Polymer Modification on the NiOx Hole Transport Layer Boosts Open-Circuit Voltage to 1.19 V for Perovskite Solar Cells

Bi-Directional Modification to Quench Detrimental Redox Reactions and Minimize Interfacial Energy Offset for NiOX/Perovskite-Based Solar Cells

The quality of the buried heterojunction of nickel oxide (NiOX)/perovskite is crucial for efficient charge carrier extraction and minimizing interfacial non-radiative recombination in inverted perovskite solar cells (PSCs). However, NiOX has limitations as a hole transport layer (HTL) due to energy level mismatch, low conduction, and undesirable redox reactions with the perovskite layer, which impede power conversion efficiency (PCE) and long-term stability. In this study, para-amino 2,3,5,6-tetrafluorobenzoic acid (PATFBA) is proposed as a bifacial defect passivator to tailor the NiOX/perovskite interface. The acid group and adjacent fluorine atoms of PATFBA effectively passivate NiOX surface defects, thereby improving its Ni3+/Ni2+ ratio, hole extraction capability, and energy band alignment with perovskite, while also providing active sites for homogenous nucleation. Meanwhile, the amine and adjacent fluorine atomsstabilize the buried perovskite interface by passivating interfacial defects, resulting in higher crystalline perovskite films with supressed non-radaitive recombination. Furthermore, the PATFBA buffer layer prevents redox reactions between Ni3+ and perovskite.These synergistic bi-directional interactions lead to optimized inverted PSCs with a PCE of 20.51% compared to 16.89% for pristine devices and the unencapsulated PATFBA-modified devices exhibit outstanding thermal and long-term stability. This work provides a new engineering approach to buried interfaces through the synergy of functional groups.

The Promise and Challenges of Inverted Perovskite Solar Cells

Recently, there has been an extensive focus on inverted perovskite solar cells (PSCs) with a p-i-n architecture due to their attractive advantages, such as exceptional stability, high efficiency, low cost, low-temperature processing, and compatibility with tandem architectures, leading to a surge in their development. Single-junction and perovskite-silicon tandem solar cells (TSCs) with an inverted architecture have achieved certified PCEs of 26.15% and 33.9% respectively, showing great promise for commercial applications. To expedite real-world applications, it is crucial to investigate the key challenges for further performance enhancement. We first introduce representative methods, such as composition engineering, additive engineering, solvent engineering, processing engineering, innovation of charge transporting layers, and interface engineering, for fabricating high-efficiency and stable inverted PSCs. We then delve into the reasons behind the excellent stability of inverted PSCs. Subsequently, we review recent advances in TSCs with inverted PSCs, including perovskite-Si TSCs, all-perovskite TSCs, and perovskite-organic TSCs. To achieve final commercial deployment, we present efforts related to scaling up, harvesting indoor light, economic assessment, and reducing environmental impacts. Lastly, we discuss the potential and challenges of inverted PSCs in the future.

Enhanced Performance and Stability of Perovskite Solar Cells Through Surface Modification with Benzocaine Hydrochloride

Current development of inverted p-i-n perovskite solar cells (PSCs), with nickel oxide as the hole transport layer, is progressing toward lower net costs, higher efficiencies, and superior stabilities. Unfortunately, the high density of defect-based traps on the surface of perovskite films significantly limits the photoelectric conversion efficiency and operational stability of perovskite solar cells. Finding cost-effective interface modifiers is crucial for the further commercial development of p-i-n PSCs. In the present work, we report a passivation strategy using a multifunctional molecule, benzocaine hydrochloride (BHC), which is shown to reduce defect density and enhance the photovoltaic performance and stability of the resultant p-i-n PSCs. It has been revealed that BHC strongly interacts with perovskite precursor components and triggers the evolution of the perovskite absorber film morphology and enables improved surface energy level alignment, thus promoting charge carrier transport and extraction. These properties are beneficial for improving open-circuit voltage (VOC) and fill factor (FF). Our results show that the photoelectric conversion efficiency (PCE) of p-i-n PSCs with nickel oxide as the hole transport layer increased from an initial 20.0% to 22.1% after being passivated with BHC, and these passivated devices also exhibited improved stability. DFT calculations reveal the unusual ability of the BHC passivant to improve band alignment while also preventing the accumulation of holes at the interface. In this work, the advantages of BHC passivation are demonstrated by linking theoretical calculations with optical and electrical characterizations.

