ decorated with different amounts of Cu particles has an impact on photocatalytic CO₂ reduction into CH₄ and CO. Particularly, the optimal TiO₂/Cu-0.1 exhibits nearly 13.5 times higher CH₄ yield (22.27 μmol g^-1 h^-1) than that of pristine TiO₂ (1.65 μmol g^-1 h^-1). The as-obtained BaTiO₃/Cu-0.1 and SrTiO₃/Cu-0.1 also show enhanced CH₄ yields towards photocatalytic CO₂ reduction compared with pristine ones. Based on the temperature programmed desorption (TPD) and photo/electrochemical measurements, the co-embedding of Cu particles and abundant oxygen vacancy into the titanium-based oxides could promote CO₂ adsorption capacity as well as separation and transfer of photoinduced electron-hole pairs, and finally result in efficient CO₂ photoreduction upon the TiO₂/Cu, SrTiO₃/Cu, and BaTiO₃/Cu composites.

Controlling C-C coupling in electrocatalytic reduction of CO2 over Cu1-xZnx/C

From the perspective of sustainable environment and economic value, the electroreduction of CO₂ to higher order multicarbon products is more coveted than that of C₁ products, owing to their higher energy densities and a wider applicability. However, the reduction process remains extremely challenging due to the bottleneck of C-C coupling over the catalyst surfaces, and therefore designing a suitable catalyst for efficient and selective electrocatalytic reduction of CO₂ is a need of the hour. With the target of producing C₃₊ products with higher selectivity, in this study we explored the nano-alloys of Cu_1-xZn_x as electrocatalysts for CO₂ reduction. The nano-alloy Cu_1-xZn_x synthesized from the corresponding bimetallic metal organic framework materials demonstrated a gradual enhancement in the selectivity of acetone upon CO₂ electroreduction with higher doping of Zn. The Cu_1-xZn_x alloy opened up a wide possibility of fine-tuning the electronic structure by shifting the position of the d-band centre and modulating the interaction with intermediate CO and thus enhanced the selectivity of desirable products, which might not have been accessible otherwise. The postulated molecular mechanism of CO₂ electroreduction involving the desorption of the poorly adsorbed intermediate CO due to the presence of Zn and spilling over of free CO to Cu sites in the nano-alloy Cu_1-xZn_x for further C-C coupling to yield acetone was corroborated by the first principles studies.

Upconversion nanoparticles coupled with hierarchical ZnIn2S4 nanorods as a near-infrared responsive photocatalyst for photocatalytic CO2 reduction

Developing near-infrared responsive (NIR) photocatalysts is very important for the development of solar-driven photocatalytic systems. Metal sulfide semiconductors have been extensively used as visible-light responsive photocatalysts for photocatalytic applications owing to their high chemical variety, narrow bandgap and suitable redox potentials, particularly the benchmark ZnIn₂S₄. However, their potential as NIR-responsive photocatalysts is yet to be reported. Herein, for the first time demonstrated that upconversion nanoparticles can be delicately coupled with hierarchical ZnIn₂S₄ nanorods (UCNPs/ZIS) to assemble a NIR-responsive composite photocatalyst, and as such composite is verified by ultraviolet-visible diffuse reflectance spectra and upconversion luminescence spectra. As a result, remarkable photocatalytic CO and CH₄ production rates of 1500 and 220 nmol g^-1h^-1, respectively, were detected for the UCNPs/ZIS composite under NIR-light irradiation (λ ≥ 800 nm), which is rarely reported in the literature. The remarkable photocatalytic activity of the UCNPs/ZIS composite can be understood not only because the heterojunction between UCNPs and ZIS can promote the charge separation efficiency, but also the intimate interaction of UCNPs with hierarchical ZIS nanorods can enhance the energy transfer. This finding may open a new avenue to develop more NIR-responsive photocatalysts for various solar energy conversion applications.

2D Molybdenum Sulfide-Based Materials for Photo-Excited Antibacterial Application

Bacterial infections have seriously threatened human health and the abuse of natural or artificial antibiotics leads to bacterial resistance, so development of a new generation of antibacterial agents and treatment methods is urgent. 2D molybdenum sulfide (MoS₂ ) has good biocompatibility, high specific surface area to facilitate surface modification and drug loading, adjustable energy bandgap, and high near-infrared photothermal conversion efficiency (PCE), so it is often used for antibacterial application through its photothermal or photodynamic effects. This review comprehensively summarizes and discusses the fabrication processes, structural characteristics, antibacterial performance, and the corresponding mechanisms of MoS₂ -based materials as well as their representative antibacterial applications. In addition, the outlooks on the remaining challenges that should be addressed in the field of MoS₂ are also proposed.

