Hollow Octahedral Cu2-xS/CdS/Bi2S3 p-n-p Type Tandem Heterojunctions for Efficient Photothermal Effect and Robust Visible-Light-Driven Photocatalytic Performance

Thermal Effect on Photoelectrochemical Water Splitting Toward Highly Solar to Hydrogen Efficiency

Photoelectrochemical (PEC) hydrogen production is an emerging technology that uses renewable solar light aimed to establish a sustainable carbon-neutral society. The barriers to commercialization are low efficiency and high cost. To date, researchers have focused on materials and systems. However, recent studies have been conducted to utilize thermal effects in PEC hydrogen production. This Review provides a fresh perspective to utilize the thermal effects for PEC performance enhancement while delineating the underlying principles and equations associated with efficiency. The fundamentals of the thermal effect on the PEC system are summarized from various perspectives: kinetics, thermodynamics, and empirical equations. Based on this, materials are classified as plasmonic metals, quantum dot-based semiconductors, and photothermal organic materials, which have an inherent response to photothermal irradiation. Finally, the economic viability and challenges of these strategies for PEC are explained, which can pave the way for the future progress in the field.

Hierarchical CdS/Ni3S4/Ni2P@C Photocatalyst for Efficient H2 Evolution under Visible-Light Irradiation

Structural and morphological modulations play a crucial role in increasing the surface active sites of semiconductor photocatalysts for visible-light-driven water splitting. To fabricate a novel CdS/Ni₃S₄/Ni₂P@C heterostructure, we first prepared carbon-encapsulated Ni₃S₄/Ni₂P (Ni₃S₄/Ni₂P@C) with a high surface area by sequential carbonization and phosphorization of a Ni-metal-organic framework (MOF) precursor. Combined characterization and photoelectrochemical measurement results reveal that the assembly of CdS nanowires and highly porous Ni₃S₄/Ni₂P@C can enhance the visible-light response capability of the CdS/Ni₃S₄/Ni₂P@C heterostructure catalyst by reducing the forbidden band gap of CdS. The hydrogen production rate of 21.56 mmol h^-1 g^-1 for CdS/Ni₃S₄/Ni₂P@C with a Ni₃S₄/Ni₂P@C mass fraction of 10 wt % was 26 times higher than that of CdS in a photolytic aquatic hydrogen system. A possible mechanism for the photocatalytic enhancement of the Ni₃S₄/Ni₂P@C co-catalyst was systematically investigated and discussed. This research opens a new strategy for constructing ternary heterojunction photocatalysts via MOF precursors.

Recent Advancements in Photocatalysis Coupling by External Physical Fields

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance, such as artificial photosynthesis, water splitting, pollutants degradation, etc. Despite decades of research, the performance of photocatalysis still falls far short of the requirement of 5% solar energy conversion efficiency. Combining photocatalysis with the other physical fields has been proven to be an efficient way around this barrier which can improve the performance of photocatalysis remarkably. This review will focus on the recent advances in photocatalysis coupling by external physical fields, including Thermal-coupled photocatalysis (TCP), Mechanical-coupled photocatalysis (MCP), and Electromagnetism-coupled photocatalysis (ECP). In this paper, coupling mechanisms, materials, and applications of external physical fields are reviewed. Specifically, the promotive effect on photocatalytic activity by the external fields is highlighted. This review will provide a detailed and specific reference for photocatalysis coupling by external physical fields in a deep-going way.

Co0.9Co0.1S Nanorods with an Internal Electric Field and Photothermal Effect Synergistically for Boosting Photocatalytic H2 Evolution

The paper reports a strategy to synthesize Cd_0.9Co_0.1S nanorods (NRs) via a one-pot solvothermal method. Remarkably, the pencil-shaped Cd_0.9Co_0.1S NRs with a large aspect ratio and good polycrystalline plane structure significantly shorten the photogenerated carrier transfer path and achieve fast separation. An appropriate amount of Co addition enhances visible light-harvesting and generates a photothermal effect to improve the surface reaction kinetics and increases the charge transfer rate. Moreover, the internal electric field facilitates the separation and transfer of carriers and effectively impedes their recombination. As a result, the optimized Cd_0.9Co_0.1S NRs yield a remarkable H₂ evolution rate of 8.009 mmol·g⁻¹·h⁻¹, which is approximately 7.2 times higher than that of pristine CdS. This work improves the photocatalytic hydrogen production rate by tuning and optimizing electronic structures through element addition and using the photothermal synergistic effect.