Improved Hole-Selective Contact Enables Highly Efficient and Stable FAPbBr3 Perovskite Solar Cells and Semitransparent Modules

Self-assembled monolayers (SAMs) as the hole-selective contact have achieved remarkable success in iodine-based perovskite solar cells (PSCs), while their impact on bromine-based PSCs is limited due to the poor perovskite crystallization behavior and mismatched energy level alignment. Here, a highly efficient SAM of (2-(3,6-diiodo-9H-carbazol-9-yl)ethyl)phosphonic acid (I-2PACz) is employed to address these challenges in FAPbBr3-based PSCs. The incorporation of I atoms into I-2PACz not only releases tensile stress within FAPbBr3 perovskite, promoting oriented crystallization and minimizing defects through halogen-halogen bond, but also optimizes the energy levels alignment at hole-selective interface for enhanced hole extraction. Ultimately, a power conversion efficiency (PCE) of 11.14% is achieved, which stands among the highest reported value for FAPbBr3 PSCs. Furthermore, the semitransparent devices/modules exhibit impressive PCEs of 8.19% and 6.23% with average visible transmittance of 41.98% and 38.99%. Remarkably, after operating at maximum power point for 1000 h, the encapsulated device maintains 93% of its initial PCE. These results demonstrate an effective strategy for achieving high-performance bromine-based PSCs toward further applications.

Zwitterion Dual-Modification Strategy for High-Quality NiOx and Perovskite Films for Solar Cells

Nickel oxide (NiOx) has been limited in use as a hole transport layer for its low conduction, surface defects, and redox reactions with the perovskite layer. To address these issues, the incorporation of zwitterion L-tryptophan (Trp) is proposed at the NiOx/Trp interface. The carboxyl group of Trp effectively passivates the surface positive defects of NiOx, thereby improving its optical and electrical properties. The ammonium group of Trp not only passivates negative defects but modulates the growth of the perovskite layer, resulting in an improved perovskite film quality. Furthermore, the Trp layer acts as a buffer layer, suppressing adverse interfacial reactions between the perovskite and NiOx. Consequently, perovskite solar cells with 1.56 and 1.68 eV absorbers achieve the champion power conversion efficiency (PCE) of 23.79% and 20.41%, respectively. Moreover, the unencapsulated devices demonstrate excellent long-term stability, retaining above 80% of the initial PCE value after 1600 h of storage in the air with a humidity of 50-60%.

Controlled NiOx Defect Engineering to Harnessing Redox Reactions in Perovskite Photovoltaic Cells via Atomic Layer Deposition

Albeit the undesirable attributes of NiOx, such as low conductivity, unmanageable defects, and redox reactions occurring at the perovskite/NiOx interface, which impede the progress in inverted perovskite solar cells (i-PSCs), it is the most favorable choice of technology for industrialization of PSCs. In this study, we propose a novel Ni vacancy defect modulate approach to leverage the conformal growth and surface self-limiting reaction characteristics of the atomic layer deposition (ALD)-fabricated NiOx by varying the O2 plasma injection time (tOE) to induce self-doping. Consequently, NiOx thin films with enhanced conductivity, an appropriate Ni3+/Ni2+ ratio, stable surface states, and ultrathinness are realized as hole-transporting layers (HTLs) in p-i-n PSCs. As a result of these improvements, ALD-NiOx-based devices exhibit the highest power conversion efficiency (PCE) of 19.86% and a fill factor (FF) of 81.86%. Notably, the optimal interfacial defects effectively suppressed the severe reaction between the perovskite and NiOx. This suppression is evidenced by the lowest decay rate observed in a harsh environment, lasting for 500 consecutive hours. The proposed approach introduces the possibility of a hierarchical distribution of defects and offers feasibility for the fabrication of large-area, uniform, and high-quality films.