Photo- and Electrocatalytic Reduction of CO2 over Metal-Organic Frameworks and Their Derived Oxides: A Correlation of the Reaction Mechanism with the Electronic Structure

A Ce/Ti-based bimetallic 2-aminoterephthalate metal-organic framework (MOF) was synthesized and evaluated for photocatalytic reduction of CO₂ in comparison with an isoreticular pristine monometallic Ce-terephthalate MOF. Owing to highly selective CO₂ adsorption capability, optimized band gaps, higher flux of photogenerated electron-hole pairs, and a lower rate of recombination, this material exhibited better photocatalytic reduction of CO₂ and lower hydrogen evolution compared to Ce-terephthalate. Thorough probing of the surface and electronic structure inferred that the reducibility of Ce⁴⁺ to Ce³⁺ was due to the introduction of an amine functional group into the linker, and low-lying Ti(3d) orbitals in Ce/Ti-2-aminoterephthalate facilitated the photoreduction reaction. Both the MOFs were calcined to their respective oxides of Ce_1-xTi_xO₂ and CeO₂, and the electrocatalytic reduction of CO₂ was performed over the oxidic materials. In contrast to the photocatalytic reaction mechanism, the lattice substitution of Ti in the CeO₂ fluorite cubic structure showed a better hydrogen evolution reaction and consequently, poorer electroreduction of CO₂ compared to pristine CeO₂. Density functional theory calculations of the competitive hydrogen evolution reaction on the MOF and the oxide surfaces corroborated the experimental findings.

Photocatalytic Reduction of Aqueous Nitrate with Hybrid Ag/g-C3N4 under Ultraviolet and Visible Light

The concentration of nitrate in natural surface waters by agricultural runoff remains a challenging problem in environmental chemistry. One promising denitrification strategy is to utilize photocatalysts, whose light-driven excited states are capable of reducing nitrate to nitrogen gas. We have synthesized and characterized pristine and silver-loaded graphitic carbon nitrides and assessed their activity for photocatalytic nitrate reduction at neutral pH. While nitrate reduction does occur on the pristine material, the silver cocatalyst greatly enhances product yields. Kinetic studies performed in batch photoreactors under both UV and visible excitation suggest that nitrate reduction to produce aqueous nitrite, ammonium, and nitrogen gas proceeds via a cooperative water reduction on the silver metal domains to produce adsorbed H atoms. By varying the percentage of silver loading onto the g-C₃N₄, the density of metal domains can be adjusted, which in turn tunes the reduction selectivity toward various products.

Highly Selective Photocatalytic CO2 Reduction to CH4 by Ball-Milled Cubic Silicon Carbide Nanoparticles under Visible-Light Irradiation

The ultimate goal of photocatalytic CO2 reduction is to achieve high selectivity for a single product with high efficiency. One of the most significant challenges is that expensive catalysts prepared through complex processes are usually used. Herein, gram-scale cubic silicon carbide (3C-SiC) nanoparticles are prepared through a top-down ball-milling approach from low-priced 3C-SiC powders. This facile mechanical milling strategy ensures large-scale production of 3C-SiC nanoparticles with an amorphous silicon oxide (SiOx) shell and simultaneously induces abundant surface states. The surface states are demonstrated to trap the photogenerated carriers, thus remarkably enhancing the charge separation, while the thin SiOx shell prevents 3C-SiC from corrosion under visible light. The unique electronic structure of 3C-SiC tackles the challenge associated with low selectivity of photocatalytic CO2 reduction to C1 compounds. In conjugation with efficient water oxidation, 3C-SiC nanoparticles can reduce CO2 into CH4 with selectivity over 90%.

Conversion of Biomasses and Copper into Catalysts for Photocatalytic CO2 Reduction

The rapid increase of CO₂ in the atmosphere has caused serious environmental problems. Burning of biomass wastes increases the content of CO₂ in the environment. Herein, we propose a new strategy to convert biomass into photocatalysts for artificial CO₂ reduction. Using a hydrothermal method, carbohydrates from biomass can be converted into hydrothermal carbonaceous carbon (HTCC). The HTCC consists of plenty of sp²-hybridized structures, which are capable of absorbing solar light for photocatalytic CO₂ reduction. Furthermore, with the addition of Cu cocatalysts, higher activity can be obtained for CO₂ reduction. The activity of Cu-HTCC is 32 and 1.7 times higher than that of commercial TiO₂ and pure HTCC, respectively. This method provides a new strategy of trash to treasure, which converts biomass waste into photocatalysts for CO₂ reduction.