Hollow Nanoboxes Cu2-x S@ZnIn2 S4 Core-Shell S-Scheme Heterojunction with Broad-Spectrum Response and Enhanced Photothermal-Photocatalytic Performance

Major issues in photocatalysis include improving charge carrier separation efficiency at the interface of semiconductor photocatalysts and rationally developing efficient hierarchical heterostructures. Surface continuous growth deposition is used to make hollow Cu_2-x S nanoboxes, and then simple hydrothermal reaction is used to make core-shell Cu_2-x S@ZnIn₂ S₄ S-scheme heterojunctions. The photothermal and photocatalytic performance of Cu_2-x S@ZnIn₂ S₄ is improved. In an experimental hydrogen production test, the Cu_2-x S@ZnIn₂ S₄ photocatalyst produces 4653.43 µmol h^-1 g^-1 of hydrogen, which is 137.6 and 13.8 times higher than pure Cu_2-x S and ZnIn₂ S₄ , respectively. Furthermore, the photocatalyst exhibits a high tetracycline degradation efficiency in the water of up to 98.8%. For photocatalytic reactions, the hollow core-shell configuration gives a large specific surface area and more reactive sites. The photocatalytic response range is broadened, infrared light absorption enhanced, the photothermal effect is outstanding, and the photocatalytic process is promoted. Meanwhile, characterizations, degradation studies, active species trapping investigations, energy band structure analysis, and theoretical calculations all reveal that the S-scheme heterojunction can efficiently increase photogenerated carrier separation. This research opens up new possibilities for future S-scheme heterojunction catalyst design and development.

Designing Z-scheme AgIO4 nanorod embedded with Bi2S3 nanoflakes for expeditious visible light photodegradation of congo red and rhodamine B

The present study describes the enhanced photodegradation of organic pollutant dyes, congo red (CR) and rhodamine B (RhB) dyes under visible light irradiation. AgIO₄ nanorods decorated on Bi₂S₃ nanoflakes in various proportions were synthesized via sono-chemical route wherein the deposition of varying amounts of AgIO₄ on Bi₂S₃ plays a pivotal role in improving the photodegradation ability. The characterization of the as-synthesized nanohybrids was assessed by XRD, UV-vis DRS, PL, EIS, ESR, FT-IR, XPS, HR-TEM, FE-SEM, N₂ adsorption and desorption techniques. The effect of initial CR and RhB dye concentration, reaction pH and usage of nanohybrid concentration were investigated where 30%-AgIO₄/Bi₂S₃ exhibited excellent visible light photodegradation of 95.58% for CR and 96.11% for RhB dyes at 140 min and 100 min respectively. The superoxide (•O^2-) and hydroxyl radicals (•OH) played predominant role in the photodegradation of CR and RhB which is experimentally confirmed by radical trapping experiments. Also, the photocatalysts exhibited good photo stability and excellent reusability. The TOC analysis confirmed the complete mineralization of CR and RhB dyes by the nanohybrid and the formation of possible intermediate and degradation pathway was delineated based on GC/MS analysis. The outstanding photodegradation performance were ascribed to the Z-scheme charge transfer path, which effectively promotes the separation and transfer of e^-/h⁺ pairs, resulting in a strong redox activity of the accumulated charge to decompose organic dyes during the degradation reaction. The study suggested that the nanohybrid can be utilized for the removal of organic pollutants from the contaminated water bodies.