Efficient Air-Processed MA-Free Perovskite Solar Cells by SH-Based Silane Interface Modification

Air-processed perovskite solar cells (PSCs) with high photoelectric conversion efficiency (PCE) can not only further reduce the production cost but also promote its industrialization. During the preparation of the PSCs in ambient air, the contact of the buried interface not only affects the crystallization of the perovskite film but also affects the interface carrier transport, which is directly related to the performance of the device. Here, we optimize the buried interface by introducing 3-mercaptopropyltrimethoxysilane (MPTMS, (CH3O)3Si(CH2)3SH) on the nickel oxide (NiOx) surface. The crystallization of the perovskite film is improved by enhancing surface hydrophobicity; besides, the SH-based functional group of MPTMS passivates the uncoordinated lead at the interface, which effectively reduces the defects at the bottom interface of perovskite and inhibits the nonradiative recombination at the interface. Moreover, the energy level between the NiOx layer and the perovskite layer is better matched. Based on multiple functions of MPTMS modification, the open circuit voltage of the device is obviously improved, and efficient air-processed methylamine-free (MA-free) PSCs are realized with PCE reaching 21.0%. The device still maintains the initial PCE of 85% after 1000 h aging in the glovebox. This work highlights interface modification in air-processed MA-free PSCs to promote the industrialization of PSCs.

Phase-Engineering of Layered Nickel Hydroxide for Synthesizing High-Quality NiOx Nanocrystals for Efficient Inverted Flexible Perovskite Solar Cells

Nickel oxide (NiOx) nanocrystals have been widely used in inverted (p-i-n) flexible perovskite solar cells (fPSCs) due to their remarkable advantages of low cost and outstanding stability. However, anion and cation impurities such as NO3- widely exist in the NiOx nanocrystals obtained from calcinated nickel hydroxide (Ni(OH)2). The impurities impair the photovoltaic performance of fPSCs. In this work, we report a facile but effective way to reduce the impurities within the NiOx nanocrystals by regulating the Ni(OH)2 crystal phase. We add different alkalis, such as organic ammonium hydroxide and alkali metal hydroxides, to nickel nitrate solutions to precipitate layered Ni(OH)2 with different crystalline phase compositions (α and β mixtures). Especially, Ni(OH)2 with a high β-phase content (such as from KOH) has a narrower crystal plane spacing, resulting in fewer residual impurity ions. Thus, the NiOx nanocrystals, by calcinating the Ni(OH)x with excess β phase from KOH, show improved performance in inverted fPSCs. A champion power conversion efficiency (PCE) of 20.42% has been achieved, which is among the state-of-art inverted fPSCs based on the NiOx hole transport material. Moreover, the reduced impurities are beneficial for enhancing the fPSCs' stability. This work provides an essential but facile strategy for developing high-performance inverted fPSCs.

Opportunities and challenges of hole transport materials for high-performance inverted hybrid-perovskite solar cells

Inverted perovskite solar cells (inverted-PSCs) have exhibited advantages of longer stability, less hysteresis, and lower fabrication temperature when compared to their regular counterparts, which are important for industry commercialization. Because of the great efforts that have been conducted in the past several years, the obtained efficiency of inverted-PSCs has almost caught up with that of the regular ones, 25.0% versus 25.7%. In this perspective, the recent studies on the design of high-performance inverted-PSCs based on diverse hole transport materials, as well as device fabrication and characterization are first reviewed. After that, the authors moved on to the interface and additive engineering that were exploited to suppress the nonradiative recombination. Finally, the challenges and possible research pathways for facilitating the industrialization of inverted-PSCs were envisaged.

Multifunctional Hybrid Interfacial Layers for High-Performance Inverted Perovskite Solar Cells

Challenges remain hindering the performance and stability of inverted perovskite solar cells (PSCs), particularly for the nonstable interface between lead halide perovskite and charge extraction metal oxide layer. Herein, a simple yet scalable interfacial strategy to facilitate the assemble of high-performance inverted PSCs and scale-up modules is reported. The hybrid interfacial layer containing self-assembly triphenylamine and conjugated poly(arylamine) simultaneously improves the chemical stability, charge extraction, and energy level alignment of hole-selective interface, meanwhile promoting perovskite crystallization. Consequently, the correspondent inverted PSCs and modules achieve remarkable power conversion efficiencies (PCEs) of 24.5% and 20.7% (aperture area of 19.4 cm² ), respectively. The PSCs maintain over 80% of its initial efficiency under one-sun equivalent illumination of 1200 h. This strategy is also effective to perovskite with various bandgaps, demonstrating the highest PCE of 19.6% for the 1.76-eV bandgap PSCs. Overall, this work provides a simple yet scalable interfacial strategy for obtaining state-of-the-art inverted PSCs and modules.

Solution-Processable NiOx:PMMA Hole Transport Layer for Efficient and Stable Inverted Organic Solar Cells

For organic solar cells (OSCs), nickel oxide (NiO_x) is a potential candidate as the hole transport layer (HTL) material. However, due to the interfacial wettability mismatch, developing solution-based fabrication methods of the NiO_x HTL is challenging for OSCs with inverted device structures. In this work, by using N, N-dimethylformamide (DMF) to dissolve poly(methyl methacrylate) (PMMA), the polymer is successfully incorporated into the NiO_x nanoparticle (NP) dispersions to modify the solution-processable HTL of the inverted OSCs. Benefiting from the improvements of electrical and surface properties, the inverted PM6:Y6 OSCs based on the PMMA-doped NiO_x NP HTL achieves an enhanced power conversion efficiency of 15.11% as well as improved performance stability in ambient conditions. The results demonstrated a viable approach to realize efficient and stable inverted OSCs by tuning the solution-processable HTL.

Surface-Energy-Regulated Growth of α-Phase Cs0.03 FA0.97 PbI3 for Highly Efficient and Stable Inverted Perovskite Solar Cells

Methylammonium (MA)-free formamidinium (FA)-dominated Cs_x FA_1-x PbI₃ is rising as the most promising candidate for highly efficient and stable perovskite solar cells. However, the growth of high-quality Cs_x FA_1-x PbI₃ black-phase perovskite structure without ion doping in the lattice remains a challenge. Herein, propeller-shaped halogenated tertiary ammonium is synthesized, showing high binding energy on the perovskite surface and large steric hindrance. This molecule can significantly reduce the barrier of high surface energy that suppresses the growth of the α-phase Cs_x FA_1-x PbI₃ structure. As a result, the α-phase structure can be formed at room temperature, which can further act as a seed for the growth of high-quality film. Solar cells based on the film show a record efficiency up to 23.6% for MA free Cs_x FA_{1- x} PbI₃ solar cells with inverted structure and excellent stability at 85 °C over 200 h.

Suppressing Nickel Oxide/Perovskite Interface Redox Reaction and Defects for Highly Performed and Stable Inverted Perovskite Solar Cells

The inorganic hole transport layer of nickel oxide (NiO_x ) has shown highly efficient, low-cost, and scalable in perovskite photovoltaics. However, redox reactions at the interface between NiO_x and perovskites limit their commercialization. In this study, ABABr (4-(2-Aminoethyl) benzoic acid bromide) between the NiO_x and different perovskite layers to address the issues has been introduced. How the ABABr interacts with NiO_x and perovskites is experimentally and theoretically investigated. These results show that the ABABr molecule chemically reacts with the NiO_x via electrostatic attraction on one side, whereas on the other side, it forms a strong hydrogen bond via the NH₃ ⁺ group with perovskites layers, thus directly diminishing the redox reaction between the NiO_x and perovskites layers and passivating the layer surfaces. Additionally, the ABABr interface modification leads to significant improvements in perovskite film morphology, crystallization, and band alignment. The perovskites solar cells (PSCs) based on an ABABr interface modification show power conversion efficiency (PCE) improvement by over 13% and maintain over 90% of its PCE after continuous operation at maximum power point for over 500 h. The work not only contributes to the development of novel interlayers for stable PSCs but also to the understanding of how to prevent interface redox reactions.