Coupling solar-driven photothermal effect into photocatalysis for sustainable water treatment

Effectively harnessing renewable and inexhaustible solar radiation for energy conversion has attracted significant research interest in the past decade. Solar thermal conversion, as a ubiquitous phenomenon, can be implemented to evaporate water and concurrently boost photocatalytic performance for addressing freshwater scarcity and energy crisis. Most recently, solar water evaporation accompanied by photocatalytic degradation, sterilization, and hydrogen production has been proposed as a promising avenue to endow new vitality into the field of clean water and energy production. Driven by the advances of rationally designed solar-powered functional materials, a large variety of photothermal-coupled photocatalysis technologies have been exploited. In this context, it is imperative to summarize the recent progress and discuss the challenges in this multidisciplinary field. Herein, we overview photothermal materials based on various fundamental principles and highlight emerging applications in the areas of solar water evaporation, water purification, and solar-driven energy production. Furthermore, the challenges and perspectives toward both fundamental research and practical applications are also proposed. It is envisioned that this review can provide insightful suggestions to further advance the development of integrated solar thermal driven water evaporation and photocatalytic systems to fulfill concurrent energy conversion and environmental applications.

Construction of perylene diimide/CuS supramolecular heterojunction for the highly efficient visible light-driven environmental remediation

Developing photocatalysts that are inexpensive and efficient in degrading pollutants are essential for environmental remediation. Herein, a novel system of perylene diimide (PDI)/CuS p-n heterojunction was synthesized by a two-step self-assembly strategy for removal of tetracycline in waste water. Results showed that PDI/CuS-10% exhibited highest photocatalytic behavior. The apparent rate constants for tetracycline (TC) degradation for the blend were 5.27 and 2.68 times higher than that of CuS or PDI, respectively. The enhancement of photocatalytic activity was mainly attributed to the π-π stacking and p-n junction, which can accelerate the separation of the photo-generated h⁺-e^- pairs. Besides, the light absorption of PDI/CuS from 800 to 200 nm was significantly enhanced and the absorption edge even reached the near-infrared region, which also played an important role in providing desired photocatalytic properties. Surprisingly, PDI/CuS could maintain high catalytic activity even after 5 cycles under simulated conditions, indicating that the composite had high potential for practical applications. Owing to high efficiency, low cost and wide application range, the PDI/CuS nanocomposites are promising candidates for environmental remediation.

Photothermal Chemistry Based on Solar Energy: From Synergistic Effects to Practical Applications

With the development of society, energy shortage and environmental problems have become more and more outstanding. Solar energy is a clean and sustainable energy resource, potentially driving energy conversion and environmental remediation reactions. Thus, solar-driven chemistry is an attractive way to solve the two problems. Photothermal chemistry (PTC) is developed to achieve full-spectral utilization of the solar radiation and drive chemical reactions more efficiently under relatively mild conditions. In this review, the mechanisms of PTC are summarized from the aspects of thermal and non-thermal effects, and then the interaction and synergy between these two effects are sorted out. In this paper, distinguishing and quantifying these two effects is discussed to understand PTC processes better and to design PTC catalysts more methodically. However, PTC is still a little far away from practical. Herein, several key points, which must be considered when pushing ahead with the engineering application of PTC, are proposed, along with some workable suggestions on the practical application. This review provides a unique perspective on PTC, focusing on the synergistic effects and pointing out a possible direction for practical application.

Ag-SPR and semiconductor interface effect on a ternary CuO@Ag@Bi2S3 Z-scheme catalyst for enhanced removal of HIV drugs and (photo)catalytic activity

The development of ternary composites has gained great interest as they can be used as a catalyst due to the different semiconductors with the variation in the band edge positions creates a potential gradient at the composite interface.

Hollow Core-Shell potassium Phosphomolybdate@Cadmium Sulfide@Bismuth sulfide Z-Scheme tandem heterojunctions toward optimized Photothermal-Photocatalytic performance