Modulating the Electron Transporting Properties of Subphthalocyanines for Inverted Perovskite Solar Cells

The lack of organic non-fullerene ETMs with good electron transport and device stability is an important problem for the further development and commercialization of perovskite solar cells. Herein, the use of SubPcs as ETMs in PSCs is explored. To this end, we analyze the influence of SubPc peripheral functionalization on the efficiency and stability of p-i-n PSCs. Specifically, ETMs based on three SubPcs (with either six or twelve peripheral fluorine and chlorine atoms) have been incorporated into PSCs with the perovskite layer deposited by solution processing (CsFAMAPbIBr). The device performance and morphology of these devices are deeply analyzed using several techniques, and the interfacial effects induced by the SubPcs are studied using photoluminescence and TR-PL. It is observed that the device stability is significantly improved upon insertion the SubPc layer. Moreover, the impact of the SubPc layer-thickness is assessed. Thus, a maximum power conversion efficiency of 13.6% was achieved with the champion device.

Critical Role of Removing Impurities in Nickel Oxide on High-Efficiency and Long-Term Stability of Inverted Perovskite Solar Cells

The performance enhancement of inverted perovskite solar cells applying nickel oxide (NiO_x ) as the hole transport layer (HTL) has been limited by impurity ions (such as nitrate ions). Herein, we have proposed a strategy to obtain high-quality NiO_x nanoparticles via an ionic liquid-assisted synthesis method (NiO_x -IL). Experimental and theoretical results illustrate that the cation of the ionic liquid can inhibit the adsorption of impurity ions on nickel hydroxide through a strong hydrogen bond and low adsorption energy, thereby obtaining NiO_x -IL HTL with high conductivity and strong hole-extraction ability. Importantly, the removal of impurity ions can effectively suppress the redox reaction between the NiO_x film and the perovskite film, thus slowing down the deterioration of device performance. Consequently, the modified inverted device shows a striking efficiency exceeding 22.62 %, and superior stability maintaining 92 % efficiency at a maximum power point tracking under one sun illumination for 1000 h.

Enhanced p-Type Conductivity of NiOx Films with Divalent Cd Ion Doping for Efficient Inverted Perovskite Solar Cells

The effect of substitutional metal dopants in NiO_x on the structural and electronic structures is of great interest, particularly for increasing the p-type conductivities as a hole transport layer (HTL) applied in perovskite solar cells (PSCs). In this paper, experimental fabrications and density functional theory calculations have been carried out on Cd-doped NiO_x films to examine the effect of divalent doping on the electronic and geometric structures of NiO_x. The results indicate that divalent Cd dopants reduced the formation energy of the Ni vacancy (V_Ni) and created more V_Ni in the films, which enhanced the p-type conductivity of the NiO_x films. In addition, Cd doping also deepened the valence band edge, reduced the monomolecular Shockley-Read-Hall (SRH) recombination losses, and promoted hole extraction and transport. Hence, the PSCs with Cd:NiO_x HTLs manifest a high efficiency of 20.47%, a high photocurrent density of 23.00 mA cm^-2, and a high fill factor of 79.62%, as well as negligible hysteresis and excellent stability. This work illustrates that divalent elements such as Cd, Zn, Co, etc. may be potential dopants to improve the p-type conductivity of the NiO_x films for applications in highly efficient and stabilized PSCs.

Interface Regulation by an Ultrathin Wide-Bandgap Halide for Stable and Efficient Inverted Perovskite Solar Cells

The nonradiative recombination between hole transport layers (HTLs) and perovskites generally leads to obvious energy losses. The trap states at the HTL/perovskite interface directly influence the improvement of the power conversion efficiency (PCE) and stability. Interface regulation is a simple and commonly used method to decrease nonradiative recombination in inverted perovskite solar cells (PSCs). Here, a wide-bandgap halide was used to regulate the PTAA/MAPbI₃ interface, in which n-hexyltrimethylammonium bromide (HTAB) was used to modify the upper surface of poly[bis(4-phenyl)-(2,4,6-trimethylphenyl)amine] (PTAA). Upon introduction of the HTAB layer, the contact between PTAA and MAPbI₃ is strengthened, the defect state density in PSCs is reduced, the MAPbI₃ crystallinity is improved, and the nonradiative recombination loss is suppressed. The device with HTAB delivers the highest PCE of 21.01% with negligible hysteresis, which is significantly higher than that of the control device (17.71%), and it maintains approximately 87% of its initial PCE for 1000 h without encapsulation in air with a relative humidity of 25 ± 5%. This work reveals an effective way of using a wide-bandgap halide to regulate the PTAA/MAPbI₃ interface to simultaneously promote the PCE and stability of PSCs.

Methods of Stability Control of Perovskite Solar Cells for High Efficiency

The increasing demand for renewable energy devices over the past decade has motivated researchers to develop new and improve the existing fabrication techniques. One of the promising candidates for renewable energy technology is metal halide perovskite, owning to its high power conversion efficiency and low processing cost. This work analyzes the relationship between the structure of metal halide perovskites and their properties along with the effect of alloying and other factors on device stability, as well as causes and mechanisms of material degradation. The present work discusses the existing approaches for enhancing the stability of PSC devices through modifying functional layers. The advantages and disadvantages of different methods in boosting device efficiency and reducing fabrication cost are highlighted. In addition, the paper presents recommendations for the enhancement of interfaces in PSC structures.

Device Modeling and Design of Inverted Solar Cell Based on Comparative Experimental Analysis between Effect of Organic and Inorganic Hole Transport Layer on Morphology and Photo-Physical Property of Perovskite Thin Film

It is crucial to find a good material as a hole transport layer (HTL) to improve the performance of perovskite solar cells (PSCs), devices with an inverted structure. Polyethylene dioxythiophene-poly (styrene sulfonate) (PEDOT:PSS) and inorganic nickel oxide (NiOx) have become hotspots in the study of hole transport materials in PSCs on account of their excellent properties. In our research, NiOx and PEDOT: PSS, two kinds of hole transport materials, were prepared and compared to study the impact of the bottom layer on the light absorption and morphology of perovskite layer. By the way, some experimental parameters are simulated by wx Analysis of Microelectronic and Photonic Structures (wxAMPS). In addition, thin interfacial layers with deep capture levels and high capture cross sections were inserted to simulate the degradation of the interface between light absorption layer and PEDOT:PSS. This work realizes the combination of experiment and simulation. Exploring the mechanism of the influence of functional layer parameters plays a vital part in the performance of devices by establishing the system design. It can be found that the perovskite film growing on NiOx has a stronger light absorption capacity, which makes the best open-circuit voltage of 0.98 V, short-circuit current density of 24.55 mA/cm2, and power conversion efficiency of 20.01%.

Ultrathin polymethylmethacrylate interlayers boost performance of hybrid tin halide perovskite solar cells

Introducing a polymethylmethacrylate (PMMA) layer at the (PEA)0.2(FA)0.8SnI3 perovskite/hole transport layer interface leads to a remarkable improvement in the photogenerated current density and fill factor, resulting in an increase in the power conversion efficiency from 6.5% to 10%. PMMA is proposed to mitigate interfacial charge losses and to induce a more favourable distribution of 2D perovskite phases, elucidating a pathway towards the development of high-performance tin-based perovskite solar cells.