A hollow core-shell potassium phosphomolybdate (KMoP)@cadmium sulfide (CdS)@bismuth sulfide (Bi₂S₃) Z-scheme tandem heterojunction is fabricated by a simple hydrothermal strategy and kept in a water bath to continue the reaction. At the same time, the ternary structure combined Keggin-type polyoxometalate with two photosensitive sulfide semiconductors to form a stable hollow core-shell heterojunction. KMoP@CdS@Bi₂S₃ with a narrow band gap of ∼ 1.2 eV also has excellent photothermal performance, which may further promote photocatalytic efficiency. The hollow core-shell KMoP@CdS@Bi₂S₃ tandem heterojunction shows excellent H₂ production performance, Cr^VI reduction ability and photocatalytic degradation performance of highly toxic tetracycline (TC). Under visible light irradiation, the photocatalytic H₂ generation rate of the KMoP@CdS@Bi₂S₃ tandem heterojunction reaches 831 μmol h^-1, which is 103 times higher than that of pristine KMoP. The photocatalytic reduction efficiency of Cr^VI and degradation efficiency of TC are as high as 95.5 and 97.51%, ∼4 times higher than that of KMoP. The boosted photocatalytic performance can be ascribed to the formation of core-shell Z-scheme tandem heterojunctions favoring spatial charge separation and the narrow band gap, which extends the photoresponse to visible light/NIR regions. When TC and Cr^VI exist at the same time, the reduction efficiency of Cr^VI can be as high as 99.64% because the intermediate of TC degradation can promote the reduction of Cr^VI. In addition, the photocatalytic performance of the KMoP@CdS@Bi₂S₃ heterojunction remains nearly constant after 4 recycles, which indicates high stability. The design strategy may provide new insights for preparing other high-performance core-shell tandem heterojunction photocatalysts for solar energy conversion.

1D/2D constructed Bi2S3/Bi2O2CO3 direct Z-Scheme heterojunction: A versatile photocatalytic material for boosted photodegradation, photoreduction and photoelectrochemical detection of water-based contaminants

In this work, two-dimensional Bi₂O₂CO₃ disk is synthesized, followed by the growth of Bi₂S₃ over Bi₂O₂CO₃ via topotactic transformation by controlling the amount of thiourea under hydrothermal conditions. The synthesized composite catalyst is investigated for photocatalytic oxidation and reduction of tetracycline hydrochloride and hexavalent chromium under visible light irradiation. High interfacial contact between the Bi₂O₂CO₃ disk0 and Bi₂S₃ fiber is confirmed via high-resolution microscopic imaging. Enhanced light absorption and increased charge carrier separation is observed after the formation of the Bi₂S₃/Bi₂O₂CO₃ composite. The Bi₂S₃/Bi₂O₂CO₃ composite grown using 1 mmol of thiourea shows approximately 98% degradation of tetracycline hydrochloride after 120 min and 99% Cr(VI) reduction after 90 min of photochemical reaction under visible light irradiation. The charge separation is due to the formed internal electric field at the interface, which upon light irradiation follows a z-scheme charge transfer hindering the recombination at the Bi₂S₃ and Bi₂O₂CO₃ interface, thereby contributing efficiently to the photochemical process. In addition, the mechanism of the photochemical reaction for the degradation of pollutants is supported using quencher and probe experiments. Furthermore, photoelectrochemical detection of antibiotic in aqueous solution is conducted to understand the sensing feasibility of the synthesized system.

One-step in situ formation of 3D hollow sphere-like V2O5 incorporated Ni3V2O8 hybrids with enhanced photocatalytic performance

3-D hollow sphere-like Ni₃V₂O₈ immobilizing V₂O₅ nanoparticles were successfully synthesized via in situ recrystallization method without any template. The compact contact between V₂O₅ and Ni₃V₂O₈ ensuring the photo-inducted carriers fast transport, which would be beneficial for inhibiting recombination rate of electron-hole (e^-/h⁺) pairs. Moreover, the hollow sphere-like structure composed of the smaller nanoparticle could effectively improve of visible light capture capacity (multiple scattering for hollow architectures). Benefiting the synergistic promoting effect of the suitable heterojunction and the fascinating 3D hollow feature, the V₂O₅@Ni₃V₂O₈ indicated significantly degradation performance when evaluated as photocatalyst for degradation antibiotics and chlorophenols under visible light irradiation. Impressively, the 2-V₂O₅@Ni₃V₂O₈ heterojunction deliver the optimal degradation efficiency for TC (OTC) and 2,4-DCP (4-CP) were 90.0% (~91.2%) and 92.6% (~90.0%), respectively. The appearance mechanism for the enhancement photocatalytic performance was also elucidated in detail. The facile strategy provides a novel insight into the designing of the photocatalyst with advantages of charges separation and light-harvesting for degradation of contaminants in wastewater.

Hierarchical Co0.85 Se-CdSe/MoSe2 /CdSe Sandwich-Like Heterostructured Cages for Efficient Photocatalytic CO2 Reduction

Fabricating efficient photocatalysts with rapid charge carrier separation and high visible light harvesting is an advisable strategy to improve CO₂ reduction performance. Herein, hierarchical Co_0.85 Se-CdSe/MoSe₂ /CdSe cages with sandwich-like heterostructure are prepared to act as efficient photocatalysts for CO₂ reduction. In this study, the structure and composition of the final products can be regulated through the cation-exchange reaction in the presence of ascorbic acid. In the Co_0.85 Se-CdSe/MoSe₂ /CdSe cages, MoSe₂ nanosheets function as a bridge to integrate Co_0.85 Se-CdSe and CdSe on both sides of the MoSe₂ nanosheet shell into a sandwich-like heterostructured catalyst system, which possesses multiple positive merits for photocatalysis, including accelerated transport and separation of photogenerated carriers, improved visible light utilization, and increased catalytic active sites. Thus, the optimized Co_0.85 Se-CdSe/MoSe₂ /CdSe cages exhibit remarkable visible-light photocatalytic performance and outstanding stability for CO₂ reduction with a high CO average yield of 15.04 µmol g^-1 h^-1 and 90.14% selectivity, which are much higher than those of other control samples including single-component catalysts and binary hybrid catalysts. This study provides a promising way for the design and fabrication of high-efficiency photocatalysts.

Fabrication of S-scheme CdS-g-C3N4-graphene aerogel heterojunction for enhanced visible light driven photocatalysis

Constructing S-scheme heterojunction photocatalysts reveals a greatly improved separation efficiency of photogenerated carriers and enhanced harvesting ability of solar energy in photocatalytic field. Herein, a ternary CdS-g-C₃N₄-GA heterojunction has been fabricated by a facile ultrasound strategy, which behaved as a S-scheme heterojunction with an intimate interface formed, and GA played as an electronic transportation platform to promote the separation of photo-induced charge carriers, which was certified through photoelectrochemical techniques. Density functional theory calculations revealed that the different component in ternary CdS-g-C₃N₄-GA heterojunction demonstrated an obvious difference of work function, resulting in the charge transfer from CdS to g-C₃N₄ through GA with S-scheme principle. In the optimized conditions, the S-scheme CdS-g-C₃N₄-GA heterojunction not only displayed greatly enhanced photocatalytic performances for degradation of dye and antibiotic wastewater, but also improved photocatalytic H₂ production activity. In addition, the photocatalytic mechanism and driving force of charge transfer and separation in S-scheme CdS-g-C₃N₄-GA heterojunction were studied. This study offers a feasible strategy to construct a ternary S-scheme heterojunction for environmental and energy photocatalysis.

Metal Cation Valency Dependence in Morphology Evolution of Cu2-x S Nanodisk Seeds and Their Pseudomorphic Cation Exchanges

A crucial parameter in the design of semiconductor nanoparticles (NPs) with controllable optical, magnetic, electronic, and catalytic properties is the morphology. Herein, we demonstrate the potential of additive metal cations with variable valency to direct the morphology evolution of copper-deficient Cu_2-x S nanoparticles in the process of seed-mediated growth. In particular, the djurleite Cu_1.94 S seed could evolve from disk into tetradecahedron in the presence of tin(IV) cations, whereas they merely formed sharp hexagonal nanodisks with tin(II) cations. In addition to djurleite Cu_1.94 S, the tin(IV) cations could be generalized to direct the growth of roxbyite Cu_1.8 S and covellite CuS nanodisk seeds into tetradecahedra. We further perform pseudomorphic cation exchanges of Cu_1.94 S tetradecahedra with Zn²⁺ and Cd²⁺ to produce polyhedral zinc sulfide (ZnS) and cadmium sulfide (CdS) NPs. Moreover, we achieve Cu_1.8 S/ZnS and Cu_1.94 S/CdS tetradecahedral heterostructures via partial cation exchange, which are otherwise inaccessible by traditional synthetic approaches.

Core–shell carbon colloid sphere@phosphotungstic acid/CdS as a Z-scheme heterojunction with synergistic adsorption, photothermal and photocatalytic performance

Core–shell carbon colloid sphere@phosphotungstic acid/CdS exhibits excellent visible-light-driven photocatalytic performance, which is due to the Z-scheme heterojunction favoring the charge transfer and spatial charge separation and the photothermal effect.